[Bacula-users] binaries of 9.4.4 ?? rpm for CentOs

[Olivier Delestre]

Hi,

No news for the binaries of 9.4.4 (  bug fix release ) on 
https://bacula.org/packages/x ?


Today, I use the rpms for CentOs with the bacula 9.4.3 ( for test and 
9.2.2 for production )


Thanks again
Bye


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Tape SL150 (Oracle). Drive Read-Only. Licence?

[Jose Alberto]

Hi. I have an Oracle SL150 library of 2 Drive LTO5 and 96 Slot.

One of the 2 Slots does not write. weof show me result: read-only

The other drive if you write without problems.

It is possible that at a physical level there is some blockage by license
to be able to use the 2 drives completely.

Regars.


-- 
#
#   Sistema Operativo: Debian  #
#Caracas, Venezuela  #
#
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] [EXTERNAL] Re: Volume size question

[Clark, Patti via Bacula-users]

You don’t use "Maximum Volume Bytes" for tape volumes.

Patti Clark
Sr. Linux System Administrator
Oak Ridge National Laboratory

From: Olivier Delestre 
Reply-To: "olivier.deles...@univ-rouen.fr" 
Date: Thursday, June 20, 2019 at 9:25 AM
To: Jasen Lentz , bacula-users 

Subject: [EXTERNAL] Re: [Bacula-users] Volume size question

Hi,

I not an expert but i use disk storage and if y have a "Maximum Volume Bytes" 
when the max arrived , Bacula mount a new file.

For the tape it's the same.

so you can put 800+ GB (to be confirmed)


Le 20/06/2019 à 15:02, Jasen Lentz a écrit :
I noticed in the bacula-dir file, it has maximum volume set to 50GB.  What 
exactly does this mean, I have LTO-4 that can do 800+ GB, do I need ot change 
the colume size so it uses the whole tape, or does this refer to the size of a 
chunk it will write to a tape?

Thanks!
Jasen


Jasen M. Lentz, M.Ed
Lead Systems Administrator
Sesco Enterprises, LLC
4977 State Route 30 East (Mailing Address Only)
Greensburg, PA 15601
W:  (724) 837-1991 x207
C:  (412) 848-5612






___

Bacula-users mailing list

Bacula-users@lists.sourceforge.net

https://lists.sourceforge.net/lists/listinfo/bacula-users


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Connecting clients

[Jasen Lentz]

I have installed the client software on one of my LINUX systems, and can't seem 
to get it to connect:

status client="client1-fd"
Connecting to Client client1-fd at client1:9102
Failed to connect to Client client1-fd.


This is what the config on client1 looks like:
Bacula-fd.conf:
#
# Default  Bacula File Daemon Configuration file
#
#  For Bacula release 9.4.3 (02 May 2019) -- redhat
#
# There is not much to change here except perhaps the
# File daemon Name to
#
#
# Copyright (C) 2000-2015 Kern Sibbald
# License: BSD 2-Clause; see file LICENSE-FOSS
#

#
# List Directors who are permitted to contact this File daemon
#
Director {
   Name = client1-dir
   Password = 
}

Director {
   Name = BACKUP1-dir
   Password = 
}



#
# Restricted Director, used by tray-monitor to get the
#   status of the file daemon
#
Director {
  Name = client1-mon
  Password = 
  Monitor = yes
}
Director {
  Name = BACKUP1-mon
  Password = 
  Monitor = yes
}


#
# "Global" File daemon configuration specifications
#
FileDaemon {  # this is me
  Name = client1-fd
  FDport = 9102  # where we listen for the director
  WorkingDirectory = /opt/bacula/working
  Pid Directory = /opt/bacula/working
  Maximum Concurrent Jobs = 20
  Plugin Directory = /opt/bacula/plugins
}

# Send all messages except skipped files back to Director
Messages {
  Name = Standard
  director = client1-dir = all, !skipped, !restored
}
Relevant section on backup1:
Client {
  Name = client1-fd
 Address = client1
  FDPort = 9102
  Catalog = MyCatalog
  Password = 
  File Retention = 60 days   # 60 days
  Job Retention = 6 months   # six months
  AutoPrune = yes# Prune expired Jobs/Files
}

___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Volume size question

[Olivier Delestre]

Hi,

I not an expert but i use disk storage and if y have a "Maximum Volume 
Bytes" when the max arrived , Bacula mount a new file.


For the tape it's the same.

so you can put 800+ GB (to be confirmed)



Le 20/06/2019 à 15:02, Jasen Lentz a écrit :


I noticed in the bacula-dir file, it has maximum volume set to 50GB.  
What exactly does this mean, I have LTO-4 that can do 800+ GB, do I 
need ot change the colume size so it uses the whole tape, or does this 
refer to the size of a chunk it will write to a tape?


Thanks!
Jasen

Jasen M. Lentz, M.Ed

Lead Systems Administrator

Sesco Enterprises, LLC

4977 State Route 30 East (Mailing Address Only)
Greensburg, PA 15601

W:  (724) 837-1991 x207

C:  (412) 848-5612



___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] Volume size question

[Jasen Lentz]

I noticed in the bacula-dir file, it has maximum volume set to 50GB.  What 
exactly does this mean, I have LTO-4 that can do 800+ GB, do I need ot change 
the colume size so it uses the whole tape, or does this refer to the size of a 
chunk it will write to a tape?

