Re: [asterisk-users] Zap channels on TDM400P report to be unimplemented after upgrade from Asterisk 1.2 to 1.4 - (cause 66 - Channel not implemented error)
Steve Totaro wrote: > My question is does ANYONE do ANY testing on these releases? It would > seem that this bug is so paramount to the purpose of the code that had > anyone taken a MINUTE to TEST, it would have been discovered > IMMEDIATELY. Not if you already had a zaptel udev rules script installed on the system that's used as the test machine. This was a regression do to recent Makefile changes. A test for this problem has now been added to our pre-release regression testing. Matthew Fredrickson > > sigh. > > Thanks, > Steve Totaro > > On Wed, Apr 30, 2008 at 8:41 AM, Steve Totaro > <[EMAIL PROTECTED]> wrote: >> Sean Bright to Asterisk >> >> show details 4:47 PM (15 hours ago) >> >> There is a bug in 'make install' in Zaptel 1.4.10 that causes the >> devices to not be installed correctly. You can either install 1.4.9 or >> wait for 1.4.11 to be released. >> >> >> >> On Wed, Apr 30, 2008 at 8:22 AM, Zoran Milenkovic, Datatek d.o.o. >> <[EMAIL PROTECTED]> wrote: >> > >> > >> > Hi list! >> > >> > >> > >> > I have RHEL Server rel5 (Tikanga) 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 >> > EST 2007 i686 i686 i386 GNU/Linux >> > with installed digium packets >> > >> > 1. Asterisk 1.4.19 >> > 2. Zaptel 1.4.10 >> > 3. Libpri 1.4.3 >> > >> > >> > >> > My Digium hardware is >> > >> > [EMAIL PROTECTED] ~]# zaptel_hardware >> > pci::04:00.0 wctdm+ e159:0001 Wildcard TDM400P REV I >> > >> > ...and I have 2 FXO and 2 FXS ports installed inside the TDM400P card >> > >> > >> > >> > The problem is the asterisk doesn't recognize the Zap channels at all. The >> > error is "No channel type registered for 'Zap' >> > " and "Unable to create channel of type 'Zap' (cause 66 - Channel not >> > implemented)" and there is the original output form Astersik console: >> > >> > -- Executing [EMAIL PROTECTED]:1] Dial("SIP/zoran-09f1bf90", >> "Zap/3|20") in new >> > stack >> > [Apr 30 13:17:48] WARNING[2845]: channel.c:3001 ast_request: No channel >> type >> > registered for 'Zap' >> > [Apr 30 13:17:48] WARNING[2845]: app_dial.c:1183 dial_exec_full: Unable to >> > create channel of type 'Zap' (cause 66 - Channel not implemented) >> > == Everyone is busy/congested at this time (1:0/0/1) >> > -- Executing [EMAIL PROTECTED]:2] Hangup("SIP/zoran-09f1bf90", "") in >> new stack >> > == Spawn extension (local, 12, 2) exited non-zero on >> 'SIP/zoran-09f1bf90' >> > >> > >> > And everything was working quite fine when I was on asterisk 1.2.13, >> > previously installed on this very same server, same Digium card etc. >> > >> > The configurations are totaly the same, also. >> > >> > What could be the resolution of this problem? >> > > > ___ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc. ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap channels on TDM400P report to be unimplemented after upgrade from Asterisk 1.2 to 1.4 - (cause 66 - Channel not implemented error)
