[asterisk-users] ISDN PRI Caller ID problem
Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Please help me out. My zapata.conf [trunkgroups] [channels] context=pstnincoming pridialplan=local prilocaldialplan=local usecallerid=yes cidsignalling=v23 cidstart=ring hidecallerid=no callwaiting=no usecallingpres=yes sendcalleridafter=1 echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived busydetect=no busycount=6 callprogress=no faxdetect=incoming switchtype = national signalling = pri_cpe group = 1 channel = 1-15,17-31 channel = 32-46,48-62 The information I get from using pri intense debug span 1 is: [ 02 01 16 9c 08 02 15 01 05 04 03 80 90 a3 18 03 a1 83 81 70 08 c1 34 33 39 32 38 34 32 a1 ] Informational frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000EA: 1 N(S): 011 0: 0 N(R): 078 P: 0 26 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 77 to (but not including) 78 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter Protocol Discriminator: Q.931 (8) len=26 Call Ref: len= 2 (reference 5377/0x1501) (Originator) Message type: SETUP (5) [04 03 80 90 a3] Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) User information layer 1: A-Law (35) [18 03 a1 83 81] Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 ChanSel: As indicated in following octets Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 1 ] [70 08 c1 34 33 39 32 38 34 32] Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4392842' ] [a1] Sending Complete (len= 1) -- Making new call for cr 5377 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 161 (cs0, Sending Complete) q931.c:3509 q931_receive: call 5377 on channel 1 enters state 6 (Call Present) Sending Receiver Ready (12) -- Regards, Nasir. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ISDN PRI Caller ID problem
A.R. Nasir Qureshi wrote: Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Tell them they are wrong. There is no calling party number IE in that SETUP message below. :-) Matthew Fredrickson Digium, Inc. Please help me out. My zapata.conf [trunkgroups] [channels] context=pstnincoming pridialplan=local prilocaldialplan=local usecallerid=yes cidsignalling=v23 cidstart=ring hidecallerid=no callwaiting=no usecallingpres=yes sendcalleridafter=1 echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived busydetect=no busycount=6 callprogress=no faxdetect=incoming switchtype = national signalling = pri_cpe group = 1 channel = 1-15,17-31 channel = 32-46,48-62 The information I get from using pri intense debug span 1 is: [ 02 01 16 9c 08 02 15 01 05 04 03 80 90 a3 18 03 a1 83 81 70 08 c1 34 33 39 32 38 34 32 a1 ] Informational frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000EA: 1 N(S): 011 0: 0 N(R): 078 P: 0 26 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 77 to (but not including) 78 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter Protocol Discriminator: Q.931 (8) len=26 Call Ref: len= 2 (reference 5377/0x1501) (Originator) Message type: SETUP (5) [04 03 80 90 a3] Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) User information layer 1: A-Law (35) [18 03 a1 83 81] Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 ChanSel: As indicated in following octets Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 1 ] [70 08 c1 34 33 39 32 38 34 32] Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4392842' ] [a1] Sending Complete (len= 1) -- Making new call for cr 5377 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 161 (cs0, Sending Complete) q931.c:3509 q931_receive: call 5377 on channel 1 enters state 6 (Call Present) Sending Receiver Ready (12) ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] ISDN PRI Caller ID problem
Dear Matthew, Thank you for your reply. Please tell me if there is any way I can see the actual q931 message received from the card without any translation / filtration / alteration by the software or the driver ? How much the switch type or other configuration variables affect the SETUP message being received ? What I am concerned is that may be the wrong switch type or other parameter may be causing the problem. This is my first attempt at configuring an ISDN, and I want to be sure before I go after the telco. -- Regards, Nasir. A.R. Nasir Qureshi wrote: Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Dear Matthew, Thank you for your reply. Please tell me if there is any way I can see the actual q931 message received from the card without any translation / filtration / alteration by the software or the driver ? How much the switch type or other configuration variables affect the SETUP message ? This is my first attempt at configuring an ISDN, and I want to be sure before I go after the telco. Tell them they are wrong. There is no calling party number IE in that SETUP message below. :-) Matthew Fredrickson Digium, Inc. Please help me out. My zapata.conf [trunkgroups] [channels] context=pstnincoming pridialplan=local prilocaldialplan=local usecallerid=yes cidsignalling=v23 cidstart=ring hidecallerid=no callwaiting=no usecallingpres=yes sendcalleridafter=1 echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no callerid=asreceived busydetect=no busycount=6 callprogress=no faxdetect=incoming switchtype = national signalling = pri_cpe group = 1 channel = 1-15,17-31 channel = 32-46,48-62 The information I get from using pri intense debug span 1 is: [ 02 01 16 9c 08 02 15 01 05 04 03 80 90 a3 18 03 a1 83 81 70 08 c1 34 33 39 32 38 34 32 a1 ] Informational frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000EA: 1 N(S): 011 0: 0 N(R): 078 P: 0 26 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 77 to (but not including) 78 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter Protocol Discriminator: Q.931 (8) len=26 Call Ref: len= 2 (reference 5377/0x1501) (Originator) Message type: SETUP (5) [04 03 80 90 a3] Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) User information layer 1: A-Law (35) [18 03 a1 83 81] Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 ChanSel: As indicated in following octets Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 1 ] [70 08 c1 34 33 39 32 38 34 32] Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4392842' ] [a1] Sending Complete (len= 1) -- Making new call for cr 5377 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 161 (cs0, Sending Complete) q931.c:3509 q931_receive: call 5377 on channel 1 enters state 6 (Call Present) Sending Receiver Ready (12) -- Regards, Nasir. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
