Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
On Sat, Apr 14, 2012 at 7:55 PM, Joseph syscon...@gmail.com wrote: I forgot to add: clinic-amd*CLI iax2 show peers Name/Username Host Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored The two Asterisk boxes have to register to each other so home server and clinic have to be on the peers list on both sides (or at min on one side) and you must see the IP. Make sure you are resolving the names correctly and that Asterisk is set-up to resolv DNS names or use the IP instead. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
I think that part is working correctly I see boths asterisk are connected on home_server: syscon7*CLI iax2 show registry Host dnsmgr UsernamePerceived Refresh State 192.168.141.1:4569N home_serve 192.168.141.8:4569 60 Registered syscon7*CLI iax2 show peers Name/UsernameHost Mask Port Status clinic_server(null) (D) 255.255.255.255 0 Unmonitored on clinic_server: clinic-amd*CLI iax2 show peers Name/UsernameHost Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored -- Joseph On 04/15/12 09:38, Alejandro Imass wrote: On Sat, Apr 14, 2012 at 7:55 PM, Joseph syscon...@gmail.com wrote: I forgot to add: clinic-amd*CLI iax2 show peers Name/Username Host Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored The two Asterisk boxes have to register to each other so home server and clinic have to be on the peers list on both sides (or at min on one side) and you must see the IP. Make sure you are resolving the names correctly and that Asterisk is set-up to resolv DNS names or use the IP instead. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
They are connected but not registered. The iax2 show registry on home_server should show both peers. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Joseph Sent: Sunday, April 15, 2012 11:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown) I think that part is working correctly I see boths asterisk are connected on home_server: syscon7*CLI iax2 show registry Host dnsmgr UsernamePerceived Refresh State 192.168.141.1:4569N home_serve 192.168.141.8:4569 60 Registered syscon7*CLI iax2 show peers Name/UsernameHost Mask Port Status clinic_server(null) (D) 255.255.255.255 0 Unmonitored on clinic_server: clinic-amd*CLI iax2 show peers Name/UsernameHost Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored -- Joseph On 04/15/12 09:38, Alejandro Imass wrote: On Sat, Apr 14, 2012 at 7:55 PM, Joseph syscon...@gmail.com wrote: I forgot to add: clinic-amd*CLI iax2 show peers Name/Username Host Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored The two Asterisk boxes have to register to each other so home server and clinic have to be on the peers list on both sides (or at min on one side) and you must see the IP. Make sure you are resolving the names correctly and that Asterisk is set-up to resolv DNS names or use the IP instead. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
As long as Host does not contain the peer's IP address in iax2 show peers then it is not going to work and is not registered. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Joseph Sent: Sunday, April 15, 2012 12:40 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown) I think that part is working correctly I see boths asterisk are connected on home_server: syscon7*CLI iax2 show registry Host dnsmgr UsernamePerceived Refresh State 192.168.141.1:4569N home_serve 192.168.141.8:4569 60 Registered syscon7*CLI iax2 show peers Name/UsernameHost Mask Port Status clinic_server(null) (D) 255.255.255.255 0 Unmonitored on clinic_server: clinic-amd*CLI iax2 show peers Name/UsernameHost Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored -- Joseph On 04/15/12 09:38, Alejandro Imass wrote: On Sat, Apr 14, 2012 at 7:55 PM, Joseph syscon...@gmail.com wrote: I forgot to add: clinic-amd*CLI iax2 show peers Name/Username Host Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored The two Asterisk boxes have to register to each other so home server and clinic have to be on the peers list on both sides (or at min on one side) and you must see the IP. Make sure you are resolving the names correctly and that Asterisk is set-up to resolv DNS names or use the IP instead. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