My question is does ANYONE do ANY testing on these releases? It would seem that this bug is so paramount to the purpose of the code that had anyone taken a MINUTE to TEST, it would have been discovered IMMEDIATELY. sigh. Thanks, Steve Totaro On Wed, Apr 30, 2008 at 8:41 AM, Steve Totaro <[EMAIL PROTECTED]> wrote: > Sean Bright to Asterisk > > show details 4:47 PM (15 hours ago) > > There is a bug in 'make install' in Zaptel 1.4.10 that causes the > devices to not be installed correctly. You can either install 1.4.9 or > wait for 1.4.11 to be released. > > > > On Wed, Apr 30, 2008 at 8:22 AM, Zoran Milenkovic, Datatek d.o.o. > <[EMAIL PROTECTED]> wrote: > > > > > > Hi list! > > > > > > > > I have RHEL Server rel5 (Tikanga) 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 > > EST 2007 i686 i686 i386 GNU/Linux > > with installed digium packets > > > > 1. Asterisk 1.4.19 > > 2. Zaptel 1.4.10 > > 3. Libpri 1.4.3 > > > > > > > > My Digium hardware is > > > > [EMAIL PROTECTED] ~]# zaptel_hardware > > pci::04:00.0 wctdm+ e159:0001 Wildcard TDM400P REV I > > > > ...and I have 2 FXO and 2 FXS ports installed inside the TDM400P card > > > > > > > > The problem is the asterisk doesn't recognize the Zap channels at all. The > > error is "No channel type registered for 'Zap' > > " and "Unable to create channel of type 'Zap' (cause 66 - Channel not > > implemented)" and there is the original output form Astersik console: > > > > -- Executing [EMAIL PROTECTED]:1] Dial("SIP/zoran-09f1bf90", > "Zap/3|20") in new > > stack > > [Apr 30 13:17:48] WARNING[2845]: channel.c:3001 ast_request: No channel > type > > registered for 'Zap' > > [Apr 30 13:17:48] WARNING[2845]: app_dial.c:1183 dial_exec_full: Unable to > > create channel of type 'Zap' (cause 66 - Channel not implemented) > > == Everyone is busy/congested at this time (1:0/0/1) > > -- Executing [EMAIL PROTECTED]:2] Hangup("SIP/zoran-09f1bf90", "") in > new stack > > == Spawn extension (local, 12, 2) exited non-zero on 'SIP/zoran-09f1bf90' > > > > > > And everything was working quite fine when I was on asterisk 1.2.13, > > previously installed on this very same server, same Digium card etc. > > > > The configurations are totaly the same, also. > > > > What could be the resolution of this problem? > > ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Zap channels on TDM400P report to be unimplemented after upgrade from Asterisk 1.2 to 1.4 - (cause 66 - Channel not implemented error)
Sean Bright to Asterisk show details 4:47 PM (15 hours ago) There is a bug in 'make install' in Zaptel 1.4.10 that causes the devices to not be installed correctly. You can either install 1.4.9 or wait for 1.4.11 to be released. On Wed, Apr 30, 2008 at 8:22 AM, Zoran Milenkovic, Datatek d.o.o. <[EMAIL PROTECTED]> wrote: > > > Hi list! > > > > I have RHEL Server rel5 (Tikanga) 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 > EST 2007 i686 i686 i386 GNU/Linux > with installed digium packets > > 1. Asterisk 1.4.19 > 2. Zaptel 1.4.10 > 3. Libpri 1.4.3 > > > > My Digium hardware is > > [EMAIL PROTECTED] ~]# zaptel_hardware > pci::04:00.0 wctdm+ e159:0001 Wildcard TDM400P REV I > > ...and I have 2 FXO and 2 FXS ports installed inside the TDM400P card > > > > The problem is the asterisk doesn't recognize the Zap channels at all. The > error is "No channel type registered for 'Zap' > " and "Unable to create channel of type 'Zap' (cause 66 - Channel not > implemented)" and there is the original output form Astersik console: > > -- Executing [EMAIL PROTECTED]:1] Dial("SIP/zoran-09f1bf90", "Zap/3|20") > in new > stack > [Apr 30 13:17:48] WARNING[2845]: channel.c:3001 ast_request: No channel type > registered for 'Zap' > [Apr 30 13:17:48] WARNING[2845]: app_dial.c:1183 dial_exec_full: Unable to > create channel of type 'Zap' (cause 66 - Channel not implemented) > == Everyone is busy/congested at this time (1:0/0/1) > -- Executing [EMAIL PROTECTED]:2] Hangup("SIP/zoran-09f1bf90", "") in new > stack > == Spawn extension (local, 12, 2) exited non-zero on 'SIP/zoran-09f1bf90' > > > And everything was working quite fine when I was on asterisk 1.2.13, > previously installed on this very same server, same Digium card etc. > > The configurations are totaly the same, also. > > What could be the resolution of this problem? > > Here are my configs > > [EMAIL PROTECTED] ~]# cat /etc/zaptel.conf > fxsks=1 > fxsks=2 > fxols=3 > fxols=4 > > [EMAIL PROTECTED] ~]# cat /etc/asterisk/zapata.conf > [channels] > context=incoming > callerid=yes > hidecallerid=no > imidiate=no > > context=incoming > signalling=fxs_ks > echocancel=yes > group=1 > channel => 1 > channel => 2 > > context=local > signalling=fxo_ks > echocancel=yes > group=2 > channel => 3 > channel => 4 > > [EMAIL PROTECTED] ~]# cat /etc/asterisk/extensions.conf > [general] > static=yes > writeprotect=no > autofallthrough=yes > clearglobalvars=no > priorityjumping=no > > [mobile] > exten => _906NXXX,1,Dial(Zap/1/${EXTEN:1}) > exten => _906NXXX,2,Hungup() > > [outbound] > exten => _9ZX.,1,Dial(Zap/1/${EXTEN:1}) > exten => _9ZX.,2,Hangup() > > [voicemail] > exten => 31,1,VoiceMailMain([EMAIL PROTECTED]) > > exten => 33,1,VoiceMailMain([EMAIL PROTECTED]) > > [konferencija] > exten => 40,1,Meetme(40,s) > exten => 40,2,Hangup() > > [interno] > exten => 21,1,Dial(SIP/maja,20) > exten => 21,2,Hangup() > > exten => 24,1,Dial(SIP/esad,20) > exten => 24,2,Hangup() > > [local] > exten => 11,hint,SIP/cisco1 > exten => 11,1,Dial(SIP/cisco1,20) > exten => 11,2,Hangup() > > exten => 12,hint,Zap/3 > exten => 12,1,Dial(Zap/3,20) > exten => 12,2,Hangup() > > exten => 13,hint,SIP/sipura > exten => 13,1,Dial(SIP/sipura,20) > exten => 13,2,Hangup() > > exten => 14,hint,SIP/goran > exten => 14,1,Dial(SIP/goran,20) > exten => 14,2,Hangup() > > exten => 15,hint,SIP/bobana > exten => 15,1,Dial(SIP/bobana,20) > exten => 15,2,Hangup() > > exten => 16,hint,SIP/miroslav > exten => 16,1,Dial(SIP/miroslav,20) > exten => 16,2,Hangup() > > exten => 17,hint,SIP/pop > exten => 17,1,Dial(SIP/pop,20) > exten => 17,2,Hangup() > > exten => 18,hint,SIP/zoran > exten => 18,1,Dial(SIP/zoran,20) > exten => 18,2,Hangup() > > exten => 20,hint,SIP/dusan > exten => 20,1,Dial(SIP/dusan,20) > exten => 20,2,Hangup() > > include => outbound > include => mobile > include => konferencija > include => voicemail > > [incoming] > exten => 11,1,Dial(SIP/cisco1,20) > exten => 11,2,VoiceMail([EMAIL PROTECTED]) > exten => 11,3,Playback(vm-goodbye) > exten => 11,4,Hangup() > exten => 11,102,VoiceMail([EMAIL PROTECTED]) > exten => 11,103,Hangup() > > exten => 12,1,Dial(Zap/3,20) > exten => 12,2,Playback(vm-goodbye) > exten => 12,3,Hangup() > exten => 12,102,Playback(tt-allbusy) > exten => 12,103,Hangup() > > exten => 13,1,Dial(SIP/sipura,20) > exten => 13,2,VoiceMail([EMAIL PROTECTED]) > exten => 13,3,Playback(vm-goodbye) > exten => 13,102,VoiceMail([EMAIL PROTECTED]) > exten => 13,103,Hangup() > > exten => 14,1,Dial(SIP/zoran,20) > exten => 14,2,VoiceMail([EMAIL PROTECTED]) > exten => 14,3,Playback(vm-goodbye) > exten => 14,102,VoiceMail([EMAIL PROTECTED]) > exten => 14,103,Hangup() > > exten => 15,1,Dial(SIP/rzoran,20) > exten => 15,2,VoiceMail([EMAIL PROTECTED]) > exten => 15,3,Playback(vm-goodbye) > exten => 15,102,VoiceMail([EMAIL PROTECTED]) > exten => 15,103,Hangup() > > exten => 17,1,Dial(SIP/pop,20) > exten => 17,2,VoiceMail([EMAIL PROTECTED]) > exten => 17,3,Playback(vm-go
[asterisk-users] Zap channels on TDM400P report to be unimplemented after upgrade from Asterisk 1.2 to 1.4 - (cause 66 - Channel not implemented error)
Hi list! I have RHEL Server rel5 (Tikanga) 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux with installed digium packets 1. Asterisk 1.4.19 2. Zaptel 1.4.10 3. Libpri 1.4.3 My Digium hardware is [EMAIL PROTECTED] ~]# zaptel_hardware pci::04:00.0 wctdm+ e159:0001 Wildcard TDM400P REV I ...and I have 2 FXO and 2 FXS ports installed inside the TDM400P card The problem is the asterisk doesn't recognize the Zap channels at all. The error is "No channel type registered for 'Zap' " and "Unable to create channel of type 'Zap' (cause 66 - Channel not implemented)" and there is the original output form Astersik console: -- Executing [EMAIL PROTECTED]:1] Dial("SIP/zoran-09f1bf90", "Zap/3|20") in new stack [Apr 30 13:17:48] WARNING[2845]: channel.c:3001 ast_request: No channel type registered for 'Zap' [Apr 30 13:17:48] WARNING[2845]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Zap' (cause 66 - Channel not implemented) == Everyone is busy/congested at this time (1:0/0/1) -- Executing [EMAIL PROTECTED]:2] Hangup("SIP/zoran-09f1bf90", "") in new stack == Spawn extension (local, 12, 2) exited non-zero on 'SIP/zoran-09f1bf90' And everything was working quite fine when I was on asterisk 1.2.13, previously installed on this very same server, same Digium card etc. The configurations are totaly the same, also. What could be the resolution of this problem? Here are my configs [EMAIL PROTECTED] ~]# cat /etc/zaptel.conf fxsks=1 fxsks=2 fxols=3 fxols=4 [EMAIL PROTECTED] ~]# cat /etc/asterisk/zapata.conf [channels] context=incoming callerid=yes hidecallerid=no imidiate=no context=incoming signalling=fxs_ks echocancel=yes group=1 channel => 1 channel => 2 context=local signalling=fxo_ks echocancel=yes group=2 channel => 3 channel => 4 [EMAIL PROTECTED] ~]# cat /etc/asterisk/extensions.conf [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=no priorityjumping=no [mobile] exten => _906NXXX,1,Dial(Zap/1/${EXTEN:1}) exten => _906NXXX,2,Hungup() [outbound] exten => _9ZX.,1,Dial(Zap/1/${EXTEN:1}) exten => _9ZX.,2,Hangup() [voicemail] exten => 31,1,VoiceMailMain([EMAIL PROTECTED]) exten => 33,1,VoiceMailMain([EMAIL PROTECTED]) [konferencija] exten => 40,1,Meetme(40,s) exten => 40,2,Hangup() [interno] exten => 21,1,Dial(SIP/maja,20) exten => 21,2,Hangup() exten => 24,1,Dial(SIP/esad,20) exten => 24,2,Hangup() [local] exten => 11,hint,SIP/cisco1 exten => 11,1,Dial(SIP/cisco1,20) exten => 11,2,Hangup() exten => 12,hint,Zap/3 exten => 12,1,Dial(Zap/3,20) exten => 12,2,Hangup() exten => 13,hint,SIP/sipura exten => 13,1,Dial(SIP/sipura,20) exten => 13,2,Hangup() exten => 14,hint,SIP/goran exten => 14,1,Dial(SIP/goran,20) exten => 14,2,Hangup() exten => 15,hint,SIP/bobana exten => 15,1,Dial(SIP/bobana,20) exten => 15,2,Hangup() exten => 16,hint,SIP/miroslav exten => 16,1,Dial(SIP/miroslav,20) exten => 16,2,Hangup() exten => 17,hint,SIP/pop exten => 17,1,Dial(SIP/pop,20) exten => 17,2,Hangup() exten => 18,hint,SIP/zoran exten => 18,1,Dial(SIP/zoran,20) exten => 18,2,Hangup() exten => 20,hint,SIP/dusan exten => 20,1,Dial(SIP/dusan,20) exten => 20,2,Hangup() include => outbound include => mobile include => konferencija include => voicemail [incoming] exten => 11,1,Dial(SIP/cisco1,20) exten => 11,2,VoiceMail([EMAIL PROTECTED]) exten => 11,3,Playback(vm-goodbye) exten => 11,4,Hangup() exten => 11,102,VoiceMail([EMAIL PROTECTED]) exten => 11,103,Hangup() exten => 12,1,Dial(Zap/3,20) exten => 12,2,Playback(vm-goodbye) exten => 12,3,Hangup() exten => 12,102,Playback(tt-allbusy) exten => 12,103,Hangup() exten => 13,1,Dial(SIP/sipura,20) exten => 13,2,VoiceMail([EMAIL PROTECTED]) exten => 13,3,Playback(vm-goodbye) exten => 13,102,VoiceMail([EMAIL PROTECTED]) exten => 13,103,Hangup() exten => 14,1,Dial(SIP/zoran,20) exten => 14,2,VoiceMail([EMAIL PROTECTED]) exten => 14,3,Playback(vm-goodbye) exten => 14,102,VoiceMail([EMAIL PROTECTED]) exten => 14,103,Hangup() exten => 15,1,Dial(SIP/rzoran,20) exten => 15,2,VoiceMail([EMAIL PROTECTED]) exten => 15,3,Playback(vm-goodbye) exten => 15,102,VoiceMail([EMAIL PROTECTED]) exten => 15,103,Hangup() exten => 17,1,Dial(SIP/pop,20) exten => 17,2,VoiceMail([EMAIL PROTECTED]) exten => 17,3,Playback(vm-goodbye) exten => 17,102,VoiceMail([EMAIL PROTECTED]) exten => 17,103,Hangup() exten => 20,1,Dial(SIP/dusan,20) exten => 20,2,VoiceMail([EMAIL PROTECTED]) exten => 20,3,Playback(vm-goodbye) exten => 20,102,VoiceMail([EMAIL PROTECTED]) exten => 20,103,Hangup() exten => i,1,Playback(pbx-invalid) exten => i,2,Goto(incoming,s,1) exten => s,1,Answer() exten => s,2,Playback(enter-ext-of-person) exten => s,3,Hangup() exten => t,1,Playback(vm-goodbye) exten => t,2,Hangup() include => voicemail include => konferencija -- Best regards Zoran Milenkovic___ -- Bandwidth and Colocation Provided by http://www.api-digital.com