Do a 'make menuselect' when you install zaptel driver and make sure in
the 'Binary Firmware Package' either ' FIRMWARE-OCT6114-064' or '
FIRMWARE-OCT6114-128' is selected depending on which echo cancellation
module you have. If you are unsure select both.
Remi
Klaverstyn, David C wrote:
Hi All,
When using a Digium card with a hardware echo cancellation module
installed, is the only thing required to enable it, is to set
echocancel=yes in zapata.conf?
I think I remember seeing somewhere that you need to make a change in
the zaptel Makefile to allow the echo cancellation to work. Is that
correct and if so what is it?
Regards
David.
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
