Re: R: [Asterisk-Users] Problem setting up TDM22B card
I have not seen the output of modprob zaptel in this thread, which has to take place before loading the other kernel drivers. Lyle so mesh s wrote: Hi, I changed the mother board (MB) but it is giving still the same problem. ouput of dmesg|tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test and I have also configured zaptel.conf correctly. Whatz next? Can I assume that it is a hardware problem? Regards, Somesh S. Shanbhag --- John Novack [EMAIL PROTECTED] wrote: somesh s wrote: Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag Have you talked with Digium support? Their answer almost always is: "Try another Motherboard" They won't supply a list that is known to work, only ones that are known NOT to work. From my limited experience, even if the MB says it is PCI 2.2, the TDM card may or may not work. If you don't want to change machines, then use an ATA or two Sipura's work great. John Novack ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
modprobe zaptel is successful. When I do lsmod zaptel is loaded. Regards, Somesh S. Shanbhag --- Lyle Giese [EMAIL PROTECTED] wrote: I have not seen the output of modprob zaptel in this thread, which has to take place before loading the other kernel drivers. Lyle so mesh s wrote: Hi, I changed the mother board (MB) but it is giving still the same problem. ouput of dmesg|tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test and I have also configured zaptel.conf correctly. Whatz next? Can I assume that it is a hardware problem? Regards, Somesh S. Shanbhag --- John Novack [EMAIL PROTECTED] wrote: somesh s wrote: Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag Have you talked with Digium support? Their answer almost always is: Try another Motherboard They won't supply a list that is known to work, only ones that are known NOT to work. From my limited experience, even if the MB says it is PCI 2.2, the TDM card may or may not work. If you don't want to change machines, then use an ATA or two Sipura's work great. John Novack ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, I changed the mother board (MB) but it is giving still the same problem. ouput of dmesg|tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test and I have also configured zaptel.conf correctly. Whatz next? Can I assume that it is a hardware problem? Regards, Somesh S. Shanbhag --- John Novack [EMAIL PROTECTED] wrote: somesh s wrote: Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag Have you talked with Digium support? Their answer almost always is: Try another Motherboard They won't supply a list that is known to work, only ones that are known NOT to work. From my limited experience, even if the MB says it is PCI 2.2, the TDM card may or may not work. If you don't want to change machines, then use an ATA or two Sipura's work great. John Novack ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Yahoo! for Good Donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, Output of scanpci -v pci bus 0x0003 cardnum 0x00 function 0x00: vendor 0xe159 device 0x0001 Tiger Jet Network Inc. Intel 537 CardVendor 0xa159 card 0x0001 (Card unknown) STATUS0x0210 COMMAND 0x0107 CLASS 0x02 0x80 0x00 REVISION 0x00 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE0 0x2001 addr 0x2000 I/O BASE1 0xe810 addr 0xe810 MEM MAX_LAT 0x80 MIN_GNT 0x01 INT_PIN 0x01 INT_LINE 0x0b BYTE_00x01 BYTE_1 0x00 BYTE_2 0x62 BYTE_3 0xec Regards, Somesh S. Shanbhag --- somesh s [EMAIL PROTECTED] wrote: Hi, I changed the mother board (MB) but it is giving still the same problem. ouput of dmesg|tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test and I have also configured zaptel.conf correctly. Whatz next? Can I assume that it is a hardware problem? Regards, Somesh S. Shanbhag --- John Novack [EMAIL PROTECTED] wrote: somesh s wrote: Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag Have you talked with Digium support? Their answer almost always is: Try another Motherboard They won't supply a list that is known to work, only ones that are known NOT to work. From my limited experience, even if the MB says it is PCI 2.2, the TDM card may or may not work. If you don't want to change machines, then use an ATA or two Sipura's work great. John Novack ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Yahoo! for Good Donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
somesh s wrote: Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag Have you talked with Digium support? Their answer almost always is: Try another Motherboard They won't supply a list that is known to work, only ones that are known NOT to work. From my limited experience, even if the MB says it is PCI 2.2, the TDM card may or may not work. If you don't want to change machines, then use an ATA or two Sipura's work great. John Novack ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, I did dmesg | tail it says ... dmesg | tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test This is small part of dmesg output which may help in diagnosing the problem. Registered Tormenta2 PCI No ISA tormenta card found at d usb.c: registered new driver wcusb Wildcard USB FXS Interface driver registered Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America) Freshmaker version: 58 00 != 18 01 != 19 02 != 18 03 != 19 04 != 18 05 != 19 06 != 18 07 != 19 08 != 18 09 != 19 0a != 18 0b != 19 . (it goes on like this which I don't understand!) f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test Can we make out something from this? Regards, Somesh S. Shanbhag --- Tzafrir Cohen [EMAIL PROTECTED] wrote: On Mon, Sep 26, 2005 at 10:00:10PM -0400, Patrick wrote: I know it seems basic but did you make sure and plug power into the board when you installed it into the PCI slot? I spent about three hours trying to get the dang thing to work in my machine until I decided to stick the card into another PCI slot. That is when I noticed that I had forgotten to ALSO plug power into the board from the power supply. Everything worked fine after that (yep, I was a noob). :-) You get a messge about it from the module at module load time. rmmod wctdm (or wcfxo) and re- modprobe it, and then run: dmesg |tail -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, I didn't get any solution in the mailing list. [http://asterisk.linkx.net/asteriskusers/200409/msg01167] What should be the next step? Changing the machine??? Is it machine dependent?... Regards, Somesh S. Shanbhag --- Tzafrir Cohen [EMAIL PROTECTED] wrote: On Tue, Sep 27, 2005 at 12:13:21AM -0700, somesh s wrote: Hi, I did dmesg | tail it says ... dmesg | tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test I'd try Digium support. But google game me also: http://asterisk.linkx.net/asteriskusers/200409/msg01167.html I haven't bothred looking at the source yet. -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend __ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
[EMAIL PROTECTED] wrote on 09/27/2005 03:13:21 AM: Hi, I did dmesg | tail it says ... dmesg | tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test The only time I've seen this it has been on a PCI 2.1 computer. On a PCI 2.2 computer, I did not see this. It also was a early TDM board. If you have a pre-Rev F board, you may want to swap it for a newer one. I am pretty sure that this error was fixed by moving from an earlier board to a Rev F. I have a Rev H now, with no issues. I have not been following this thread closely. Which chipset does your motherboard use? For the record, none of the desktop or server Intel 440-series support PCI 2.2. (Technically, a single mobile chipset, the 440MX, does support PCI 2.2) However, all of the 800-series chipsets do. The easy way to figure this out for Intel chipsets is: 1) Does the motherboard use slot processors? If so, it's PCI 2.1. 2) Does the motherboard support 133MHz PIII processors? If so, you're possibly PCI 2.2. 3) Pentium 4 chipsets are all PCI 2.2. I have no idea what other non-Intel chipsets support PCI 2.2. Reference: http://www.intel.com/design/chipsets/mature/450_440.htm http://www.intel.com/design/chipsets/mature/index.htm Tim Massey ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, Thanks for the explanation. I have Intel Pentium 4 on my motherboard. So it will be PCI 2.2 according to the explanation. (/proc/cpuinfo) It *should not* be a problem of PCI or not?. Regards, Somesh S. Shanbhag --- [EMAIL PROTECTED] wrote: [EMAIL PROTECTED] wrote on 09/27/2005 03:13:21 AM: Hi, I did dmesg | tail it says ... dmesg | tail f6 != 58 f7 != 59 f8 != 58 f9 != 59 fa != 58 fb != 59 fc != 58 fd != 59 fe != 58 Freshmaker failed register test The only time I've seen this it has been on a PCI 2.1 computer. On a PCI 2.2 computer, I did not see this. It also was a early TDM board. If you have a pre-Rev F board, you may want to swap it for a newer one. I am pretty sure that this error was fixed by moving from an earlier board to a Rev F. I have a Rev H now, with no issues. I have not been following this thread closely. Which chipset does your motherboard use? For the record, none of the desktop or server Intel 440-series support PCI 2.2. (Technically, a single mobile chipset, the 440MX, does support PCI 2.2) However, all of the 800-series chipsets do. The easy way to figure this out for Intel chipsets is: 1) Does the motherboard use slot processors? If so, it's PCI 2.1. 2) Does the motherboard support 133MHz PIII processors? If so, you're possibly PCI 2.2. 3) Pentium 4 chipsets are all PCI 2.2. I have no idea what other non-Intel chipsets support PCI 2.2. Reference: http://www.intel.com/design/chipsets/mature/450_440.htm http://www.intel.com/design/chipsets/mature/index.htm Tim Massey ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
I know it seems basic but did you make sure and plug power into the board when you installed it into the PCI slot? I spent about three hours trying to get the dang thing to work in my machine until I decided to stick the card into another PCI slot. That is when I noticed that I had forgotten to ALSO plug power into the board from the power supply. Everything worked fine after that (yep, I was a noob). :-) Patrick ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
