RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Hi, thanks for your help here is the show ver dump. GWSCZ01#sh ver Cisco Internetwork Operating System Software IOS (tm) 5400 Software (C5400-IS-M), Version 12.2(15)T5, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Wed 11-Jun-03 23:41 by eaarmas Image text-base: 0x6000895C, data-base: 0x6160 ROM: System Bootstrap, Version 12.2(2r)XB, RELEASE SOFTWARE (fc1) BOOTLDR: 5400 Software (C5400-BOOT-M), Version 12.2(2)XB, EARLY DEPLOYMENT RELEA SE SOFTWARE (fc2) GWSCZ01 uptime is 6 days, 10 hours, 35 minutes System returned to ROM by power-on System restarted at 11:43:47 UTC Sat Apr 14 2001 System image file is flash:c5400-is-mz.122-15.T5.bin cisco AS5400HPX (R7K) processor (revision T) with 262144K/65536K bytes of memory . Processor board ID JAE073002RX R7000 CPU at 390Mhz, Implementation 39, Rev 3.3, 256KB L2, 8192KB L3 Cache Last reset from power-on Channelized E1, Version 1.0. Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). Primary Rate ISDN software, Version 1.1. Manufacture Cookie Info: EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x31, Board Hardware Version 16.7, Item Number 800-16091-01, Board Revision C0, Serial Number JAE073002RX, PLD/ISP Version 2.2, Manufacture Date 23-Jul-2003. Processor 0x14, MAC Address 0x0C85A57F9E Backplane HW Revision 1.0, Flash Type 3.3V 2 FastEthernet/IEEE 802.3 interface(s) 68 Serial network interface(s) 168 terminal line(s) 8 Channelized E1/PRI port(s) 512K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) 8192K bytes of processor board Boot flash (Read/Write) Configuration register is 0x2102 - On Mon, 2004-12-13 at 00:39, Matt Hyne wrote: I do not have direct access to the Cisco, but I believe that he is AS5300 A show ver will confirm this and the IOS release. Please publish that info as well. I will see if I can get a similar setup going in our lab. M ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Hi, 12.2. most have bugs. You need to check version. Also you may want to try setting up a second voice codec and add alaw / ulaw as your first preferences. This may work? But I think your biggest problem is your ios version. Ps Don't forget to add you new voice codec preferences under your voice peer. Regards Michael Hatzis 0421 476 211 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Monday, 13 December 2004 11:23 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi thanks for your help . I do not have direct access to the Cisco, but I believe that he is AS5300 The ios version is 12.2 and the cisco dum config is: GWSCZ01en Password: GWSCZ01#sh run Building configuration... Current configuration : 5053 bytes ! ! Last configuration change at 05:17:58 UTC Mon Apr 16 2001 ! NVRAM config last updated at 12:06:13 UTC Sat Apr 14 2001 ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname GWSCZ01 ! no boot startup-test logging queue-limit 100 ! ! ! resource-pool disable spe default-firmware spe-firmware-1 ip subnet-zero ip cef no ip domain lookup ! isdn switch-type primary-net5 ! ! voice service voip fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none sip ! voice class codec 11 codec preference 1 g729br8 codec preference 2 g729r8 codec preference 3 gsmfr codec preference 4 g726r32 codec preference 6 g726r16 codec preference 7 g723r63 codec preference 8 g723r53 codec preference 9 g726r24 codec preference 10 g723ar63 codec preference 11 g723ar53 codec preference 12 g711ulaw codec preference 13 g711alaw codec preference 14 clear-channel ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! voice source-group cisco access-list 8 carrier-id target cisco ! ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! ! ! controller E1 7/0 framing NO-CRC4 line-termination 75-ohm ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled cas-custom 0 country bolivia ! controller E1 7/1 line-termination 75-ohm pri-group timeslots 1-31 ! controller E1 7/2 line-termination 75-ohm pri-group timeslots 1-31 description Embratel --More-- ! ! interface FastEthernet0/0 ip address y.y.y.y 255.255.255.224 duplex auto speed auto no cdp enable h323-gateway voip interface h323-gateway voip id GK01 ipaddr y.y.y.z 1719 h323-gateway voip h323-id GWSCZ01 h323-gateway voip tech-prefix 2032# ! ! ip classless ip route 0.0.0.0 0.0.0.0 y.y.y.v no ip http server ! ! ! ! ! ! call rsvp-sync ! voice-port 7/0:0 compand-type a-law ! voice-port 7/1:D ! voice-port 7/2:D ! voice-port 7/3:0 compand-type a-law ! voice-port 7/4:0 compand-type a-law ! voice-port 7/5:0 ! ! mgcp profile default ! dial-peer cor custom ! ! ! dial-peer voice voip destination-pattern 44T voice-class codec 11 session protocol sipv2 session target sip-server session transport udp ! dial-peer voice pots destination-pattern T direct-inward-dial port 7/0:0 ! sip-ua retry invite 3 retry cancel 2 sip-server ipv4:x.x.x.x ! On Sun, 2004-12-12 at 20:07, Hatzis, Michael wrote: What's the cisco box,52 / 53; version ios? can you post a config dump? Regards Michael Hatzis 0421 476 211 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Monday, 