One-way is ok as long as you don't have 2-way calling. To call A-B and B-A both must be registered. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Joseph Sent: Sunday, April 15, 2012 7:20 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown) In iax.conf on home_server I have: register = home_server:1234@192.168.141.1 On a clinic_server I DO NOT have any register entry. Do I have to register clinic_server to home_server? I was under impression one way regstration is enough. Home_server is aready registered to clinic_server. -- Joseph On 04/15/12 11:43, Danny Nicholas wrote: They are connected but not registered. The iax2 show registry on home_server should show both peers. -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Joseph Sent: Sunday, April 15, 2012 11:40 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown) I think that part is working correctly I see boths asterisk are connected on home_server: syscon7*CLI iax2 show registry Host dnsmgr UsernamePerceived Refresh State 192.168.141.1:4569N home_serve 192.168.141.8:4569 60 Registered syscon7*CLI iax2 show peers Name/UsernameHost Mask Port Status clinic_server(null) (D) 255.255.255.255 0 Unmonitored on clinic_server: clinic-amd*CLI iax2 show peers Name/UsernameHost Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored -- Joseph On 04/15/12 09:38, Alejandro Imass wrote: On Sat, Apr 14, 2012 at 7:55 PM, Joseph syscon...@gmail.com wrote: I forgot to add: clinic-amd*CLI iax2 show peers Name/Username Host Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored The two Asterisk boxes have to register to each other so home server and clinic have to be on the peers list on both sides (or at min on one side) and you must see the IP. Make sure you are resolving the names correctly and that Asterisk is set-up to resolv DNS names or use the IP instead. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Joseph -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
I have two asterisk servers connected via iax. home_server = IAX2 = clinic_server I'm just testing, calling from home_server via clinic_server but I'm getting an error message: Call gets through to clinic_server but will not call back. Dial(IAX2/home_server-957, IAX2/home_server/218,30,rw) in new stack [Apr 14 16:59:45] WARNING[27870]: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'IAX2' (cause 20 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) -- Executing [219@extensions:2] Hangup(IAX2/home_server-957, ) in new stack This is on clinic_server: exten = 218,1,Dial(IAX2/home_server/${EXTEN},30,rw) exten = 218,n,Hangup exten = 219,1,Dial(IAX2/home_server/218,30,rw) exten = 219,n,Hangup When somebody in a clinic server dials: 218 my phone in home_server is ringing OK But when I call extension 219 from home server it should dial my 'home_server' 218 and it does but it gives me an error message: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'IAX2' (cause 20 - Unknown) -- Joseph -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Unable to create channel of type 'IAX2' (cause 20 - Unknown)
I forgot to add: clinic-amd*CLI iax2 show peers Name/UsernameHost Mask Port Status home_server (null) (D) 255.255.255.255 0 Unmonitored iaxy-322/iaxy-3 (null) (D) 255.255.255.255 0 Unmonitored -- Joseph On 04/14/12 17:09, Joseph wrote: I have two asterisk servers connected via iax. home_server = IAX2 = clinic_server I'm just testing, calling from home_server via clinic_server but I'm getting an error message: Call gets through to clinic_server but will not call back. Dial(IAX2/home_server-957, IAX2/home_server/218,30,rw) in new stack [Apr 14 16:59:45] WARNING[27870]: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'IAX2' (cause 20 - Unknown) == Everyone is busy/congested at this time (1:0/0/1) -- Executing [219@extensions:2] Hangup(IAX2/home_server-957, ) in new stack This is on clinic_server: exten = 218,1,Dial(IAX2/home_server/${EXTEN},30,rw) exten = 218,n,Hangup exten = 219,1,Dial(IAX2/home_server/218,30,rw) exten = 219,n,Hangup When somebody in a clinic server dials: 218 my phone in home_server is ringing OK But when I call extension 219 from home server it should dial my 'home_server' 218 and it does but it gives me an error message: app_dial.c:2218 dial_exec_full: Unable to create channel of type 'IAX2' (cause 20 - Unknown) -- Joseph -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Unable to create channel of type 'IAX2' (cause 3)
What does it mean? How to solve it? -- Executing Dial(Local/[EMAIL PROTECTED],2, IAX2/[EMAIL PROTECTED]/011886229xx) in new stack May 20 18:02:17 NOTICE[31410]: app_dial.c:973 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) == Everyone is busy/congested at this time (1:0/1/0) bye Ronald ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Unable to create channel of type 'IAX2' (cause 3)
I try to connect to voipjet, but I get always busy, ... it worked yesterday, ... no changes on my side -- Executing SetGroup(SIP/615-829b, iax-voipjet) in new stack -- Executing Dial(SIP/615-829b, IAX2/[EMAIL PROTECTED]/011886228357765) in new stack May 20 18:16:26 NOTICE[9733]: app_dial.c:973 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) == Everyone is busy/congested at this time (1:0/1/0) -- Executing Hangup(SIP/615-829b, ) in new stack == Spawn extension (default, 9011886228357765, 514) exited non-zero on 'SIP/615-829b' -- Executing Hangup(SIP/615-829b, ) in new stack == Spawn extension (default, h, 1) exited non-zero on 'SIP/615-829b' This is the extension.conf for this part: exten = _9011Z.,413,Dial,IAX2/[EMAIL PROTECTED]/${EXTEN:${TRUNKMSD}} ; VoipJet.com NANPA exten = _9011Z.,414,hangup exten = _9011Z.,512,Dial,IAX2/[EMAIL PROTECTED]/${EXTEN:${TRUNKMSD}} Should I remove the hangup line, so that it can go and try NuFone? How can I improve this? bye Ronald ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'IAX2'
