[asterisk-users] Freeswitch with Digium T316 timed out, T316 timed out
Hi I am trying to deploy freeswitch with Digium TE121 card for my office setup, but it is continuously showing Signaling is up and channels are down except D channel. Our Architecture is like We have freeswitch installed with libpri1.4 and Dahdi. I am from India and here we are having E1 trunk. Dahdi Configuration is cat system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7 19:39:07 2013 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCT1/0 Wildcard TE121 Card 0 (MASTER) span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Global data loadzone= uk defaultzone= uk cat modules # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Wed Aug 7 19:37:48 2013 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. wcte12xp # Xorcom Astribank Devices xpp_usb dahdi_hardware pci::02:08.0 wcte12xp+d161:8000 Wildcard TE121 dahdi_scan [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 (VPMOCT032) location=PCI Bus 02 Slot 09 basechan=1 totchans=31 irq=0 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS/CRC4 Card is properly installed and recognized by Dahdi Freetdm is compiled with libpri and configuration is like cat /usr/local/freeswitch/conf/freetdm.conf [general] cpu_monitor = yes cpu_monitoring_interval = 2000 ; monitor usage every 2 seconds cpu_set_alarm_threshold = 90 ; whenever 90% of global CPU usage is reached, trigger the alarm. cpu_reset_alarm_threshold = 80 ; when the CPU usage decreases at 80%, clear the alarm. cpu_alarm_action = reject,warn ; Start rejecting calls when the CPU alarm is triggered and also print warnings. [span zt myDAHDISpan] trunk_type = E1 group = g1 b-channel = 1-15 d-channel = 16 b-channel = 17-31 cat /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml configuration name=freetdm.conf description=FreeTDM Configuration settings param name=debug value=1/ /settings libpri_spans span name=myDAHDISpan !-- Log Levels: none, alert, crit, err, warning, notice, info, debug -- param name=switch value=euroisdn/ param name=node value=cpe/ param name=dialect value=q931/ param name=debug value=all/ param name=dialplan value=XML/ param name=context value=public/ param name=l1 value=alaw/ /span /libpri_spans /configuration Freeswitch logs are showing 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c18][1:18] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c19][1:19] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c20][1:20] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c21][1:21] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c22][1:22] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c23][1:23] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c24][1:24] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c25][1:25] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c26][1:26] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c27][1:27] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c28][1:28] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c29][1:29] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c30][1:30] -- T316 timed out, resending RESTART
Re: [asterisk-users] Freeswitch with Digium T316 timed out, T316 timed out
My friend, You are in a wrong list, this an asterisk list, you should to be in freeswitch list Kind Regards On Thu, Aug 8, 2013 at 10:39 AM, Rajat toshniwal rajat.toshni...@tekmindz.com wrote: ** Hi I am trying to deploy freeswitch with Digium TE121 card for my office setup, but it is continuously showing Signaling is up and channels are down except D channel. Our Architecture is like We have freeswitch installed with libpri1.4 and Dahdi. I am from India and here we are having E1 trunk. Dahdi Configuration is cat system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7 19:39:07 2013 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCT1/0 Wildcard TE121 Card 0 (MASTER) span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Global data loadzone= uk defaultzone= uk cat modules # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Wed Aug 7 19:37:48 2013 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. wcte12xp # Xorcom Astribank Devices xpp_usb dahdi_hardware pci::02:08.0 wcte12xp+d161:8000 Wildcard TE121 dahdi_scan [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 (VPMOCT032) location=PCI Bus 02 Slot 09 basechan=1 totchans=31 irq=0 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS/CRC4 Card is properly installed and recognized by Dahdi Freetdm is compiled with libpri and configuration is like cat /usr/local/freeswitch/conf/freetdm.conf [general] cpu_monitor = yes cpu_monitoring_interval = 2000 ; monitor usage every 2 seconds cpu_set_alarm_threshold = 90 ; whenever 90% of global CPU usage is reached, trigger the alarm. cpu_reset_alarm_threshold = 80 ; when the CPU usage decreases at 80%, clear the alarm. cpu_alarm_action = reject,warn ; Start rejecting calls when the CPU alarm is triggered and also print warnings. [span zt myDAHDISpan] trunk_type = E1 group = g1 b-channel = 1-15 d-channel = 16 b-channel = 17-31 cat /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml configuration name=freetdm.conf description=FreeTDM Configuration settings param name=debug value=1/ /settings libpri_spans span name=myDAHDISpan !-- Log Levels: none, alert, crit, err, warning, notice, info, debug -- param name=switch value=euroisdn/ param name=node value=cpe/ param name=dialect value=q931/ param name=debug value=all/ param name=dialplan value=XML/ param name=context value=public/ param name=l1 value=alaw/ /span /libpri_spans /configuration Freeswitch logs are showing 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c18][1:18] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c19][1:19] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c20][1:20] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c21][1:21] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c22][1:22] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c23][1:23] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c24][1:24] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c25][1:25] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c26][1:26] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c27][1:27] -- T316 timed out, resending RESTART request 2013-08-08 15:38:18.633847
Re: [asterisk-users] Freeswitch with Digium T316 timed out, T316 timed out
It seems that the ISDN switch you are connected to does not respond to the RESTART message. You should investigate what the chan_dahdi.conf resetinterval parameter is set to. See chan_dahdi.conf.sample for a description. Richard -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users