13 December 2004 10:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Excuse the insistence but I am more than one week with this problem, and I do not have any idea to solve it. You know if the configuration with GK in the Cisco, can be interfering with the RTP traffic? Thanks in advance On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Matt just for fyi incase you didn't know. I don't know what version of IOS he is running, but on release 12.1 and 12.2 there were issues with one-way audio on AS5300 and AS5800's if they were using certain combinations of h.323 and SIP. You can probably search the cisco website for more info. Just a thought. Henry Devito Telephone Connection, Inc Network Design / Implementation Phone: 402.330.7510 Fax:402.330.8586 Toshiba CTX/DK/Stratagy Certified Cisco Certified Internetwork Expert (CCIE) Voice ( VoIP) Cisco Certified Internetwork Expert (CCIE) Routing and Switching MCSE Microsoft Certified Systems Engineer RHCE Red Hat Certified Engineer -Original Message- From: [EMAIL PROTECTED] [mailto:asterisk-users- [EMAIL PROTECTED] On Behalf Of Matt Hyne Sent: Sunday, December 12, 2004 10:40 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. I do not have direct access to the Cisco, but I believe that he is AS5300 A show ver will confirm this and the IOS release. Please publish that info as well. I will see if I can get a similar setup going in our lab. M ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
voice class codec 11 codec preference 1 g729br8 codec preference 2 g729r8 codec preference 3 gsmfr codec preference 4 g726r32 codec preference 6 g726r16 codec preference 7 g723r63 codec preference 8 g723r53 codec preference 9 g726r24 codec preference 10 g723ar63 codec preference 11 g723ar53 codec preference 12 g711ulaw codec preference 13 g711alaw codec preference 14 clear-channel Why so many codecs listed in class 11? Asterisk can only use ulaw,alaw, or gsm unless licensed. Try only listing g711ulaw for testing purposes. Make sure you have all of the correct ports for RTP listed in your rtp.conf file also. Just a thought or two. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Hi, thanks for your help . here is the cisco config GWSCZ01en Password: GWSCZ01#sh run Building configuration... Current configuration : 5053 bytes ! ! Last configuration change at 05:17:58 UTC Mon Apr 16 2001 ! NVRAM config last updated at 12:06:13 UTC Sat Apr 14 2001 ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname GWSCZ01 ! no boot startup-test logging queue-limit 100 ! ! ! resource-pool disable spe default-firmware spe-firmware-1 ip subnet-zero ip cef no ip domain lookup ! isdn switch-type primary-net5 ! ! voice service voip fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none sip ! voice class codec 11 codec preference 1 g729br8 codec preference 2 g729r8 codec preference 3 gsmfr codec preference 4 g726r32 codec preference 6 g726r16 codec preference 7 g723r63 codec preference 8 g723r53 codec preference 9 g726r24 codec preference 10 g723ar63 codec preference 11 g723ar53 codec preference 12 g711ulaw codec preference 13 g711alaw codec preference 14 clear-channel ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! voice source-group cisco access-list 8 carrier-id target cisco ! ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! ! ! controller E1 7/0 framing NO-CRC4 line-termination 75-ohm ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled cas-custom 0 country bolivia ! controller E1 7/1 line-termination 75-ohm pri-group timeslots 1-31 ! controller E1 7/2 line-termination 75-ohm pri-group timeslots 1-31 description Embratel --More-- ! ! interface FastEthernet0/0 ip address y.y.y.y 255.255.255.224 duplex auto speed auto no cdp enable h323-gateway voip interface h323-gateway voip id GK01 ipaddr y.y.y.z 1719 h323-gateway voip h323-id GWSCZ01 h323-gateway voip tech-prefix 2032# ! ! ip classless ip route 0.0.0.0 0.0.0.0 y.y.y.v no ip http server ! ! ! ! ! ! call rsvp-sync ! voice-port 7/0:0 compand-type a-law ! voice-port 7/1:D ! voice-port 7/2:D ! voice-port 7/3:0 compand-type a-law ! voice-port 7/4:0 compand-type a-law ! voice-port 7/5:0 ! ! mgcp profile default ! dial-peer cor custom ! ! ! dial-peer voice voip destination-pattern 44T voice-class codec 11 session protocol sipv2 session target sip-server session transport udp ! dial-peer voice pots destination-pattern T direct-inward-dial port 7/0:0 ! sip-ua retry invite 3 retry cancel 2 sip-server ipv4:x.x.x.x ! - Where y.y.y.z = ip address of gk h323 y.y.y.v = ip default gateway x.x.x.x = ip address of Astersik y.y.y.y = ip address of Cisco And this is the asterisk configuration sip.conf [general] context=default port=5060 bindaddr=x.x.x.x srvlookup=yes videosupport=no [y.y.y.y] type=user host=y.y.y.y canreinvite=no context=fromsip dtmfmode=rfc2833 disallow=all allow=g729 allow=ulaw allow=alaw -- extensions.conf [fromsip] exten = _X.,1,Dial(Zap/g2/${EXTEN:2}) I'd be very grateful for your help on this matter Best regards, Jorge On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.000313 IP (tos 0x0, ttl 64, id 181, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.014822 IP (tos 0x68, ttl 255, id 1, offset 0, flags [none], proto 17, length: 164) y.y.y.y.18975 x.x.x.x.19927: UDP,
