Re: [cisco-voip] SIP phones CMR
What specific data are you looking for? The newer phones have dropped MOS and Q-Factor subjective ratings in lieu of concealed seconds and severely concealed seconds. You won't see any raw MOS values reported by newer phones. -Ryan On Apr 25, 2014, at 1:16 PM, Justin Steinberg jsteinb...@gmail.com wrote: I've noticed on the last few systems I have worked on that the SIP based phones are not showing any CMR data in the CUCM CAR system. This is happening on atleast 8945s the new 7841s. Also I have noticed that the Jabber for Windows phones aren't reporting it either. This is happening for both on-net IP phone to IP phone calls and also off-net SIP calls to CUBEs (then to SIP Provider) and also off-net calls via CUCM SIP trunk to Cisco 29xx PRI gateway. Is there something I need to turn on for the CMR data to be generated ? Or is this just not supported in the SIP phones / CUCM ? Justin ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] SIP phones CMR
The only data I see in the CMR are the IP addresses of the endpoints and the payloadcapability.All the packets sent/received, jitter, latency, etc values are always just 'null'. Sample below. [image: Inline image 1] On Mon, Apr 28, 2014 at 2:10 PM, Ryan Ratliff (rratliff) rratl...@cisco.com wrote: What specific data are you looking for? The newer phones have dropped MOS and Q-Factor subjective ratings in lieu of concealed seconds and severely concealed seconds. You won't see any raw MOS values reported by newer phones. -Ryan On Apr 25, 2014, at 1:16 PM, Justin Steinberg jsteinb...@gmail.com wrote: I've noticed on the last few systems I have worked on that the SIP based phones are not showing any CMR data in the CUCM CAR system. This is happening on atleast 8945s the new 7841s. Also I have noticed that the Jabber for Windows phones aren't reporting it either. This is happening for both on-net IP phone to IP phone calls and also off-net SIP calls to CUBEs (then to SIP Provider) and also off-net calls via CUCM SIP trunk to Cisco 29xx PRI gateway. Is there something I need to turn on for the CMR data to be generated ? Or is this just not supported in the SIP phones / CUCM ? Justin ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
[cisco-voip] SIP phones CMR
I've noticed on the last few systems I have worked on that the SIP based phones are not showing any CMR data in the CUCM CAR system. This is happening on atleast 8945s the new 7841s. Also I have noticed that the Jabber for Windows phones aren't reporting it either. This is happening for both on-net IP phone to IP phone calls and also off-net SIP calls to CUBEs (then to SIP Provider) and also off-net calls via CUCM SIP trunk to Cisco 29xx PRI gateway. Is there something I need to turn on for the CMR data to be generated ? Or is this just not supported in the SIP phones / CUCM ? Justin ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip