RE: [Asterisk-Users] TE405P Dropping Calls. !! Got I-frame while linkstate 0
I would say it's almost certainly a cabling issue of some sort. We get the S-frame while link down message all the time on our Asterisk clusters due to the way the T1 failover switch works. It's harmless in our case since really the PRI is connected to the other box in the cluster (unless there is a card failure, of course). But for your application, I'm sure you'd like it to be up. :) Regards, - Brad -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Stuart Sent: Thursday, June 22, 2006 6:55 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TE405P Dropping Calls. !! Got I-frame while linkstate 0 Hello we have an * setup using a TE405P with a crossover to a Dialogic PRI card. The machine with the Dialogic card is an automated call generator. The asterisk machine is being used as a test platform to answer the incoming calls play an audio file then record the incoming audio. This set up has been working nicely when the calls were coming in on a SIP channel. However when call come in on the PRI it seems that * randomly drops all channels. Some times every 30 seconds sometimes every 10 minutes. The * CLI will get the errors shown below. I have seen similar postings about this error but found no explanation or solution. The asterisk machine has no shared interrupts. Could this be a cabling issue? Write to 36 failed: Unknown error 500 Short write: 0/15 (Broken pipe) -- Executing Hangup(Zap/2-1, ) in new stack !! Got I-frame while link state 0 -- Hungup 'Zap/2-1' !! Got S-frame while link down !! Frame got rejected! == Primary D-Channel on span 1 up -- Executing Hangup(Zap/1-1, ) in new stack Brian Stuart Edulink Systems, Inc. 1(888)338-7177 ext. 219 http://www.edulinksys.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE405P Dropping Calls. !! Got I-frame while link state 0
Hello we have an * setup using a TE405P with a crossover to a Dialogic PRI card. The machine with the Dialogic card is an automated call generator. The asterisk machine is being used as a test platform to answer the incoming calls play an audio file then record the incoming audio. This set up has been working nicely when the calls were coming in on a SIP channel. However when call come in on the PRI it seems that * randomly drops all channels. Some times every 30 seconds sometimes every 10 minutes. The * CLI will get the errors shown below. I have seen similar postings about this error but found no explanation or solution. The asterisk machine has no shared interrupts. Could this be a cabling issue? Write to 36 failed: Unknown error 500 Short write: 0/15 (Broken pipe) -- Executing Hangup(Zap/2-1, ) in new stack !! Got I-frame while link state 0 -- Hungup 'Zap/2-1' !! Got S-frame while link down !! Frame got rejected! == Primary D-Channel on span 1 up -- Executing Hangup(Zap/1-1, ) in new stack Brian Stuart Edulink Systems, Inc. 1(888)338-7177 ext. 219 http://www.edulinksys.com/ ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TE405P Dropping Calls
Hi, Urgently response would be wonderful, system is a Fedora Core 2. I have a Ericsson BP250 connected to 1 port on the TE405P and another connected to a local telco ISDN30. I have been running CVS-HEAD from about a 2 months ago and upgraded it again just in cause it was a version issue (didn't fix it) but this is what I am getting. When a person calls out from an extension on the BP250 to the outside world, every 2-5 minutes randomly it drops all active calls with the following error on console. == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/2-1' == Spawn extension (te405p-frombp250, 00402270883, 1) exited non-zero on 'Zap/95-1' -- Hungup 'Zap/98-1' == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on 'Zap/7-1' -- Hungup 'Zap/1-1' == Spawn extension (te405p-frombp250, 00417513573, 1) exited non-zero on 'Zap/94-1' -- Hungup 'Zap/97-1' == Spawn extension (te405p-intelstra, 38165965, 2) exited non-zero on 'Zap/6-1' -- Hungup 'Zap/5-1' -- Hungup 'Zap/95-1' -- Hungup 'Zap/7-1' -- Hungup 'Zap/94-1' -- Hungup 'Zap/6-1' !! Got reject for frame 77, retransmitting frame 77 now, updating n_r! !! Got reject for frame 77, retransmitting frame 78 now, updating n_r! !! Got reject for frame 77, retransmitting frame 79 now, updating n_r! !! Got reject for frame 77, retransmitting frame 80 now, updating n_r! !! Got reject for frame 77, retransmitting frame 81 now, updating n_r! If I unplug the ISDN30 from asterisk and plug it directly into the BP250 it works fine no problems. It only just started happening and there have been no changes to the system configuration or setup for over 2 weeks, I am tempted to try and downgrade to 1.0.7. Although the telco did add additional DID's for the ISDN 30, which were added to the extensions.conf, but with them removed it still did the same thing. My configuration files are as follows :- /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,1,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,1,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 loadzone=au /etc/asterisk/zapata.conf [channels] context=default musiconhold=default switchtype=euroisdn usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=0.0 txgain=0.0 group=1 context=te405p-intelstra ;context=te405p-ext pridialplan=local signalling=pri_cpe ;overlapdial=yes callerid=asreceived channel=1-15, 17-31 group=4 context=te405p-frombp250 ;context=te405p-in pridialplan=local signalling=pri_net overlapdial=yes callerid=asreceived channel=94-108, 110-124 /etc/asterisk/extensions.conf [dialstring] exten = i,1,Playback(invalid) exten = i,2,Hangup exten = t,1,Hangup [te405p-frombp250] include = to-sip include = te405p-outtelstra [te405p-tobp250] exten = _2XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _4XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _7XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _1XXX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _73816592XX,1,Dial(Zap/g4/${EXTEN:7},60,r) [te405p-intelstra] exten = s,1,SetMusicOnHold(record) exten = s,2,Dial(SIP/bt-pavilion,45,t) exten = s,4,VoiceMail,u500 exten = s,5,Hangup exten = 38166400,1,SetMusicOnHold(random) exten = 38166400,2,Dial(Zap/g4/9,600,t) exten = 38166400,3,VoiceMail,u500 exten = 38166400,4,Hangup ;Main Number 3282 2922 comes in on 38166483 exten = 38166483,1,SetMusicOnHold(random) exten = 38166483,2,Dial(Zap/g4/9,6000,t) exten = 38166483,3,VoiceMail,u500 exten = 38166483,4,Hangup ;Tempory Number for Darryl exten = 38166488,1,SetMusicOnHold(random) exten = 38166488,2,Dial(Zap/g4/483,6000,t) exten = 38166488,3,VoiceMail,u500 exten = 38166488,4,Hangup exten = 32822922,1,SetMusicOnHold(random) exten = 32822922,2,Dial(Zap/g4/9,600,t) exten = 32822922,3,VoiceMail,u500 exten = 32822922,4,Hangup ;exten = 38166444,1,SetVar(CALLFILENAME=/mnt/asterisk/38166444/${CALLERID}-${TIME STAMP}) ;exten = 38166444,2,Monitor(gsm,${CALLFILENAME},m) exten = 38166444,1,Dial(Zap/g4/9) ;exten = 38166483,1,SetVar(CALLFILENAME=/mnt/asterisk/38166483/${CALLERID}-${TIME STAMP}) ;exten = 38166483,2,Monitor(gsm,${CALLFILENAME},m) ;exten = 38166483,3,Dial(Zap/g4/483) exten = _381684XX,1,SetMusicOnHold(record) exten = _381684XX,2,Dial(Zap/g4/2${EXTEN:-2},600,t) exten = _381684XX,3,VoiceMail,u500 exten = _381684XX,4,Hangup exten = _381659XX,1,SetMusicOnHold(record) exten = _381659XX,2,Dial(Zap/g4/2${EXTEN:-2},6000,t) exten = _381659XX,3,Dial(Zap/g4/211,600,t) exten = _381659XX,4,Hangup [te405p-outtelstra] exten = _00011X.,1,AGI(blockintl.agi|${EXTEN:1}) exten = _01902X.,1,Hangup exten = _0X.,1,Dial(Zap/g1/${EXTEN:1}) exten = _0X.,2,Congestion exten = _0X.,3,Hangup include = dialstring [to-sip]
RE: [Asterisk-Users] TE405P Dropping Calls
