Re: [OSL | CCIE_Voice] New 5 Labs: Lab 2 UXXC
Zero and One are already pre-recorded (by default) in UCCX, so you can use them. On Sun, Feb 12, 2012 at 12:09 AM, Randall Crumm rrcr...@yahoo.com wrote: HI, I know the steps I need to do but I am unsure of the prompts I need to record. Please let know what I need to record. I believe I need to record: 1. The number of people ahead of you is 2. zero 3. one Please let me know Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] NTP for UCCX
Hello, Do we need to set the NTP Server for UCCX Win Server? Or the NTP settings during the Initial Setup is enough? Well, at least for the exam. I cannot set the NTP Server for Win2003 (UCCX Server) - net time command does not work, as it is looking for Win Server NTP, and is not conencting to IOS NTP. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New 5 Labs: Lab 2 UXXC
There is a step to generate a number... M not in front of UCCX right now so can't tell you exact name of the step, but it is very easy to find it. In this step you tell it what you want it to gemerate, in your case number, and then provide it with the value, and then output prompt. Sent from my iPad On 11 Feb 2012, at 21:09, Randall Crumm rrcr...@yahoo.com wrote: HI, I know the steps I need to do but I am unsure of the prompts I need to record. Please let know what I need to record. I believe I need to record: 1. The number of people ahead of you is 2. zero 3. one Please let me know Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Out of Office: Fuera de Oficina
Thank you for your email. I will be out of the office until on Tuesday 14th February, and I will respond when I get back in. If it is an urgent matter, please call (55)55459105 or you can contact to Alejandro Juache. If you need support please send a email to sopo...@censystems.com.mx Regards Fredy Tafolla Gracias por su correo electronico. Estare fuera de la oficina hasta el 14 de Febrero. Le contestare una vez que este de vuelta. Si es algo urgente por favor marque al 55(55459105) o pongase en contacto con Alejandro Juache. Si necesita soporte por favor envie un email a sopo...@censystems.com.mx. Saludos Fredy Tafolla ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] New 5 Labs: Lab 2 UXXC
Prompt - Create Generated Prompt, where you have to point the String which you want to play out (in your case it would be String with value of 1 or 2 or anything you like to announce/play out. You have to select the Constructor Type as well, as it rules how the Number is played out gramaitically - 1 as First, 1 as One and etc, (there are some Types like Number, Telephone Number and etc. You can get the documentation for each type in UCCX Scripting Guides, or even in UCCX Scipr Help Files). Select the Prompt File where you want to save the Generated Prompt. You can also choose the language, or leave it as it is. After you have to use the Play Prompt step to play previously generated Prompt. On Sun, Feb 12, 2012 at 5:45 PM, George Goglidze gogli...@gmail.com wrote: There is a step to generate a number... M not in front of UCCX right now so can't tell you exact name of the step, but it is very easy to find it. In this step you tell it what you want it to gemerate, in your case number, and then provide it with the value, and then output prompt. Sent from my iPad On 11 Feb 2012, at 21:09, Randall Crumm rrcr...@yahoo.com wrote: HI, I know the steps I need to do but I am unsure of the prompts I need to record. Please let know what I need to record. I believe I need to record: 1. The number of people ahead of you is 2. zero 3. one Please let me know Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MTP and Xcoders
Hello, Assume that we have G711 and G729 MTP's in first MRG, and then Xcoder in the next MRG: MRGL oder: 1) MRG_MTP 2) MRG_Xcoder So as we know, CUCM can allocate the required MTP's based on codec - if call is going to be g711 then the G711 MTP will be allocated, and if the call is going to be G729, then G729 MTP will be allocated. But it is also possible for G729 call to use G711 MTP but with Transcoder support - IP Phone G729 to Xcoder G729, Xcoder G711 to MTP G711. So when the G729 call comes to CUCM, will the CUCM allocate G729 MTP, or will try to allocated G711 with Transacoder? Here is also another example, with the same question: MRGL order: 1) MRG_MTP_G711 2)MRG_MTP_G729 3)MRG_Xcoder In second example, as the G729 call can use G711 MTP with Transcoder support, will the CUCM allocate G711 MTP along with Transcoder, as the G711 MTP is first in order, or it will look down and allocate G729 MTP? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] NTP for UCCX
The initial setup is enough, datucha! Enviado via iPad Em 12/02/2012, às 09:51, datucha123 datucha123 datucha...@gmail.com escreveu: Hello, Do we need to set the NTP Server for UCCX Win Server? Or the NTP settings during the Initial Setup is enough? Well, at least for the exam. I cannot set the NTP Server for Win2003 (UCCX Server) - net time command does not work, as it is looking for Win Server NTP, and is not conencting to IOS NTP. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] PSTN to Remote site 2 E1 PRI no audio
Hi all I have a weird problem. I can call from PSTN to RS2 phone rings I pick up no audio..and I can reverse the call with no audio. The PSTN router is a 3725 with AIM-VOICE-30 and RS2 is a 3825w/ PVDM2-32 both using VWIC2-1MFT-T1/E1 I have no errors seconds etc.. on either controller. DSP related? Thanks, Mike ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX Scripts WB 2 Lab 7
HI, I recorded a closed prompt. I am able to find it and save it anywhere. My issues is in my script I have a play prompt step and when I use reactive debug it the prompt is not playing. I getting the error I'm sorry we are experiencing system issues... My question is does it matter where I save the newly recorded wave file and should the attribute be set to parameter to set it in the application management page? Other than that my script looks good to me. thanks for the help Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] UCCX 7 on VMWare
Hello Experts, I recently followed few steps to use UCCX on a VMWare environment but I am dealing with a few issues. I will explain first how I did it, and then I will tell you what the problem is. I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is HP, so... Everything went real smooth. As soon as the installation ended, I installed VMWare converter. I didn't install UCCX, or anything else, just the OS. I converted from Physical Machine to VMWare Infrastructure. I have a licensed VMWare server here at home. I waited a whole night for the system to be converted and transferred to my VMWare server. As I execute the machine, it gives me a bunch of errors such: Windows Activation 30 days to activate... As far as I remember, we don't have to activate Windows, do we? I really don't remember this part, but anyways... - Service Control Manager. At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details - I waited until it was completely installed to convert it to VM. If you Google Installing UCCX 7 VMware you will come across a website from blindhog. I followed Alex Hannah instructions to the dot. Does anybody recommend plain windows 2003 and registry hacks + OS Upgrades from Cisco? Thanks for the advice *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX Scripts WB 2 Lab 7
Try to delete and add again your application, i ve came through this issue and that was my workaround Thanks Typed using my thumbs iPhone On 2012-02-12, at 11:32 AM, Randall Crumm rrcr...@yahoo.commailto:rrcr...@yahoo.com wrote: HI, I recorded a closed prompt. I am able to find it and save it anywhere. My issues is in my script I have a play prompt step and when I use reactive debug it the prompt is not playing. I getting the error I'm sorry we are experiencing system issues... My question is does it matter where I save the newly recorded wave file and should the attribute be set to parameter to set it in the application management page? Other than that my script looks good to me. thanks for the help Cheers, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.comwrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.comwrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Can to telnet to the loopback of HQ-RTR; from you laptop? Also, What configs did you load? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:56:00 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.com wrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Try removing the ip mtu 1300 statement Randall Sent from my iPhone On Feb 12, 2012, at 2:03 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola HomeRouter.txt ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Hi Chase, i loaded the configs for ISR. attached to the first mail is my config. Regards. On Sun, Feb 12, 2012 at 6:59 PM, chase mergenthal cm3_...@hotmail.comwrote: Can to telnet to the loopback of HQ-RTR; from you laptop? Also, What configs did you load? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:56:00 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.comwrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Sorry, I should be more clear. When you log into the web interface, you will see Lab configs. So, which lab configs did you load? After you get the configs loaded, you should be able to enter the MAC of your PSTN phone, and at a minimum, get that registered. -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 19:08:21 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi Chase, i loaded the configs for ISR. attached to the first mail is my config. Regards. On Sun, Feb 12, 2012 at 6:59 PM, chase mergenthal cm3_...@hotmail.com wrote: Can to telnet to the loopback of HQ-RTR; from you laptop? Also, What configs did you load? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:56:00 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.com wrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Hi chase, I loaded LAB-1A. i didn't try with the PSTN Phone beacause it was LAB1 Regards, On Sun, Feb 12, 2012 at 7:13 PM, chase mergenthal cm3_...@hotmail.comwrote: Sorry, I should be more clear. When you log into the web interface, you will see Lab configs. So, which lab configs did you load? After you get the configs loaded, you should be able to enter the MAC of your PSTN phone, and at a minimum, get that registered. -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 19:08:21 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi Chase, i loaded the configs for ISR. attached to the first mail is my config. Regards. On Sun, Feb 12, 2012 at 6:59 PM, chase mergenthal cm3_...@hotmail.comwrote: Can to telnet to the loopback of HQ-RTR; from you laptop? Also, What configs did you load? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:56:00 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.comwrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? -- Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX 7 on VMWare
Hi Emanuel, If you have windows 2003 standard edition you can boot from that cd and repair your converted virtual machine. In that process you ll be providing a different serial key at the repair face. So it will take that as the active key. Hope this helps On Mon, Feb 13, 2012 at 12:55 AM, Emanuel Damasceno aedamasc...@gmail.comwrote: KP, would you mind sharing the Registry Hacks? *Emanuel Damasceno* CCNP Voice On Sun, Feb 12, 2012 at 6:54 PM, CCIEVoiceKP ccievoic...@gmail.comwrote: I installed a win2003 server on ESXi Applied the reg hacks so the CCX install cd would recognize it as an MCS server then installed CCX ... Works like a charm Of course this is for lab purposes only... KP Sent from my iPhone and I have big thumbs ... So please excuse the typos. On Feb 12, 2012, at 9:33 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: Hello Experts, I recently followed few steps to use UCCX on a VMWare environment but I am dealing with a few issues. I will explain first how I did it, and then I will tell you what the problem is. I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is HP, so... Everything went real smooth. As soon as the installation ended, I installed VMWare converter. I didn't install UCCX, or anything else, just the OS. I converted from Physical Machine to VMWare Infrastructure. I have a licensed VMWare server here at home. I waited a whole night for the system to be converted and transferred to my VMWare server. As I execute the machine, it gives me a bunch of errors such: Windows Activation 30 days to activate... As far as I remember, we don't have to activate Windows, do we? I really don't remember this part, but anyways... - Service Control Manager. At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details - I waited until it was completely installed to convert it to VM. If you Google Installing UCCX 7 VMware you will come across a website from blindhog. I followed Alex Hannah instructions to the dot. Does anybody recommend plain windows 2003 and registry hacks + OS Upgrades from Cisco? Thanks for the advice *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Ravindra Lakpriya ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue
Give it a shot... if that fails, try using the software VPN solution, with a soft phone and see what your results are... Also, what IOS are you running? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 19:50:24 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, I loaded LAB-1A. i didn't try with the PSTN Phone beacause it was LAB1 Regards, On Sun, Feb 12, 2012 at 7:13 PM, chase mergenthal cm3_...@hotmail.com wrote: Sorry, I should be more clear. When you log into the web interface, you will see Lab configs. So, which lab configs did you load? After you get the configs loaded, you should be able to enter the MAC of your PSTN phone, and at a minimum, get that registered. -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 19:08:21 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi Chase, i loaded the configs for ISR. attached to the first mail is my config. Regards. On Sun, Feb 12, 2012 at 6:59 PM, chase mergenthal cm3_...@hotmail.com wrote: Can to telnet to the loopback of HQ-RTR; from you laptop? Also, What configs did you load? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:56:00 -0400 Subject: Re: [OSL | CCIE_Voice] Proctor Labs connectivity issue From: juancarlosanz...@gmail.com To: cm3_...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi chase, This is a ping from HQ-Router to my laptop -- HQ-RTR#ping 192.168.10.15 repeat 50 Type escape sequence to abort. Sending 50, 100-byte ICMP Echos to 192.168.10.15, timeout is 2 seconds: !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!.!!.!.!.!.!.! Success rate is 52 percent (26/50), round-trip min/avg/max = 92/93/100 ms -- On Sun, Feb 12, 2012 at 6:50 PM, Juan Carlos Anzola juancarlosanz...@gmail.com wrote: Hi chase, No, i can't Regards, On Sun, Feb 12, 2012 at 6:36 PM, chase mergenthal cm3_...@hotmail.com wrote: Other than ICMP, can you access the IOS device and App servers ? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? Date: Sun, 12 Feb 2012 18:03:15 -0400 From: juancarlosanz...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Proctor Labs connectivity issue Hi Folks, I am new to proctorlabs, today scheduled my first session, configured my 2811 Home Router and started with the basic connectivity configurations. After testing connectivity within the pod, i did the same from my HomeRouter and Laptop. The weird thing is that from my HomeRouter i can ping every interface within the pod, but from my Laptop i issued Pings to different IP addresses and had 25 to 50% successfull replies. I tried with online support and they told me it was not the POD. Attached to this mail is my Router config. Any advice? Regards, -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola -- Juan Carlos Anzola ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX 7 on VMWare
Thanks for the hint Ravindra. I already deleted everything :( I will try with a plain windows server 2003, if it is too stressful I will reinstall on MCS and convert again. I will use your advice :) Thank you very much *Emanuel Damasceno* CCNP Voice On Sun, Feb 12, 2012 at 9:53 PM, Ravindra Lakpriya lakpr...@gmail.comwrote: Hi Emanuel, If you have windows 2003 standard edition you can boot from that cd and repair your converted virtual machine. In that process you ll be providing a different serial key at the repair face. So it will take that as the active key. Hope this helps On Mon, Feb 13, 2012 at 12:55 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: KP, would you mind sharing the Registry Hacks? *Emanuel Damasceno* CCNP Voice On Sun, Feb 12, 2012 at 6:54 PM, CCIEVoiceKP ccievoic...@gmail.comwrote: I installed a win2003 server on ESXi Applied the reg hacks so the CCX install cd would recognize it as an MCS server then installed CCX ... Works like a charm Of course this is for lab purposes only... KP Sent from my iPhone and I have big thumbs ... So please excuse the typos. On Feb 12, 2012, at 9:33 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: Hello Experts, I recently followed few steps to use UCCX on a VMWare environment but I am dealing with a few issues. I will explain first how I did it, and then I will tell you what the problem is. I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is HP, so... Everything went real smooth. As soon as the installation ended, I installed VMWare converter. I didn't install UCCX, or anything else, just the OS. I converted from Physical Machine to VMWare Infrastructure. I have a licensed VMWare server here at home. I waited a whole night for the system to be converted and transferred to my VMWare server. As I execute the machine, it gives me a bunch of errors such: Windows Activation 30 days to activate... As far as I remember, we don't have to activate Windows, do we? I really don't remember this part, but anyways... - Service Control Manager. At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details - I waited until it was completely installed to convert it to VM. If you Google Installing UCCX 7 VMware you will come across a website from blindhog. I followed Alex Hannah instructions to the dot. Does anybody recommend plain windows 2003 and registry hacks + OS Upgrades from Cisco? Thanks for the advice *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Ravindra Lakpriya ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX 7 on VMWare
