Re: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
Steve Prior wrote: I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Sounds like you got the one we just sent back to Sipura a couple weeks ago. Try to update the firmware again; if that fails I'd suggesting contacting Sipura for an RMA. The one we had seemed heat induced. It would work fine for a few minutes and then just die (but always still responded to pings). No calls and no web interface would work until it was unplugged and cooled down. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
I saw such wired behaviours on several SPAs. I think this is caused defect flash. We sent our SPAs back and got a new HW Version. regards klaus Steve Prior wrote: I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits. Thanks Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits. Thanks Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
Run nmap against the ip address and see what ports are active for tcp service. Maybe you can connect via a different port (I know it should be 80), and see if the configuration is different between voice and web dave On Tue, 2005-05-10 at 21:50 -0400, Steve Prior wrote: I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits. Thanks Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
I have a SPA-3000 and Netgear switch; when I run an upgrade on SPA-3000 with Netgear switch in between my SPA-3000 stopped functioning; I send it back and got a new unit. However, later on I run onto a post (on Voxilla) that warned not to use Netgear switch to upgrade Sipura unit. Indeed, I use my old hub to upgrade the new unit and it went smooth. -- #Joseph On Tue, 2005-05-10 at 21:50 -0400, Steve Prior wrote: I just got a refurb Sipura SPA-2000 and was able to assign it an IP address with DHCP and ping the device, but then I ran the firmware upgrade utility to bring it up to spa2k-2.0.13g which seemed to work just fine, but after it rebooted I cannot connect to its webserver for configuration. I can still ping the unit. When I use the built in voice menu it reads back the right IP address, webserver port, and claims the webserver is enabled, but I can't connect to port 80 on the device and running the firmware upgrade utility says that it cannot connect to the unit either. Has anyone seen something like that and is there a fix? A google search didn't turn up any apparent hits. Thanks Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIPURA SPA-2000 webserver dead after firmware upgrade
David Boyd wrote: Run nmap against the ip address and see what ports are active for tcp service. Maybe you can connect via a different port (I know it should be 80), and see if the configuration is different between voice and web dave Good suggestion, unfortunatly I didn't like the results: root:~# nmap -p 1- sipura2 Starting nmap 3.50 ( http://www.insecure.org/nmap/ ) at 2005-05-10 22:24 EDT All scanned ports on sipura2 (192.168.0.32) are: closed Nmap run completed -- 1 IP address (1 host up) scanned in 3.427 seconds root:~# ping sipura2 PING sipura2 (192.168.0.32): 56 octets data 64 octets from 192.168.0.32: icmp_seq=0 ttl=250 time=0.8 ms 64 octets from 192.168.0.32: icmp_seq=1 ttl=250 time=0.8 ms --- sipura2 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.8/0.8/0.8 ms Steve ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users