Where is the mistake? Right here [local] exten = _XX,1,Dial(IAX2/${EXTEN}) You are telling it to dial ALL 10 digit numbers using IAX. What you need to do is have an extension that determines if a call is meany for the X100P and if so the dial would be exten = _XX,1,Dial(ZAP/1/${EXTEN}) ZAP/1 is your X100p FXO. Take a good look at http://www.asteriskdocs.org which was entirely written to help you understand channels, extensions and dialplans. These are the essential building blocks to get you going. You will need further knowledge to separate internal extensions from external phone numbers. Often internal extensions are numbered like 2000,2001,2002... example exten = _2XXX,1,Dial(IAX2/${EXTEN}) ; hand all 4 digit numbers that begin with 2 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'IAX2'
Really, really, really THANKS - Original Message - From: Wilson Pickett [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Sunday, March 13, 2005 11:11 AM Subject: Re: [Asterisk-Users] Unable to create channel of type 'IAX2' Where is the mistake? Right here [local] exten = _XX,1,Dial(IAX2/${EXTEN}) You are telling it to dial ALL 10 digit numbers using IAX. What you need to do is have an extension that determines if a call is meany for the X100P and if so the dial would be exten = _XX,1,Dial(ZAP/1/${EXTEN}) ZAP/1 is your X100p FXO. Take a good look at http://www.asteriskdocs.org which was entirely written to help you understand channels, extensions and dialplans. These are the essential building blocks to get you going. You will need further knowledge to separate internal extensions from external phone numbers. Often internal extensions are numbered like 2000,2001,2002... example exten = _2XXX,1,Dial(IAX2/${EXTEN}) ; hand all 4 digit numbers that begin with 2 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Unable to create channel of type 'IAX2'
Hi all, I'm a newbie and I have a configuration problem with Asterisk. Seems that I'm not able to call an outbound number. I'm quite sure that it is a configuration problem, but I'm not able to find out where is the mistake, even reading several docs to www.voip-info.org. I do not have a good knowledge of Asterisk, I'm not very familiar with its configuration and I've a big confusion about it. Any help will be appreciated. When I try to call outside I got the following message: *CLI -- Accepting AUTHENTICATED call from 192.168.0.55: requested format = ilbc, requested prefs = (), actual format = gsm, host prefs = (gsm|ilbc|speex), priority = mine -- Executing Dial(IAX2/[EMAIL PROTECTED]/2, IAX2/3479450772) in new stack Mar 12 16:15:36 WARNING[3149]: chan_iax2.c:2341 create_addr: No such host: 3479450800 Mar 12 16:15:36 NOTICE[3149]: app_dial.c:911 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) == Everyone is busy/congested at this time (1:0/1/0) Mar 12 16:15:47 WARNING[3149]: pbx.c:2028 ast_pbx_run: Timeout, but no rule 't' in context 'fullaccess' -- Hungup 'IAX2/[EMAIL PROTECTED]/2' My zapata.conf is: [channels] language=it context=fullaccess signalling=fxs_ks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 pickupgroup=1 immediate=yes musiconhold=default channel = 1 channel=1 My iax.conf is: [general] bindaddr=0.0.0.0 context=noaccess group=1 callgroup=1 pickupgroup=1 amaflags=default bandwidth=low disallow=all ; same as bandwidth=high disallow=ulaw disallow=alaw allow=gsm allow=iLBC allow=Speex jitterbuffer=yes dropcount=2 maxjitterbuffer=500 maxexccessbuffer=400 tos=throughput [guest] type=user context=iaxguest callerid=Guest IAX User [emi] type=friend username=emi secret=none auth=md5 host=dynamic context=fullaccess mailbox=101 callerid=Emi102 iax.conf 44L, 621C and my extension.conf is: [general] static=yes writeprotect=yes [fullaccess] include = parkedcalls include = local [local] exten = _XX,1,Dial(IAX2/${EXTEN}) Where is the mistake? Regards, ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'IAX2'
On Sat, Mar 12, 2005 at 04:04:29PM +0100, Androtech wrote: Hi all, I'm a newbie and I have a configuration problem with Asterisk. Seems that I'm not able to call an outbound number. I'm quite sure that it is a configuration problem, but I'm not able to find out where is the mistake, even reading several docs to www.voip-info.org. You didn't read all the messages, see: -- Executing Dial(IAX2/[EMAIL PROTECTED]/2, IAX2/3479450772) in new stack Mar 12 16:15:36 WARNING[3149]: chan_iax2.c:2341 create_addr: No such host: 3479450800 Mar 12 16:15:36 NOTICE[3149]: app_dial.c:911 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) chan_iax2 says you have no section in your iax.conf telling it what 3479450772 is, *therefore* it couldn't create the channel. Always read *all* the messages, especially the first few since they may indicate something that may cause a failure later. FWIW, you probably wanted IAX2/target/3479450772. Hope this helps, -- Martijn van Oosterhout Ecomtel Pty Ltd ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type 'IAX2'
