RE: [asterisk-users] X100P how do i recieve incomming calls?
There is only one x100p card in the system thanks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tzafrir Cohen Sent: 22 January 2007 23:40 To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] X100P how do i recieve incomming calls? On Mon, Jan 22, 2007 at 08:08:16PM -, Charlie Grosvenor wrote: I have just purchased a 2nd hand X100P, Is there another X100P card in the same system? if I do a ztcfg -vv I get: Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with asterisk? I assume I need to make some sort of change to /etc/asterisk/zapata.conf in order to tell asterisk about the card? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] X100P how do i recieve incomming calls?
Dmesg reports: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.0 Echo Canceller: MG2 ACPI: PCI interrupt :00:0c.0[A] - GSI 16 (level, low) - IRQ 185 wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Wildcard X100P Capability LSM initialized When I run zttool it says that alarms: red. The card is connected to the phone line. Anybody any idea what the problem is? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charlie Grosvenor Sent: 22 January 2007 20:08 To: asterisk-users@lists.digium.com Subject: [asterisk-users] X100P how do i recieve incomming calls? I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get: Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with asterisk? I assume I need to make some sort of change to /etc/asterisk/zapata.conf in order to tell asterisk about the card? Thanks ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [asterisk-users] X100P how do i recieve incomming calls?
From:"Charlie Grosvenor" [EMAIL PROTECTED]I have just purchased a 2nd hand X100P, if I do a ztcfg -vv I get:... Channel 01: FXS Kewlstart (Default) (Slaves: 01)1 channels configured."My understanding of the above is that the zaptel driver has detected thecard. What do I now need to do, in order to get an incoming call to workwith asterisk?I assume I need to make some sort of change to /etc/asterisk/zapata.confin order to tell asterisk about the card? You want todefine a contextto use withthis channel, match the signaling with your channel driver (see examples in zapata.conf); if you create a new context, you'll need to also create a dial plan for it. Yuan Liu Thanks ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] X100P how do i recieve incomming calls?
On Mon, Jan 22, 2007 at 08:08:16PM -, Charlie Grosvenor wrote: I have just purchased a 2nd hand X100P, Is there another X100P card in the same system? if I do a ztcfg -vv I get: Zaptel Version: 1.4.0 Echo Canceller: MG2 Configuration == Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. My understanding of the above is that the zaptel driver has detected the card. What do I now need to do, in order to get an incoming call to work with asterisk? I assume I need to make some sort of change to /etc/asterisk/zapata.conf in order to tell asterisk about the card? -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users