Re: [OSL | CCIE_Voice] cannot conference on CME
Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5 ! dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna vinayak_...@yahoo.com wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5 ! dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
Can you send a copy of the CME config? Also, are the DN's Octo lines? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? From: jeff.mch...@att.net Date: Mon, 4 Jun 2012 15:55:52 -0400 To: vinayak_...@yahoo.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna vinayak_...@yahoo.com wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0sccp ccm 10.50.5.1 identifier 1 version 7.0sccp!sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5!dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP!dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UPGateway Local Interface: FastEthernet0/0IPv4 Address: 10.50.5.1Port Number: 2000IP Precedence: 5User Masked Codec list: NoneCall Manager: 10.50.5.1, Port Number: 2000Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 2Reported Max Streams: 48, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g711alaw, Maximum Packetization Period: 30Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONEActive Call Manager: 10.50.5.1, Port Number: 2000TCP Link Status: CONNECTED, Profile Identifier: 1Reported Max Streams: 32, Reported Max OOS Streams: 0Supported Codec: g711ulaw, Maximum Packetization Period: 30Supported Codec: g729r8, Maximum Packetization Period: 60Supported Codec: g729br8, Maximum Packetization Period: 60Supported Codec: g729abr8, Maximum Packetization Period: 60Supported Codec: g729ar8, Maximum Packetization Period: 60Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] rsvp bandwidth problem
Thanks for the help DQ. MTP device pool was the issue. I thought I had checked everything twice. . . .details are key! On Jun 3, 2012, at 10:25 AM, Dan Quinlan (daquinla) wrote: Make sure both MTPs are in the correct device pools / regions on UCM. If your site A MTP and site C MTP are accidentally in the same region and you are configured to use G711 within the region, you will see this behavior: you negotiate bandwidth to use G711 for RSVP but throttle back when the endpoints answer and actually use G729. DQ d...@cisco.com Sent from my iPhone On Jun 2, 2012, at 4:28 PM, Alex Eldridge alexeldridg...@gmail.com wrote: I did see that bug, and already tried g729 for both intra and inter region audio in Service Parameters. Still, I see 96k initially requested (ringing). When the call connects I see 24k requested. GK isn't involved in this particular scenario. I simply have Site A (region / device pool) and Site C (region / device pool). G729 is hard set between the 2 regions. The CUCM version is 7.0.1.11000-2 and the MTP config on both site routers is below: ! dspfarm profile 1 mtp codec g729r8 codec pass-through rsvp maximum sessions software 10 associate application SCCP ! On Jun 2, 2012, at 3:04 PM, Jason Aarons (AM) wrote: Exact version of callmanager? Google intraregion codec g729 bug Intraregion Audio Codec Default to G729 to avoid CSCsl74701 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Eldridge Sent: Saturday, June 02, 2012 12:22 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] rsvp bandwidth problem I'm having an issue where I see the RSVP bandwidth request showing 96kbps, instead of 40kbps, for a g729 call (on the initial b/w request while ringing). I've double checked my config against the solutions guide and verified region settings and MTP configuration are set properly. Is this a CUCM 7.0 bug or am I missing something? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com itevomcid ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cannot conference on CME
You need an ephone-dn for conferencing - it does not need to be a dialable number. Add something like: ephone-dn 10 octo number a01 Conference ad-hoc Also, under telephony-service do conference hardware DQ d...@cisco.com Sent from my iPhone On Jun 4, 2012, at 3:52 PM, Krishna vinayak_...@yahoo.com wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5 ! dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Cannot Conference on CME
Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120604/c49d1caf/attachment-0001.html -- Message: 2 Date: Mon, 4 Jun 2012 15:55:52 -0400 From: Jeff Mchugh jeff.mch...@att.net To: Krishna vinayak_...@yahoo.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: e1cabf21-4f07-400b-9ae6-e5e859046...@att.net Content-Type: text/plain; charset=us-ascii Try adding g711alaw under conferencing Sent from my iPhone On Jun 4, 2012, at 3:02 PM, Krishna vinayak_...@yahoo.com wrote: Hi folks, i configured the transcoder and conference resources on the CME, but couldn't make them to work. When i want to conference the line, it says cannot complete the conference. here is my config: Did i miss any configuration part in this below config sccp local FastEthernet0/0 sccp ccm 10.50.5.1 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface FastEthernet0/0 associate ccm 1 priority 1 associate profile 1 register Conference associate profile 2 register mtp(mac-address of sourceinterface) keepalive retries 5 switchover method immediate switchback method immediate switchback interval 5 ! dspfarm profile 2 transcode codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 24 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 codec g729br8 codec g729abr8 codec g729ar8 maximum sessions 4 associate application SCCP here is the status of sccp: SCCP Admin State: UP Gateway Local Interface: FastEthernet0/0 IPv4 Address: 10.50.5.1 Port Number: 2000 IP Precedence: 5 User Masked Codec list: None Call Manager: 10.50.5.1, Port Number: 2000 Priority: N/A, Version: 7.0, Identifier: 1 Trustpoint: N/A Transcoding Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 2 Reported Max Streams: 48, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g711alaw, Maximum Packetization Period: 30 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 Conferencing Oper State: ACTIVE - Cause Code: NONE Active Call Manager: 10.50.5.1, Port Number: 2000 TCP Link Status: CONNECTED, Profile Identifier: 1 Reported Max Streams: 32, Reported Max OOS Streams: 0 Supported Codec: g711ulaw, Maximum Packetization Period: 30 Supported Codec: g729r8, Maximum Packetization Period: 60 Supported Codec: g729br8, Maximum Packetization Period: 60 Supported Codec: g729abr8, Maximum Packetization Period: 60 Supported Codec: g729ar8, Maximum Packetization Period: 60 Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20120604/a1b5a32d/attachment-0001.html -- Message: 3 Date: Mon, 4 Jun 2012 16:23:39 -0500 From: chase mergenthal cm3_...@hotmail.com To: jeff.mch...@att.net, vinayak_...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] cannot conference on CME Message-ID: blu171-w200d331d09e79027c75658d6...@phx.gbl Content-Type: text/plain; charset=windows-1252 Can you send