Update... Figured out it was a faulty port in the te405p, swapped to a spare port and all it good, now to get warranty. James -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Bean Sent: Saturday, 6 August 2005 10:54 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] TE405P Dropping Calls Hi, Urgently response would be wonderful, system is a Fedora Core 2. I have a Ericsson BP250 connected to 1 port on the TE405P and another connected to a local telco ISDN30. I have been running CVS-HEAD from about a 2 months ago and upgraded it again just in cause it was a version issue (didn't fix it) but this is what I am getting. When a person calls out from an extension on the BP250 to the outside world, every 2-5 minutes randomly it drops all active calls with the following error on console. == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/2-1' == Spawn extension (te405p-frombp250, 00402270883, 1) exited non-zero on 'Zap/95-1' -- Hungup 'Zap/98-1' == Spawn extension (te405p-intelstra, 38166483, 2) exited non-zero on 'Zap/7-1' -- Hungup 'Zap/1-1' == Spawn extension (te405p-frombp250, 00417513573, 1) exited non-zero on 'Zap/94-1' -- Hungup 'Zap/97-1' == Spawn extension (te405p-intelstra, 38165965, 2) exited non-zero on 'Zap/6-1' -- Hungup 'Zap/5-1' -- Hungup 'Zap/95-1' -- Hungup 'Zap/7-1' -- Hungup 'Zap/94-1' -- Hungup 'Zap/6-1' !! Got reject for frame 77, retransmitting frame 77 now, updating n_r! !! Got reject for frame 77, retransmitting frame 78 now, updating n_r! !! Got reject for frame 77, retransmitting frame 79 now, updating n_r! !! Got reject for frame 77, retransmitting frame 80 now, updating n_r! !! Got reject for frame 77, retransmitting frame 81 now, updating n_r! If I unplug the ISDN30 from asterisk and plug it directly into the BP250 it works fine no problems. It only just started happening and there have been no changes to the system configuration or setup for over 2 weeks, I am tempted to try and downgrade to 1.0.7. Although the telco did add additional DID's for the ISDN 30, which were added to the extensions.conf, but with them removed it still did the same thing. My configuration files are as follows :- /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,1,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 span=3,1,0,ccs,hdb3,crc4 bchan=63-77 dchan=78 bchan=79-93 span=4,1,0,ccs,hdb3,crc4 bchan=94-108 dchan=109 bchan=110-124 loadzone=au /etc/asterisk/zapata.conf [channels] context=default musiconhold=default switchtype=euroisdn usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=0.0 txgain=0.0 group=1 context=te405p-intelstra ;context=te405p-ext pridialplan=local signalling=pri_cpe ;overlapdial=yes callerid=asreceived channel=1-15, 17-31 group=4 context=te405p-frombp250 ;context=te405p-in pridialplan=local signalling=pri_net overlapdial=yes callerid=asreceived channel=94-108, 110-124 /etc/asterisk/extensions.conf [dialstring] exten = i,1,Playback(invalid) exten = i,2,Hangup exten = t,1,Hangup [te405p-frombp250] include = to-sip include = te405p-outtelstra [te405p-tobp250] exten = _2XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _4XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _7XX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _1XXX,1,Dial(Zap/g4/${EXTEN},60,r) exten = _73816592XX,1,Dial(Zap/g4/${EXTEN:7},60,r) [te405p-intelstra] exten = s,1,SetMusicOnHold(record) exten = s,2,Dial(SIP/bt-pavilion,45,t) exten = s,4,VoiceMail,u500 exten = s,5,Hangup exten = 38166400,1,SetMusicOnHold(random) exten = 38166400,2,Dial(Zap/g4/9,600,t) exten = 38166400,3,VoiceMail,u500 exten = 38166400,4,Hangup ;Main Number 3282 2922 comes in on 38166483 exten = 38166483,1,SetMusicOnHold(random) exten = 38166483,2,Dial(Zap/g4/9,6000,t) exten = 38166483,3,VoiceMail,u500 exten = 38166483,4,Hangup ;Tempory Number for Darryl exten = 38166488,1,SetMusicOnHold(random) exten = 38166488,2,Dial(Zap/g4/483,6000,t) exten = 38166488,3,VoiceMail,u500 exten = 38166488,4,Hangup exten = 32822922,1,SetMusicOnHold(random) exten = 32822922,2,Dial(Zap/g4/9,600,t) exten = 32822922,3,VoiceMail,u500 exten = 32822922,4,Hangup ;exten = 38166444,1,SetVar(CALLFILENAME=/mnt/asterisk/38166444/${CALLERID}-${TIME STAMP}) ;exten = 38166444,2,Monitor(gsm,${CALLFILENAME},m) exten = 38166444,1,Dial(Zap/g4/9) ;exten = 38166483,1,SetVar(CALLFILENAME=/mnt/asterisk/38166483/${CALLERID}-${TIME STAMP}) ;exten = 38166483,2,Monitor(gsm,${CALLFILENAME},m) ;exten = 38166483,3,Dial(Zap/g4/483) exten = _381684XX,1,SetMusicOnHold(record) exten = _381684XX,2,Dial(Zap/g4/2${EXTEN:-2},600,t) exten = _381684XX,3,VoiceMail,u500 exten = _381684XX,4,Hangup exten