I do not undertand how to tell to Asterisk to use the X100P to dial an external number instead the internal one. It always calls the internal extension. Could someone give me a valid iax.conf and extension.conf examples files. Regards, chan_iax2 says you have no section in your iax.conf telling it what 3479450772 is, *therefore* it couldn't create the channel. Always read *all* the messages, especially the first few since they may indicate something that may cause a failure later. FWIW, you probably wanted IAX2/target/3479450772. Hope this helps, -- Martijn van Oosterhout Ecomtel Pty Ltd ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Unable to create channel of type IAX2
And when it does work, the console says: Mar 5 02:07:08 NOTICE[9962]: chan_iax2.c:7065 iax2_poke_noanswer: Peer 'akralliax' is now UNREACHABLE! Time: 5 Mar 5 02:07:18 NOTICE[9962]: chan_iax2.c:6420 socket_read: Peer 'akralliax' is now REACHABLE! Time: 3 The iaxcomm phone is on the same LAN, so why can it be coming and going? Any ideas? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anton Krall Sent: Sábado, 05 de Marzo de 2005 01:55 a.m. To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Unable to create channel of type IAX2 Guys.. Im trying to setup a fotphone using iaxcomm and when I dial that softphones extension, * complains of this: Mar 5 01:54:54 NOTICE[9962]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) Any hints? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Unable to create channel of type IAX2
I don't know if this is still true, but Iax clients had problems when you check them with qualify (set latter to no)... HTH, Rob. - Original Message - From: Anton Krall [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com Sent: Saturday, March 05, 2005 9:05 AM Subject: RE: [Asterisk-Users] Unable to create channel of type IAX2 And when it does work, the console says: Mar 5 02:07:08 NOTICE[9962]: chan_iax2.c:7065 iax2_poke_noanswer: Peer 'akralliax' is now UNREACHABLE! Time: 5 Mar 5 02:07:18 NOTICE[9962]: chan_iax2.c:6420 socket_read: Peer 'akralliax' is now REACHABLE! Time: 3 The iaxcomm phone is on the same LAN, so why can it be coming and going? Any ideas? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anton Krall Sent: Sábado, 05 de Marzo de 2005 01:55 a.m. To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Unable to create channel of type IAX2 Guys.. Im trying to setup a fotphone using iaxcomm and when I dial that softphones extension, * complains of this: Mar 5 01:54:54 NOTICE[9962]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) Any hints? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Unable to create channel of type IAX2
Seems sometimes.. Specially with certain iax softphones like iaxcomm... Seems firefly doesnt have any problems. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Rozman Sent: Sábado, 05 de Marzo de 2005 03:56 p.m. To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Unable to create channel of type IAX2 I don't know if this is still true, but Iax clients had problems when you check them with qualify (set latter to no)... HTH, Rob. - Original Message - From: Anton Krall [EMAIL PROTECTED] To: 'Asterisk Users Mailing List - Non-Commercial Discussion' asterisk-users@lists.digium.com Sent: Saturday, March 05, 2005 9:05 AM Subject: RE: [Asterisk-Users] Unable to create channel of type IAX2 And when it does work, the console says: Mar 5 02:07:08 NOTICE[9962]: chan_iax2.c:7065 iax2_poke_noanswer: Peer 'akralliax' is now UNREACHABLE! Time: 5 Mar 5 02:07:18 NOTICE[9962]: chan_iax2.c:6420 socket_read: Peer 'akralliax' is now REACHABLE! Time: 3 The iaxcomm phone is on the same LAN, so why can it be coming and going? Any ideas? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Anton Krall Sent: Sábado, 05 de Marzo de 2005 01:55 a.m. To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [Asterisk-Users] Unable to create channel of type IAX2 Guys.. Im trying to setup a fotphone using iaxcomm and when I dial that softphones extension, * complains of this: Mar 5 01:54:54 NOTICE[9962]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) Any hints? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Unable to create channel of type IAX2
Guys.. Im trying to setup a fotphone using iaxcomm and when I dial that softphones extension, * complains of this: Mar 5 01:54:54 NOTICE[9962]: app_dial.c:936 dial_exec_full: Unable to create channel of type 'IAX2' (cause 3) Any hints? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users