Re: [OSL | CCIE_Voice] Clocking for GW
Under your se0/0/0:15 interface add: Isdn layer1-protocol-emulate network Hth Lorenz Il giorno lunedì 1 luglio 2013, Karen Johnson ha scritto: hi folks, when we were asked to do below : what is the right command and verification? Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] max session conference and xcode
Hw dsp resources Il giorno lunedì 1 luglio 2013, Karen Johnson ha scritto: hi folks, when we configure conference and transcode. - what is the max session count based on ? I assume for transcode is the cti port for UCCX and CUE, any other consideration? - how about for the conference session ? tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Clocking for GW
Hi Lorenz, I have tried that at my home lab now and under s0/0/0:23 or 15 i don't have an option for that also I have removed network-clock-participate 1 t1 0/0/0 not working??? any ideas?? Thanks a lot On Jun 30, 2013, at 11:49 PM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Thanks for that great information. I wonder should I do that for all routers R1 , R2 and R3? Because as far as i remember it's just mentioned in the beginning of the Voice Gateway section not individually per each router? Thanks, Hesham On Jun 30, 2013, at 11:16 PM, LorenzLGRC lorenzl...@gmail.com wrote: Under your se0/0/0:15 interface add: Isdn layer1-protocol-emulate network Hth Lorenz Il giorno lunedì 1 luglio 2013, Karen Johnson ha scritto: hi folks, when we were asked to do below : what is the right command and verification? Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Clocking for GW
Thanks for that great information. I wonder should I do that for all routers R1 , R2 and R3? Because as far as i remember it's just mentioned in the beginning of the Voice Gateway section not individually per each router? Thanks, Hesham On Jun 30, 2013, at 11:16 PM, LorenzLGRC lorenzl...@gmail.com wrote: Under your se0/0/0:15 interface add: Isdn layer1-protocol-emulate network Hth Lorenz Il giorno lunedì 1 luglio 2013, Karen Johnson ha scritto: hi folks, when we were asked to do below : what is the right command and verification? Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. tks K ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user
It is a bug. CLI to Pub and enter this command: run sql update processconfig set paramvalue=T where paramname like '%nstalled%' Do this before you go into users I do it in the beginning of the labs since it is always an issue with the proctor labs Racks EF On Mon, Jul 1, 2013 at 12:04 AM, Amit Sharma aryan231...@gmail.com wrote: guys, anyone using proctor lab and use this issue? iPCC extension not showing... rmcm not showing under cucm? how can fix it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Clocking for GW
Hello, the correct command is: isdn protocol-emulate network on the network side. This will emulate your telco ISDN network. Why did you remove the network-clock-participate command? hth lorenz On Mon, Jul 1, 2013 at 8:55 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote: Hi Lorenz, I have tried that at my home lab now and under s0/0/0:23 or 15 i don't have an option for that also I have removed network-clock-participate 1 t1 0/0/0 not working??? any ideas?? Thanks a lot http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user
About the rmcm user not showing under cucm: Just go to uccx , log in to appadmin page, system menu Cisco Unified CM Configuration RmCm subystem section, change it to different name , then click ok , check cucm application users page , it will be there , then change it back in uccx to the old user name and ok. Hope that helps. Regards. Khaled Date: Mon, 1 Jul 2013 05:59:03 -0400 From: ejzi...@gmail.com To: aryan231...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user It is a bug.CLI to Pub and enter this command: run sql update processconfig set paramvalue=T where paramname like '%nstalled%' Do this before you go into users I do it in the beginning of the labs since it is always an issue with the proctor labs Racks EF On Mon, Jul 1, 2013 at 12:04 AM, Amit Sharma aryan231...@gmail.com wrote: guys, anyone using proctor lab and use this issue? iPCC extension not showing... rmcm not showing under cucm? how can fix it? -- Thanks Regard'sAmit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
It seems nobody cares! It's very disappointing. Date: Sun, 30 Jun 2013 12:49:25 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? To: dwar...@epochuniversal.com; khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com CC: supp...@ipexpert.com; supp...@proctorlabs.com i can not power up most server and sometimes vpn also failed to work. but when u open ticket , suppprt usually our end is good , please check your side. From: Dane Warner dwar...@epochuniversal.com To: khaled Saholy khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Cc: support (supp...@ipexpert.com) supp...@ipexpert.com; supp...@proctorlabs.com supp...@proctorlabs.com Sent: Sunday, June 30, 2013 1:07:41 PM Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn’t work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got ‘Connecting’ in the browser, no further. Never could do anything with CallManager. I reverted and loaded two other labs, same issue. It seems the Pod29 was extremely messed up. Saturday’s session loaded a completely different lab from the one I requested. Had to revert and load again, 25 minutes down the drain. Proctorlabs Support, I am requesting two vouchers for the 8 hour session that I couldn’t work on. There are some serious bugs in your lab gear. Regards, Dane Warner, CCVPSr. Network EngineerEpoch Universal, Inc.(909)226-0755dwar...@epochuniversal.comFrom: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of khaled Saholy Sent: Sunday, June 30, 2013 11:08 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] How to configure Clocking for GW's
How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! ! !Hope this helps clarify the clocking issues and configuration. ! ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?
Wayne can definitely do something about it I guess. I had very much similar issues last month ... Sent from my iPhone On 1 juil. 2013, at 15:09, khaled Saholy khaled_sah...@hotmail.com wrote: It seems nobody cares! It's very disappointing. Date: Sun, 30 Jun 2013 12:49:25 -0700 From: karen.johnson...@yahoo.ca Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? To: dwar...@epochuniversal.com; khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com CC: supp...@ipexpert.com; supp...@proctorlabs.com i can not power up most server and sometimes vpn also failed to work. but when u open ticket , suppprt usually our end is good , please check your side. From: Dane Warner dwar...@epochuniversal.com To: khaled Saholy khaled_sah...@hotmail.com; ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Cc: support (supp...@ipexpert.com) supp...@ipexpert.com; supp...@proctorlabs.com supp...@proctorlabs.com Sent: Sunday, June 30, 2013 1:07:41 PM Subject: Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn’t work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got ‘Connecting’ in the browser, no further. Never could do anything with CallManager. I reverted and loaded two other labs, same issue. It seems the Pod29 was extremely messed up. Saturday’s session loaded a completely different lab from the one I requested. Had to revert and load again, 25 minutes down the drain. Proctorlabs Support, I am requesting two vouchers for the 8 hour session that I couldn’t work on. There are some serious bugs in your lab gear. Regards, Dane Warner, CCVP Sr. Network Engineer Epoch Universal, Inc. (909)226-0755 dwar...@epochuniversal.com From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of khaled Saholy Sent: Sunday, June 30, 2013 11:08 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends? Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the support if I can extend my current session by booking a new following session but no one answered. I tried booking a new following session hoping it will be linked up automatically but unfortunately it didn't. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Hi Michal, As i can see that Clock source line command which is by default enable further can u give an example for both User Side and Network Side means can u past the commands that indicates both user and Network Side Thanks On Mon, Jul 1, 2013 at 7:00 PM, ccie_voice-requ...@onlinestudylist.comwrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: How to configure Clocking for GW's (michael.se...@compucom.com) -- Message: 1 Date: Mon, 1 Jul 2013 15:09:31 + From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How to configure Clocking for GW's Message-ID: E88AFBC60579234C886F57D49AC243A937026EA9@SPW099EXM06.compucom.local Content-Type: text/plain; charset=us-ascii How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! ! !Hope this helps clarify the clocking issues and configuration. ! ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 89, Issue 4 * ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? Thanks On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
When you say L1 and L2 are you talking about layer 1 and 2 of the OSI Model? Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems From: CISCO CCIE VOICE [mailto:ccievoic...@gmail.com] Sent: Monday, July 01, 2013 12:58 PM To: Sears, Michael (msears) Cc: ccie_voice@onlinestudylist.com Subject: Re: CCIE_Voice Digest, Vol 89, Issue 4 Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? Thanks On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.commailto:michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 Designing and Implementing Cisco Unified Communications on Unified Computing Systems ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4
Yes, i am saying Layer 1 and Layer 2 of ISO Model On Mon, Jul 1, 2013 at 10:53 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: When you say L1 and L2 are you talking about layer 1 and 2 of the OSI Model? ** ** Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** *From:* CISCO CCIE VOICE [mailto:ccievoic...@gmail.com] *Sent:* Monday, July 01, 2013 12:58 PM *To:* Sears, Michael (msears) *Cc:* ccie_voice@onlinestudylist.com *Subject:* Re: CCIE_Voice Digest, Vol 89, Issue 4 ** ** Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2 USER SIDE in that case ** ** controller t1 0/0/0 clock source line -L1 Network Side (This is by default enable no need to add it) ** ** and for L2: USER SIDE do we need to add any additional commands under serial interface 0/0/0:23 ? ** ** Thanks ** ** ** ** On Mon, Jul 1, 2013 at 9:29 PM, Sears, Michael (msears) michael.se...@compucom.com wrote: NETWORK SIDE: ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! USER SIDE BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode B8ZS framing ESF description ==VOICE PRI== ! ! interface Serial0/1/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn send-alerting isdn sending-complete isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! BR1-RTR#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Line. ! Michael Sears, CCIE(V)#38404 “Designing and Implementing Cisco Unified Communications on Unified Computing Systems” ** ** ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 5
