Re: [RESEND] doc: bcm283x: update documentation for Raspberry Pi

2018-04-10 Thread Sascha Hauer 
On Mon, Apr 09, 2018 at 10:59:33AM +0200, Roland Hieber wrote:
> The old way does not seem to work for RPi 3, as the UART pins are
> mapped differently and the NOOBS bootcode does not seem to read a
> config.txt.
> 
> Signed-off-by: Roland Hieber 
> ---
>  Documentation/boards/bcm2835.rst | 34 ++
>  1 file changed, 26 insertions(+), 8 deletions(-)
> ---
> Although Sascha said he had applied the patch, I cannot find traces of
> it in the current master. It probably got lost, so I'm resending it.
> Note that this patch is independent of Lucas' RPi patch series and also
> applies to the current state of RPi support.

Applied, thanks. Yes, now I *really* did.

Sascha

> 
>  - Roland
> 
> diff --git a/Documentation/boards/bcm2835.rst 
> b/Documentation/boards/bcm2835.rst
> index 13cebb01c4..1a78cfba3c 100644
> --- a/Documentation/boards/bcm2835.rst
> +++ b/Documentation/boards/bcm2835.rst
> @@ -1,17 +1,35 @@
> -Broadcom BCM2835
> +Broadcom BCM283x
>  
>  
>  Raspberry Pi
>  
>  
> -  1. Prepare a card with a FAT filesystem. Download a tiny NOOBS LITE
> - zip archive and unpack it into FAT partition.
> - See http://www.raspberrypi.org/help/noobs-setup/ for details.
> +  1. Prepare an SD or microSD card with a FAT filesystem of at least 30 MB 
> in size.
> +   
> +  2. Download the `Raspberry Pi firmware`_ (120 MB), unzip it, and copy the
> + contents of the ``boot/`` folder to your card.
>  
> -  2. Compile ``barebox.bin`` image (use ``rpi_defconfig``).
> - Copy it to the SD/microSD card and name it ``recovery.img``.
> +  3. Use ``make rpi_defconfig; make`` to build barebox. This will create the 
> following images:
>  
> -  3. Connect to board's UART (115200 8N1);
> + - ``images/barebox-raspberry-pi-1.img`` for the BCM2835/ARM1176JZF-S 
> (Raspberry Pi 1)
> + - ``images/barebox-raspberry-pi-2.img`` for the BCM2836/CORTEX-A7 
> (Raspberry Pi 2)
> + - ``images/barebox-raspberry-pi-3.img`` for the BCM2837/CORTEX-A53 
> (Raspberry Pi 3, Raspberry Pi Zero)
> +
> + Copy the respective image for your model to your SD card and name it
> + ``barebox.img``.
> +
> +  4. Create a text file ``config.txt`` on the SD card with the following 
> content::
> +
> + kernel=barebox.img
> + enable_uart=1
> + dtoverlay=pi3-miniuart-bt
> +
> + (For more information, refer to the `documentation for config.txt`_.)
> +
> +  5. Connect to board's UART (115200 8N1);
>   Use PIN6 (GND), PIN8 (UART_TX), PIN10 (UART_RX) pins.
>  
> -  4. Turn board's power on.
> +  6. Turn board's power on.
> +
> +.. _Raspberry Pi firmware: 
> https://codeload.github.com/raspberrypi/firmware/zip/80e1fbeb78f9df06701d28c0ed3a3060a3f557ef
> +.. _documentation for config.txt: 
> https://www.raspberrypi.org/documentation/configuration/config-txt/
> -- 
> 2.11.0
> 
> 
> ___
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.   | |
Industrial Linux Solutions | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0|
Amtsgericht Hildesheim, HRA 2686   | Fax:   +49-5121-206917- |

___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[RESEND] doc: bcm283x: update documentation for Raspberry Pi

2018-04-09 Thread Roland Hieber 
The old way does not seem to work for RPi 3, as the UART pins are
mapped differently and the NOOBS bootcode does not seem to read a
config.txt.

Signed-off-by: Roland Hieber 
---
 Documentation/boards/bcm2835.rst | 34 ++
 1 file changed, 26 insertions(+), 8 deletions(-)
---
Although Sascha said he had applied the patch, I cannot find traces of
it in the current master. It probably got lost, so I'm resending it.
Note that this patch is independent of Lucas' RPi patch series and also
applies to the current state of RPi support.

 - Roland

diff --git a/Documentation/boards/bcm2835.rst b/Documentation/boards/bcm2835.rst
index 13cebb01c4..1a78cfba3c 100644
--- a/Documentation/boards/bcm2835.rst
+++ b/Documentation/boards/bcm2835.rst
@@ -1,17 +1,35 @@
-Broadcom BCM2835
+Broadcom BCM283x
 
 
 Raspberry Pi
 
 
-  1. Prepare a card with a FAT filesystem. Download a tiny NOOBS LITE
- zip archive and unpack it into FAT partition.
- See http://www.raspberrypi.org/help/noobs-setup/ for details.
+  1. Prepare an SD or microSD card with a FAT filesystem of at least 30 MB in 
size.
+   
+  2. Download the `Raspberry Pi firmware`_ (120 MB), unzip it, and copy the
+ contents of the ``boot/`` folder to your card.
 
-  2. Compile ``barebox.bin`` image (use ``rpi_defconfig``).
- Copy it to the SD/microSD card and name it ``recovery.img``.
+  3. Use ``make rpi_defconfig; make`` to build barebox. This will create the 
following images:
 
-  3. Connect to board's UART (115200 8N1);
+ - ``images/barebox-raspberry-pi-1.img`` for the BCM2835/ARM1176JZF-S 
(Raspberry Pi 1)
+ - ``images/barebox-raspberry-pi-2.img`` for the BCM2836/CORTEX-A7 
(Raspberry Pi 2)
+ - ``images/barebox-raspberry-pi-3.img`` for the BCM2837/CORTEX-A53 
(Raspberry Pi 3, Raspberry Pi Zero)
+
+ Copy the respective image for your model to your SD card and name it
+ ``barebox.img``.
+
+  4. Create a text file ``config.txt`` on the SD card with the following 
content::
+
+ kernel=barebox.img
+ enable_uart=1
+ dtoverlay=pi3-miniuart-bt
+
+ (For more information, refer to the `documentation for config.txt`_.)
+
+  5. Connect to board's UART (115200 8N1);
  Use PIN6 (GND), PIN8 (UART_TX), PIN10 (UART_RX) pins.
 
-  4. Turn board's power on.
+  6. Turn board's power on.
+
+.. _Raspberry Pi firmware: 
https://codeload.github.com/raspberrypi/firmware/zip/80e1fbeb78f9df06701d28c0ed3a3060a3f557ef
+.. _documentation for config.txt: 
https://www.raspberrypi.org/documentation/configuration/config-txt/
-- 
2.11.0


___
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox