Re: Stus-List Raycor Filters

[Josh Muckley via CnC-List]

I'm a big fan of the 200FG.  I've completely rebuilt mine with all new
o-rings and I have plenty of the cost effective cartridges.  Despite being
discontinued the cartridges are still extremely available.  I modified mine
with a vacuum gauge and a vent/bleed valve.  As for your stuck drain valve,
mine is plastic and has never gotten stuck...though I don't use it very
often.  You might try McMaster-Carr for a replacement fitting.  Straight
thread not tapered.  I can help if you need.  I may have a metal drain
valve laying around too.  If you think you might want it, let me know.

https://youtu.be/H-GI38vE4hQ

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD

On Sun, Apr 29, 2018, 9:36 PM tom via CnC-List 
wrote:

> Hello Everybody,
>
> I have an old Raycor 200FG that takes replacement cartridges from the top
> on my Yanmar 2 GMF.
>
> The bottom clean out valve is frozen and the hose fittings need attention.
>
> This model has been replaced with newer screw on from the bottom styles.
>
> Wondering what experiences owners have had comparing the old and new. Are
> these newer styles easier/better than the old drop in filter that I have or
> should I just repair the old?
>
> Thanks much,
>
> Tom Oryniak
>
> "Carry On"
>
> 33-1
>
> Raritan Bay, NJ
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Looking to replace bracket for windex on C&C 35

[Matthew Schlanger via CnC-List]

The light is great when sailing at night. 
Yes I have the tack tick but being able to see your masthead fly is nice.

I ended up buying a new windex and light on Defender. 
It seems I had an old version of a Davis 15.
Thanks for the link, amazing to see I could have gotten a bracket, but the 
upright was bent, didn’t want to risk problems.

Thanks

Matt

> On Apr 28, 2018, at 8:03 AM, Jeffrey Nelson via CnC-List 
>  wrote:
> 
> Correct website is:
> https://shop.yachtshop.ca/ 
> 
>  Cheers,
>Jeff Nelson
>Muir Caileag
>C&C 30
>Armdale Y.C.
> On 4/28/2018 8:09 AM, Hoyt, Mike via CnC-List wrote:
>> Yacht shop. I think is www.yachtshop.ca 
>> 
>> I bought one with light for our last boat. Ironically after that I never 
>> sailed that boat after dark
>> 
>> Mike
>> Persistence
>> Halifax, ns
>> 
>> From: CnC-List [cnc-list-boun...@cnc-list.com 
>> ] on behalf of Edd Schillay via 
>> CnC-List [cnc-list@cnc-list.com ]
>> Sent: April 27, 2018 8:04 PM
>> To: cnc-list@cnc-list.com 
>> Cc: Edd Schillay
>> Subject: Re: Stus-List Looking to replace bracket for windex on C&C 35
>> 
>> Matthew,
>> 
>> Good options on eBay for the Windex and/or light.
>> 
>> http://www.ebay.com/bhp/davis-windex 
>> 
>> All the best,
>> 
>> Edd
>> 
>> ---
>> Edd M. Schillay
>> Captain of the Starship Enterprise
>> C&C 37+ | Sail No: NCC-1701-B
>> City Island, New York
>> www.StarshipSailing.com 
>>  
>> 
>> ---
>> 914.774.9767   | Mobile
>> ---
>> Sent via iPhone X
>> iPhone. iTypos. iApologize
>> 
>> 
>> On Apr 27, 2018, at 6:57 PM, Matthew Schlanger via CnC-List 
>> >  
>> > wrote:
>> 
>> Hello C&C list,
>> 
>> I have not been here for a while but the weather is turning nice and I found 
>> my masthead fly, also known as a windex, broken and on the ground.
>> It’s always something.
>> Mast was down, I guess I should have removed it.
>> 
>> This is for a C&C 35 mk3.
>> Does anyone know where I can get a replacement for the bracket, with a lamp.
>> Alternatively, any suggestions for replacing the whole thing if I can’t find 
>> a bracket.
>> 
>> Thanks in advance.
>> 
>> Matthew Schlanger
>> The Office
>> C&C 35 mkIII
>> 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray 
>> 
>> 
>> 
>> ___
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray 
>> 
>> 
> 
> 
>  
> 
> Virus-free. www.avast.com 
> 
>  
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Forward Hatch Handle for 30-2

[Jim Reinardy via CnC-List]

BTW, based on the helpful link Dennis sent, I believe it is a 
Rollstop.  The Ocean handles would appear to fit, though they look slightly 
different.  Sounds like Josh was able to get it work with his.
Jim



Get Outlook for iOS





On Sun, Apr 29, 2018 at 9:16 PM -0500, "Josh Muckley via CnC-List" 
 wrote:










