Re: [Asterisk-Users] Frustrated with echo...
you just have to run fxotune and get it to tone down the lines http://www.voip-info.org/wiki/view/Asterisk+fxotune j Kevin P. Fleming wrote: Lorentz Hinrichsen wrote: I've had very poor results with the Digium cards, I am using a couple of the new Sangoma ones now (they are cheaper and have hardware echo cancellation). Which boards are cheaper _and_ have hardware echo cancellation? ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Re: Cisco 7970
Yes, my mistake in /tftpboot/SEPMAC.cnf.xml. Having said that, Please double check that you have set the line: permit=192.168.1.90/255.255.255.255 ; This device can register only using this ip address or in your case: permit=10.0.0.175 /255.255.255.255 ; This device can register only using this ip address in the /etc/asterisk/sccp.conf. The TFTP errors are related to automatically updating firmware, custom ringtones, and what I believe is SCCP encryption support which is not necessary. J Tomislav ParĨina wrote: In article [EMAIL PROTECTED], [EMAIL PROTECTED] says... Best bet is to get Asterisk Chan_Sccp http://chan-sccp.berlios.de/ 1.) setup your /etc/asterisk/sccp.conf with something like: 2.) setup lines 30/31 as a custom extension in astersik (i used amp) and had it dial SCCP/30 and SCCP/31 as needed 3.) setup /tftpboot config for SEPMAC.xml First thank you for your mail and instructions that you have provide to me. Now, I have done everything you said except and 3.) file name isn't SEPMAC.xml but SEPMAC.cnf.xml When Cisco 7970 boots up it looks for this on tftp. 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting CTLSEP0016C87754CE.tlv : File does not exist 27.3.2006 15:24 :Sending SEP0016C87754CE.cnf.xml to (10.0.0.175) 27.3.2006 15:24 :Sent SEP0016C87754CE.cnf.xml to (10.0.0.175), 2312 bytes 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting loads : File does not exist 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting td-sccp.jar : File does not exist 27.3.2006 15:24 :TFTP Error from 10.0.0.175 requesting g3-tones.xml : File does not exist 7970 had this firmware version: Load File: TERM70.DEFAULT App Load ID: Jar70.2-9-1-45.sbn JVM Load ID: CVM70.2-0-1-45.sbn OS Load ID: cnu70.2-7-5-50.sbn Boot Load ID: 7970_64060118.bin The problem is that 7970 never registers to *. I have entered asterisk IP address at 2 places in SEPMAC.cnf.xml. *CLI show channeltypes TypeDescriptionDevicestate Indications Transfer -- ------ --- MGCPMedia Gateway Control Protocol no yes no SIP Session Initiation Protocol (S yes yes yes Feature Feature Proxy Channel Driver no yes no Agent Call Agent Proxy Channel yes yes no Phone Standard Linux Telephony API D no no no Zap Zapata Telephony Driverno yes no Local Local Proxy Channel Driver no yes no IAX2Inter Asterisk eXchange Driver yes yes yes SCCPSkinny Client Control Protocol yes yes no Seams that SCCP is installed correctly. But phone never registers (on lover left corner of 7970 I have circle/clock and word Registering). *CLI sccp show devicestypes NAME ADDRESS MAC Reg. State === == *CLI Have I done something wrong? -- Tomislav Parcina tparcina#lama.hr ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Dell 2850 w/TDM2400?
