Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750
Bisker, Scott (7805) wrote: > I'm timing off my PRI from Verizon as well. This is mind boggling. > All my Fax machines are fine. The modems connect, but drop the calls > after about 1-2 minutes regardless of busydetect. > That was our exact problem with Sprint when we had there T1 line. We decided to switch to Allegence and problem was gone. I just tired a data connection through the Sprint LD line we have and after 2 minutes we got dropped. If we tell the modem to only use lower speed like 28.8 it will stay connected for longer time. At 19.2 no problem they will stay connnected. Verizon might have the same problem with there lines like Sprint. That there not data lines but voice only. > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Ariel > Batista > Sent: Wednesday, April 07, 2004 12:11 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. > Adtran 750 > > > Bisker, Scott (7805) wrote: >> Same as mine. Do you know off the top of your head what firwmare >> you're using? Also, what RAS card do you have on your PCAnywhere >> side? >> > > I have firmware L36. Ras card is a Digikey 4 port board on one NT > server > and others are using the normal serial ports on the servers. The > desktops > are using there modems connected to there PC's via Serial cables. > All our > modems are USR Sporters 56K we have about 20 of them. Except for 3 > USR > Courier 56K. For our fax board we are using BrookTrout I4P on a > Windows > 2000 server with ZataFax. Everything is working off the timing from > the PRI > line. > > Asterisk is older on this installation. This installation is still > using .5 > from CVS 12/05/03. I belive if it works leave it along! And it > works just > fine! > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750
I'm timing off my PRI from Verizon as well. This is mind boggling. All my Fax machines are fine. The modems connect, but drop the calls after about 1-2 minutes regardless of busydetect. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ariel Batista Sent: Wednesday, April 07, 2004 12:11 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750 Bisker, Scott (7805) wrote: > Same as mine. Do you know off the top of your head what firwmare > you're using? Also, what RAS card do you have on your PCAnywhere > side? > I have firmware L36. Ras card is a Digikey 4 port board on one NT server and others are using the normal serial ports on the servers. The desktops are using there modems connected to there PC's via Serial cables. All our modems are USR Sporters 56K we have about 20 of them. Except for 3 USR Courier 56K. For our fax board we are using BrookTrout I4P on a Windows 2000 server with ZataFax. Everything is working off the timing from the PRI line. Asterisk is older on this installation. This installation is still using .5 from CVS 12/05/03. I belive if it works leave it along! And it works just fine! ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750
Bisker, Scott (7805) wrote: > Same as mine. Do you know off the top of your head what firwmare > you're using? Also, what RAS card do you have on your PCAnywhere > side? > I have firmware L36. Ras card is a Digikey 4 port board on one NT server and others are using the normal serial ports on the servers. The desktops are using there modems connected to there PC's via Serial cables. All our modems are USR Sporters 56K we have about 20 of them. Except for 3 USR Courier 56K. For our fax board we are using BrookTrout I4P on a Windows 2000 server with ZataFax. Everything is working off the timing from the PRI line. Asterisk is older on this installation. This installation is still using .5 from CVS 12/05/03. I belive if it works leave it along! And it works just fine! ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750
Same as mine. Do you know off the top of your head what firwmare you're using? Also, what RAS card do you have on your PCAnywhere side? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ariel Batista Sent: Wednesday, April 07, 2004 10:39 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750 Bisker, Scott (7805) wrote: > I've been trying to get a Win 2000 RAS server working with my > asterisk PBX for quite some time, to no avail. I've googled, I've > tried loads of configurations, I've rewired phone lines, and still I > am not winning the battle. > > Here's my config. > > PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. > > > I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS > channels, On-Hook messaging disabled, the rest defaults for the > channels. In zapata.conf I've tried with both busydetect=>yes and > busydetect=>no busycount=>6, busycount=>10, callprogress=>yes, > callprogress=>no all combinations. > We have 4 750's and one TSU 600 working with PC anywhere for data communications for our support department. We have on this system 2 T400P's. The only thing I can say is who are you getting your timing from. We are able to get modem calls and faxes without problems. But this is only using PRI from Allegenice. We also have a LD service T1 from Sprint that is in no way able to handle any data calls. Our Adtrans are out of the box without any changes to them. This is our settings in our zapata.conf. ; Enable echo cancellation echocancel=yes ;echocancelwhenbridged=yes immediate=no ;adsi=yes usecallerid=yes hidecallerid=no ;callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes musiconhold=default signalling = fxo_ks Hope this helps. > The weird thing is, that if I forward the incoming call from the PRI > out another channel on the PRI into a POTS line hooked into the RAS > server, the connection is fine. In my view, that rules out the PRI > and points the blame at either how the adtran is configured, or the > how the channel itself is configured. > > Can anyone with a _working_ configuration similar to this chime in > with some config info on the Zap channel and the channel bank config? > > Thanks in advance. > > -sb > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750
Bisker, Scott (7805) wrote: > I've been trying to get a Win 2000 RAS server working with my > asterisk PBX for quite some time, to no avail. I've googled, I've > tried loads of configurations, I've rewired phone lines, and still I > am not winning the battle. > > Here's my config. > > PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. > > > I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS > channels, On-Hook messaging disabled, the rest defaults for the > channels. In zapata.conf I've tried with both busydetect=>yes and > busydetect=>no busycount=>6, busycount=>10, callprogress=>yes, > callprogress=>no all combinations. > We have 4 750's and one TSU 600 working with PC anywhere for data communications for our support department. We have on this system 2 T400P's. The only thing I can say is who are you getting your timing from. We are able to get modem calls and faxes without problems. But this is only using PRI from Allegenice. We also have a LD service T1 from Sprint that is in no way able to handle any data calls. Our Adtrans are out of the box without any changes to them. This is our settings in our zapata.conf. ; Enable echo cancellation echocancel=yes ;echocancelwhenbridged=yes immediate=no ;adsi=yes usecallerid=yes hidecallerid=no ;callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes musiconhold=default signalling = fxo_ks Hope this helps. > The weird thing is, that if I forward the incoming call from the PRI > out another channel on the PRI into a POTS line hooked into the RAS > server, the connection is fine. In my view, that rules out the PRI > and points the blame at either how the adtran is configured, or the > how the channel itself is configured. > > Can anyone with a _working_ configuration similar to this chime in > with some config info on the Zap channel and the channel bank config? > > Thanks in advance. > > -sb > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
