Re: [OSL | CCIE_Voice] MVA Calling Name
datucha, from my notes I can see the calling name and number from RDP were shown for any calls made through MVA - internal and external... I don't have that lab set up anymore at the moment, so cannot verify for 100% can someone confirm? 2012/2/16 datucha123 datucha123 datucha...@gmail.com Hello, When PSTN Phone makes call to MVA number (IVR) and then makes a call to HQ or any other site internal extensions, the Calling Name of the RDP Profile is not visible on the called Phone. Is it normal? or I have misconfigured something? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Calling name
Verify that the Display (Caller ID) is populated to RDP as well. On Sun, Jan 8, 2012 at 3:34 PM, study buddy studybudd...@gmail.com wrote: Hi All, I cant get my MVA calling name working i.e when I call in from my Remote number into MVA make a call to an internal DN, during alerting connect status I only see the 4digit calling number not the name set on the DN. On the Remote Destination Profile, Iv configured the name checked the Propagate selected for the shared line. is there something I am missing or any service parameter that needs to be changed to see the name? TR ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA Calling name
Hi All, I cant get my MVA calling name working i.e when I call in from my Remote number into MVA make a call to an internal DN, during alerting connect status I only see the 4digit calling number not the name set on the DN. On the Remote Destination Profile, Iv configured the name checked the Propagate selected for the shared line. is there something I am missing or any service parameter that needs to be changed to see the name? TR ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Calling Name
Thanks Amol, I read that too but even after I answer it the name still does not appear and I do have the RDP line settings set, see attached screenshot. Thanks Jason - Original Message - From: Amol Mittal Sent: 01/06/12 08:11 PM To: 'Jason Murray', ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] MVA Calling Name Jason, To my knowledge, it’s working as designed. When you call any internal extension after authenticating to the MVA, it shows only the calling number when the called phone is ringing. However, when the call gets connected, it shows the calling name (or rather the connected name) as well. Calling name would not appear after call connect, if you do not have calling name configured in RDP line settings. HTH Regards, Amol From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Jason Murray *Sent:* Friday, January 06, 2012 3:08 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] MVA Calling Name I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002. So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason attachment: rdp.JPG___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Calling Name
Try to configure the Alerting Name and ASCII Alerting Name for RDP Extensions - just in the screen shot that you haev sent. On Sat, Jan 7, 2012 at 7:28 PM, Jason Murray murr...@usa.com wrote: Thanks Amol, I read that too but even after I answer it the name still does not appear and I do have the RDP line settings set, see attached screenshot. Thanks Jason - Original Message - From: Amol Mittal Sent: 01/06/12 08:11 PM To: 'Jason Murray', ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] MVA Calling Name Jason, To my knowledge, it’s working as designed. When you call any internal extension after authenticating to the MVA, it shows only the calling number when the called phone is ringing. However, when the call gets connected, it shows the calling name (or rather the connected name) as well. Calling name would not appear after call connect, if you do not have calling name configured in RDP line settings. HTH Regards, Amol *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Jason Murray *Sent:* Friday, January 06, 2012 3:08 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] MVA Calling Name I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002. So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Calling Name
Yes that is configured too that was pulled over from the shared line 5002. Is there anything that affects MVA maybe a Transformation Pattern, Calling Party Transformation Pattern CSS, route pattern etc. I've tried playing around with those as well. Nothing has changed. What settings are involved, looked at, or passed through during MVA? Theres gotta be something other than the Line settings involved. Because if I call a number at the same site (5001) or even BR2 phones (3...) for calling number I get 10 digits instead of 4 like when I call 1002. Still now caller name when answered those on those sites either. - Original Message - From: datucha123 datucha123 Sent: 01/07/12 10:59 AM To: Jason Murray Subject: Re: [OSL | CCIE_Voice] MVA Calling Name Try to configure the Alerting Name and ASCII Alerting Name for RDP Extensions - just in the screen shot that you haev sent. On Sat, Jan 7, 2012 at 7:28 PM, Jason Murray murr...@usa.com wrote: Thanks Amol, I read that too but even after I answer it the name still does not appear and I do have the RDP line settings set, see attached screenshot. Thanks Jason - Original Message - From: Amol Mittal Sent: 01/06/12 08:11 PM To: 'Jason Murray', ccie_voice@onlinestudylist.com Subject: RE: [OSL | CCIE_Voice] MVA Calling Name Jason, To my knowledge, it’s working as designed. When you call any internal extension after authenticating to the MVA, it shows only the calling number when the called phone is ringing. However, when the call gets connected, it shows the calling name (or rather the connected name) as well. Calling name would not appear after call connect, if you do not have calling name configured in RDP line settings. HTH Regards, Amol From: ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com ] *On Behalf Of *Jason Murray *Sent:* Friday, January 06, 2012 3:08 PM *To:* ccie_voice@onlinestudylist.com *Subject:* [OSL | CCIE_Voice] MVA Calling Name I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002 tel:2123945002 . So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com http://www.ipexpert.com/ Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA Calling Name
I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002. So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA Calling Name
I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002. So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA Calling Name
Jason, To my knowledge, it’s working as designed. When you call any internal extension after authenticating to the MVA, it shows only the calling number when the called phone is ringing. However, when the call gets connected, it shows the calling name (or rather the connected name) as well. Calling name would not appear after call connect, if you do not have calling name configured in RDP line settings. HTH Regards, Amol From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jason Murray Sent: Friday, January 06, 2012 3:08 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] MVA Calling Name I've searched the lists and google until I have no hair left. I am doing Vol1 5C.12 MVA. Everything works beautifully. I dial in from the PSTN phone on line two to 5999. It answers put in my pin. Press 1 to dial a number. Dial 1002. It rings and I can answer it. So my problem is there is no Calling name just number of 5002. I have Calling name set in the RDP line settings. If I dial 5001 using MVA the number is shown as 2123945002. So I am trying to figure out how it decides what the display name and number is pulled from. I see that alot of people in the threads have had this before and most people say it should work. Others say its by design. And I havent seen anybody have a fix for it. Even during Vic's walkthrough of this section shows he only gets 5002 on the display when he calls 1002 with MVA. Anybody have any info on this. I cant be the only one. Thanks for your help. Jason ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA - Calling Name
Hi, Is it expected behaviour that when I do an internal call from Mobile Voice Access the Calling Name doesn't appear? I configured the display name on the line also for the RDP , and the CSS used on the RDP is the same used for line for which I can of course see the caller name. Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA calling name
I have RDP with display name configured. However the calling name is displayed only after the call is connected. Does it display the calling name in ringing state in your setup? I tried with h323 and mgcp gateways with the same result. --- On Sat, 25/6/11, Cristobal Priego cristobalpri...@gmail.com wrote: From: Cristobal Priego cristobalpri...@gmail.com Subject: Re: [OSL | CCIE_Voice] MVA calling name To: Victor Malyuga victor_maly...@yahoo.com Cc: ccie_voice@onlinestudylist.com Date: Saturday, 25 June, 2011, 21:21 make sure that on your RDP you have the Display field set, it will not inherit the name from the line you're associating it with 2011/6/24 Victor Malyuga victor_maly...@yahoo.com If I make a call from the remote destination number via MVA the calling name is not displayed on the called phone while the phone is ringing. Only the extension associated with the RDP is displayed. Once the call is connected the name and extension is displayed on the called phone. Did someone come across that? Line in the RDP profile has display name configured. RDP number matches when I call the mva number because I am not prompted to enter RDP number. The same problem is described in this post https://supportforums.cisco.com/message/3284389 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA calling name
make sure that on your RDP you have the Display field set, it will not inherit the name from the line you're associating it with 2011/6/24 Victor Malyuga victor_maly...@yahoo.com If I make a call from the remote destination number via MVA the calling name is not displayed on the called phone while the phone is ringing. Only the extension associated with the RDP is displayed. Once the call is connected the name and extension is displayed on the called phone. Did someone come across that? Line in the RDP profile has display name configured. RDP number matches when I call the mva number because I am not prompted to enter RDP number. The same problem is described in this post https://supportforums.cisco.com/message/3284389 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] MVA calling name
If I make a call from the remote destination number via MVA the calling name is not displayed on the called phone while the phone is ringing. Only the extension associated with the RDP is displayed. Once the call is connected the name and extension is displayed on the called phone. Did someone come across that? Line in the RDP profile has display name configured. RDP number matches when I call the mva number because I am not prompted to enter RDP number. The same problem is described in this post https://supportforums.cisco.com/message/3284389 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com