Re: [Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines
Thanks Steve for the info. that was certainly very helpful! I shall see if PCCW will b*tch about it. Hopefully not! By the way, have you tried DID on IDA-P on any carriers in HK? NTT, HGC, NWT? David - Original Message - From: Steve Underwood [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, January 21, 2004 3:53 AM Subject: Re: [Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines Hi David, David Liu wrote: Hi there, Anyone had any success deploying Asterisk with a T100P or T400P card in Hong Kong? To my understanding, Hong Kong carriers only provide IDA-P or IDA-M lines. I am looking to use IDA-P. Is this possible with the card? I know Cisco 2651XMV with a VIC card can do it. But that's just way too expensive! IDA-M is robbed bit signalling. It comes in several forms in HK which are functionally equivalent to the US, but use different names. * should work OK with these. IDA-P is the 5ESS ISDN protocol. Again * should work OK. I haven' t tried * with real PCCW T1 lines, but its unlikely there will be any problems. The Digium cards are not approved in HK, and PCCW make ask what cards you intend to attach (sometimes they do, and sometimes they don't). Regards, Steve ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines
Hi David, David Liu wrote: Hi there, Anyone had any success deploying Asterisk with a T100P or T400P card in Hong Kong? To my understanding, Hong Kong carriers only provide IDA-P or IDA-M lines. I am looking to use IDA-P. Is this possible with the card? I know Cisco 2651XMV with a VIC card can do it. But that's just way too expensive! IDA-M is robbed bit signalling. It comes in several forms in HK which are functionally equivalent to the US, but use different names. * should work OK with these. IDA-P is the 5ESS ISDN protocol. Again * should work OK. I haven' t tried * with real PCCW T1 lines, but its unlikely there will be any problems. The Digium cards are not approved in HK, and PCCW make ask what cards you intend to attach (sometimes they do, and sometimes they don't). Regards, Steve ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] T400P / T100P with Hong Kong IDA-P Lines
Hi there, Anyone had any success deploying Asterisk with a T100P or T400P card in Hong Kong? To my understanding, Hong Kong carriers only provide IDA-P or IDA-M lines. I am looking to use IDA-P. Is this possible with the card? I know Cisco 2651XMV with a VIC card can do it. But that's just way too expensive! David ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users