Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
Hello All, The solution for my issue was both the H323 trunk and Gatekeeper controlled trunk should have the significant digits as 4 for the inbound calls. And the Gatekeeper controlled trunk should have Enable Inbound Faststart. Thanks Ryan for the hint, the only change I did was on the Gatekeeper controlled trunk instead of H323GW. When I did that on H323GW the issue was there so just tried it on the Gatekeeper controlled trunk and removed it on the H323GW, it started working. Thanks, Viki From: Ryan Maxam ryan.ma...@gmail.com To: vignesh sethuraman sethuvign...@yahoo.co.in Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Tuesday, 5 February 2013 8:25 PM Subject: Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7 I ran into this same problem. if you check Enable Inbound FastStart on you H323 gateway that should correct the problem. Its caused because you are communicating between a SIP trunk and an H323 trunk. On Tuesday, February 5, 2013, vignesh sethuraman wrote: Hello, In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2 from HQ and BR1. But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone but I could not answer the calls. Even after picking the handset, I could hear the ringback on the BR2 phones. I have kept the significant digits as 4 on both the CME (H.323GW) trunk and Gatekeeper controlled trunk. Could you please someone help to resolve this. Thanks, Viki___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
Missed to mention, this issue was faced only when I originate a call from SIP Phone registeredto CME towards SCCP/SIP Phones registered to UCM. If I originate a call from SCCP Phone registered to CME towards SCCP/SIP Phones registered to UCM everything is working fine without Enabling Inbound Faststart on the Gatekeeper controlled Trunk. In either of the case, the significant digits on the inbound calls on both the H323GW trunk and Gatekeeper controlled trunk should be 4. Just sending this as it might be useful to someone facing the same issue. Thanks, Viki From: vignesh sethuraman sethuvign...@yahoo.co.in To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Wednesday, 6 February 2013 10:51 AM Subject: Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7 Hello All, The solution for my issue was both the H323 trunk and Gatekeeper controlled trunk should have the significant digits as 4 for the inbound calls. And the Gatekeeper controlled trunk should have Enable Inbound Faststart. Thanks Ryan for the hint, the only change I did was on the Gatekeeper controlled trunk instead of H323GW. When I did that on H323GW the issue was there so just tried it on the Gatekeeper controlled trunk and removed it on the H323GW, it started working. Thanks, Viki From: Ryan Maxam ryan.ma...@gmail.com To: vignesh sethuraman sethuvign...@yahoo.co.in Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Tuesday, 5 February 2013 8:25 PM Subject: Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7 I ran into this same problem. if you check Enable Inbound FastStart on you H323 gateway that should correct the problem. Its caused because you are communicating between a SIP trunk and an H323 trunk. On Tuesday, February 5, 2013, vignesh sethuraman wrote Hello, In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2 from HQ and BR1. But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone but I could not answer the calls. Even after picking the handset, I could hear the ringback on the BR2 phones. I have kept the significant digits as 4 on both the CME (H.323GW) trunk and Gatekeeper controlled trunk. Could you please someone help to resolve this. Thanks, Viki ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
Hello, In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2 from HQ and BR1. But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone but I could not answer the calls. Even after picking the handset, I could hear the ringback on the BR2 phones. I have kept the significant digits as 4 on both the CME (H.323GW) trunk and Gatekeeper controlled trunk. Could you please someone help to resolve this. Thanks, Viki___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
I ran into this same problem. if you check Enable Inbound FastStart on you H323 gateway that should correct the problem. Its caused because you are communicating between a SIP trunk and an H323 trunk. On Tuesday, February 5, 2013, vignesh sethuraman wrote: Hello, In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2 from HQ and BR1. But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone but I could not answer the calls. Even after picking the handset, I could hear the ringback on the BR2 phones. I have kept the significant digits as 4 on both the CME (H.323GW) trunk and Gatekeeper controlled trunk. Could you please someone help to resolve this. Thanks, Viki ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
Do you have CUBE on gatekeeper as well? Try resetting Wait for incoming H.245 TCS checkbox on the Trunk configuration in CUCM. Sergey On Tue, Feb 5, 2013 at 1:34 PM, vignesh sethuraman sethuvign...@yahoo.co.in wrote: Hello, In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2 from HQ and BR1. But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone but I could not answer the calls. Even after picking the handset, I could hear the ringback on the BR2 phones. I have kept the significant digits as 4 on both the CME (H.323GW) trunk and Gatekeeper controlled trunk. Could you please someone help to resolve this. Thanks, Viki ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com