Hello Victor:
Are you using the QuadBRI from Junghanns?
If so, this is a configuration that works for me in the UK, one single
E1 board and the QuadBRI. As I recall, the order of loading is
important (see way below):
ZAPTEL.CONF
loadzone=nl
defaultzone=nl
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
# E1 definition:
span=5,0,0,ccs,hdb3,crc4
#BRI's:
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
#E1:
bchan=13-27,29-43
dchan=28
-
ZAPATA.CONF
[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp
; define 4 BRI's:
pridialplan = unknown
prilocaldialplan = unknown
echocancel = yes
context=incoming
group = 1
channel => 1-2
group = 2
channel => 4-5
group = 3
channel => 7-8
group = 4
channel => 10-11
group = 9
;and the E1
pridialplan = unknown
signalling=pri_net <- this is because I'm connecting to a
Dialogic board
in another system, not the PSTN.. Would
normally be pri_cpe
channel => 13-27,29-43
-
IN YOUR SYSTEM REBOOT ROUTINE:
#following for Quad BRI system:
cd /usr/src/bri/bri-stuff.0.1.0-RC2g/qozap
modprobe -v zaptel >>/var/log/asterisk/modprobe.log
sleep 1
insmod -v qozap.o >>/var/log/asterisk/modprobe.log
sleep 1
# following for single E1 system
modprobe -v wct1xxp >>/var/log/asterisk/modprobe.log
sleep 4
#ztcfg -vv >>/var/log/asterisk/modprobe.log <- NOTE THAT ztcfg
commented out, Junghanns issue
#sleep 3
startast
sleep 3
GOOD LUCK
Scott Stingel
www.evtmedia.com
-
Victor Alvarez wrote:
Hello,
I have a machine with two cards installed, one digium that gives e1
connectivity and one quadBri for the ISDN line.
I can use them independently. I have one zaptel.conf and one
zapata.conf for each card. I would like to work with them at the same
time and I am not sure about how could I do it (if it is possible!).
My first attempt wasn't very successful. I made the config
files getting the info from the one for isdn and the one for e1. Ztcfg
configures the 136 channels without problems but I can't use the e1
channel. A curious thing is that, with the same configuration, I can
use the e1 channel.
Any help/suggestion is more than welcome.
Thanks.
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
