RE: [Asterisk-Users] Problem receiving a fax with RxFAX
If you need it I can drop you. -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of Julian Pawlowski Sent: Monday, May 24, 2004 1:26 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Problem receiving a fax with RxFAX Hello, I have asterisk CVS-04/08/04-10:06:15 and spandsp 0.0.1. Where did you get it? I'd like to take a chance on it too ;-) I have tried to look for a newer version of the spandsp stuff, but opencall.org does not seem to exist in DNS any more. (If it's moved location, can someone please update the Wiki - http://www.voip-info.org/wiki-Asterisk+fax ??) No, the domain seems not to be moved. The registry has still it's information listed. Is seems that the complete provider located in Hong Kong is disconnected for a longer while so that the TTL is expired. Weird... I could not find any alternatives via google... Regards, Julian ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] G729A problem
Hi all, Unable to find translation path. How to fix ? May 20 18:22:49 NOTICE[1224059824]: channel.c:1508 ast_set_read_format: Unable to find a path from G729A to ULAW May 20 18:22:49 NOTICE[1224059824]: channel.c:1478 ast_set_write_format: Unable to find a path from ULAW to G729A May 20 18:20:47 NOTICE[1232452528]: channel.c:1508 ast_set_read_format: Unable to find a path from G729A to ULAW May 20 18:20:47 NOTICE[1232452528]: channel.c:1478 ast_set_write_format: Unable to find a path from SLINR to G729A
RE: [Asterisk-Users] Grandstream v1.0.4.68 firmware
I was trying to replace the header. But looks like header contains some kind of CRC -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of Thomas Gallaway Sent: Tuesday, May 18, 2004 3:39 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Grandstream v1.0.4.68 firmware Mikael Andersson wrote: Thomas Gallaway -- wrote on den 17 maj 2004 16:57: Hmmm well I need to kinda figure out how to get the custom ringtones to ring on the phone... :-) ___ Asterisk-Users or how to change them /M Yeah I can change them in the firmware, but I wonder if there is an option in asterisk to pass to have it do a certain ring if the call is internal, or external. The format the rings are at are after what I found out uLaw compressed 8bit 8000hz mono samples. But they also have a header infront of the file. I will play arround with it later. Maybe there is a way to chop off the header of the ones that come with it and put it infront of a regular file. -- Thomas ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] IAX2
What does it mean ? May 2 20:37:21 WARNING[1205250992]: chan_iax2.c:2515 iax2_send: Out of trunk data space on call number 16386, dropping Asterisk CVS-05/02/04-23:04:14 built by [EMAIL PROTECTED] on a i686 running Linux from cvs checkout -r v1-0_stable asterisk
Re: [Asterisk-Users] TxFax/SpanDSP problems
Hi Eric and Steve :) My fax numbers (both Canon faxes) 3717201651 3726062501 - Original Message - From: Eric Wieling [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, April 24, 2004 8:46 PM Subject: Re: [Asterisk-Users] TxFax/SpanDSP problems On Sat, 2004-04-24 at 12:38, Steve Underwood wrote: Most Canon models seem to be working OK. Serge's Canon drops the line every time during negotiation, as though it has decided spandsp doesn't support compatible capabilities. It is not clear why this is happening, though. The modes which spandsp is asking to use are the most widely used ones. I think this must be a model specific issue. I can give you the number to our Cannon fax machines that have problems if you want. Or I can give you the audio files generated by spandsp, or anything else you need to get this fixed. I might even be able to find an older machine that exhibits the problem we I can ship to you for testing. I don't suppose a bribe would help? 8-) --Eric -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] H323 error
While calling to H323 peer *CLI 1:22:59.944 H225 Caller:81e5c48 assert.cxx(105) PWLib Assertion fail: Invalid array element, file /root/pwlib/include/ptlib/array.h, line 1183, Error=115 Abort, Core dump, Ignore?*CLI *CLI show versionAsterisk CVS-04/22/04-23:56:01 built by [EMAIL PROTECTED] on a i686 running Linux*CLI
Re: [Asterisk-Users] SIP/IAX termination provider in NZ
I can provide low-priced termination service using *. Write me offlist for more info. - Original Message - From: Simon Brown [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, April 23, 2004 2:26 AM Subject: [Asterisk-Users] SIP/IAX termination provider in NZ I am looking for a SIP/IAX termination provider in New Zealand. Does anyone know of one? TIA Simon ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TxFax/SpanDSP problems
