Stus-List Re: Fwd: Thru-hull removal

[Lisle Kingery, PhD via CnC-List]

Maybe an option?

https://m.youtube.com/watch?v=lx_Zu9sW_Qk

Lisle


On Sun, Apr 11, 2021 at 8:53 PM Juliano Franz via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> Hello everyone,
> I am in the process of changing the seacocks and thru-hulls on my new to
> me C
>
> Everything was seized up and I opted to grind the mushrooms out and hammer
> the thru-hulls from the outside. Everything went great until the last one
> (of course)... It is a bit different than the other two i've removed and it
> doesn't move at all!.
>
> Any suggestions on how to remove it? Photos form the inside and outside:
> https://dalu-my.sharepoint.com/:u:/g/personal/jl844105_dal_ca/EY0hyGnRu9BEpEK_sZgN1GgBvFIfKUvmMtXt7ET_ewNuZg?e=jStgny
>
> Cheers!
> Juliano
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Fwd: Thru-hull removal

[Len Mitchell via CnC-List]

I think I would get a long blade in my sawzall and put a couple cuts in it from 
the outside or put a 18 or 24 inch pipe wrench on it inside and give it a twist 
or both. Good luck. Len
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Fwd: Thru-hull removal

[ed vanderkruk via CnC-List]

I had the same problem. I eventually used a sawzall and made 3 or 4 cuts in
the walls of the thruhull from below. Then I just cracked the thruhull,
collapsing it and pulled it out.



Ed

On Sun., Apr. 11, 2021, 8:52 p.m. Juliano Franz via CnC-List <
cnc-list@cnc-list.com> wrote:

>
> Hello everyone,
> I am in the process of changing the seacocks and thru-hulls on my new to
> me C
>
> Everything was seized up and I opted to grind the mushrooms out and hammer
> the thru-hulls from the outside. Everything went great until the last one
> (of course)... It is a bit different than the other two i've removed and it
> doesn't move at all!.
>
> Any suggestions on how to remove it? Photos form the inside and outside:
> https://dalu-my.sharepoint.com/:u:/g/personal/jl844105_dal_ca/EY0hyGnRu9BEpEK_sZgN1GgBvFIfKUvmMtXt7ET_ewNuZg?e=jStgny
>
> Cheers!
> Juliano
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Fwd: Thru-hull removal

[Juliano Franz via CnC-List]

Hello everyone,
I am in the process of changing the seacocks and thru-hulls on my new to me
C

Everything was seized up and I opted to grind the mushrooms out and hammer
the thru-hulls from the outside. Everything went great until the last one
(of course)... It is a bit different than the other two i've removed and it
doesn't move at all!.

Any suggestions on how to remove it? Photos form the inside and outside:
https://dalu-my.sharepoint.com/:u:/g/personal/jl844105_dal_ca/EY0hyGnRu9BEpEK_sZgN1GgBvFIfKUvmMtXt7ET_ewNuZg?e=jStgny

Cheers!
Juliano
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Danny Haughey via CnC-List]

3 things you need for an internal combustion engine to run. 
SparkCompressionFuel. Check for spark at the plugsUsually , when I had trouble 
with my atomic 4, on my previous boat, it was usually the carburetor.  I had 3 
and kept 1 rebuilt on board, 1 at home either awaiting rebuild or rebuilt, and 
would swap them out.  The ethanol fuel would screw the carb up constantly...I 
also had a nagging problem with the wiring harnessAnother issue was making sure 
the timing was good but, it would usually fire even if it was off a little.  Do 
you have the mechanical fuel pump or the electric?  Has it been converted to 
electronic ignition?  Thanks, Danny
 Original message From: dwight veinot via CnC-List 
 Date: 4/11/21  7:05 PM  (GMT-05:00) To: Stus-List 
 Cc: dwight veinot  Subject: 
Stus-List Re: Atomic 4 trouble shootings Check the points and make sure the gap 
is set rightOn Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List 
 wrote:Good afternoon gentlemen Does anyone have done a 
overhaul on the atomic 4  I’m trying to start this engine and getting 
frustrated of getting no results I’ve been following the Moyer marine video and 
still no luck Here what I did New spark plug and rotor New dc wiringNew starter 
There spark at the coilI tried many times to do the dead center alignment 
assuming the engine was rebuilt according to universal specs New dip stickI’m I 
missing something I’ve tried gaz in the spark plug hole Results oil and gaz 
shoots out at the flame aresstor Give me a call or text 905 818-1336-- Joel 
Delamirande
www.jdroofing.ca
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Sent 
from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Joel Delamirande via CnC-List]

