Re: [asterisk-users] Asterisk Realtime Unregister
Nhadie wrote:
I disabled logging of NOTIFY on the CLI and it does not show anymore,
however CPU is still very high, latency as well goes up when it is
trying to poke my phone here, my phone(SPA942) also keeps on rebooting
is there a way to increase the time of sending the qualify? TIA
you can try to use 'qualifyfreq' parametr in sip.conf (if you are using
1.6 or trunk)
regards
nhadie
Nhadie wrote:
Thank you for your reply sir. I tried setting qualify=yes my CPU spiked
to 113%
i continuously see this on my CLI
Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '110100' is now Lagged. (2354ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (432ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (436ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (440ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (444ms / 2000ms)
could that be the cause of high cpu? i'm logged in on the cli asterisk
-vr, my verbosity is only set to 1. how come i keep on seeing the NOTICE?
thanks again in advanced
regards,
nhadie
Rob Hillis wrote:
If a phone is unplugged, it's not likely to have time to send
notification of this to Asterisk before it powers off. There's nothing
you can add to your dialplan to overcome this, however you *can* set the
qualify parameter within sip.conf (or it's equivalent realtime table)
to overcome this.
See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more
information. Short version is that configuring a qualify interval is
the equivalent of setting up a heartbeat between Asterisk and registered
devices configured with a qualify interval. If the heartbeat fails, the
phone's registration is suspended.
Nhadie wrote:
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still registered,
when i call using x-lite, asterisk tries to call it.so it gets stuck at
[Aug 11 21:37:31] -- Called 102104
until it reached the timed out i set in the dialplan which is 30 secs
Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
is there something i can add on my dialplan to first detect that the
user is not available, or maybe force unregister, anything that would
not make my dialplan to wait for 30 secs.
also i'm not using rtcachefriends, how would i know in the CLI which
user is registered? i tried sip prune but it shows me nothing
sip prune realtime peer all
No peers found to prune.
anyone experienced this?
thank you
regards.
nhadie
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:48a0464541521298081403!
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk Realtime Unregister
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still registered,
when i call using x-lite, asterisk tries to call it.so it gets stuck at
[Aug 11 21:37:31] -- Called 102104
until it reached the timed out i set in the dialplan which is 30 secs
Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
is there something i can add on my dialplan to first detect that the
user is not available, or maybe force unregister, anything that would
not make my dialplan to wait for 30 secs.
also i'm not using rtcachefriends, how would i know in the CLI which
user is registered? i tried sip prune but it shows me nothing
sip prune realtime peer all
No peers found to prune.
anyone experienced this?
thank you
regards.
nhadie
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk Realtime Unregister
If a phone is unplugged, it's not likely to have time to send
notification of this to Asterisk before it powers off. There's nothing
you can add to your dialplan to overcome this, however you *can* set the
qualify parameter within sip.conf (or it's equivalent realtime table)
to overcome this.
See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more
information. Short version is that configuring a qualify interval is
the equivalent of setting up a heartbeat between Asterisk and registered
devices configured with a qualify interval. If the heartbeat fails, the
phone's registration is suspended.
Nhadie wrote:
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still registered,
when i call using x-lite, asterisk tries to call it.so it gets stuck at
[Aug 11 21:37:31] -- Called 102104
until it reached the timed out i set in the dialplan which is 30 secs
Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
is there something i can add on my dialplan to first detect that the
user is not available, or maybe force unregister, anything that would
not make my dialplan to wait for 30 secs.
also i'm not using rtcachefriends, how would i know in the CLI which
user is registered? i tried sip prune but it shows me nothing
sip prune realtime peer all
No peers found to prune.
anyone experienced this?
thank you
regards.
nhadie
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:48a0464541521298081403!
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk Realtime Unregister
Thank you for your reply sir. I tried setting qualify=yes my CPU spiked
to 113%
i continuously see this on my CLI
Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '110100' is now Lagged. (2354ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (432ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (436ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (440ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (444ms / 2000ms)
could that be the cause of high cpu? i'm logged in on the cli asterisk
-vr, my verbosity is only set to 1. how come i keep on seeing the NOTICE?
thanks again in advanced
regards,
nhadie
Rob Hillis wrote:
If a phone is unplugged, it's not likely to have time to send
notification of this to Asterisk before it powers off. There's nothing
you can add to your dialplan to overcome this, however you *can* set the
qualify parameter within sip.conf (or it's equivalent realtime table)
to overcome this.
See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more
information. Short version is that configuring a qualify interval is
the equivalent of setting up a heartbeat between Asterisk and registered
devices configured with a qualify interval. If the heartbeat fails, the
phone's registration is suspended.
Nhadie wrote:
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still registered,
when i call using x-lite, asterisk tries to call it.so it gets stuck at
[Aug 11 21:37:31] -- Called 102104
until it reached the timed out i set in the dialplan which is 30 secs
Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
is there something i can add on my dialplan to first detect that the
user is not available, or maybe force unregister, anything that would
not make my dialplan to wait for 30 secs.
also i'm not using rtcachefriends, how would i know in the CLI which
user is registered? i tried sip prune but it shows me nothing
sip prune realtime peer all
No peers found to prune.
anyone experienced this?
thank you
regards.
nhadie
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:48a0464541521298081403!
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk Realtime Unregister
I disabled logging of NOTIFY on the CLI and it does not show anymore,
however CPU is still very high, latency as well goes up when it is
trying to poke my phone here, my phone(SPA942) also keeps on rebooting
is there a way to increase the time of sending the qualify? TIA
regards
nhadie
Nhadie wrote:
Thank you for your reply sir. I tried setting qualify=yes my CPU spiked
to 113%
i continuously see this on my CLI
Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (388ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '110100' is now Lagged. (2354ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (432ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118777' is now Reachable. (436ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (440ms / 2000ms)
[Aug 11 23:31:56] NOTICE[15207]: chan_sip.c:12669
handle_response_peerpoke: Peer '118555' is now Reachable. (444ms / 2000ms)
could that be the cause of high cpu? i'm logged in on the cli asterisk
-vr, my verbosity is only set to 1. how come i keep on seeing the NOTICE?
thanks again in advanced
regards,
nhadie
Rob Hillis wrote:
If a phone is unplugged, it's not likely to have time to send
notification of this to Asterisk before it powers off. There's nothing
you can add to your dialplan to overcome this, however you *can* set the
qualify parameter within sip.conf (or it's equivalent realtime table)
to overcome this.
See http://www.voip-info.org/wiki/view/Asterisk+sip+qualify for more
information. Short version is that configuring a qualify interval is
the equivalent of setting up a heartbeat between Asterisk and registered
devices configured with a qualify interval. If the heartbeat fails, the
phone's registration is suspended.
Nhadie wrote:
Hi,
I'm running asterisk realtime, i had prob when a user does not
unregister properly.
I tested with SPA942 and a PAP2, when phone is registered, i call using
the SPA using x-lite no problem, but when i unplugged the power, it does
not unregister properly, so asterisk think SPA942 is still registered,
when i call using x-lite, asterisk tries to call it.so it gets stuck at
[Aug 11 21:37:31] -- Called 102104
until it reached the timed out i set in the dialplan which is 30 secs
Dial(SIP/${EXTEN}|30|t|M(setmusiconhold,moh-${EXTEN}))
is there something i can add on my dialplan to first detect that the
user is not available, or maybe force unregister, anything that would
not make my dialplan to wait for 30 secs.
also i'm not using rtcachefriends, how would i know in the CLI which
user is registered? i tried sip prune but it shows me nothing
sip prune realtime peer all
No peers found to prune.
anyone experienced this?
thank you
regards.
nhadie
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
!DSPAM:48a0464541521298081403!
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