. So after that I had to stop my work after feeling frustrated. Today I booked three consecutive sessions but the same problem happened again but in a different form. I noticed the remaining time is 3 hrs and 40 minutes in the first session and informed the support guys but no one is answering. After finishing my first session, I thought it will be disconnected but the remaining time changed to 24 hours. Okay feeling happy with the new hours but then maybe after about 30 minutes I found my telnet session got disconnected and I can't access them or access the servers and after refreshing my account at Proctorlabs site , I found the pod has changed. So means everything has gone. The sessions were not linked-up as what they told us. I just wonder whom to complain in such cases? BTW,I also schedule sessions in the other competitor company vracks but to say the truth I found their support and response are very good. Not only that but they gave me back my credits and more. Thanks for any help and regards. Khaled Al-Saholy No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.3345 / Virus Database: 3204/6445 - Release Date: 06/27/13 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20130701/49ba090e/attachment-0001.html -- Message: 2 Date: Mon, 1 Jul 2013 21:16:35 +0300 From: CISCO CCIE VOICE ccievoic...@gmail.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, michael.se...@compucom.com Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 89, Issue 4 Message-ID: CABPd02SvZDqQA1XNahG= usa75nsceqr0dgyx_m7-wyktzng...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi Michal, As i can see that Clock source line command which is by default enable further can u give an example for both User Side and Network Side means can u past the commands that indicates both user and Network Side Thanks On Mon, Jul 1, 2013 at 7:00 PM, ccie_voice-requ...@onlinestudylist.com wrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: How to configure Clocking for GW's (michael.se...@compucom.com) -- Message: 1 Date: Mon, 1 Jul 2013 15:09:31 + From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] How to configure Clocking for GW's Message-ID: E88AFBC60579234C886F57D49AC243A937026EA9@SPW099EXM06.compucom.local Content-Type: text/plain; charset=us-ascii How to set clocking for PSTN Router and Branch Routers Example using MGCP gateway: ! ! Question: Take clocking for Layer 1 from Network side. --Means PSTN is Network Side Your PRI clocking of layer 2 should be user side. --Means Branch takes clock from PSTN ! ! PSTN ROUTER network-clock-participate wic 1 controller T1 0/1/0 clock source internal linecode B8ZS framing ESF pri-group timeslots 1-24 clock source internal Makes PSTN the Network Side description ** T1 PRI Voice Connection To: S0/1/0 BR1-RTR ** ! ! interface Serial0/1/0:23 description ** T1 VOICE CONNECTION TO S0/1/0 BR1-RTR ** no ip address encapsulation hdlc isdn switch-type primary-ni isdn protocol-emulate network Makes PSTN the Network Side isdn incoming-voice voice isdn negotiate-bchan resend-setup isdn outgoing display-ie isdn outgoing ie redirecting-number no cdp enable ! ! PSTN#show controller t1 0/1/0 T1 0/1/0 is up. Framing is ESF, Line Code is B8ZS, Clock Source is Internal. ! ! BRANCH ROUTERS USING T1 MGCP isdn switch-type primary-ni network-clock-participate wic 0 network-clock-select 1 T1 0/1/0 controller T1 0/0/0 pri-group timeslots 1-24 service mgcp clock source line Makes Router the user Side gets clock from PSTN linecode
[OSL | CCIE_Voice] Lab Query
Hey Guys, Do we have access to the Help page within the CUCM in lab? Do they block it? Can you click on service parameters to get the description? Aman Kapuria ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUE Live Reply and Notification
Hi Guys, I have few queries related to CUE. Appreciate if someone can comment from their experience with CUE. 1. I can't seem to get live reply working in CUE integrated with CME (Ref# IPExpert 5 Labs lab 4). I get This message cannot get a reply or something along those lines. Has anyone tested this? 2. For notification, I can't seem to get CUE to call out to PSTN (notification device) when a message is left for the user. Notification is enabled system wide, enabled on the user, notification destination is specified within CUE, there is no restriction table, and notification is enabled for all messages 24x7. I can't see CUE even trying to call out (debug on CME). 3. Finally, do we get GUI access to cue in lab? For advanced cue tasks I think it would be good to have access to GUI. Aman Kapuria ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
