[OSL | CCIE_Voice] (no subject)
AM i in right forum guys no message here anyone around Ping ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
[OSL | CCIE_Voice] (no subject)
When I am applying ip pim sparse-dense mode on virtual template 200 of HQ and BR1 routers, Which are connected by Frame relay ,. The Two routers stop pinging each other. What could be the issue.?? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Hi i am going for ccie voice lab in November. can anyone guide if i get ccie number then after 14th Feb 2014 ,my ccie no will be valid or not Sent from Samsung Mobile___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
No you will still be a CCIE You will just be in a retired track You will be able to upgrade to CCIE collaboration by passing the CCIE collaboration written exam Good luck on you lab Sent from my iPhone On Jul 8, 2013, at 12:22 PM, Dharambirku dharambi...@gmail.com wrote: Hi i am going for ccie voice lab in November. can anyone guide if i get ccie number then after 14th Feb 2014 ,my ccie no will be valid or not Sent from Samsung Mobile ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Dear All, Whats is the real meaning of MGCP tear down. Is it means dropping a call or , What ? thanks for your valuable input. Ravi, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Hey ravi, I believe it means that mgcp packets was disrupted in between transmission resulting in packet loss etc. This error implies that there is a bug in the ios. Try upgrading the ios and check Regards Shabeeb On 21 May 2013 04:28, ie ravindra ieravin...@gmail.com wrote: Dear All, Whats is the real meaning of MGCP tear down. Is it means dropping a call or , What ? thanks for your valuable input. Ravi, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Hi I have one query please guide.. One user is complaining that MWI light not work if new voice msg comes but when 5 new messeges are stored on unity express then light goes on. So where is the issue on Looking forward to ur response Thanks Dharambir Cme and unity express Sent from Samsung Mobile___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Dear All On Board, I am in approach for the exam in coming June. Unfortunately due to my fathers illness I was not covered all the subject areas. I have covered only conceptual parts. I am not wanted to loose my exam at the first time. I want to do it however with outstanding performance. What are the suggestion to be in subject for next three months.I have completed 70% and I do have relevent practicals on 50%. Thanks, Ravi. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
-- Thanks Regards Abhishek Bansal ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
the trick here is in your patterns digit analysis. You need the put the expected digits to seperate LD from say Local or international try this out and see what happens ... 911 - marked as urgent priority 9.[2-9]XX - discard digit predot 90112.XXX- discard digit predot and of course you can change this how you wan to but you need to differentiate betwwen Local, LD and Int dialing. The way to do this is with the prepending digits...so for NANP dialing you would have.. 911 urgent 9.[2-9]XX local 7 digit 9.1[2-9]..[2-9].. LD 11 digit (10 digit will always work) 9.011! international pattern now enblock or digit by digit analysis will succeed. Message: 2 Date: Thu, 12 Jul 2012 13:51:27 +0300 From: The Masterplan winmasterp...@gmail.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Overlapping route patterns Message-ID: CAKsL8KB9k2=w5efs8yoww6ghsyojnt0+yiatitjouqjrwso...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 Hi, I have the following route patterns on CUCM that have a mgcp gateway in route list: 911 - marked as urgent priority 9.XXX - discard digit predot 91112.XXX- discard digit predot Because those are overlapping route patterns, their behaviour is different depending if enbloc dialing is used or not: From: ccie_voice-boun...@onlinestudylist.com [ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccie_voice-requ...@onlinestudylist.com [ccie_voice-requ...@onlinestudylist.com] Sent: Thursday, July 12, 2012 12:00 PM To: ccie_voice@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 77, Issue 19 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: CUC imported users behaviour (Kevin Spicer) 2. Overlapping route patterns (The Masterplan) 3. Re: Overlapping route patterns (Dan Quinlan (daquinla)) -- Message: 1 Date: Wed, 11 Jul 2012 19:02:55 +0100 From: Kevin Spicer ke...@kevinspicer.co.uk To: The Masterplan winmasterp...@gmail.com Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] CUC imported users behaviour Message-ID: caf2ggoqrtl602iv-vun-57bqw8jt5rgedg8p1xbeccare4+...@mail.gmail.com Content-Type: text/plain; charset=iso-8859-1 I don't have it to hand, that was from memory :( but if you search.the archive for those commands I have posted it before. On 11 Jul 2012 18:41, The Masterplan winmasterp...@gmail.com wrote: Awesome Kevin. I got burned 1 day by this bug. Can you give me the cisco troubleshoot link from where you get those commands? Thank you once again. On Wed, Jul 11, 2012 at 8:17 PM, Kevin Spicer ke...@kevinspicer.co.ukwrote: There's a bug in cuc that prevents mail from pstn being delivered if the smtp domain has been changed. Perhaps you hit that (affects the 5 lab workbook lab rentals). run cuc dbquery unitydirdb select * from tbl_alias to see if domains all match. If not fix with run cuc dbquery unitydirdb EXECUTE PROCEDURE csp_SmtpAddressMigrate(' new.com','old.com') (substitute the correct old and new domain) On 11 Jul 2012 18:03, The Masterplan winmasterp...@gmail.com wrote: Hi, I am struggling with a strange CUC behaviour and I am interested if anyone experienced this. For users imported from CUC, no message is being recorded in user mailbox, altough the system play (after the user press # for more options and then 1 to send this message ) your message has been sent. On that imported user, if I go to edit- Mailbox it shows that the number of messages is 0. If I create users from CUC administration everything is working fine, I receive MWI and I see the corresponding number of messages in user mailbox. In order to solve this issue, I deactivated/activated all the unity services and then I restarted CUCM and CUC and still nothing. I usually activate all the CUC services and then I start to configure it (Phone System, Port group, Port, User templates etc) and in this case I've done the same. Thank you experts, ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next
[OSL | CCIE_Voice] (no subject)
http://fatloss.acaiberrysupplementsite.com/wp-content/uploads/fgallery/tokare.html?cl=unydqk ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
http://mimi-knoop.com/wp-content/themes/organic_portfolio_white/work.php?wonder53.jpg___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Hey, dude! Look at this! You will be really surprised!... http://www.cercasa.it/comp.link.php?rjwgoogleId=08e0 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Please unsubscribe me from this list. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Did you enable it in Service Parameters? HTH From: Ray jonha...@yahoo.com Reply-To: Ray jonha...@yahoo.com Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT) To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0 ! ! ! router ospf 1 log-adjacency-changes network 18.1.1.1 0.0.0.0 area 0 network 177.0.101.0 0.0.0.255 area 0 network 177.2.11.0 0.0.0.255 area 0 network 177.2.12.0 0.0.0.255 area 0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/2/0:23 translation-profile incoming INC ! ! mgcp fax t38 ecm ! ! dial-peer voice 1 pots incoming
Re: [OSL | CCIE_Voice] (no subject)
check also did the mva was enable for the user under end user page. On Sat, Aug 27, 2011 at 1:00 AM, Mini Me cciev.min...@gmail.com wrote: Did you enable it in Service Parameters? HTH From: Ray jonha...@yahoo.com Reply-To: Ray jonha...@yahoo.com Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT) To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0 ! ! ! router ospf 1 log-adjacency-changes network 18.1.1.1 0.0.0.0 area 0 network 177.0.101.0 0.0.0.255 area 0 network 177.2.11.0 0.0.0.255 area 0 network 177.2.12.0 0.0.0.255 area 0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/2/0:23 translation-profile incoming INC ! ! mgcp fax t38 ecm
Re: [OSL | CCIE_Voice] (no subject)
Also make sure under Remote Destination Configuration that you [/] the line associating box. I just went through this and that was my issue. EJ From: Alex Goh ncsalex@gmail.com To: Mini Me cciev.min...@gmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Saturday, August 27, 2011 8:50 PM Subject: Re: [OSL | CCIE_Voice] (no subject) check also did the mva was enable for the user under end user page. On Sat, Aug 27, 2011 at 1:00 AM, Mini Me cciev.min...@gmail.com wrote: Did you enable it in Service Parameters? HTH From: Ray jonha...@yahoo.com Reply-To: Ray jonha...@yahoo.com Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT) To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0
[OSL | CCIE_Voice] (no subject)
when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me dial any extension.. help SB#sho run Building configuration... Current configuration : 5001 bytes ! ! Last configuration change at 05:10:01 CST Fri Aug 26 2011 ! NVRAM config last updated at 23:36:37 CST Mon Aug 22 2011 ! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR1 ! boot-start-marker boot-end-marker ! ! no aaa new-model ! ! ! clock timezone CST -6 clock summer-time CST recurring network-clock-participate wic 2 ! dot11 syslog ip source-route ! ! ip cef ! ip dhcp pool phone network 177.2.11.0 255.255.255.0 default-router 177.2.11.1 option 150 ip 10.11.11.19 ! ! no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! isdn switch-type primary-ni ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g729r8 ! voice class h323 1 h225 timeout tcp establish 3 call start slow ! ! ! voice translation-rule 1 rule 1 // // type any unknown plan any isdn ! voice translation-rule 2 rule 1 // // type any subscriber plan any isdn ! voice translation-rule 3 rule 1 // // type any national plan any isdn ! voice translation-rule 4 rule 1 // // type any international plan any isdn ! voice translation-rule 5 rule 1 /.*\(3...\)/ /\1/ ! voice translation-rule 11 rule 1 /^3...$/ /972303/ type any unknown plan any isdn ! voice translation-rule 12 rule 1 /^3...$/ /303/ type any subscriber plan any isdn ! voice translation-rule 13 rule 1 /^3...$/ /972303/ type any national plan any isdn ! voice translation-rule 14 rule 1 /^3...$/ /+1972303/ type any international plan any isdn rule 2 /^4...$/ /+8522404/ type any international plan any isdn ! ! voice translation-profile 911 translate calling 11 translate called 1 ! voice translation-profile INC translate called 5 ! voice translation-profile intl translate calling 14 translate called 4 ! voice translation-profile local translate calling 12 translate called 2 ! voice translation-profile nat translate calling 13 translate called 3 ! ! voice-card 0 ! ! application service mva http://10.11.11.19:8080/ccmivr/pages/IVRMainpage.vxml ! ! ! ! ! ! license udi pid CISCO2811 sn FTX0902D1ZG ! redundancy ! ! controller T1 0/2/0 pri-group timeslots 1-4,24 ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 18.1.1.1 255.255.255.0 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip bind srcaddr 18.1.1.1 ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! ! interface FastEthernet0/1/0 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/1 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/2 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface FastEthernet0/1/3 switchport trunk native vlan 12 switchport mode trunk switchport voice vlan 11 spanning-tree portfast ! ! interface Serial0/0/0 no ip address encapsulation frame-relay no frame-relay inverse-arp ! ! interface Serial0/0/0.101 point-to-point ip address 177.0.101.2 255.255.255.0 frame-relay interface-dlci 602 ! interface Serial0/0/1 no ip address shutdown clock rate 200 ! ! interface Serial0/2/0:23 no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn outgoing ie facility isdn outgoing display-ie no cdp enable ! ! interface Vlan1 no ip address ! ! interface Vlan11 ip address 177.2.11.1 255.255.255.0 ip helper-address 10.11.11.19 ! ! interface Vlan12 ip address 177.2.12.1 255.255.255.0 ! ! ! router ospf 1 log-adjacency-changes network 18.1.1.1 0.0.0.0 area 0 network 177.0.101.0 0.0.0.255 area 0 network 177.2.11.0 0.0.0.255 area 0 network 177.2.12.0 0.0.0.255 area 0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ! ! ! ! ! control-plane ! ! ! voice-port 0/2/0:23 translation-profile incoming INC ! ! mgcp fax t38 ecm ! ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! dial-peer voice 19 voip destination-pattern 3...$ session target ipv4:10.11.11.19 voice-class codec 1 dtmf-relay h245-alphanumeric ! dial-peer voice 912 pots translation-profile outgoing local
Re: [OSL | CCIE_Voice] (no subject)
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No est? permitida su divulgaci?n y/o reproducci?n sin autorizaci?n. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
If the phone is added as SCCP in but is running SIP firmware that can cause the problem, also make sure you have a non-secure profile set on the phone too. On Jun 19, 2011, at 11:49 AM, Santiago Figueroa wrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
db replication problems? On Sun, Jun 19, 2011 at 4:49 PM, Santiago Figueroa sfigue...@mnet.com.mxwrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. ** ** Thanks. ** ** ** ** -- La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Do you know if is possible to change the parameters of tftp from http://x.x.x.x(ipphone)http://x.x.x.x(ipphone)/ ?If for example I change the tftp but ip phone do not take change from dhcp? Thanks. De: Joe Martini [mailto:joem...@cisco.com] Enviado el: Domingo, 19 de Junio de 2011 12:20 p.m. Para: Santiago Figueroa CC: ccie_voice@onlinestudylist.com Asunto: Re: [OSL | CCIE_Voice] (no subject) If the phone is added as SCCP in but is running SIP firmware that can cause the problem, also make sure you have a non-secure profile set on the phone too. On Jun 19, 2011, at 11:49 AM, Santiago Figueroa wrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
just make sure that the phone model is *7941 *or *7941G*.. check, try and update :) On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa sfigue...@mnet.com.mxwrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. ** ** Thanks. ** ** ** ** -- La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
the problem already solved it, erase the telephone and again I gave it of high De: shabeeb mohammed [mailto:shabeebc...@gmail.com] Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m. Para: Santiago Figueroa CC: ccie_voice@onlinestudylist.com Asunto: Re: [OSL | CCIE_Voice] (no subject) just make sure that the phone model is 7941 or 7941G.. check, try and update :) On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa sfigue...@mnet.com.mxmailto:sfigue...@mnet.com.mx wrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Santiago, This is a question I would expect from an end user; not someone who's preparing for the CCIE Lab. Please do your homework; get detailed sdi/sdl traces, app logs, packet captures and if those don't give you the answer; forward them to me and I'll take a look at them. Please don't take it personal, we've all went thru basic configuration issues when we started but let's just try to keep the distribution list at expert level as much as possible. Perhaps if you ask for help telling us what you have done; you wouldn't receive an answer like mine. Finally, from my experience; look at the back of the IP phone and make sure you are adding the correct phone model in CUCM. An App log will easily show you this mismatch if that were the case. Regards, Roger Carpio. On Sun, Jun 19, 2011 at 10:49 AM, Santiago Figueroa sfigue...@mnet.com.mxwrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. ** ** Thanks. ** ** ** ** -- La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
it could be a replication problem if it says reject reset the phone quite a few times and it will register eventually 2011/6/19 Santiago Figueroa sfigue...@mnet.com.mx Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. ** ** Thanks. ** ** ** ** -- La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
If it is a G phone, you will need to select 7941G-GE from the list. RP On Jun 19, 2011, at 11:52 AM, Santiago Figueroa sfigue...@mnet.com.mxmailto:sfigue...@mnet.com.mx wrote: I already add the cucm as that image001.jpg Model is from http://x.x.x.x/ http://x.x.x.x Model Number CP-7941G My ip phone in cucm image002.jpg Thanks. De: shabeeb mohammed [mailto:shabeebc...@gmail.com] Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m. Para: Santiago Figueroa CC: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Asunto: Re: [OSL | CCIE_Voice] (no subject) just make sure that the phone model is 7941 or 7941G.. check, try and update :) On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa mailto:sfigue...@mnet.com.mxsfigue...@mnet.com.mxmailto:sfigue...@mnet.com.mx wrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.com www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.com www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by PC Mall, Inc. Furthermore, PC Mall, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
Why can't you do auto register? Then you don't need to worryabout which model. Rc Sent from my iPhone On Jun 19, 2011, at 10:34 AM, Santiago Figueroa sfigue...@mnet.com.mx wrote: I already add the cucm as that image001.jpg Model is from http://x.x.x.x Model Number CP-7941G My ip phone in cucm image002.jpg Thanks. De: shabeeb mohammed [mailto:shabeebc...@gmail.com] Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m. Para: Santiago Figueroa CC: ccie_voice@onlinestudylist.com Asunto: Re: [OSL | CCIE_Voice] (no subject) just make sure that the phone model is 7941 or 7941G.. check, try and update :) On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa sfigue...@mnet.com.mx wrote: Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm the status reject, I am sure the MAC and phone type in the cucm is add correctly. Thanks. La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com La información incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO EXCLUSIVO de sus destinatarios. No está permitida su divulgación y/o reproducción sin autorización. Si ha recibido este mensaje y no le incumbe, le rogamos nos los comunique y proceda a su borrado. Gracias. Information included in this e-mail and attached files is CONFIDENTIAL and only for the EXCLUSIVE USE of the receivers. Circulation and/or copy without permission is not allowed. If you have received this e-mail and you are not the intended recipient, please let us know and erase the message and attached files. Thank you. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
http://infoj.org/indexz36X.php ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] (no subject)
http://classic-clay.com/indexz35X.php ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
http://www.apartmentsindowntowndallas.com/inside.html ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] (no subject)
Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
To replicate the lab scenario you should have 3 phones at hq, 2 at sites br1/br2 and 1 pstn phone. Pstn phone can be 7960. Others should be 7965 or 7962 for most accuracy. -- On Apr 2, 2011, at 2:36, Mohamed Gazzaz mgaz...@hotmail.com wrote: Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
You can use IP Blue soft phone for some applications, especially the PSTN phone. You can use X-Lite for SIP phone and you can also share phones between sites. Be sure to get the lab version of IP blue so you can run 5 instances at once. This lets you receive calls very easily so you could take hardware phones to where your testing features from and use softphones for the other side of the call. Be advised that some features are not supported on softphones so when in doubt, test with a hardware phone. 2011/4/2 Mohamed Gazzaz mgaz...@hotmail.com Hello, Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to practice. Do I need to get 2 additional IP Phones to practice all the scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP, and SCCP to SCCP. I want each location to have 2 IP Phones (SIP and SCCP) and one phone for PSTN. . One last question, Can I skip Volume 1 5A labs and start with 5C labs? or do I have to finish 5A before moving to 5C? Thank you. Regards, Mohamed Gazzaz ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
I had the same problem, maybe 3 weeks ago. The solution was uncheck the restriction pattern * inside of RESTRICTION TABLES àDEFAULT SYSTEM TRANSFER. GREETINGS image001.png___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Under Restriction Table Default System Transfer Uncheck the Blocked checkbox for pattern * It works for me ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I already done that. Did you do it from user phone with mailbox ? It only works with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume 2 ? Any one can assist me to solve this task. Clear steps will be more accurate. Please see my problem below: Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Thanks in advance Regards, Waleed Date: Thu, 28 Oct 2010 18:43:09 +0800 From: vcc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] (no subject) Under Restriction Table Default System Transfer Uncheck the Blocked checkbox for pattern * It works for me ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi Waleed, The question says - Users hqph2 and br1ph2 (mailbox users) press the Messages button and then press # to go get opening greeting. FROM THERE they should be able to dial extensions which do not have a mailbox on unity ie 5001,1001 etc. Is that what you are trying to do ? Its not for users who dont have a mailbox I have done this and it works everytime. Thanks, DA 2010/10/28 Waleed Elhadidy walid...@hotmail.com I already done that. Did you do it from user phone with mailbox ? It only works with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume 2 ? Any one can assist me to solve this task. Clear steps will be more accurate. Please see my problem below: Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Thanks in advance Regards, Waleed -- Date: Thu, 28 Oct 2010 18:43:09 +0800 From: vcc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] (no subject) Under Restriction Table Default System Transfer Uncheck the Blocked checkbox for pattern * It works for me ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi David, Yes that is the question iam trying to answer and I know it asks users with mailbox to do the transfer during opening greeting. I can only do with users who don't have mailbox. I followed the solution guide but didn't work. If you know how, please indicate step by step to follow. I might be missing something. Thanks alot. Regards, Waleed Date: Thu, 28 Oct 2010 18:35:46 -0400 Subject: Re: [OSL | CCIE_Voice] (no subject) From: david.a...@gmail.com To: walid...@hotmail.com CC: vcc...@gmail.com; ccie_voice@onlinestudylist.com Hi Waleed, The question says - Users hqph2 and br1ph2 (mailbox users) press the Messages button and then press # to go get opening greeting. FROM THERE they should be able to dial extensions which do not have a mailbox on unity ie 5001,1001 etc. Is that what you are trying to do ? Its not for users who dont have a mailbox I have done this and it works everytime. Thanks, DA 2010/10/28 Waleed Elhadidy walid...@hotmail.com I already done that. Did you do it from user phone with mailbox ? It only works with users with no mailbox. Did anyone answer task 4.4 in lab 7 volume 2 ? Any one can assist me to solve this task. Clear steps will be more accurate. Please see my problem below: Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Thanks in advance Regards, Waleed Date: Thu, 28 Oct 2010 18:43:09 +0800 From: vcc...@gmail.com To: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] (no subject) Under Restriction Table Default System Transfer Uncheck the Blocked checkbox for pattern * It works for me ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi, Thanks for your tips. I already done the below requirements. What iam facing is when I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from. Any other ideas ? Regards, Waleed From: findko...@gmail.com Date: Wed, 27 Oct 2010 12:43:14 +0200 Subject: Re: [OSL | CCIE_Voice] (no subject) To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi Waleed, What is the pt and css you are using for the VM ports. They should be in none partition if you are doing any 4-digit internal number translations. HTH Prashant 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hi, Thanks for your tips. I already done the below requirements. What iam facing is when I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from. Any other ideas ? Regards, Waleed -- From: findko...@gmail.com Date: Wed, 27 Oct 2010 12:43:14 +0200 Subject: Re: [OSL | CCIE_Voice] (no subject) To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi Prashant, Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Any other ideas ? Regards, Waleed Date: Wed, 27 Oct 2010 08:26:17 -0400 Subject: Re: [OSL | CCIE_Voice] (no subject) From: prashantpatel...@gmail.com To: walid...@hotmail.com CC: findko...@gmail.com; ccie_voice@onlinestudylist.com Hi Waleed, What is the pt and css you are using for the VM ports. They should be in none partition if you are doing any 4-digit internal number translations. HTH Prashant 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hi, Thanks for your tips. I already done the below requirements. What iam facing is when I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from. Any other ideas ? Regards, Waleed From: findko...@gmail.com Date: Wed, 27 Oct 2010 12:43:14 +0200 Subject: Re: [OSL | CCIE_Voice] (no subject) To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I skipped pin when logging and tried pressing # then extension, but still didn't work. The phone menu of the user is what Iam transferred to after login, not opening greeting system handler. This means Iam only allowed to select options in phone menu --Touchtone Conversation--Classic Conversation. Regards, Waleed From: clmar...@bryantx.gov To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Date: Wed, 27 Oct 2010 08:33:30 -0500 Subject: RE: [OSL | CCIE_Voice] (no subject) Waleed, Do not enter your password when prompted, just press # that should transfer you to the main greeting then you can dial a number. Chris From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Waleed Elhadidy Sent: Wednesday, October 27, 2010 8:28 AM To: prashantpatel...@gmail.com Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] (no subject) Hi Prashant, Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Any other ideas ? Regards, Waleed Date: Wed, 27 Oct 2010 08:26:17 -0400 Subject: Re: [OSL | CCIE_Voice] (no subject) From: prashantpatel...@gmail.com To: walid...@hotmail.com CC: findko...@gmail.com; ccie_voice@onlinestudylist.com Hi Waleed, What is the pt and css you are using for the VM ports. They should be in none partition if you are doing any 4-digit internal number translations. HTH Prashant 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hi, Thanks for your tips. I already done the below requirements. What iam facing is when I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from. Any other ideas ? Regards, Waleed From: findko...@gmail.com Date: Wed, 27 Oct 2010 12:43:14 +0200 Subject: Re: [OSL | CCIE_Voice] (no subject) To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I just want to add something else. The only way it works is when users with no mailbox dial UC because they are transferred to opening greeting system handler, unlike users with mailboxes are transferred to user phone menu. Regards, Waleed From: walid...@hotmail.com To: clmar...@bryantx.gov CC: ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] (no subject) Date: Wed, 27 Oct 2010 16:05:30 +0200 I skipped pin when logging and tried pressing # then extension, but still didn't work. The phone menu of the user is what Iam transferred to after login, not opening greeting system handler. This means Iam only allowed to select options in phone menu --Touchtone Conversation--Classic Conversation. Regards, Waleed From: clmar...@bryantx.gov To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Date: Wed, 27 Oct 2010 08:33:30 -0500 Subject: RE: [OSL | CCIE_Voice] (no subject) Waleed, Do not enter your password when prompted, just press # that should transfer you to the main greeting then you can dial a number. Chris From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Waleed Elhadidy Sent: Wednesday, October 27, 2010 8:28 AM To: prashantpatel...@gmail.com Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] (no subject) Hi Prashant, Connection between cucm and unity connection is sip trunk. All CSSs of trunk contain partitions of phones. The issue is not with transferring. Users with no mailbox can be transferred to any number they dial during opening greeting, so problem is not with transferring. The problem is with users who have mailboxes. When I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from (eg. 1 for new messages, 2 to send messages,etc). Any other ideas ? Regards, Waleed Date: Wed, 27 Oct 2010 08:26:17 -0400 Subject: Re: [OSL | CCIE_Voice] (no subject) From: prashantpatel...@gmail.com To: walid...@hotmail.com CC: findko...@gmail.com; ccie_voice@onlinestudylist.com Hi Waleed, What is the pt and css you are using for the VM ports. They should be in none partition if you are doing any 4-digit internal number translations. HTH Prashant 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hi, Thanks for your tips. I already done the below requirements. What iam facing is when I press the message button and login, I can't dial any number during the greeting. It says invalid entry. It only allows the predefined options of the greeting to choose from. Any other ideas ? Regards, Waleed From: findko...@gmail.com Date: Wed, 27 Oct 2010 12:43:14 +0200 Subject: Re: [OSL | CCIE_Voice] (no subject) To: walid...@hotmail.com CC: ccie_voice@onlinestudylist.com Hi, you also need to adjust the default restriction table and configure proper CSS for the voicemail ports / SIP trunk (+contact line) regards kobel 2010/10/27 Waleed Elhadidy walid...@hotmail.com Hello Everyone, Iam asked to configure unity connection to allow phones with mailbox to press message button and then can be transferred to any number during opening greeting. This can be done by callers with no mailbox but not ones with mailboxes. The solution guide solves this by checking Allow Transfers to Numbers Not Associated with Users or Call Handlers in standard greeting of opening greeting system call handler. I tried this but didn't work. Any ideas ? Regrads, Waleed ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Hi, In PL WB 1 Lab 6 and onwards in the config tasks -prerequisites I see a NOTE: If you are using your own hw cisco 7961 phones instead of 7962 phones, please perform the following: first delete all 7962 phones and then run the BAT tool for phone install. We have laready preprovisioned a file that you simply need to import (and change MAC add) containing the 7961 phones types. My question is where do I find this file to import? I am not getting any response from ipexpert support team on this. Currently I just delete the 7962s and add my 7961s. Pls advise Thanks, Bhushan. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
What type of phones are you using for this scenario? the anormally you have just mentioned is what i get when using softphones for IPMA. Pithog oil ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
http://www.divittoeditore.com/und9.html ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Can anyone get to http://proctorlabs.com? I'm in the middle of my lab... and its down :-( -Chase ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I face the same for about 45 minutes On Thu, Sep 9, 2010 at 7:03 PM, chase mergenthal cm3_...@hotmail.comwrote: Can anyone get to http://proctorlabs.com? I'm in the middle of my lab... and its down :-( -Chase ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
http://ogizujyny.freecities.com/sulygupe.html ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Apologies everyone, I sent my request to the wrong email, should have been to ccie_rs-requ...@onlinestudylist.com as I want to change my subscription options. However I have felt like sending a general request for help during my studies. ;o) The good news is that I finally passed the lab, the same week as the 2 Matthew's I think, so a big thank you to everyone and stay with it those who have not crossed the line yet as it is a very satisfying place to be. I have not really been a major contributor to this this list but used it more for reference as I concentrated on other sources for my study and preperation. I have had a family break since passing and look forward to spending more time with them now. Thanks Trevor Peddle CCIE #26723 (Voice) From: Amp amccar...@cciequest.com To: Sam Park upperlevelpark...@gmail.com Cc: ccie_voice@onlinestudylist.com Sent: Thu, 2 September, 2010 2:32:30 Subject: Re: [OSL | CCIE_Voice] (no subject) I think I'm going to go to the doctor and just yell, Ouch!. Hahaha naa all joking aside, I know what you mean. Quoting Sam Park upperlevelpark...@gmail.com: This is like one of those instances when a person's mind is so fried that only the basic primal pleas escape from a person's lips. In this case, through the keyboard and into an e-mail. Sam Park On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror rearviewmir...@gmail.comwrote: Help.. pretty much sums up my whole lab preparation. On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi vma...@ipexpert.com wrote: Can you be a little bit more specific detailing the problem? Thanks:-) -- Vik Malhi ? CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Trevor Peddle trevor...@yahoo.co.uk *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT) *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] (no subject) help -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Can you be a little bit more specific detailing the problem? Thanks:-) -- Vik Malhi CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat http://www.ipexpert.com/chat IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities http://www.ipexpert.com/communities and our public website at www.ipexpert.com http://www.ipexpert.com/ From: Trevor Peddle trevor...@yahoo.co.uk Date: Wed, 1 Sep 2010 21:28:10 + (GMT) To: OSL Group ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I think I'm going to go to the doctor and just yell, Ouch!. Hahaha naa all joking aside, I know what you mean. Quoting Sam Park upperlevelpark...@gmail.com: This is like one of those instances when a person's mind is so fried that only the basic primal pleas escape from a person's lips. In this case, through the keyboard and into an e-mail. Sam Park On Wed, Sep 1, 2010 at 6:00 PM, rearviewmirror rearviewmir...@gmail.comwrote: Help.. pretty much sums up my whole lab preparation. On Thu, Sep 2, 2010 at 7:44 AM, Vik Malhi vma...@ipexpert.com wrote: Can you be a little bit more specific detailing the problem? Thanks:-) -- Vik Malhi ? CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: *vma...@ipexpert.com *Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/chat * http://www.ipexpert.com/chat* IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (RS, Voice, Security Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities *http://www.ipexpert.com/communities* and our public website at www.ipexpert.com *http://www.ipexpert.com/* -- *From: *Trevor Peddle trevor...@yahoo.co.uk *Date: *Wed, 1 Sep 2010 21:28:10 + (GMT) *To: *OSL Group ccie_voice@onlinestudylist.com *Subject: *[OSL | CCIE_Voice] (no subject) help -- ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Dear Friends I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting and and press **# to unlock phone setting, It do unlocl phone setting but when I go to IP Address section, The Edit Soft key appears but it is disabled. Any Idea how edit IP address in this scnario?? plz... Best Regards Asif _ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Go to DHCP settings and make it Manual First. From: asif raza [mailto:asifraz...@hotmail.com] Sent: Friday, April 02, 2010 9:18 AM To: CCIE-Voice Subject: [OSL | CCIE_Voice] (no subject) Dear Friends I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting and and press **# to unlock phone setting, It do unlocl phone setting but when I go to IP Address section, The Edit Soft key appears but it is disabled. Any Idea how edit IP address in this scnario?? plz... Best Regards Asif _ The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get started. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON: WL:en-US:WM_HMP:042010_3 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject) IP address Edit On IP Phone.