no, fxs ports require you to use a 4-pin molex connector to power the pci card to generate ring voltages from the power supply. most dell/hp/whoever small form-factor units don't provide this, unless you can kludge something up from a splitter or power bus feeding a drive backplane or something of the sort. j Nick Hoffman wrote: On Tue March 28 2006 10:33, Kevin P. Fleming [EMAIL PROTECTED] wrote: Kerry Garrison wrote: Does anyone know if a TDM2400 will fit into a Dell 2850? It will fit, but you will need to solve the power supply problem if you intend to use FXS ports on it :-) Why is that? Do FXS ports draw large amounts of power? How about FXO ports? -- Nick e: [EMAIL PROTECTED] p: +61 7 5591 3588 f: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Cisco 7970
Best bet is to get Asterisk Chan_Sccp http://chan-sccp.berlios.de/ 1.) setup your /etc/asterisk/sccp.conf with something like: [devices] type= 7970 ; device type (see below) autologin = 30,31, ; lines list. You can add an empty line for an empty button (7960, 7970, 7940, 7920) description = jj7970; internal description. Not important tzoffset = -9 transfer = on ; enable or disable the transfer capability. It does remove the transfer softkey park = on ; take a look to the compile howto. Park stuff is not compiled by default speeddial = ; you can add an empty speedial if you want an empty button (7960, 7970, 7920) speeddial = *97,voicemail, cfwdall = off ; activate the callforward stuff and softkeys cfwdbusy = off dtmfmode = inband ; inband or outofband. outofband is the native cisco dtmf tone play. ; Some phone model does not play dtmf tones while connected (bug?), so the default is inband imageversion = P00405000700 ; useful to upgrade old firmwares (the ones that do not load *.xml from the tftp server) deny=0.0.0.0/0.0.0.0; Same as general permit=192.168.1.90/255.255.255.255 ; This device can register only using this ip address dnd = on; turn on the dnd softkey for this device. Valid values are off, on (busy signal), reject (busy signal), silent (ringer = silent) trustphoneip = no ; The phone has a ip address. It could be private, so if the phone is behind NAT ; we don't have to trust the phone ip address, but the ip address of the connection ;earlyrtp = none; valid options: none, offhook, dial, ringout. default is none. ; The audio strem will be open in the progress and connected state. private = on; permit the private function softkey for this device mwilamp = on; Set the MWI lamp style when MWI active to on, off, wink, flash or blink mwioncall = off ; Set the MWI on call. device = SEP00131A1F6366 ; device name SEPMAC [lines] id = 30; future use pin = 1234 ; future use label = 30; button line label (7960, 7970, 7940, 7920) description = Line 30 ; top diplay description context = from-internal ; sccp incominglimit = 2 ; more than 1 incoming call = call waiting. transfer = on ; per line transfer capability. on, off, 1, 0 mailbox = 30; voicemail.conf (syntax: [EMAIL PROTECTED]:folder]) vmnum = *97 ; speeddial for voicemail administration, just a number to dial cid_name = JJJ ; caller id name cid_num = 30 trnsfvm = 1000 ; extension to redirect the caller (e.g for voicemail) secondary_dialtone_digits = 9 ; digits for the secondary dialtone (max 9 digits) secondary_dialtone_tone = 0x21 ; outside dialtone musicclass=default ; Sets the default music on hold class language=en ; Default language setting ;accountcode=79501 ; accountcode to ease billing rtptos = 184; sets the the rtp packets TOS for this line echocancel = on ; sets the phone echocancel for this line silencesuppression = off; sets the silence suppression for this line ;callgroup=1,3-4; We are in caller groups 1,3,4. Valid for this line ;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5. Valid for this line ;amaflags = ; Sets the default AMA flag code stored in the CDR record for this line line = 30 (do the same for line 31) 2.) setup lines 30/31 as a custom extension in astersik (i used amp) and had it dial SCCP/30 and SCCP/31 as needed 3.) setup /tftpboot config for SEPMAC.xml device xsi:type=axl:XIPPhone devicePool nameDefault/name dateTimeSetting nameCMLocal/name dateTemplatey-M-D/dateTemplate timeZoneW. Europe Standard/Daylight Time/timeZone /dateTimeSetting callManagerGroup members member priority=0 callManager ports ethernetPhonePort2000/ethernetPhonePort /ports processNodeName(ASTERISK IP HERE)/processNodeName /callManager /member /members /callManagerGroup srstInfo nameEnable/name srstOptionEnable/srstOption userModifiabletrue/userModifiable ipAddr1(ASTERISK IP HERE)/ipAddr1 port12000/port1 ipAddr2/ipAddr2
Re: [Asterisk-Users] WiFi phones and WDS (Wireless Distribution System)
the cisco 7920 with the latest firmware supports WPA-psk using the AKM for auth. it is important to turn off CDP discovery otherwise it will crash other cisco sccp phones connected to asterisk - advaned menu: Menu, *, #, #, Send (green phone icon) - network config and disable cdp tx haven't had a chance to roam with it just yet, but it works fine. j Cory Andrews wrote: There are a number of phones that support WPA, including the UTStarcom F1000G and F3000, and the Linksys WIP300 and WIP330, although current availability on these products is scarce. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users