Re: [OSL | CCIE_Voice] SIP Timers fine tuning
Hi Robert, Thank you for your reply. In the CUBE Level there is an early offer forced but in the CUCM Level in the Trunk config , I didn't check MTP Required? Will that fix the issue if I checked MTP required and I will use the soft MTP resource then? Thanks, Hesham On 16 June 2013 20:52, Robert Thomas tho...@gmail.com wrote: You should look into Early offer and Early media. Perhaps you might need PRACK enabled, to cut throught the audio before the call connects. Usually your Telco can give the specific requirements you need. On Sun, Jun 16, 2013 at 8:53 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Dear All, I have a SIP Circuit to Verizon and when I call out I hear 3 rings first before the call is actually routed to the PSTN. Also , I have Automated Attendant and when I dial in to the AA the first 3 seconds are cut from the prompt? Any Ideas what parameters should I change to fix that. Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Robert Thomas Zamora tho...@gmail.com +50689389544 http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8 CCNP, CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] cti route point isnot registering
dear guys i create the cti route point,..but not registering... how can register it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] uccx integration with cucm
dear guys, what required configuration for integrate cucm with uccx..? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Bug in Cisco Unity with Unity Xfer becareful
Guys, I have tried to configure Unity Xfer at one of my customers by making CTI Route point * on the internal-pt and I made the alerting name voicemail and then I forward all to voicemail. Then making the Voicemail profile with mask. Very tricky. If you made the alerting name of * as voicemail when you call *+extension that would prompt you please enter your id followed by pound make sure the alerting name is anything different than Voicemail for example Unity Xfer or anything as this will overlap with your Pilot Thanks, Hesham ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cti route point isnot registering
Amit, Not all route points register. What is it for? Marty On Mon, Jun 17, 2013 at 11:17 AM, Amit Sharma aryan231...@gmail.com wrote: dear guys i create the cti route point,..but not registering... how can register it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] BACD Timer
hi experts, I am trying to understand timer for *param* *max-time-call-retry can anyone share there knowledge about how does it effect the bacd script and the purpose of this field* * * *Thnks* * * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] cti route point isnot registering
Amit, If this Route Point is meant for UCCX which you created from UCCX and still does not show as registered on CM, ensure that the Route Point shows under Controlled Devices section of the JTAPI application user on the CM created for UCCX. Gurpreet On Mon, Jun 17, 2013 at 11:17 AM, Amit Sharma aryan231...@gmail.com wrote: dear guys i create the cti route point,..but not registering... how can register it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] BACD Timer
I got the info below from this guide - http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html#wp1026305 It has good examples you can copy/past/edit. I believe 'Call-Queue and AA Tcl Scripts in Flash Memory: Example' is the best one to use. http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html#wp1026305 Step 29 *param* *max-time-call-retry* *seconds * Example: Router(config-app-param)# param max-time-call-retry 700 (Optional) Sets the maximum amount of time for the call-retry timer. This is the maximum period of time for which a call can stay in a call queue and retry to connect with a hunt group before the call is sent to an alternate destination number. •*seconds*—Maximum period of time, in seconds. The range is from 30 to 3600. The default is 600. On Mon, Jun 17, 2013 at 5:11 PM, CISCO CCIE VOICE ccievoic...@gmail.comwrote: hi experts, I am trying to understand timer for *param* *max-time-call-retry can anyone share there knowledge about how does it effect the bacd script and the purpose of this field* * * *Thnks* * * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
