Re: [beagleboard] Pocket beaglebone CAN is not working

[Indrajit Lawande]

Hi,
My problem is solved and CAN is working properly. Here is what is did
1. Made changes in /boot/uEnv.txt by adding device tree overlay.
2. After rebooting up using dmsg checked whether network interface is
registered or not - it is showing CAN network registered.
3. After that I just configured nete interface using
 sudo ip link set can0 type can bitrate xx , ip link set up can0
4. This is step what I was missing -  changing pin configuration
 config-pin P1.26/28 can
After this everything is working properly .


Thanks.
3.

On Tue, Dec 25, 2018, 19:49 Drew Fustini  Hello, are you still having this issue?
>
> Thanks
> Drew
>
> On Sun, Nov 25, 2018, 13:58 
>> Hi,
>> Last week I got my pocket beaglebone.
>> I am trying  CAN communication. So for that I have added CAN device tree
>> overlay in uEnx.txt as I did with beaglebone enhanced.
>>
>> But after booting when I am setting up network interface it is not
>> working.
>> When I did same thing with beaglebone enhanced board it is working
>> properly.
>> What extra changes I need to do to make this work.
>>
>> I am using IoT image without GUI from official website.
>> Please guide me on this.
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to beagleboard+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/qp2oxRPAgyU/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAEf4M_BYmBr4hXN-AP0auzGN7%2BGx0m67AMrYppM0GZ08NzR9Rw%40mail.gmail.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAHOnU8h%2BFu--N%3D_Wcmq2T-di2oOWr%3D4z9L4epSLyqKY1SB8CCg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] Pocket beaglebone CAN is not working

[Drew Fustini]

Hello, are you still having this issue?

Thanks
Drew

On Sun, Nov 25, 2018, 13:58  Hi,
> Last week I got my pocket beaglebone.
> I am trying  CAN communication. So for that I have added CAN device tree
> overlay in uEnx.txt as I did with beaglebone enhanced.
>
> But after booting when I am setting up network interface it is not
> working.
> When I did same thing with beaglebone enhanced board it is working
> properly.
> What extra changes I need to do to make this work.
>
> I am using IoT image without GUI from official website.
> Please guide me on this.
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAEf4M_BYmBr4hXN-AP0auzGN7%2BGx0m67AMrYppM0GZ08NzR9Rw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] Pocket beaglebone CAN is not working

[indra . lawande]

Hi, 
Last week I got my pocket beaglebone. 
I am trying  CAN communication. So for that I have added CAN device tree 
overlay in uEnx.txt as I did with beaglebone enhanced. 

But after booting when I am setting up network interface it is not working. 
When I did same thing with beaglebone enhanced board it is working 
properly. 
What extra changes I need to do to make this work. 

I am using IoT image without GUI from official website. 
Please guide me on this. 

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/88f19853-6544-4d2c-aa29-0301227ef4c8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.