It liiks like a motherboard problem. It's failing the initial boot.
You say it booted again after two hours. Was the machine powered down
during that interval. If so, I suspect you have a temperature problem.
I've seen very similar problems from a defective CPU fan.
Bill
On 5/30/05, Ronald Wiplinger [EMAIL PROTECTED] wrote:
Yesterday my * server (SuSE 9.2 pro on Athlon) just stopped, no screen,
no reaction to keyboard or mouse.
I get all kind of messages, or just stop during restart
1. just two lines of a code (immediately after turn on the computer)
113-AM21200-100-GB
GV-RX30128D F1
2. Main Processor: AMD Athlon (tm) 64 Processor 3200+
CPUID: 0FF0 Patch ID: 0041
and BIOS line
12/14/2004-NF-CK804-6A6IFG09C-00
and it stops here
3. No SATRaid found and it stops here
4. ... No disk reserved for RAID use, RAID disable
(actually it meant computer disabled, and it stops here)
5. if I come to boot Linux, than it stops somewhere, with or without
kernel panic.
The most I came was:
Excessive leakage detected on module 0:0 volts (00) after 162 ms
ProSLIC module failed leakage test. Check for short circuit
DC-DC cal has a surprising direct 107 of 0xff!
# Loop error (ff) #
# Loop error (ff) #
# Loop error (ff) #
# Loop error (ff) #
# Loop error (ff) #
# Loop error (ff) #
# Loop error (ff) #
!!! DTMF_ROW_0_PEAK iREG 0 = should be 55C2
# Loop error (ff) #
# Loop error (ff) #
!!! DTMF_ROW_1_PEAK iREG 1 = should be 51E6
# Loop error (ff) #
# Loop error (ff) #
!!! DTMF_ROW_2_PEAK iREG 2 = should be 4B85
# Loop error (ff) #
# Loop error (ff) #
!!! DTMF_ROW_3_PEAK iREG 3 = should be 4937
# Loop error (ff) #
# Loop error (ff) #
!!! DTMF_ROW_1_PEAK iREG 4 = should be
CPU 0: Machine Check Exception: 4 Bank 4: b20070f0f
TSC 1cd4adfa6b
Kernel panic - not syncing: Machine check
Above error I googled as a problem in the Digium card. Chicken or egg?
Digium card or a result of another problem? Since I most of the time did
not come so far.
Any idea?
I can immagine from all the errors I saw:
1. Motherboard is broken
2. CPU is broken
3. Power supply is broken (btw a very expensive one: 200 US$)
What is your expert opinion??? Where and how to start to get back the
system stabled. Yes, after 2 hours it booted again, but I worry, that it
will happen anytime again.
bye
Ronald
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