U mean DHCP Server Option on IP Phone Setting?? Best Regards Asif Raza From: esa...@sigma-it.net To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] (no subject) Date: Fri, 2 Apr 2010 10:36:16 +0200 Go to DHCP settings and make it Manual First. From: asif raza [mailto:asifraz...@hotmail.com] Sent: Friday, April 02, 2010 9:18 AM To: CCIE-Voice Subject: [OSL | CCIE_Voice] (no subject) Dear Friends I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting and and press **# to unlock phone setting, It do unlocl phone setting but when I go to IP Address section, The Edit Soft key appears but it is disabled. Any Idea how edit IP address in this scnario?? plz... Best Regards Asif The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get started. _ The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multicalendarocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject) IP address Edit On IP Phone.
Go to DHCP option on the phone, press **#** and then disable it first as it is enabled by default and won't allow you to change settings of TFTP or IP. Ash On 02/04/2010 11:14, asif raza wrote: U mean DHCP Server Option on IP Phone Setting?? Best Regards ** *Asif Raza * From: esa...@sigma-it.net To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] (no subject) Date: Fri, 2 Apr 2010 10:36:16 +0200 Go to DHCP settings and make it Manual First. *From:* asif raza [mailto:asifraz...@hotmail.com] *Sent:* Friday, April 02, 2010 9:18 AM *To:* CCIE-Voice *Subject:* [OSL | CCIE_Voice] (no subject) Dear Friends I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting and and press **# to unlock phone setting, It do unlocl phone setting but when I go to IP Address section, The Edit Soft key appears but it is disabled. Any Idea how edit IP address in this scnario?? plz... Best Regards *Asif* The New Busy is not the old busy. Search, chat and e-mail from your inbox. Get started. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3 The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with Hotmail. Get busy. http://www.windowslive.com/campaign/thenewbusy?tile=multicalendarocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Thanks, Ashar Siddiqui ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Also worth taking a look at http://ciscounitytools.com/index.html the port status monitor there is pretty good - as are most of the other tools Ryan Schwab schwab...@shaw.ca Regards Graham Hopkins On 19 Mar 2010, at 04:49, Ryan Schwab wrote: Hi Jean, Yes, the RTMT is definitely what you need. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M. Thewissen Sent: March-18-10 10:07 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Anyone can point me to the best way to monitor unity connection ports? I need to see info like dnis, rdnis and the like when a call comes in. Is RTMT the right tool for this? Thx! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Mike, are you sure ? See http://ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html I have this running with UC Regards Graham Hopkins On 19 Mar 2010, at 11:07, Mike Thompson wrote: He's talking about UC and not Unity. There's no port status monitor in UC which is REAL disappointing. Sent from my phone, apologies for any typos. On Mar 19, 2010, at 6:37 AM, Graham Hopkins ghopk...@wolf-rock.co.uk wrote: Also worth taking a look at http://ciscounitytools.com/index.html the port status monitor there is pretty good - as are most of the other tools Ryan Schwab schwab...@shaw.ca Regards Graham Hopkins On 19 Mar 2010, at 04:49, Ryan Schwab wrote: Hi Jean, Yes, the RTMT is definitely what you need. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M. Thewissen Sent: March-18-10 10:07 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Anyone can point me to the best way to monitor unity connection ports? I need to see info like dnis, rdnis and the like when a call comes in. Is RTMT the right tool for this? Thx! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
well apparently I'm not sure :) if they have something like call viewer, I'll be like a kid in a candy shop. On Mar 19, 2010 7:36am, Graham Hopkins ghopk...@wolf-rock.co.uk wrote: Mike, are you sure ? See http://ciscounitytools.com/Applications/CxN/PortStatusMonitorCUC7x/PortStatusMonitorCUC7x.html I have this running with UC Regards Graham Hopkins On 19 Mar 2010, at 11:07, Mike Thompson wrote: He's talking about UC and not Unity. There's no port status monitor in UC which is REAL disappointing. Sent from my phone, apologies for any typos. On Mar 19, 2010, at 6:37 AM, Graham Hopkins ghopk...@wolf-rock.co.uk wrote: Also worth taking a look at http://ciscounitytools.com/index.html the port status monitor there is pretty good - as are most of the other tools Ryan Schwab schwab...@shaw.ca Regards Graham Hopkins On 19 Mar 2010, at 04:49, Ryan Schwab wrote: Hi Jean, Yes, the RTMT is definitely what you need. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M. Thewissen Sent: March-18-10 10:07 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Anyone can point me to the best way to monitor unity connection ports? I need to see info like dnis, rdnis and the like when a call comes in. Is RTMT the right tool for this? Thx! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Anyone can point me to the best way to monitor unity connection ports? I need to see info like dnis, rdnis and the like when a call comes in. Is RTMT the right tool for this? Thx! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi Jean, Yes, the RTMT is definitely what you need. -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M. Thewissen Sent: March-18-10 10:07 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Anyone can point me to the best way to monitor unity connection ports? I need to see info like dnis, rdnis and the like when a call comes in. Is RTMT the right tool for this? Thx! ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
I am up on pod 14 and things are ok. Try just reloading the turning on and off the equipment that won't load for you. Also on of the Volume 2 labs was mislabaled. Try loading the Final config and see what results you get. Jefferson ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara _ Tell us your greatest, weirdest and funniest Hotmail stories http://clk.atdmt.com/UKM/go/195013117/direct/01/___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
just simply stop ccm service. On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara -- We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
You can use acl to test SRST. Regards, Aman On Thu, Feb 11, 2010 at 8:26 AM, Arun Kumar arunv...@gmail.com wrote: just simply stop ccm service. On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara nishi...@hotmail.comwrote: Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara -- We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now http://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
You can put in two host routes that points the traffic destinated to the UCM servers to dev null. That would also make the phones to fall over to SRST. Like this ip route 10.10.210.10 255.255.255.255 null0 ip route 10.10.210.11 255.255.255.255 null0 Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Nish Tarpara [nishi...@hotmail.com] Skickat: den 11 februari 2010 12:59 Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: Re: [OSL | CCIE_Voice] (no subject) Hi, Just wanted to confirm with my last email that on my last session, i did tried to use Simulate SRST WAN Failure link but i was't able to test SRST properly, I will try to check it again today. Regards, Nish Tarpara From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 11 Feb 2010 10:46:39 + Subject: [OSL | CCIE_Voice] (no subject) Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ Do you have a story that started on Hotmail? Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Will this place the gateway in fallback? I am assuming if the gateway is registered as any interface other than the WAN interface? Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB0C.AE6348E0]http://www.netelligent.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg Sent: Thursday, February 11, 2010 11:03 AM To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] (no subject) You can put in two host routes that points the traffic destinated to the UCM servers to dev null. That would also make the phones to fall over to SRST. Like this ip route 10.10.210.10 255.255.255.255 null0 ip route 10.10.210.11 255.255.255.255 null0 Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Nish Tarpara [nishi...@hotmail.com] Skickat: den 11 februari 2010 12:59 Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: Re: [OSL | CCIE_Voice] (no subject) Hi, Just wanted to confirm with my last email that on my last session, i did tried to use Simulate SRST WAN Failure link but i was't able to test SRST properly, I will try to check it again today. Regards, Nish Tarpara From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 11 Feb 2010 10:46:39 + Subject: [OSL | CCIE_Voice] (no subject) Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ Do you have a story that started on Hotmail? Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ This transmission and any attached files are privileged, confidential or otherwise the exclusive property of the intended recipient or Netelligent Corporation. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please contact us immediately by responding to this message or by telephone (314-392-6900) and promptly destroy the original transmission and its attachments. inline: image001.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
That's the way that I usually do it anyway, for example I did it last week for a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST functionality. I was sitting at home, helped them out during a study break. It's actually the phones that fails over, not the VGW. It has no idée of SRST or not. If it is a MGCP VGW then it will of course be aware of that it has lost the connection to the UCM, but it will still not have any clue of SRST. It's the phones that notice that they have lost the connection to first the primary UCM, then secondary, then tertiary then finally it will fail over to the SRST reference. Brgds, Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Mark Nigh [mn...@netelligent.com] Skickat: den 11 februari 2010 18:23 Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: RE: [OSL | CCIE_Voice] (no subject) Will this place the gateway in fallback? I am assuming if the gateway is registered as any interface other than the WAN interface? Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB0C.AE6348E0]http://www.netelligent.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg Sent: Thursday, February 11, 2010 11:03 AM To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] (no subject) You can put in two host routes that points the traffic destinated to the UCM servers to dev null. That would also make the phones to fall over to SRST. Like this ip route 10.10.210.10 255.255.255.255 null0 ip route 10.10.210.11 255.255.255.255 null0 Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Nish Tarpara [nishi...@hotmail.com] Skickat: den 11 februari 2010 12:59 Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: Re: [OSL | CCIE_Voice] (no subject) Hi, Just wanted to confirm with my last email that on my last session, i did tried to use Simulate SRST WAN Failure link but i was't able to test SRST properly, I will try to check it again today. Regards, Nish Tarpara From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 11 Feb 2010 10:46:39 + Subject: [OSL | CCIE_Voice] (no subject) Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ Do you have a story that started on Hotmail? Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ This transmission and any attached files are privileged, confidential or otherwise the exclusive property of the intended recipient or Netelligent Corporation. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please contact us immediately by responding to this message or by telephone (314-392-6900) and promptly destroy the original transmission and its attachments. inline: image001.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Good idea. One gotcha, if you are redistributing static routes, you can actually take down all remote locations as this route will advertise out to all locations. This happen to me once, ouch. With MGCP, the gateway will need to go into SRST to test outbound calls or the phones will fallback but outbound and inbound calls will not. Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB14.E76B6070]http://www.netelligent.com/ From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Thursday, February 11, 2010 12:20 PM To: Mark Nigh; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: SV: [OSL | CCIE_Voice] (no subject) That's the way that I usually do it anyway, for example I did it last week for a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST functionality. I was sitting at home, helped them out during a study break. It's actually the phones that fails over, not the VGW. It has no idée of SRST or not. If it is a MGCP VGW then it will of course be aware of that it has lost the connection to the UCM, but it will still not have any clue of SRST. It's the phones that notice that they have lost the connection to first the primary UCM, then secondary, then tertiary then finally it will fail over to the SRST reference. Brgds, Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Mark Nigh [mn...@netelligent.com] Skickat: den 11 februari 2010 18:23 Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: RE: [OSL | CCIE_Voice] (no subject) Will this place the gateway in fallback? I am assuming if the gateway is registered as any interface other than the WAN interface? Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB14.E76B6070]http://www.netelligent.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg Sent: Thursday, February 11, 2010 11:03 AM To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] (no subject) You can put in two host routes that points the traffic destinated to the UCM servers to dev null. That would also make the phones to fall over to SRST. Like this ip route 10.10.210.10 255.255.255.255 null0 ip route 10.10.210.11 255.255.255.255 null0 Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Nish Tarpara [nishi...@hotmail.com] Skickat: den 11 februari 2010 12:59 Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: Re: [OSL | CCIE_Voice] (no subject) Hi, Just wanted to confirm with my last email that on my last session, i did tried to use Simulate SRST WAN Failure link but i was't able to test SRST properly, I will try to check it again today. Regards, Nish Tarpara From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 11 Feb 2010 10:46:39 + Subject: [OSL | CCIE_Voice] (no subject) Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ Do you have a story that started on Hotmail? Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ This transmission and any attached files are privileged, confidential or otherwise the exclusive property of the intended recipient or Netelligent Corporation. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please contact us immediately by responding to this message or by telephone (314-392-6900) and promptly destroy the original transmission and its attachments. This transmission and any attached files are privileged, confidential or otherwise the exclusive property of the intended recipient or Netelligent Corporation. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited. If you have received this transmission in error, please contact us immediately by responding to this message or by telephone (314-392-6900) and promptly destroy the original transmission and its attachments. inline: image001
Re: [OSL | CCIE_Voice] (no subject)
Right, redistribution can wreck havoc in you network if not carefully considered. :-) Your right about that MGCP needs to lose connection to all UCM's, but that will be taken care of if you put the routes to dev null on your egress gw, ie the last hop for the network were the VGW reside. Or on the remote sites last hop before leaving the LAN and entering the WAN. That is if you have the control of that box, if not this could be hard to achieve. Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Mark Nigh [mn...@netelligent.com] Skickat: den 11 februari 2010 19:22 Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: RE: [OSL | CCIE_Voice] (no subject) Good idea. One gotcha, if you are redistributing static routes, you can actually take down all remote locations as this route will advertise out to all locations. This happen to me once, ouch. With MGCP, the gateway will need to go into SRST to test outbound calls or the phones will fallback but outbound and inbound calls will not. Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB14.E76B6070]http://www.netelligent.com/ From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Thursday, February 11, 2010 12:20 PM To: Mark Nigh; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: SV: [OSL | CCIE_Voice] (no subject) That's the way that I usually do it anyway, for example I did it last week for a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST functionality. I was sitting at home, helped them out during a study break. It's actually the phones that fails over, not the VGW. It has no idée of SRST or not. If it is a MGCP VGW then it will of course be aware of that it has lost the connection to the UCM, but it will still not have any clue of SRST. It's the phones that notice that they have lost the connection to first the primary UCM, then secondary, then tertiary then finally it will fail over to the SRST reference. Brgds, Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Mark Nigh [mn...@netelligent.com] Skickat: den 11 februari 2010 18:23 Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: RE: [OSL | CCIE_Voice] (no subject) Will this place the gateway in fallback? I am assuming if the gateway is registered as any interface other than the WAN interface? Mark Nigh Systems Engineer mn...@netelligent.com (p) 314.392.6926 [cid:image001.gif@01CAAB14.E76B6070]http://www.netelligent.com/ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg Sent: Thursday, February 11, 2010 11:03 AM To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] (no subject) You can put in two host routes that points the traffic destinated to the UCM servers to dev null. That would also make the phones to fall over to SRST. Like this ip route 10.10.210.10 255.255.255.255 null0 ip route 10.10.210.11 255.255.255.255 null0 Roger Källberg Consultant Cygate AB Eric Perssons väg 21, SE-217 62 MALMÖ Direkt: +46108787498 Växel: +46108787400 roger.kallb...@cygate.semailto:roger.kallb...@cygate.se Från: Nish Tarpara [nishi...@hotmail.com] Skickat: den 11 februari 2010 12:59 Till: ccie_voice@onlinestudylist.com; dle...@ipexpert.com Ämne: Re: [OSL | CCIE_Voice] (no subject) Hi, Just wanted to confirm with my last email that on my last session, i did tried to use Simulate SRST WAN Failure link but i was't able to test SRST properly, I will try to check it again today. Regards, Nish Tarpara From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com Date: Thu, 11 Feb 2010 10:46:39 + Subject: [OSL | CCIE_Voice] (no subject) Hi, With regards to SRST teting on remote lab, please advice me how to test it by remote ip phones connected via Ezvpn. Regards, Nish Tarpara We want to hear all your funny, exciting and crazy Hotmail stories. Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ Do you have a story that started on Hotmail? Tell us nowhttp://clk.atdmt.com/UKM/go/195013117/direct/01/ This transmission and any attached files are privileged, confidential or otherwise the exclusive property of the intended recipient or Netelligent Corporation. If you are not the intended recipient, any disclosure, copying, distribution or use of any of the information contained in or attached
[OSL | CCIE_Voice] (no subject)
Phil, Good morning. I would look at the settings in UCM on the line on the device. All the way at the bottom there are some check boxes for called, Calling and redirected number. Then once the call gets to Unity use the Port Viewer (??) in RTMT to see what Unity is seeing. From there you can set up call routing rules in Unity to match and send the call where you want. That is what I have done in the past. Just some thoughts. Hope that helps. Others from the group will probably chime in also. Jefferson ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
--- Amy Ryan -- CCIE #24677 Senior Technical Instructor - IPexpert, Inc. Mailto: mailto:ar...@ipexpert.com ar...@ipexpert.com Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Live Assistance, Please visit: http://www.ipexpert.com/chat www.ipexpert.com/chat IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (RS, Voice Security), CCNP, CCVP, CCSP and CCIE (RS, Voice, Security Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at http://www.ipexpert.com/communities www.ipexpert.com/communities and our public website at http://www.ipexpert.com www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Hi Kevin Thanks for your info. It seems that we will have enough time to complete V3 lab compared to V2 if OEQ is not a big problem cheers, Jerry From: Kevin Damisch Sent: Wednesday, October 28, 2009 4:56 PM To: Jerry Bai ; ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] (no subject) Jerry, here's the scoop on OEQs: The total lab is 100 points, you need 80 to pass. The OEQ section is 21 points and contains 4 questions. If you get 3 or 4 questions correct, you will get 21 points for that section. If you get 0, 1, or 2 questions correct, then you get 0 points for that section. So, if you miss 2 of the OEQs, then you will fail the entire lab. Here's why..Even if you get every single detail correct on the lab portion, you would only get 79 points from the various lab sections and 0 from the OEQs. 79 is not enough to pass. You get 30 minutes for the OEQs, but if you finish them early, you can start immediately on the lab. Even if you think you missed 2 or more questions, you must forget about it for the rest of the day and focus solely on the lab because one the OEQs are done and you start the lab, you can't go back the them and you need all of your concentration on the remaining lab sections. Thanks, Kevin From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jerry Bai Sent: Wednesday, October 28, 2009 12:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Dear Folks, I have questions on Open End Questions for CCIE Voice. I know cisco introduce 30 mins core knowledge questions before lab. Will 4 OEQ questions be scored and carry to your total lab points? Cheers Jerry This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document. Emoticon1.gif___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
OEQ = 21 points Lab = 79 points 2 out 4 correct = 0 points 3 or 4/4 correct = 21 points. bottomline, you cannot pass the lab unless you answer at least 3 out of 4 questions correctly, since passing score is 80. HTH Jerry Bai wrote: Dear Folks, I have questions on Open End Questions for CCIE Voice. I know cisco introduce 30 mins core knowledge questions before lab. Will 4 OEQ questions be scored and carry to your total lab points? Cheers Jerry ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Dear Folks, I have questions on Open End Questions for CCIE Voice. I know cisco introduce 30 mins core knowledge questions before lab. Will 4 OEQ questions be scored and carry to your total lab points? Cheers Jerry ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
Jerry, here's the scoop on OEQs: The total lab is 100 points, you need 80 to pass. The OEQ section is 21 points and contains 4 questions. If you get 3 or 4 questions correct, you will get 21 points for that section. If you get 0, 1, or 2 questions correct, then you get 0 points for that section. So, if you miss 2 of the OEQs, then you will fail the entire lab. Here's whyEven if you get every single detail correct on the lab portion, you would only get 79 points from the various lab sections and 0 from the OEQs. 79 is not enough to pass. You get 30 minutes for the OEQs, but if you finish them early, you can start immediately on the lab. Even if you think you missed 2 or more questions, you must forget about it for the rest of the day and focus solely on the lab because one the OEQs are done and you start the lab, you can't go back the them and you need all of your concentration on the remaining lab sections. Thanks, Kevin From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jerry Bai Sent: Wednesday, October 28, 2009 12:29 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] (no subject) Dear Folks, I have questions on Open End Questions for CCIE Voice. I know cisco introduce 30 mins core knowledge questions before lab. Will 4 OEQ questions be scored and carry to your total lab points? Cheers Jerry This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
Hi Folkas! I need some clarifications on the Voice written exm. 1) Any change in the Voice written exam 2) UCM which version we have to foucus on ? [ For SRND] ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] (no subject)
I just retook the test a few weeks ago as it had been nearly three years since I passed it the first time. It's basically a cross sampling of everything required for the ccvp. In terms of knowledge base it is closer to a v2 lab than v3. It still has alot of the older technolgies on there. I think that is because some of the books in the reading list have yet to be updated. Chris Sent from my iPhone On Aug 1, 2009, at 5:11 AM, gpsnwe gpsvoiceexpe...@yahoo.com wrote: Hi Folkas! I need some clarifications on the Voice written exm. 1) Any change in the Voice written exam 2) UCM which version we have to foucus on ? [ For SRND] ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
wmcallis...@vccs.edu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] (no subject)
How srst license differ from ccme license ? how to upgade the srst licese to ccme llicense or vice-versa ? Thanks to all
[OSL | CCIE_Voice] (no subject)
[cid:image001.jpg@01C9AD5C.BCF24400] [cid:image002.gif@01C9AD5C.BCF24400] With best regards, inline: image001.jpginline: image002.gif
[OSL | CCIE_Voice] (no subject)
Hi guys, Is there anyone can help me? I am wondering which Cisco Unity Express version I need to use for prepare the voice lab? Thanks. Jeffrey
Re: [OSL | CCIE_Voice] (no subject)
Its 2.3.4 for version 2 - Basant On Sun, Mar 1, 2009 at 8:08 AM, jeffrey liujian jeffrey_liuj...@yahoo.comwrote: Hi guys, Is there anyone can help me? I am wondering which Cisco Unity Express version I need to use for prepare the voice lab? Thanks. Jeffrey
Re: [OSL | CCIE_Voice] (no subject)
Re: post by: Ryan Hicks *** I am not trying to achieve any thing special or from a directed question. I set up CM as normal, notice that I cannot dial anything. Look at the pull replication and notice the subscription is not present. I reestablish it. Give it about ten minutes to re-sync. Reboot the SUB, then the PUB. And I still cnot dial anything. Even when devices are in the null partition with no CSSs assigned. ? So, if I build any particular lab out, and tis happens, nothing works. ** If you were talking about CCM DB replication issue, then I think I will follow these steps: -- Ensure Subscriber srv up, SQL DB is running -- Ensure Pub DB up running -- In Pub, open 'SQL Enterprise Manager' - Look for -- a. Which Database instance used by default, for example: 'ccm0301' -- b. Inside this DB instance, verify if you can see 'subscription name' with proper ccmname/type/status. for instance: Subscription name: CCM2-PM03-MKM Type: Pull Status: Active Subscriber: CCM2-PM03-MKM SubscriptionDB: CCM0301 From Pub srv, ping 'ccm2-pm03-mkm' sub, it should pingable, if not local hostname need to add it -- In Sub, do similar thing. Also verify Pub is pingable from Sub. BTW, if your replica to sub failed, your pub should still up and be able to handle calls. How come you cannot dial anything? Please let me know if you are aware of something else. James From: ccie_voice-requ...@onlinestudylist.com Subject: CCIE_Voice Digest, Vol 35, Issue 1 To: ccie_voice@onlinestudylist.com Date: Thu, 1 Jan 2009 09:53:34 -0500 Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: IPCC Agent Logged In But Not in Ready State (Alex) 2. Re: CCIE_Voice Digest, Vol 34, Issue 105 (Ryan Hicks) -- Message: 1 Date: Thu, 1 Jan 2009 09:32:57 - From: Alex alex.arsen...@gmail.com Subject: Re: [OSL | CCIE_Voice] IPCC Agent Logged In But Not in Ready State To: kamal yousaf lovingprin...@gmail.com, ccie_voice@onlinestudylist.com Message-ID: db9a0601e14d4d60b36e4d04125b4...@jnpr.net Content-Type: text/plain; charset=iso-8859-1 I found this symptom shows up when phone IP address is not reachable from IPCC and vice versa. If the phone is behind NAT, the IPCC tries to communicate to the real phone IP, not NATed IP and therefore HTTP request from the phone is not answered. Example: real phone IP == 192.168.0.65 NATed phone IP == 10.1.1.1 IPCC IP@ == 10.1.200.21 IPCC tries to communicate to 192.168.0.65, not to 10.1.1.1 = phone receives no response to its HTTP request. Rgds Alex - Original Message - From: kamal yousaf To: ccie_voice@onlinestudylist.com Sent: Thursday, January 01, 2009 12:02 AM Subject: [OSL | CCIE_Voice] IPCC Agent Logged In But Not in Ready State Hi, When i use IPCC Agent login using IP Phone Services, it logs me in successfully and Screen shows Not Ready. When i hit update to enter into Ready state,it throws error saying host not found. I have double-checked all service parameters in CCM and they are pointing to right IP address.Can you help me what might be cause of this problem ? Thanks. -- next part -- An HTML attachment was scrubbed... URL: http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090101/c2067670/attachment-0001.htm -- Message: 2 Date: Thu, 1 Jan 2009 06:45:25 -0800 (PST) From: Ryan Hicks ryanhicks0...@yahoo.com Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 34, Issue 105 To: ccie_voice@onlinestudylist.com, Jianhong Fang mo...@hotmail.com Message-ID: 284086.981...@web55205.mail.re4.yahoo.com Content-Type: text/plain; charset=iso-8859-1 I am not trying to achieve any thing special or from a directed question. I set up CM as normal, notice that I cannot dial anything. Look at the pull replication and notice the subscription is not present. I reestablish it. Give it about ten minutes to re-sync. Reboot the SUB, then the PUB. And I still cnot dial anything. Even when devices are in the null partition with no CSSs assigned. ? So, if I build any particular lab out, and tis happens, nothing works. --- On Wed, 12/31/08, Jianhong Fang mo...@hotmail.com wrote: From: Jianhong Fang mo...@hotmail.com Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 34, Issue 105 To: ccie_voice
[OSL | CCIE_Voice] (no subject)
Narinder, thanks for your reply. The DB was corrupted. During the IPCC installation, the system says to do not restart CRS Engine at any node for 10 minutes. But, after few minutes I've alredy configured the jtapi and I did restart the CRS. So... Cheers, Sergio.
[OSL | CCIE_Voice] (no subject)
[OSL | CCIE_Voice] (no subject)
You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions. C7200-GK(config-gk)#zone prefix local 020...Zone local contains active E164 registrations. Zone prefix change not allowed at this time. C7200-GK#sho gatekeeper endpoints GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags --- - --- - - - 10.2.6.41 1720 10.2.6.41 1719 local TERM ENDPOINT-ID: 638C77E40005 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 200010.2.6.41 1721 10.2.6.41 1739 local TERM ENDPOINT-ID: 63A80B86 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2001 http://www.easypost.com Anti-Virus Anti-Spam Web Mail thats hotter than hot
Re: [OSL | CCIE_Voice] (no subject)
This is correct - but a simple - shut, configure, no shut - will do the trick :) IOS allows this as of 12.4.15T btw. Mark Snow Sr Technical Instructor IPexpert, Inc. Sent from my iPhone On Mar 5, 2008, at 6:48 AM, Mike Reid [EMAIL PROTECTED] wrote: You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions. C7200-GK(config-gk)#zone prefix local 020... Zone local contains active E164 registrations. Zone prefix change not allowed at this time. C7200-GK#sho gatekeeper endpoints GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.2.6.41 1720 10.2.6.41 1719 local TERM ENDPOINT-ID: 638C77E40005 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2000 10.2.6.41 1721 10.2.6.41 1739 local TERM ENDPOINT-ID: 63A80B86 VERSION: 2 AGE: 163 secs SupportsAnnexE: FALSE E164-ID: 2001 http://www.easypost.com Anti-Virus Anti-Spam Web Mail thats hotter than hot
[OSL | CCIE_Voice] (no subject)
I need to provision some trunks going into CME and using scripting done in CME. Can someone please give me some guidance on this request? Negotiate with telco to point existing 800# lines into the CME trunks. Conduct appropriate scripting activiteis to make 800#s functional withing CME - Never miss a thing. Make Yahoo your homepage.
Re: [OSL | CCIE_Voice] (no subject)
What do you mean scripting? To the first point, you'll have to deal with your telco to have them point 800 numbers inbound. Will they just be routing an 800 number to your existing DID's (like remote call-forward) or will the 800 numbers be assigned directly to your circuits and they'll route DNIS digits inbound. Regardless, handling these within CME is just going to be a matter of setting up proper dial-peers (remember incoming called-number and direct-inward-dial statements) to handle the calls and send them where they need to go (phones registered to CCME, CCM via trunks, other H.323 or SIP peers). -matt Jonathan Preston wrote: I need to provision some trunks going into CME and using scripting done in CME. Can someone please give me some guidance on this request? * Negotiate with telco to point existing 800# lines into the CME trunks. * Conduct appropriate scripting activiteis to make 800#s functional withing CME Never miss a thing. Make Yahoo your homepage. http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs