Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2
Vladimir, Sorry, I was a little “unclear”, Asterisk SVN-trunk-r280589M was not a 1.8 release. It was compiled before 1.8 was released. May did a lot of patches that he comitted to the trunk version and then when I got everything to work, I didnt recompile until I tried 1.8.2. But I will dig into the logs and se if i can find anything. Magnus, I finally got to testing the patch myself. Apparently it did not work for me. That means that if you are affected by the same issue it is not fixed yet. The current manifestation an incoming OOH_323 call fails in 30 seconds. After reading your initial message more carefully I realized the problem you experience must be different as the ooh_323 issue affects all releases in 1.8 branch and you state that it worked for you when you built from the svn trunk. I would suggest you analyze the full log and make sure the fax application does not complain of any problems, then check the h323_log and make sure there are no complaints of codecs incompatibility. If you are not utilizing T.38 then only alaw and ulaw will support fax. -Vladimir On 1/14/2011 12:32 AM, magnu...@inputinterior.se wrote: Did apply the patch and did a recompile, no difference, fax still not working. But I did notice one thing, when I was standing at a fax attched to PSTN and trying to send a fax to a fax attached to the Asterisk: The PSTN fax never switched to saying “Sending...” in the display just “Dialing”, but I can “hear” the Asterisk fax i answering. When I went back to Trunk version and did the same, I saw the fax display going from “Dialing” to “Sending” to “Sending OK”. I am sorry to say that I am not smart enough to know what trace I should start looking at, any knows? From: Vladimir Mikhelson Sent: Thursday, January 13, 2011 5:04 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: magnu...@inputinterior.se Subject: Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2 Magnus, Can it be the same as I experienced https://issues.asterisk.org/view.php?id=18542 ? Do not be confused by the ticket subject, it reflects the symptoms as they looked originally You can try the patch if applicable and if you know how to compile Addons in 1.8 separately or if you have a capacity to compile the whole thing. -Vladimir On 1/13/2011 6:31 AM, magnu...@inputinterior.se wrote: Gentlemen, We have a setup as below: PSTN – E1 – Avaya – OOH323 trunk – Asterisk – SPA-2102 – Fax machine Running Asterisk SVN-trunk-r280589M, fax working as a clock. I decided to leave “trunk” and go a stable version so I upgraded to 1.8.2. Didn’t change any config files, everything worked as before except fax. I wonder if there are any known issues or things that I have missed to do in some config file. Did a downgrade to SVN-trunk-r280589M and fax started to work again. /Magnus -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-usersimage/png-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2
Magnus,
I finally got to testing the patch myself. Apparently it did not
work for me. That means that if you are affected by the same issue
it is not fixed yet. The current manifestation an incoming OOH_323
call fails in 30 seconds.
After reading your initial message more carefully I realized the
problem you experience must be different as the ooh_323 issue
affects all releases in 1.8 branch and you state that it worked for
you when you built from the svn trunk.
I would suggest you analyze the "full" log and make sure the fax
application does not complain of any problems, then check the
"h323_log" and make sure there are no complaints of codecs
incompatibility. If you are not utilizing T.38 then only alaw and
ulaw will support fax.
-Vladimir
On 1/14/2011 12:32 AM, magnu...@inputinterior.se wrote:
Did apply the patch and did a recompile, no difference,
fax still not working.
But I did notice one thing, when I was standing at a fax
attched to PSTN and trying to send a fax to a fax attached
to the Asterisk:
The PSTN fax never switched to saying “Sending...” in the
display just “Dialing”, but I can “hear” the Asterisk fax i
answering.
When I went back to Trunk version and did the same, I saw
the fax display going from “Dialing” to “Sending” to
“Sending OK”.
I am sorry to say that I am not smart enough to know what
trace I should start looking at, any knows?