Hi Eric ! I have the same problem with Canon fax mashine as you have. I have wrote an email to Steve (developer of spandsp) some weeks ago and got no answer how to fix the problem :( Looks like connection was dropped by fax mashine without any reason - Original Message - From: Eric Wieling [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, April 21, 2004 6:19 PM Subject: [Asterisk-Users] TxFax/SpanDSP problems I'm getting the following when sending to a specific fax machine. Any ideas? File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif' Changed from phase 0 to 2 Slow carrier up Slow carrier down Slow carrier up NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56 49 4e 47 54 00 67 00 80 80 80 0c 01 02 NSF without final frame tag The remote is made by 'Canon' DIS: 80 20 ee 88 c4 80 95 80 80 80 38 DIS with final frame tag In state 10 DIS: V.8 capable Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter, V.29 and V.17 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) and B4 (364mm) Receiver's minimum scan line time: 20ms at 3.85 l/mm: T7.7 = T3.85 Error correction mode T.6 coding R8x15.4lines/mm OK R16x15.4lines/mm and/or 400x400pels/25.4 mm OK Metric-based resolution preferred Minimum scan line time for higher resolutions: T15.4 = T7.7 North American Letter (215.9mm x 279.4mm) North American Legal (215.9mm x 355.6mm) Single-progression sequential coding (Rec. T.85) basic DCS: Selected data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 20ms Start sending document Start tx document - compression 2 Fine mode Changed from phase 2 to 4 Sending ident TSI: 43 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DCS: 83 00 c4 00 HDLC underflow in state 3 Changed from phase 4 to 6 Changed from phase 6 to 3 Slow carrier up XCN: fa XCN with final frame tag In state 4 Disconnecting Changed from phase 3 to 7 Changed from phase 7 to 8 -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] SIP problem
When calling from Zap (E100P) to ATA186 (SIP) * hanged up... below is 'show channels' command output: Channel (Context Extension Pri ) State Appl. Data SIP/565-adc3 (voip 1 ) Up AppDial (Outgoing Line) Zap/31-1 (incoming 565 2 ) Ringing Dial SIP/565|60|r
[Asterisk-Users] Re: SoftFAX/spandsp
Hi Steve and all ! Unable tosend fax from * to a fax machine... File name is '/root/faxes/8400100-1081935748.808.tif'Changed from phase 0 to 2Slow carrier upSlow carrier downSlow carrier up NSF: 20 00 00 11 80 00 8a 49 10 43 53 43 20 54 45 4c 45 43 4f 4d 20 20 20 20 20 00 7b 00 80 80 80 06 01 01 01 01NSF without final frame tagThe remote is made by 'Canon' CSI: 40 31 35 36 31 30 32 37 31 37 33 30 30 20 20 20 20 20 20 20 20CSI without final frame tagRemote fax gave CSI as: "003717201651" DIS: 80 00 ee a8 c4 80 10DIS with final frame tagIn state 10DIS:Preferred octets: 256Can receive faxSupported data signalling rates: V.27ter, V.29 and V.17R8x7.7lines/mm and/or 200x200pels/25.4mm OK2D coding OKScan line length: 215mmRecording length: A4 (297mm) and B4 (364mm)Receiver's minimum scan line time: 10ms at 3.85 l/mm: T7.7 = T3.85Error correction modeT.6 codingMetric-based resolution preferredMinimum scan line time for higher resolutions: T15.4 = T7.7DCS:Selected data signalling rate: V.29, 9600bps2D coding OKScan line length: 215mmRecording length: A4 (297mm)Minimum scan line time: 10msStart sending documentStart tx document - compression 2Fine modeChanged from phase 2 to 4Sending ident TSI: 43 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DCS: 83 00 c4 20HDLC underflow in state 3Changed from phase 4 to 6Changed from phase 6 to 3Slow carrier up XCN: faXCN with final frame tagIn state 4DisconnectingChanged from phase 3 to 7Changed from phase 7 to 8
[Asterisk-Users] Noises and echo effects
Hi! I need your advice. My problem is that I have very bad sound quality calling to cellular phone via asterisk router.There are some kind of noises and echo effects when you try to speak louder. I have the following components in my call routing schema:- PBX with E1 port.- asterisk router with TE405P card(32bit/4 E1 ports).- Teles server with PRI interface card(3 E1 ports) and VTM interface card (4GSM) I have 2 call routing schemas: (PBX[E1])--(*[E1])--(TELES PRI + VTM CARD)=[cellular] (1) (PBX[E1])--(TELES PRI + VTM CARD)=[cellular] (2) As you see the difference between (1) and (2) is intermediate asterisk router.Using (2) I have acceptible(good) sound quality, but using (1) I'v got noises and echoes on the cellular's side.Asterisk connected with Teles server by the means of the cable. Cable length is less than 50 santimeters.Cable is not the root of the problem. The have already checked this possibility.We got a lot of solutions based on asterisk and all the calls have good sound quality. The only exception is for (1). What do you think what is the root of my problem?I also tryed to modify variouse parametrs values in my zapata.conf to solve the problem. Useless. Here is my zaptel.conf span=1,1,0,ccs,hdb3,crc4span=2,1,0,ccs,hdb3,crc4span=3,0,0,ccs,hdb3,crc4span=4,0,0,ccs,hdb3,crc4# Span 1bchan=1-15dchan=16bchan=17-31# Span 2bchan=32-46dchan=47bchan=48-62# Span 3bchan=63-77dchan=78bchan=79-93# Span 4bchan=94-108dchan=109bchan=110-124 loadzone=usdefaultzone=us and zapata.conf [channels]switchtype=euroisdncontext=emptysignalling=pri_netechocancel=yesechocancelwhenbridged=yesechotraining=yesoverlapdial=yesusecallerid=yesusecallingpres=yeshidecallerid=notransfer=nothreewaycalling=nocallwaiting=nocallwaitingcallerid=nocallreturn=norxgain=0.0txgain=0.0pridialplan=unknown CUT - group=4context=group4signalling=pri_cpeimmediate=noechocancel=yesechocancelwhenbridged=yesechotraining=yesoverlapdial=nojitterbuffers=0channel = 94-108channel = 110-124
[Asterisk-Users] Bluetooth
Where i can download bluetooth support for * ?
[Asterisk-Users] FAX Sending
How to send fax to analogue device via PRI card (E100P) using * ?Should I use any kind of emulation software or something like this?
[Asterisk-Users] Fax
How to send fax to analogue Fax device via PRI card (TE405P) from * ? Should I use any kind of Fax emulation software or something like this? ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