On Mon, Sep 26, 2005 at 10:00:10PM -0400, Patrick wrote: I know it seems basic but did you make sure and plug power into the board when you installed it into the PCI slot? I spent about three hours trying to get the dang thing to work in my machine until I decided to stick the card into another PCI slot. That is when I noticed that I had forgotten to ALSO plug power into the board from the power supply. Everything worked fine after that (yep, I was a noob). :-) You get a messge about it from the module at module load time. rmmod wctdm (or wcfxo) and re- modprobe it, and then run: dmesg |tail -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il | | a Mutt's [EMAIL PROTECTED] | | best ICQ# 16849755 | | friend ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Hi, The card is detected as the following below... lspci -vb 01:01.0 Network controller: Tiger Jet Network Inc. Intel 537 Subsystem: Unknown device a159:0001 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at b800 Memory at ff8ff000 (32-bit, non-prefetchable) Capabilities: [40] Power Management version 2 Is there anything wrong? Regards, Somesh S. Shanbhag --- John Novack [EMAIL PROTECTED] wrote: Remember that you need to edit BOTH zaptel.conf AND zapata.conf to conform to your configuration Doesn't wctdm take care of both the FXO and FXS modules on the TDM400 card On my RH9 system I run: modprobe zaptel modprobe wctdm ztcfg -vv Does your MB see the TDM card? Digium's answer if it doesn't is try another Motherboard Have you mentioned your version of Asterisk and your flavor of OS? John Novack somesh s wrote: I tried modprobe wctdm also same result... Regards, Somesh S. Shanbhag --- Fabrizio Mazzoni [EMAIL PROTECTED] wrote: Try using modprobe wctdm Regards, Fabrizio Mazzoni -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di somesh s Inviato: venerdì 23 settembre 2005 11.49 A: Asterisk Users Cc: [EMAIL PROTECTED] Oggetto: [Asterisk-Users] Problem setting up TDM22B card Hi All, I have the problem setting up TDM22B card. Steps what I have followed are: [1] compiled zaptel-1.0.9.2 installed the same. [2] modprobe wcfxo /lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-8/misc/wcfxo.o: insmod /lib/modules/2.4.20-8/misc/wcfxo.o failed /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed I tried to put the card in another PCI slot also...but same result! What should I do? Please help me in this regard. Regards, Somesh S. Shanbhag __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users !DSPAM:4333d11e129761748210392! ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
I tried modprobe wctdm also same result... Regards, Somesh S. Shanbhag --- Fabrizio Mazzoni [EMAIL PROTECTED] wrote: Try using modprobe wctdm Regards, Fabrizio Mazzoni -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di somesh s Inviato: venerdì 23 settembre 2005 11.49 A: Asterisk Users Cc: [EMAIL PROTECTED] Oggetto: [Asterisk-Users] Problem setting up TDM22B card Hi All, I have the problem setting up TDM22B card. Steps what I have followed are: [1] compiled zaptel-1.0.9.2 installed the same. [2] modprobe wcfxo /lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-8/misc/wcfxo.o: insmod /lib/modules/2.4.20-8/misc/wcfxo.o failed /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed I tried to put the card in another PCI slot also...but same result! What should I do? Please help me in this regard. Regards, Somesh S. Shanbhag __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users !DSPAM:4333d11e129761748210392! ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: R: [Asterisk-Users] Problem setting up TDM22B card
Remember that you need to edit BOTH zaptel.conf AND zapata.conf to conform to your configuration Doesn't wctdm take care of both the FXO and FXS modules on the TDM400 card On my RH9 system I run: modprobe zaptel modprobe wctdm ztcfg -vv Does your MB see the TDM card? Digium's answer if it doesn't is try another Motherboard Have you mentioned your version of Asterisk and your flavor of OS? John Novack somesh s wrote: I tried modprobe wctdm also same result... Regards, Somesh S. Shanbhag --- Fabrizio Mazzoni [EMAIL PROTECTED] wrote: Try using modprobe wctdm Regards, Fabrizio Mazzoni -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di somesh s Inviato: venerdì 23 settembre 2005 11.49 A: Asterisk Users Cc: [EMAIL PROTECTED] Oggetto: [Asterisk-Users] Problem setting up TDM22B card Hi All, I have the problem setting up TDM22B card. Steps what I have followed are: [1] compiled zaptel-1.0.9.2 installed the same. [2] modprobe wcfxo /lib/modules/2.4.20-8/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-8/misc/wcfxo.o: insmod /lib/modules/2.4.20-8/misc/wcfxo.o failed /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed I tried to put the card in another PCI slot also...but same result! What should I do? Please help me in this regard. Regards, Somesh S. Shanbhag __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users !DSPAM:4333d11e129761748210392! ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