From: Vladimir Mikhelson
Sent: Thursday, January 13, 2011 5:04 PM
To: Asterisk
Users Mailing List - Non-Commercial Discussion
Cc: magnu...@inputinterior.se
Subject: Re: [asterisk-users] Fax stopped
working when upgrading to 1.8.2
Magnus,
Can it be the same as I experienced https://issues.asterisk.org/view.php?id=18542
? Do not be confused by the ticket subject, it reflects the
symptoms as they looked originally
You can try the patch if applicable and if you know how to
compile Addons in 1.8 separately or if you have a capacity
to compile the whole thing.
-Vladimir
On 1/13/2011 6:31 AM, magnu...@inputinterior.se
wrote:
Gentlemen,
We have a setup as below:
PSTN – E1 – Avaya – OOH323 trunk – Asterisk –
SPA-2102 – Fax machine
Running Asterisk SVN-trunk-r280589M, fax working
as a clock.
I decided to leave “trunk” and go a stable
version so I upgraded to 1.8.2.
Didn’t change any config files, everything worked
as before except fax.
I wonder if there are any known issues or things
that I have missed to do in some config file.
Did a downgrade to SVN-trunk-r280589M and fax
started to work again.
/Magnus
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Fax stopped working when upgrading to 1.8.2
Gentlemen, We have a setup as below: PSTN – E1 – Avaya – OOH323 trunk – Asterisk – SPA-2102 – Fax machine Running Asterisk SVN-trunk-r280589M, fax working as a clock. I decided to leave “trunk” and go a stable version so I upgraded to 1.8.2. Didn’t change any config files, everything worked as before except fax. I wonder if there are any known issues or things that I have missed to do in some config file. Did a downgrade to SVN-trunk-r280589M and fax started to work again. /Magnus-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2
Magnus, Can it be the same as I experienced https://issues.asterisk.org/view.php?id=18542 ? Do not be confused by the ticket subject, it reflects the symptoms as they looked originally You can try the patch if applicable and if you know how to compile Addons in 1.8 separately or if you have a capacity to compile the whole thing. -Vladimir On 1/13/2011 6:31 AM, magnu...@inputinterior.se wrote: Gentlemen, We have a setup as below: PSTN – E1 – Avaya – OOH323 trunk – Asterisk – SPA-2102 – Fax machine Running Asterisk SVN-trunk-r280589M, fax working as a clock. I decided to leave “trunk” and go a stable version so I upgraded to 1.8.2. Didn’t change any config files, everything worked as before except fax. I wonder if there are any known issues or things that I have missed to do in some config file. Did a downgrade to SVN-trunk-r280589M and fax started to work again. /Magnus -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2
Did apply the patch and did a recompile, no difference, fax still not working. But I did notice one thing, when I was standing at a fax attched to PSTN and trying to send a fax to a fax attached to the Asterisk: The PSTN fax never switched to saying “Sending...” in the display just “Dialing”, but I can “hear” the Asterisk fax i answering. When I went back to Trunk version and did the same, I saw the fax display going from “Dialing” to “Sending” to “Sending OK”. I am sorry to say that I am not smart enough to know what trace I should start looking at, any knows? From: Vladimir Mikhelson Sent: Thursday, January 13, 2011 5:04 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: magnu...@inputinterior.se Subject: Re: [asterisk-users] Fax stopped working when upgrading to 1.8.2 Magnus, Can it be the same as I experienced https://issues.asterisk.org/view.php?id=18542 ? Do not be confused by the ticket subject, it reflects the symptoms as they looked originally You can try the patch if applicable and if you know how to compile Addons in 1.8 separately or if you have a capacity to compile the whole thing. -Vladimir On 1/13/2011 6:31 AM, magnu...@inputinterior.se wrote: Gentlemen, We have a setup as below: PSTN – E1 – Avaya – OOH323 trunk – Asterisk – SPA-2102 – Fax machine Running Asterisk SVN-trunk-r280589M, fax working as a clock. I decided to leave “trunk” and go a stable version so I upgraded to 1.8.2. Didn’t change any config files, everything worked as before except fax. I wonder if there are any known issues or things that I have missed to do in some config file. Did a downgrade to SVN-trunk-r280589M and fax started to work again. /Magnus -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-userswlEmoticon-sadsmile[1].png-- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