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Hi, I already tested those (ulow and g729) , and the rtp.conf [general] ; ; RTP start and RTP end configure start and end addresses ; rtpstart=16384 rtpend=2 ; ; Whether to enable or disable UDP checksums on RTP traffic ; ;rtpchecksums=no ~ Best regards, Jorge On Sun, 2004-12-12 at 16:54, Henry Devito wrote: voice class codec 11 codec preference 1 g729br8 codec preference 2 g729r8 codec preference 3 gsmfr codec preference 4 g726r32 codec preference 6 g726r16 codec preference 7 g723r63 codec preference 8 g723r53 codec preference 9 g726r24 codec preference 10 g723ar63 codec preference 11 g723ar53 codec preference 12 g711ulaw codec preference 13 g711alaw codec preference 14 clear-channel Why so many codecs listed in class 11? Asterisk can only use ulaw,alaw, or gsm unless licensed. Try only listing g711ulaw for testing purposes. Make sure you have all of the correct ports for RTP listed in your rtp.conf file also. Just a thought or two. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Excuse the insistence but I am more than one week with this problem, and I do not have any idea to solve it. You know if the configuration with GK in the Cisco, can be interfering with the RTP traffic? Thanks in advance On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.000313 IP (tos 0x0, ttl 64, id 181, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.014822 IP (tos 0x68, ttl 255, id 1, offset 0, flags [none], proto 17, length: 164) y.y.y.y.18975 x.x.x.x.19927: UDP, length 136 19:06:01.020312 IP (tos 0x0, ttl 64, id 182, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.040302 IP (tos 0x0, ttl 64, id 183, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.060343 IP (tos 0x0, ttl 64, id 184, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.083311 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.128314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.130316 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.165318 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.186312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 Where x.x.x.x = ip address of Astersik y.y.y.y = ip address of Cisco Two types of codecs were proven ( ulow, g729 ). When use the Asterisk with Sip phones everything works well. SipPhone--Asterisk---PSTN(B) The configurations, are the usual ones (from the wiki). the version of asterisk is 1.0.3, the linux is FC2. Please help me. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
What's the cisco box,52 / 53; version ios? can you post a config dump? Regards Michael Hatzis 0421 476 211 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Monday, 13 December 2004 10:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Excuse the insistence but I am more than one week with this problem, and I do not have any idea to solve it. You know if the configuration with GK in the Cisco, can be interfering with the RTP traffic? Thanks in advance On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.000313 IP (tos 0x0, ttl 64, id 181, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.014822 IP (tos 0x68, ttl 255, id 1, offset 0, flags [none], proto 17, length: 164) y.y.y.y.18975 x.x.x.x.19927: UDP, length 136 19:06:01.020312 IP (tos 0x0, ttl 64, id 182, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.040302 IP (tos 0x0, ttl 64, id 183, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.060343 IP (tos 0x0, ttl 64, id 184, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.083311 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.128314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.130316 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.165318 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.186312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 Where x.x.x.x = ip address of Astersik y.y.y.y = ip address of Cisco Two types of codecs were proven ( ulow, g729 ). When use the Asterisk with Sip phones everything works well. SipPhone--Asterisk---PSTN(B) The configurations, are the usual ones (from the wiki). the version of asterisk is 1.0.3, the linux is FC2. Please help me. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Hi thanks for your help . I do not have direct access to the Cisco, but I believe that he is AS5300 The ios version is 12.2 and the cisco dum config is: GWSCZ01en Password: GWSCZ01#sh run Building configuration... Current configuration : 5053 bytes ! ! Last configuration change at 05:17:58 UTC Mon Apr 16 2001 ! NVRAM config last updated at 12:06:13 UTC Sat Apr 14 2001 ! version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname GWSCZ01 ! no boot startup-test logging queue-limit 100 ! ! ! resource-pool disable spe default-firmware spe-firmware-1 ip subnet-zero ip cef no ip domain lookup ! isdn switch-type primary-net5 ! ! voice service voip fax protocol t38 ls-redundancy 2 hs-redundancy 2 fallback none sip ! voice class codec 11 codec preference 1 g729br8 codec preference 2 g729r8 codec preference 3 gsmfr codec preference 4 g726r32 codec preference 6 g726r16 codec preference 7 g723r63 codec preference 8 g723r53 codec preference 9 g726r24 codec preference 10 g723ar63 codec preference 11 g723ar53 codec preference 12 g711ulaw codec preference 13 g711alaw codec preference 14 clear-channel ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! voice source-group cisco access-list 8 carrier-id target cisco ! ! ! fax interface-type fax-mail mta receive maximum-recipients 0 ! ! ! controller E1 7/0 framing NO-CRC4 line-termination 75-ohm ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled cas-custom 0 country bolivia ! controller E1 7/1 line-termination 75-ohm pri-group timeslots 1-31 ! controller E1 7/2 line-termination 75-ohm pri-group timeslots 1-31 description Embratel --More-- ! ! interface FastEthernet0/0 ip address y.y.y.y 255.255.255.224 duplex auto speed auto no cdp enable h323-gateway voip interface h323-gateway voip id GK01 ipaddr y.y.y.z 1719 h323-gateway voip h323-id GWSCZ01 h323-gateway voip tech-prefix 2032# ! ! ip classless ip route 0.0.0.0 0.0.0.0 y.y.y.v no ip http server ! ! ! ! ! ! call rsvp-sync ! voice-port 7/0:0 compand-type a-law ! voice-port 7/1:D ! voice-port 7/2:D ! voice-port 7/3:0 compand-type a-law ! voice-port 7/4:0 compand-type a-law ! voice-port 7/5:0 ! ! mgcp profile default ! dial-peer cor custom ! ! ! dial-peer voice voip destination-pattern 44T voice-class codec 11 session protocol sipv2 session target sip-server session transport udp ! dial-peer voice pots destination-pattern T direct-inward-dial port 7/0:0 ! sip-ua retry invite 3 retry cancel 2 sip-server ipv4:x.x.x.x ! On Sun, 2004-12-12 at 20:07, Hatzis, Michael wrote: What's the cisco box,52 / 53; version ios? can you post a config dump? Regards Michael Hatzis 0421 476 211 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Monday, 13 December 2004 10:42 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Excuse the insistence but I am more than one week with this problem, and I do not have any idea to solve it. You know if the configuration with GK in the Cisco, can be interfering with the RTP traffic? Thanks in advance On Fri, 2004-12-10 at 08:37, Tenorio, Leandro wrote: Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
I do not have direct access to the Cisco, but I believe that he is AS5300 A show ver will confirm this and the IOS release. Please publish that info as well. I will see if I can get a similar setup going in our lab. M ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Cisco AS5XXX to asterisk debugging.
Pls, post your Cisco and * config files. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jorge Verastegui G Sent: Friday, December 10, 2004 12:30 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Cisco AS5XXX to asterisk debugging. Hi, I have a serious problem to configure Cisco AS5XXX and Asterisk , I trying to use asterisk for PSTN(A) Cisco AS5xxx ASteriskPSTN(B) (No Nat, no Firewall) I hear (on the PSTN(A)) clearly what the other person is saying, but the other person (on the PSTN(B) side) hears nothing from PSTN(A). I use tcpdump for debug de rtp trafic, and ouput contains 19:06:00.741293 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.763133 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.740415 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.810312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.860314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:00.980351 IP (tos 0x0, ttl 64, id 180, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.000313 IP (tos 0x0, ttl 64, id 181, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.014822 IP (tos 0x68, ttl 255, id 1, offset 0, flags [none], proto 17, length: 164) y.y.y.y.18975 x.x.x.x.19927: UDP, length 136 19:06:01.020312 IP (tos 0x0, ttl 64, id 182, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.040302 IP (tos 0x0, ttl 64, id 183, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.060343 IP (tos 0x0, ttl 64, id 184, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.083311 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.128314 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.130316 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.165318 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 19:06:01.186312 IP (tos 0x0, ttl 64, id 179, offset 0, flags [DF], proto 17, length: 60) x.x.x.x.19926 y.y.y.y.18974: [no cksum] UDP, length 32 Where x.x.x.x = ip address of Astersik y.y.y.y = ip address of Cisco Two types of codecs were proven ( ulow, g729 ). When use the Asterisk with Sip phones everything works well. SipPhone--Asterisk---PSTN(B) The configurations, are the usual ones (from the wiki). the version of asterisk is 1.0.3, the linux is FC2. Please help me. -- Jorge Verastegui G [EMAIL PROTECTED] RedCetus S.R.L. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users