Here's what I used: For lab testing only install normal 2003 Server, the run regedit; Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\Systems Info\OS Image] Version=2003.1.1 Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model] Hardware=7835H05 Memory=2048 Speed=2333 On Sun, Feb 12, 2012 at 11:55 AM, Emanuel Damasceno aedamasc...@gmail.comwrote: KP, would you mind sharing the Registry Hacks? *Emanuel Damasceno* CCNP Voice On Sun, Feb 12, 2012 at 6:54 PM, CCIEVoiceKP ccievoic...@gmail.comwrote: I installed a win2003 server on ESXi Applied the reg hacks so the CCX install cd would recognize it as an MCS server then installed CCX ... Works like a charm Of course this is for lab purposes only... KP Sent from my iPhone and I have big thumbs ... So please excuse the typos. On Feb 12, 2012, at 9:33 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: Hello Experts, I recently followed few steps to use UCCX on a VMWare environment but I am dealing with a few issues. I will explain first how I did it, and then I will tell you what the problem is. I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is HP, so... Everything went real smooth. As soon as the installation ended, I installed VMWare converter. I didn't install UCCX, or anything else, just the OS. I converted from Physical Machine to VMWare Infrastructure. I have a licensed VMWare server here at home. I waited a whole night for the system to be converted and transferred to my VMWare server. As I execute the machine, it gives me a bunch of errors such: Windows Activation 30 days to activate... As far as I remember, we don't have to activate Windows, do we? I really don't remember this part, but anyways... - Service Control Manager. At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details - I waited until it was completely installed to convert it to VM. If you Google Installing UCCX 7 VMware you will come across a website from blindhog. I followed Alex Hannah instructions to the dot. Does anybody recommend plain windows 2003 and registry hacks + OS Upgrades from Cisco? Thanks for the advice *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] UCCX 7 on VMWare
Dont go through the painful procedure of installing and converting your Cisco windows appliance version. straightaway install it on the ESXi or Workstation. Create a vm with 2 GB memory and 160 GB hard drive. Install from the Cisco OS cd. before installing UCCX repair your installation with the windows 2003 cd. Then its done :) On Mon, Feb 13, 2012 at 6:15 AM, CCIEVoiceKP ccievoic...@gmail.com wrote: Here's what I used: For lab testing only install normal 2003 Server, the run regedit; Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\Systems Info\OS Image] Version=2003.1.1 Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model] Hardware=7835H05 Memory=2048 Speed=2333 On Sun, Feb 12, 2012 at 11:55 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: KP, would you mind sharing the Registry Hacks? *Emanuel Damasceno* CCNP Voice On Sun, Feb 12, 2012 at 6:54 PM, CCIEVoiceKP ccievoic...@gmail.comwrote: I installed a win2003 server on ESXi Applied the reg hacks so the CCX install cd would recognize it as an MCS server then installed CCX ... Works like a charm Of course this is for lab purposes only... KP Sent from my iPhone and I have big thumbs ... So please excuse the typos. On Feb 12, 2012, at 9:33 AM, Emanuel Damasceno aedamasc...@gmail.com wrote: Hello Experts, I recently followed few steps to use UCCX on a VMWare environment but I am dealing with a few issues. I will explain first how I did it, and then I will tell you what the problem is. I installed on a MCS7835 the 2003.1.4 OS for HP Servers. The MCS we have is HP, so... Everything went real smooth. As soon as the installation ended, I installed VMWare converter. I didn't install UCCX, or anything else, just the OS. I converted from Physical Machine to VMWare Infrastructure. I have a licensed VMWare server here at home. I waited a whole night for the system to be converted and transferred to my VMWare server. As I execute the machine, it gives me a bunch of errors such: Windows Activation 30 days to activate... As far as I remember, we don't have to activate Windows, do we? I really don't remember this part, but anyways... - Service Control Manager. At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details - I waited until it was completely installed to convert it to VM. If you Google Installing UCCX 7 VMware you will come across a website from blindhog. I followed Alex Hannah instructions to the dot. Does anybody recommend plain windows 2003 and registry hacks + OS Upgrades from Cisco? Thanks for the advice *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Ravindra Lakpriya ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com