[Asterisk-Users] TE410P not working
I'm trying to install a TE410P this is what happens with compiled zaptel 1.0.9, 1.2-beta and 1.0.9 from http://updates.xorcom.com/iso/ this is my zaptel.conf (checked with the provider the values): span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=it defaultzone=it then I modprobe wct4xxp debug=1 t1e1override=15 and the kernel says : Sep 30 16:12:40 localhost kernel: Zapata Telephony Interface Registered on major 196 Sep 30 16:12:40 localhost kernel: Found TE4XXP at base address df5ffc00, remapped to f8aa2c00 Sep 30 16:12:40 localhost kernel: TE4XXP version c01a0164, burst ON, slip debug: OFF Sep 30 16:12:40 localhost kernel: FALC version: 0005, Board ID: 00 Sep 30 16:12:40 localhost kernel: Reg 0: 0x17f2f400 Sep 30 16:12:40 localhost kernel: Reg 1: 0x17f2f000 Sep 30 16:12:40 localhost kernel: Reg 2: 0x Sep 30 16:12:40 localhost kernel: Reg 3: 0x Sep 30 16:12:40 localhost kernel: Reg 4: 0x0001 Sep 30 16:12:40 localhost kernel: Reg 5: 0x Sep 30 16:12:40 localhost kernel: Reg 6: 0xc01a0164 Sep 30 16:12:40 localhost kernel: Reg 7: 0x1000 Sep 30 16:12:40 localhost kernel: Reg 8: 0x Sep 30 16:12:40 localhost kernel: Reg 9: 0x00ff Sep 30 16:12:40 localhost kernel: Reg 10: 0x Sep 30 16:12:40 localhost kernel: TE4XXP: Launching card: 0 Sep 30 16:12:40 localhost kernel: TE4XXP: Setting up global serial parameters Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 0 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 1 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 2 Sep 30 16:12:40 localhost kernel: Successfully initialized serial bus for unit 3 Sep 30 16:12:40 localhost kernel: Found a Wildcard: Wildcard TE410P (2nd Gen) so I do /sbin/ztcfg -vvv, which tells me : Zaptel Configuration == SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. while the kernel logs : Sep 30 16:21:07 localhost kernel: About to enter spanconfig! Sep 30 16:21:07 localhost kernel: TE4XXP: Configuring span 1 Sep 30 16:21:07 localhost kernel: Done with spanconfig! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 1 (TE4/0/1/1) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/1! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 2 (TE4/0/1/2) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/2! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 3 (TE4/0/1/3) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/3! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 4 (TE4/0/1/4) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/4! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 5 (TE4/0/1/5) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/5! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel 6 (TE4/0/1/6) sigtype 128 Sep 30 16:21:07 localhost kernel: Unassigning channel 0/6! Sep 30 16:21:07 localhost kernel: TE4XXP: Configured channel
Re: [Asterisk-Users] te410p not working after cvs-head update
Hmm, I did a cvs co -D 04/30/05 zaptel, and this version works fine - the TE410P comes up no problems. Seems to be the same issue as the #4155 bug. Julian. Asterisk wrote: Thanks Kevin, but I have done all you suggested. There is a closed bug on the bug tracking system (#4155) which seems to suggest a problem with 1st gen cards and the 2nd gen driver. Looks as if I need to speak to tech support (again - the te410P was a bugger to get going in a HP proliant DL-380, had to get another card sent) Julian. Kevin Bockman wrote: From: Asterisk I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 0005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: I don't have any experience with this, but from what I have read from here you need to upgrade zaptel along with asterisk. Did you do that? Also try clearing out your modules directory first. Update asterisk AND zaptel, then do an install. If that doesn't work, someone else will have to help. Kevin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] te410p not working after cvs-head update
I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 0005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: [EMAIL PROTECTED] zaptel]# /etc/init.d/zaptel start Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules:No functioning zap hardware found in /proc/zaptel, loading ztdummy Running ztcfg: ZT_CHANCONFIG failed on channel 1: No such device or address (6) [FAILED] I have removed the modules, make clean;make;make install and rebooted to no effect. What could be causing this ? The This driver does not support 1st gen modules worries me a little :) HELP!. Julian. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] te410p not working after cvs-head update
From: Asterisk I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 0005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: I don't have any experience with this, but from what I have read from here you need to upgrade zaptel along with asterisk. Did you do that? Also try clearing out your modules directory first. Update asterisk AND zaptel, then do an install. If that doesn't work, someone else will have to help. Kevin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] te410p not working after cvs-head update
When I posted, I meant to say that I updated to CVS-HEAD on all parts of * (asterisk, libpri,zaptel etc). Julian. Asterisk wrote: I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 0005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: [EMAIL PROTECTED] zaptel]# /etc/init.d/zaptel start Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules:No functioning zap hardware found in /proc/zaptel, loading ztdummy Running ztcfg: ZT_CHANCONFIG failed on channel 1: No such device or address (6) [FAILED] I have removed the modules, make clean;make;make install and rebooted to no effect. What could be causing this ? The This driver does not support 1st gen modules worries me a little :) HELP!. Julian. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] te410p not working after cvs-head update
Thanks Kevin, but I have done all you suggested. There is a closed bug on the bug tracking system (#4155) which seems to suggest a problem with 1st gen cards and the 2nd gen driver. Looks as if I need to speak to tech support (again - the te410P was a bugger to get going in a HP proliant DL-380, had to get another card sent) Julian. Kevin Bockman wrote: From: Asterisk I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at base address fdff, remapped to f8a34000 TE410P version c01a010b, burst ON, slip debug: OFF TE410P running with work queues. FALC version: 0005, Board ID: 00 .. (a series of Reg Values) .. This driver does not support 1st gen modules and at the tty used to start the zaptel service: I don't have any experience with this, but from what I have read from here you need to upgrade zaptel along with asterisk. Did you do that? Also try clearing out your modules directory first. Update asterisk AND zaptel, then do an install. If that doesn't work, someone else will have to help. Kevin ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