I just replaced mine.  If they are the same you are welcome to one of my old 
parts.  They are pretty cheap to buy new.  The failure mechanism on mine was 
that the center stem pulled out of the mushroom cap.
This is what I 
replaced:https://hatchmasters.com/product/lewmar-mushroom-handle-caps/

This is what I replaced them 
with:https://hatchmasters.com/product/lewmar-ocean-rollstop-handle-top/

Josh Muckley S/V Sea Hawk 1989 C&C 37+Solomons, MD 
On Sun, Apr 29, 2018, 9:39 PM Jim Reinardy via CnC-List  
wrote:








Hello All,
Down at the boat today and noticed that one of the locking handles on my 
forward hatch is cracked and not holding well.  I believe it is a Lewmar hatch, 
but I don’t find a replacement handle that looks like it.  Anybody know of a 
source for this part?
Thanks,
Jim ReinardyC&C 30-2 “Firewater”Milwaukee, WI


Get Outlook for iOS

___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray









___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Forward Hatch Handle for 30-2

[Jim Reinardy via CnC-List]

Josh,
What went on mine was the tab on the interior handle on the left side.  If you 
have that as surplus, I would gladly take it off your hands!
Jim



Get Outlook for iOS





On Sun, Apr 29, 2018 at 9:16 PM -0500, "Josh Muckley via CnC-List" 
 wrote:










I just replaced mine.  If they are the same you are welcome to one of my old 
parts.  They are pretty cheap to buy new.  The failure mechanism on mine was 
that the center stem pulled out of the mushroom cap.
This is what I 
replaced:https://hatchmasters.com/product/lewmar-mushroom-handle-caps/

This is what I replaced them 
with:https://hatchmasters.com/product/lewmar-ocean-rollstop-handle-top/

Josh Muckley S/V Sea Hawk 1989 C&C 37+Solomons, MD 
On Sun, Apr 29, 2018, 9:39 PM Jim Reinardy via CnC-List  
wrote:








Hello All,
Down at the boat today and noticed that one of the locking handles on my 
forward hatch is cracked and not holding well.  I believe it is a Lewmar hatch, 
but I don’t find a replacement handle that looks like it.  Anybody know of a 
source for this part?
Thanks,
Jim ReinardyC&C 30-2 “Firewater”Milwaukee, WI


Get Outlook for iOS

___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray









___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Forward Hatch Handle for 30-2

[Josh Muckley via CnC-List]

I just replaced mine.  If they are the same you are welcome to one of my
old parts.  They are pretty cheap to buy new.  The failure mechanism on
mine was that the center stem pulled out of the mushroom cap.

This is what I replaced:
https://hatchmasters.com/product/lewmar-mushroom-handle-caps/

This is what I replaced them with:
https://hatchmasters.com/product/lewmar-ocean-rollstop-handle-top/

Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD

On Sun, Apr 29, 2018, 9:39 PM Jim Reinardy via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hello All,
>
> Down at the boat today and noticed that one of the locking handles on my
> forward hatch is cracked and not holding well.  I believe it is a Lewmar
> hatch, but I don’t find a replacement handle that looks like it.  Anybody
> know of a source for this part?
>
> Thanks,
>
> Jim Reinardy
> C&C 30-2 “Firewater”
> Milwaukee, WI
>
> Get Outlook for iOS 
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Racor Filters

[Marek Dziedzic via CnC-List]

The replacement cartridge filters are reasonably convenient. But before you 
switch, check the prices; some of these cartridges are quite expensive.

I used to have the 220 model. It has a very useful hand pump that helps in 
re-priming the fuel line. But…, that pump started leaking (and the replacement 
would cost about $150).

Marek
1994 C270 “Legato”
Ottawa, ON

From: CnC-List  On Behalf Of tom via CnC-List
Sent: Sunday, April 29, 2018 21:35
To: cnc-list@cnc-list.com
Cc: tom 
Subject: Stus-List Raycor Filters


Hello Everybody,

I have an old Raycor 200FG that takes replacement cartridges from the top on my 
Yanmar 2 GMF.

The bottom clean out valve is frozen and the hose fittings need attention.

This model has been replaced with newer screw on from the bottom styles.

Wondering what experiences owners have had comparing the old and new. Are these 
newer styles easier/better than the old drop in filter that I have or should I 
just repair the old?

Thanks much,

Tom Oryniak

"Carry On"

33-1

Raritan Bay, NJ

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Forward Hatch Handle for 30-2

[Dennis C. via CnC-List]

https://www.lewmar.com/sites/default/files/Hatch%20Identification.pdf

Dennis C.

On Sun, Apr 29, 2018 at 8:38 PM, Jim Reinardy via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hello All,
>
> Down at the boat today and noticed that one of the locking handles on my
> forward hatch is cracked and not holding well.  I believe it is a Lewmar
> hatch, but I don’t find a replacement handle that looks like it.  Anybody
> know of a source for this part?
>
> Thanks,
>
> Jim Reinardy
> C&C 30-2 “Firewater”
> Milwaukee, WI
>
> Get Outlook for iOS 
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Forward Hatch Handle for 30-2

[Jim Reinardy via CnC-List]

Hello All,
Down at the boat today and noticed that one of the locking handles on my 
forward hatch is cracked and not holding well.  I believe it is a Lewmar hatch, 
but I don’t find a replacement handle that looks like it.  Anybody know of a 
source for this part?
Thanks,
Jim ReinardyC&C 30-2 “Firewater”Milwaukee, WI


Get Outlook for iOS

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Raycor Filters

[tom via CnC-List]

Hello Everybody,

I have an old Raycor 200FG that takes replacement cartridges from the top
on my Yanmar 2 GMF.

The bottom clean out valve is frozen and the hose fittings need attention.

This model has been replaced with newer screw on from the bottom styles.

Wondering what experiences owners have had comparing the old and new. Are
these newer styles easier/better than the old drop in filter that I have or
should I just repair the old?

Thanks much,

Tom Oryniak

"Carry On"

33-1

Raritan Bay, NJ
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Rocha

[G Collins via CnC-List]

Anchor weldment?  What anchor weldment???

Mine came with a clean bow.  I bolted on a Garhauer roller, and I'm 
running a Rocna 15 in it.

Before I went too far I traced one, cut it out in plywood, and played 
with it to be sure I'd be OK with the fit.  Or find someone local with 
one and borrow it?

Graham Collins
Secret Plans
C&C 35-III #11

On 2018-04-29 2:35 PM, Brien Sadler via CnC-List wrote:
> Listers,
>
> Quick question to all the 35-3 owners. Does anyone have a Rocna anchor and if 
> so does the standard Rocna fit or do I need the Vulcan to fit that anchor 
> roller weldment? Thanks for the help.
>
> P.S. I’m not looking to get into the anchor debate I did a bunch of research 
> none are perfect and anything I feel is better than the tired CQR that I have 
> now.
>
> Thanks
>
> Brien Sadler
> S/V TAZ
> 1987 C&C 35-3
>
> Sent from my iPad
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
>

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Rocha

[Jake Brodersen via CnC-List]

Brien,

I'm a Danforth user.  Not sure how well the Rocna would fit.

Jake

Jake Brodersen
C&C 35 Mk-III “Midnight Mistress”
Hampton VA




-Original Message-
From: CnC-List  On Behalf Of Brien Sadler via 
CnC-List
Sent: Sunday, April 29, 2018 13:35
To: cnc-list@cnc-list.com
Cc: Brien Sadler 
Subject: Stus-List Rocha


Listers,

Quick question to all the 35-3 owners. Does anyone have a Rocna anchor and if 
so does the standard Rocna fit or do I need the Vulcan to fit that anchor 
roller weldment? Thanks for the help. 

P.S. I’m not looking to get into the anchor debate I did a bunch of research 
none are perfect and anything I feel is better than the tired CQR that I have 
now.

Thanks

Brien Sadler
S/V TAZ 
1987 C&C 35-3

Sent from my iPad
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Rocha

[Persuasion37 via CnC-List]

No debate here.  Everyone knows that CQRs belong in the smelter. No information 
on your problem though.

Mike
PERSUASION
C&C 37 K/CB
Long Sault

> On Apr 29, 2018, at 1:35 PM, Brien Sadler via CnC-List 
>  wrote:
> 
> 
> Listers,
> 
> Quick question to all the 35-3 owners. Does anyone have a Rocna anchor and if 
> so does the standard Rocna fit or do I need the Vulcan to fit that anchor 
> roller weldment? Thanks for the help. 
> 
> P.S. I’m not looking to get into the anchor debate I did a bunch of research 
> none are perfect and anything I feel is better than the tired CQR that I have 
> now.
> 
> Thanks
> 
> Brien Sadler
> S/V TAZ 
> 1987 C&C 35-3
> 
> Sent from my iPad
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Rocha

[Brien Sadler via CnC-List]

Listers,

Quick question to all the 35-3 owners. Does anyone have a Rocna anchor and if 
so does the standard Rocna fit or do I need the Vulcan to fit that anchor 
roller weldment? Thanks for the help. 

P.S. I’m not looking to get into the anchor debate I did a bunch of research 
none are perfect and anything I feel is better than the tired CQR that I have 
now.

Thanks

Brien Sadler
S/V TAZ 
1987 C&C 35-3

Sent from my iPad
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray