Re: Stus-List Holding tank

[Wade Glew via CnC-List]

is it correct to assume that the original fittings on my Kracor holding
tank will determine the size of vent hose I can use, or can I retrofit
larger hoses?
Would a second vent require a pro to create a fitting on my existing tank?

Wade
Oh Boy 33-2



On Sat, Sep 1, 2018 at 10:41 AM Howard and Skippy via CnC-List <
cnc-list@cnc-list.com> wrote:

> Dave. Kaseler
> SLY
> 1975 C&C 33
> Dave,
> One of the most important things you can do with this install is insure
> proper hose diameter for ventilation. Most head odor problems can be traced
> to vent hoses that are too small.  If you find or have a tank made, put in
> the largest vent hose size you can fit.
> Howard Paul, Skipper of Knot Again, 35-3
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Holding tanks

[Rodney Randow via CnC-List]

1. The holding tank is behind the head and under the locker shelf. All 
the fitting are located on the top surface. The tank is shaped to fit 
into this space and I believe the tank is original.


2. Model: Kracor R-6046
Tank top: 12.5 x 22
side view: 19h (cabinet)/5h (hull) x 12.5w (top)/5w (bottom)

Rod
C&C33-1

On 08/31/2018 04:55 PM, Dave. via CnC-List wrote:

SLY has been using a Type 1 Sanitation System but these are no longer legal in 
Puget Sound so we need to install a holding tank. Yuck! I looked in our original 
C&C manual and found a 15.5 gallon holding tank listed. Not sure if these were 
standard issue or an option but SLY did not come to us with a holding tank. So my 
questions are:
1. Where were the holding tanks installed?
2. What were there configuration? Dimensions?
3. Are these units or similar units available and from whom?
Thanks again for your collective thoughts.
Dave. Kaseler
SLY
1975 C&C 33



Sent from my iPad

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Looking for an LED fixture to replace Overhead Fluorescent lighting

[Dennis C. via CnC-List]

https://www.amazon.com/Thin-Lite-116-Fluorescent-Light-Fixture/dp/B000AEPRYA

Dennis C.



On Mon, Sep 3, 2018 at 11:23 AM kelly petew via CnC-List <
cnc-list@cnc-list.com> wrote:

> the overhead fluorescent lighting [double tubes] in my 30MKII no longer
> works.  Thinking the fluorescent tubes were my problem and wanting improved
> lighting in the saloon, I bought Marinebeam's t5 replacement tubes and
> re-wired the existing fixture to bypass the ballast.  However, it appears
> the *FIXTURE* is bad.
>
>
>
> Can anyone recommend a replacement Fixture that will fit in the overhead
> liner [approx. dimensions = 5"W, 11 1/4"L, 15/16"D]??
>
>
> Thanks,
>
>
> Pete W.
>
>
> Siren Song
>
> C&C30MKII
>
> Deltaville, Va.
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Recall interior your LED light conversion

[Dave via CnC-List]

I am that person.

http://cncwindstar.blogspot.com/2017/07/led-interior-lighting-on-budget.html

Dave

Sent from my iPad

> On Sep 2, 2018, at 9:02 PM,   
> wrote:
> 
> Ok, I spent way too much time looking on the archives for a LED conversion
> someone posted last year.  Hard to find and didn't find it.  The person
> bought an LED light fixture off the shelf and added red LED diodes with
> switch to make it a red/white light.  I made one and put over the head and
> really like it.  Was going to do some more but can't find the instructions
> for the light including the link to the LED resistor type, etc.  Could that
> person forward me the link pleaseassuming you are still around. 
> 
> Thanks,
> Paul Hood
> C&C34 REFUGE, Georgian Bay
> 
> 
> 
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Looking for an LED fixture to replace Overhead Fluorescent lighting

[Chad Osmond via CnC-List]

We just bought some new 60 LED/ft strips from Lee Valley, a new switch, and
retrofitted with 3x 1' strips of LED's in the housing after hitting the
existing components.

More brightness at hopefully less power.


We did the one in the galley and I plan on doing the head one next.


On Mon, Sep 3, 2018, 12:23 PM kelly petew via CnC-List, <
cnc-list@cnc-list.com> wrote:

> the overhead fluorescent lighting [double tubes] in my 30MKII no longer
> works.  Thinking the fluorescent tubes were my problem and wanting improved
> lighting in the saloon, I bought Marinebeam's t5 replacement tubes and
> re-wired the existing fixture to bypass the ballast.  However, it appears
> the *FIXTURE* is bad.
>
>
>
> Can anyone recommend a replacement Fixture that will fit in the overhead
> liner [approx. dimensions = 5"W, 11 1/4"L, 15/16"D]??
>
>
> Thanks,
>
>
> Pete W.
>
>
> Siren Song
>
> C&C30MKII
>
> Deltaville, Va.
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Looking for an LED fixture to replace Overhead Fluorescent lighting

[kelly petew via CnC-List]

the overhead fluorescent lighting [double tubes] in my 30MKII no longer works.  
Thinking the fluorescent tubes were my problem and wanting improved lighting in 
the saloon, I bought Marinebeam's t5 replacement tubes and re-wired the 
existing fixture to bypass the ballast.  However, it appears the FIXTURE is bad.



Can anyone recommend a replacement Fixture that will fit in the overhead liner 
[approx. dimensions = 5"W, 11 1/4"L, 15/16"D]??


Thanks,


Pete W.


Siren Song

C&C30MKII

Deltaville, Va.
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Underdeck autopilot 37+

[Gary Russell via CnC-List]

No water entering boat.
Gary
~~~_/)~~



On Mon, Sep 3, 2018 at 11:56 AM Joe Macdonald via CnC-List <
cnc-list@cnc-list.com> wrote:

> Nice Work!!  Love it..
>
> Is there any water from the lower rudder bearing entering the boat in big
> seas?
>
> Thank you
>
> joemac
>
>
>
> Sent from Mail  for
> Windows 10
>
>
>
> *From: *Gary Russell via CnC-List 
> *Sent: *Monday, September 3, 2018 10:57 AM
> *To: *C&C List 
> *Cc: *Gary Russell 
> *Subject: *Re: Stus-List Underdeck autopilot 37+
>
>
>
> I designed what I think is a solid platform for the drive unit that puts
> almost no stress on the hull.  See pictures here
> 
> .
>
>
>
> Gary
>
> S/V Kaylarah (formerly High Maintenance)
>
> '90 C&C 37+
>
> East Greenwich, RI, USA
>
> ~~~_/)~~
>
>
>
>
>
> On Sun, Sep 2, 2018 at 11:30 AM Len Mitchell via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Joe, there was quite a discussion on this subject maybe a year ago and you
> should be able to find it in the archives. Mine was Raymarine and installed
> at the factory and has worked flawlessly. They glassed a shelf unit for the
> drive on the SB side and cut the rudder tube and glassed a gusset or two to
> attach the drive arm. I am sure whoever retrofitted theirs will chime in. I
> will look for my pictures and PM them to you or take more if necessary.
> It's a neat solid weatherproof installation.
> Len Mitchell
> S/V Crazy Legs
> 1989 37+
> Midland On.
>
>
> Sent from my mobile device.
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Underdeck autopilot 37+

[Joe Macdonald via CnC-List]

Nice Work!!  Love it..
Is there any water from the lower rudder bearing entering the boat in big seas?
Thank you
joemac

Sent from Mail for Windows 10

From: Gary Russell via CnC-List
Sent: Monday, September 3, 2018 10:57 AM
To: C&C List
Cc: Gary Russell
Subject: Re: Stus-List Underdeck autopilot 37+

I designed what I think is a solid platform for the drive unit that puts almost 
no stress on the hull.  See pictures here.

Gary
S/V Kaylarah (formerly High Maintenance)
'90 C&C 37+
East Greenwich, RI, USA

~~~_/)~~


On Sun, Sep 2, 2018 at 11:30 AM Len Mitchell via CnC-List 
 wrote:
Joe, there was quite a discussion on this subject maybe a year ago and you 
should be able to find it in the archives. Mine was Raymarine and installed at 
the factory and has worked flawlessly. They glassed a shelf unit for the drive 
on the SB side and cut the rudder tube and glassed a gusset or two to attach 
the drive arm. I am sure whoever retrofitted theirs will chime in. I will look 
for my pictures and PM them to you or take more if necessary. It's a neat solid 
weatherproof installation. 
Len Mitchell
S/V Crazy Legs
1989 37+
Midland On. 


Sent from my mobile device. 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Underdeck autopilot 37+

[Gary Russell via CnC-List]

I designed what I think is a solid platform for the drive unit that puts
almost no stress on the hull.  See pictures here

.

Gary
S/V Kaylarah (formerly High Maintenance)
'90 C&C 37+
East Greenwich, RI, USA
~~~_/)~~



On Sun, Sep 2, 2018 at 11:30 AM Len Mitchell via CnC-List <
cnc-list@cnc-list.com> wrote:

> Joe, there was quite a discussion on this subject maybe a year ago and you
> should be able to find it in the archives. Mine was Raymarine and installed
> at the factory and has worked flawlessly. They glassed a shelf unit for the
> drive on the SB side and cut the rudder tube and glassed a gusset or two to
> attach the drive arm. I am sure whoever retrofitted theirs will chime in. I
> will look for my pictures and PM them to you or take more if necessary.
> It's a neat solid weatherproof installation.
> Len Mitchell
> S/V Crazy Legs
> 1989 37+
> Midland On.
>
>
> Sent from my mobile device.
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray