[OSL | CCIE_Voice] TCS capabilities
Hello guys. I am doing a lab where my gatekeeper is cube as well. When I ring pstn number 0091! The cucm phones shows connected and pstn phone still ringing. To fix it I uncheck wait for TCS far end capabilities. That seems to fix the issue because cube is involved in this scenario. Which debug should I run to see this or how can I check from debugs that I need to uncheck that ? Thanks a lot. Sent from my iPad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TCS capabilities
TCS basically works when there are PSTN TDM connections. In the voice lab, I would stick to not checking the TCS box. Depending on the lab and specific requirements, you are more than likely to need a codec specific MTP. With cube you will probably need MTP registered to the router. Strait gatekeeper will more than likely require a MTP registered to UCM. Debug h225 asn1 is a good command Debug ras is another good command -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Nowork_onlyfun Sent: Wednesday, September 28, 2011 6:43 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] TCS capabilities Hello guys. I am doing a lab where my gatekeeper is cube as well. When I ring pstn number 0091! The cucm phones shows connected and pstn phone still ringing. To fix it I uncheck wait for TCS far end capabilities. That seems to fix the issue because cube is involved in this scenario. Which debug should I run to see this or how can I check from debugs that I need to uncheck that ? Thanks a lot. Sent from my iPad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TCS capabilities
I did this before, you can use debug cch323 h225 debug cch323 h245 after Ringing you will find the party under waiting h245 capabilities, I recommend to read SRND it has some good information about this. Regards, From: DeShon Crayton dcrayto...@comcast.net To: 'Nowork_onlyfun' noworkonlyf...@gmail.com; ccie_voice@onlinestudylist.com Sent: Wednesday, September 28, 2011 5:06 PM Subject: Re: [OSL | CCIE_Voice] TCS capabilities TCS basically works when there are PSTN TDM connections. In the voice lab, I would stick to not checking the TCS box. Depending on the lab and specific requirements, you are more than likely to need a codec specific MTP. With cube you will probably need MTP registered to the router. Strait gatekeeper will more than likely require a MTP registered to UCM. Debug h225 asn1 is a good command Debug ras is another good command -Original Message- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Nowork_onlyfun Sent: Wednesday, September 28, 2011 6:43 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] TCS capabilities Hello guys. I am doing a lab where my gatekeeper is cube as well. When I ring pstn number 0091! The cucm phones shows connected and pstn phone still ringing. To fix it I uncheck wait for TCS far end capabilities. That seems to fix the issue because cube is involved in this scenario. Which debug should I run to see this or how can I check from debugs that I need to uncheck that ? Thanks a lot. Sent from my iPad ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] TCS capabilities
Hey All , the TCP (by default) will happen after the connect and it will be using the H245 portion of the H323 family so the command you guys referring to will not show you what is going on and even h245 asn1 will also will not show you anything because what happened is that the CCM is waiting for the far end (which the CUBE ) to send his capability via TCS and the CUBE is also waiting for the CCM to send capability ( the cube will not send his capability either) so the Media capability process inside the H323 protocl will timeout after 10 sec (by default ) so to see the time out happens you can use deb cch323 h245 which i don't recommend because its pretty cryptic and you will not see a clear state about the time out , however in the CCM SDL traces (detailed level) you will see the process timing out clearly and it give you the reason of the timing : 001745916| 2011/05/19 19:18:28.462| 001| SdlSig| H245SessionEstablishedFailure | waitForCapabilitiesExchange | H245Interface(1,100,148,8) | H245SessionManager(1,100,23,8) | (0,0,0,0).0-(*:*) | [R:NP - HP: 0, NP: 5, LP: 1, VLP: 0, LZP: 0 DBP: 0] Thanks Ash ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
