Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
In my experience changing the call manager service parameters for default inter and intra region codecs to g729 causes this to work in both directions. As long as your dial-peer is g729 and the GK trunk is in a g729 region. Matt On May 21, 2010, at 12:06 PM, Graham Hopkins wrote: Matthew - I found that the call from HQ to BR is fine and shows 16kbps, its the call from BR2 to HQ that has the problem, so to complete the task just make the call in the right direction :-) Did you have the same issue ? Regards Graham Hopkins On 21 May 2010, at 16:50, Berry, Matthew J. wrote: That’s great to know. I burned a few hours last night on Proctor trying to get this to work. Hopefully we won’t be asked a question like that on the lab. According to my understanding, then, we cannot technically complete and get points for question 5.1 since it requires you to produce the “show gatekeeper calls” output listed in the question. Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.com From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Friday, May 21, 2010 10:44 AM To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All – I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but “show gatekeeper calls” shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com www.krollontrack.com | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
True, but then you have to remember to explicitly set the intra-region codec to that required by other parts of the lab - for example G.711 in HQ - otherwise you break that. Regards Graham Hopkins On 22 May 2010, at 07:33, Matthew Hall wrote: In my experience changing the call manager service parameters for default inter and intra region codecs to g729 causes this to work in both directions. As long as your dial-peer is g729 and the GK trunk is in a g729 region. Matt On May 21, 2010, at 12:06 PM, Graham Hopkins wrote: Matthew - I found that the call from HQ to BR is fine and shows 16kbps, its the call from BR2 to HQ that has the problem, so to complete the task just make the call in the right direction :-) Did you have the same issue ? Regards Graham Hopkins On 21 May 2010, at 16:50, Berry, Matthew J. wrote: That’s great to know. I burned a few hours last night on Proctor trying to get this to work. Hopefully we won’t be asked a question like that on the lab. According to my understanding, then, we cannot technically complete and get points for question 5.1 since it requires you to produce the “show gatekeeper calls” output listed in the question. Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.com From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Friday, May 21, 2010 10:44 AM To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All – I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but “show gatekeeper calls” shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com www.krollontrack.com | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
[OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
All - I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but show gatekeeper calls shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.commailto:david.ra...@kroll.com www.krollontrack.comhttp://www.krollbackgroundscreening.com/ | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
BRQ enabled? Hardcode G.729 on incoming dial-peer? On Fri, May 21, 2010 at 10:21 AM, Berry, Matthew J. mjbe...@krollontrack.com wrote: All – I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but “show gatekeeper calls” shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com www.krollontrack.com | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
I did enable BRQ as a troubleshooting method. After applying the parameter and resetting my devices, the problem still existed. Here is the dial-peer on my BR2-RTR: dial-peer voice 30 voip destination-pattern [15]...$ session target ras incoming called-number . tech-prefix 1# no vad Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.com -Original Message- From: ccieid1ot [mailto:ccieid...@gmail.com] Sent: Friday, May 21, 2010 10:23 AM To: Berry, Matthew J. Cc: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue BRQ enabled? Hardcode G.729 on incoming dial-peer? On Fri, May 21, 2010 at 10:21 AM, Berry, Matthew J. mjbe...@krollontrack.com wrote: All - I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but show gatekeeper calls shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com www.krollontrack.com | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All - I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but show gatekeeper calls shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.commailto:david.ra...@kroll.com www.krollontrack.comhttp://www.krollbackgroundscreening.com/ | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
That's great to know. I burned a few hours last night on Proctor trying to get this to work. Hopefully we won't be asked a question like that on the lab. According to my understanding, then, we cannot technically complete and get points for question 5.1 since it requires you to produce the show gatekeeper calls output listed in the question. Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.commailto:david.ra...@kroll.com From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Friday, May 21, 2010 10:44 AM To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All - I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but show gatekeeper calls shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.commailto:david.ra...@kroll.com www.krollontrack.comhttp://www.krollbackgroundscreening.com/ | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
The workaround is to set both service parameters to g729 (listed below). Really? · Intraregion Audio Codec Default Required Field · Interregion Audio Codec Default Required Field If we were required to show that output, we'd need to configure intraregion to g729 and then manually define g711-to-g711 for within each region. That's just crazy talk. :) CSCsl74701 Bug Details ARQ requests 1280 when no regions are defined to use g711 Symptom: ARQ sent to gatekeeper requests bandwidth for a g711 call (1280) even though only g729 is configured in all of the regions. Conditions: In a call routed to a GK controlled ICT and all regions are configured for g729, the originating CCM requests 160 in the ARQ to the gatekeeper. When the h225 setup arrives at the terminating CCM, an ARQ is sent to the gatekeeper requesting 1280. This is because the IntraAudioRegionDefault and InterAudioRegionDefault service paramater settings are included in the calculation for the maximum bandwidth request. Callmanager default setting for IntraAudioRegionDefault is g711. It should check region pair before applying default if there is nothing matched. Workaround: Set both service parameters to g729, or increase zone bandwidth setting on the gatekeeper Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.commailto:david.ra...@kroll.com From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Friday, May 21, 2010 10:44 AM To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All - I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but show gatekeeper calls shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.commailto:david.ra...@kroll.com www.krollontrack.comhttp://www.krollbackgroundscreening.com/ | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue
Matthew - I found that the call from HQ to BR is fine and shows 16kbps, its the call from BR2 to HQ that has the problem, so to complete the task just make the call in the right direction :-) Did you have the same issue ? Regards Graham Hopkins On 21 May 2010, at 16:50, Berry, Matthew J. wrote: That’s great to know. I burned a few hours last night on Proctor trying to get this to work. Hopefully we won’t be asked a question like that on the lab. According to my understanding, then, we cannot technically complete and get points for question 5.1 since it requires you to produce the “show gatekeeper calls” output listed in the question. Matthew Berry, CCVP, Sr. Unified Communications Engineer mjbe...@kroll.com From: Roger Källberg [mailto:roger.kallb...@cygate.se] Sent: Friday, May 21, 2010 10:44 AM To: Berry, Matthew J.; CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: RE: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue Also this, http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16188.html Roger Källberg Unified Communication Consultant Cygate AB From: Berry, Matthew J. [mailto:mjbe...@krollontrack.com] Sent: den 21 maj 2010 17:21 To: CCIE Voice OSL (ccie_voice@onlinestudylist.com) Subject: [OSL | CCIE_Voice] Show Gatekeeper Calls - Odd Issue All – I had an issue last night on Vol 2 Lab 2. I am sending calls from HQ (Region = HQ) to BR2 over my H.225 trunk (Region = GK). Region setting between HQ and GK specifies G.729. I have a transcoder registered on the BR2 router. When I call across the gatekeeper, my endpoints show G.729, but “show gatekeeper calls” shows 128kbps. Extremely odd. Does anyone have insight into this? Thanks! Matthew Berry, CCVP, Sr. Unified Communications Engineer Kroll | 9023 Columbine Road, Eden Prairie, MN 55347 Single Number Reach +1 952 516 3748 | Fax +1 952 516 3646 | mjbe...@kroll.com www.krollontrack.com | www.kroll.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