Thanks!
Jasen


Jasen M. Lentz, M.Ed
Lead Systems Administrator
Sesco Enterprises, LLC
4977 State Route 30 East (Mailing Address Only)
Greensburg, PA 15601
W:  (724) 837-1991 x207
C:  (412) 848-5612


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Configuration difficulty

[Marcin Haba]

Hello Heitor,

Thanks for your idea about running Baculum as bacula user. Yes, in
some cases I am sure that it will be more user-friendly. I run Baculum
with default web server user to "fit" it to the system. We have couple
of ways to install Bacula:

- by distribution packages
- by packages from Bacula project
- by manual compilation from sources

Baculum should work well with all these cases, also in systems without
bacula user.

Summary from my side is that the idea is good and it should work well
in cases when bacula user is on place.

Best regards.
Marcin Haba (gani)

On Wed, 19 Jun 2019 at 13:52, Heitor Faria  wrote:
>
> Hello Marcin,
>
> I was always curious about that.
> Pgsql only supports one auth method for a given configuration.
> Since Bacula Dir and Pgsql uses Peer by default, wouldn't it be easier, more 
> user-friendly and safer if Baculum could be designed to run with the bacula 
> Linux user?
>
> Regards,
> --
> MSc Heitor Faria
> CEO Bacula LATAM
> mobile1: + 1 909 655-8971
> mobile2: + 55 61 98268-4220
> [ https://www.linkedin.com/in/msc-heitor-faria-5ba51b3 ]
> [ http://www.bacula.com.br/ ]
>
> América Latina
> [ http://bacula.lat/ | bacula.lat ] | [ http://www.bacula.com.br/ | 
> bacula.com.br ]
>
> Sent from TypeApp
> On Jun 19, 2019, at 12:24 AM, Marcin Haba  wrote:
>>
>> Hello Jasen,
>>
>> This error comes from PostgreSQL, not from Baculum itself:
>>
>> FATAL: Ident authentication failed for user "bacula"
>>
>> It means that your ident authentication doesn't work for "bacula" user
>> and password. I propose you change authentication method for Baculum
>> connection to password authentication type ('md5' in this case). More
>> information about it you can find in pg_hba.conf file in your Catalog
>> database files and in PostgreSQL documentation here:
>>
>> https://www.postgresql.org/docs/10/auth-methods.html
>>
>> Best regards.
>> Marcin Haba (gani)
>>
>> On Tue, 18 Jun 2019 at 19:55, Jasen Lentz  wrote:
>>>
>>>
>>>  I just installed Bacula according to the doc, and Baculum as well.  Baculs 
>>> runs from the command line OK.  Trying to configure baculum API and have 
>>> run into a problem with the postgres DB.  It says it cannot connect:
>>>
>>>
>>>
>>>
>>>
>>>  Error: 2, Message: Problem with connection to database. TDbConnection 
>>> failed to establish DB connection: SQLSTATE[08006] [7] FATAL: Ident 
>>> authentication failed for user "bacula"
>>>
>>>
>>>
>>>  I have tried it with a password set, and no password set.  Not sure what I 
>>> am doing incorrectly…
>>>
>>>
>>>
>>>  Thanks!
>>>
>>>  Jasen
>>>
>>>
>>>
>>> 
>>>
>>>  Bacula-users mailing list
>>>  Bacula-users@lists.sourceforge.net
>>>  https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
>>


-- 
"Greater love hath no man than this, that a man lay down his life for
his friends." Jesus Christ

"Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie
za przyjaciół swoich." Jezus Chrystus


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] Baculum error config MaximumBandwidth

[Marcin Haba]

Hello Wanderlei,

Yes, it is a bug. There is missing control to support speed value and
it causes that it is not possible to set speed type directives.

I will fix it soon. Thanks for finding it.

Best regards.
Marcin Haba (gani)

On Wed, 19 Jun 2019 at 16:07, Wanderlei Huttel
 wrote:
>
> Hello Marcin
>
> Is this a bug? (About MaximumBandwidth)
>
>
> Error 94: Config validation error.Array( [output] => JSON tool returned wrong 
> exitcode. Output:bacula-dir: ERROR TERMINATION at parse_conf.c:805 Config 
> error: expected a speed, got: 1000 : line 77, col 31 of file 
> /etc/bacula/config_AWih9F Maximumbandwidth = "1000" 19-Jun 10:02 
> bacula-dir: ERROR TERMINATION at parse_conf:805 Config error: expected a 
> speed, got 1000 : line 77, col 31 of file /etc/bacula/config_AWih9F 
> Maximumbandwidth = "1000" [exitcode] => 82)
>
> Best regards
>
> Wanderlei Hüttel
> http://www.bacula.com.br
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users



-- 
"Greater love hath no man than this, that a man lay down his life for
his friends." Jesus Christ

"Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie
za przyjaciół swoich." Jezus Chrystus


___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users

[Bacula-users] [ISSUE ] Not able to find Bacula rpm for 7.4.4-2

[Roshni Chatterjee]

Hi Team ,

I require the baseurl/repo path ( required in /etc/yum.redpos.d/Bacula.repo) 
for Bacula version 7.4.4 .
The following site  
https://bacula.org/packages/rpms
  contains only v9.0.0 to v9.4.3 . Previous versions are not available .


Any help would be  highly appreciated .


Regards,
Roshni
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users