Re: [asterisk-users] B410P BRI card testing with patgen / pattest
On Tue, Jan 28, 2014 at 11:56 AM, Rodrigo Borges Pereira rodrigoborgespere...@gmail.com wrote: (.Error 44119): Unexpected result, 255 != 0, 1 bytes since last error. Would this be the kind of output that matches a problem card or something may be wrong in my setup? I'm using DAHDI 2.8.0.1. patlooptest works by sending an incremental sequence of bytes down the transmit side (1,2,3,4,...). Then on the receive side, it watches for the same sequence. In this case, you aren't receiving any valid patterns. It's likely a configuration error (unless the card is known bad). You might try double checking your test procedure. -- Russ Meyerriecks Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA direct: +1 256-428-6025 Check us out at: www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] B410P BRI card testing with patgen / pattest
Hello Russ, Actually this was with pattest and patgen, not patlooptest. I don't know if I can use patlooptest with B410P, should I? Thanks. On Wed, Jan 29, 2014 at 6:33 PM, Russ Meyerriecks rmeyerrie...@digium.comwrote: On Tue, Jan 28, 2014 at 11:56 AM, Rodrigo Borges Pereira rodrigoborgespere...@gmail.com wrote: (.Error 44119): Unexpected result, 255 != 0, 1 bytes since last error. Would this be the kind of output that matches a problem card or something may be wrong in my setup? I'm using DAHDI 2.8.0.1. patlooptest works by sending an incremental sequence of bytes down the transmit side (1,2,3,4,...). Then on the receive side, it watches for the same sequence. In this case, you aren't receiving any valid patterns. It's likely a configuration error (unless the card is known bad). You might try double checking your test procedure. -- Russ Meyerriecks Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA direct: +1 256-428-6025 Check us out at: www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] B410P BRI card testing with patgen / pattest
On Wed, Jan 29, 2014 at 3:56 PM, Rodrigo Borges Pereira rodrigoborgespere...@gmail.com wrote: Actually this was with pattest and patgen, not patlooptest. I don't know if I can use patlooptest with B410P, should I? Sorry for the confusion. They all do the same thing. Patlooptest is patgen + pattest combined into one program. Just use whichever is easiest for your scenario. -- Russ Meyerriecks Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA direct: +1 256-428-6025 Check us out at: www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
