Re: [Asterisk-Users] isdn-data over iax
TDMoE doesn't seem to be a good alternative. it doesn't make sense to use an eth-interface used for intranet-traffic/sip/sccp as well ...to heavy load to get a reliable function. On my test-asterisk with just activated ztd_eth-module and configured zaptel it filled up my log with error-messages (with kernel 2.6.13 asterisk1.2.9.1 zaptel/bri 1.2.6)...until disk-full ...TDMoE is automatically using T1 instead of the european E1 when using pri as signalling [EMAIL PROTECTED] schrieb am 29.06.2006 08:58:23: Hi, [EMAIL PROTECTED] wrote: is the following zaptel.conf configuration correct for TDMoE used for pri-cpe signalling - is this possible at all ? I couldn't find an example... Any kind of Zaptel signalling should be fine. Check out http://www.voip-info.org/wiki/index.php?page=Asterisk+TDMoE Best regards, Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] isdn-data over iax
Hi, [EMAIL PROTECTED] wrote: is the following zaptel.conf configuration correct for TDMoE used for pri-cpe signalling - is this possible at all ? I couldn't find an example... Any kind of Zaptel signalling should be fine. Check out http://www.voip-info.org/wiki/index.php?page=Asterisk+TDMoE Best regards, Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] isdn-data over iax
is the following zaptel.conf configuration correct for TDMoE used for pri-cpe signalling - is this possible at all ? I couldn't find an example... loadzone=nl defaultzone=nl # pri E1 card span=1,1,3,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 # hfc-pci 1 span=2,1,3,ccs,ami bchan=32-33 dchan=34 # hfc-pci 2 span=3,1,3,ccs,ami bchan=35-36 dchan=37 #TDMoE dynamic=eth,eth0/00:D0:09:E8:FA:EB,31,0 bchan=38-52 dchan=53 bchan=54-68 [EMAIL PROTECTED] schrieb am 27.06.2006 17:01:26: [EMAIL PROTECTED] wrote: is it possible to route an ISDN-Data channel over an iax-connection ? the setup is pc with isdn-card - (zaphfc) Asterisk Server1 (iax) - (iax) Asterisk Server2 (E1)-connecting to an external isdn-dialin router via the iax-line the call is transfered as speech which is not accepted at the remote end IAX is not suited for this. Maybe TDMoE is an option for you ? Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] isdn-data over iax
is it possible to route an ISDN-Data channel over an iax-connection ? the setup is pc with isdn-card - (zaphfc) Asterisk Server1 (iax) - (iax) Asterisk Server2 (E1)-connecting to an external isdn-dialin router via the iax-line the call is transfered as speech which is not accepted at the remote end ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] isdn-data over iax
[EMAIL PROTECTED] wrote: is it possible to route an ISDN-Data channel over an iax-connection ? the setup is pc with isdn-card - (zaphfc) Asterisk Server1 (iax) - (iax) Asterisk Server2 (E1)-connecting to an external isdn-dialin router via the iax-line the call is transfered as speech which is not accepted at the remote end IAX is not suited for this. Maybe TDMoE is an option for you ? Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