For now there no compression sadly

On Sun, Apr 11, 2021 at 7:06 PM dwight veinot via CnC-List <
cnc-list@cnc-list.com> wrote:

> Check the points and make sure the gap is set right
>
> On Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Good afternoon gentlemen
>> Does anyone have done a overhaul on the atomic 4
>> I’m trying to start this engine and getting frustrated of getting no
>> results
>> I’ve been following the Moyer marine video and still no luck
>> Here what I did
>> New spark plug and rotor
>> New dc wiring
>> New starter
>> There spark at the coil
>> I tried many times to do the dead center alignment assuming the engine
>> was rebuilt according to universal specs
>> New dip stick
>> I’m I missing something
>> I’ve tried gaz in the spark plug hole
>> Results oil and gaz shoots out at the flame aresstor
>> Give me a call or text 905 818-1336
>>
> --
>> Joel Delamirande
>> *www.jdroofing.ca *
>>
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> Thanks - Stu
>
> --
> Sent from Gmail Mobile
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu

-- 
Joel Delamirande
*www.jdroofing.ca *
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Paul Fountain via CnC-List]

And condenser ...
 Almost forgot

Paul

From: dwight veinot via CnC-List 
Sent: Sunday, April 11, 2021 7:05:41 PM
To: Stus-List 
Cc: dwight veinot 
Subject: Stus-List Re: Atomic 4 trouble shootings

Check the points and make sure the gap is set right

On Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Good afternoon gentlemen
Does anyone have done a overhaul on the atomic 4
I’m trying to start this engine and getting frustrated of getting no results
I’ve been following the Moyer marine video and still no luck
Here what I did
New spark plug and rotor
New dc wiring
New starter
There spark at the coil
I tried many times to do the dead center alignment assuming the engine was 
rebuilt according to universal specs
New dip stick
I’m I missing something
I’ve tried gaz in the spark plug hole
Results oil and gaz shoots out at the flame aresstor
Give me a call or text 905 818-1336
--
Joel Delamirande
[https://drive.google.com/uc?id=0Bzdvlj_zFQR9UUZyRjFCM0FGejZXeGd5WFVnVTZRb0Y0Q1lZ=download]
www.jdroofing.ca

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
--
Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[dwight veinot via CnC-List]

Check the points and make sure the gap is set right

On Sun, Apr 11, 2021 at 3:36 PM Joel Delamirande via CnC-List <
cnc-list@cnc-list.com> wrote:

> Good afternoon gentlemen
> Does anyone have done a overhaul on the atomic 4
> I’m trying to start this engine and getting frustrated of getting no
> results
> I’ve been following the Moyer marine video and still no luck
> Here what I did
> New spark plug and rotor
> New dc wiring
> New starter
> There spark at the coil
> I tried many times to do the dead center alignment assuming the engine was
> rebuilt according to universal specs
> New dip stick
> I’m I missing something
> I’ve tried gaz in the spark plug hole
> Results oil and gaz shoots out at the flame aresstor
> Give me a call or text 905 818-1336
> --
> Joel Delamirande
> *www.jdroofing.ca *
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu

-- 
Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Sylvain Laplante via CnC-List]

 Was it completely overhauled ( camshaft removed ) ?  looks like an issue with 
spark at the wrong time ( if there is spark at the plugs, not only the coil 
).Make sure the distributor is correctly installed for the firing order ( 
1-4-3-2 I think ).At TDC on the crank/flywheel and both valves closed, points 
should just start to open.Depends what's changed since it was running...

On Sunday, April 11, 2021, 2:36:17 PM EDT, Joel Delamirande via CnC-List 
 wrote:  
 
 Good afternoon gentlemen Does anyone have done a overhaul on the atomic 4  I’m 
trying to start this engine and getting frustrated of getting no results I’ve 
been following the Moyer marine video and still no luck Here what I did New 
spark plug and rotor New dc wiringNew starter There spark at the coilI tried 
many times to do the dead center alignment assuming the engine was rebuilt 
according to universal specs New dip stickI’m I missing something I’ve tried 
gaz in the spark plug hole Results oil and gaz shoots out at the flame aresstor 
Give me a call or text 905 818-1336-- 
Joel Delamirandewww.jdroofing.ca
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray  Thanks - Stu  Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Paul Fountain via CnC-List]

>From my A4 days ( 20 years ago) Check your points and cap . . . Then coil . .  
>If you don’t an have electronic ignition.



Paul

From: Joel Delamirande via CnC-List 
Sent: Sunday, April 11, 2021 2:35:48 PM
To: Stus-List 
Cc: Joel Delamirande 
Subject: Stus-List Atomic 4 trouble shootings

Good afternoon gentlemen
Does anyone have done a overhaul on the atomic 4
I’m trying to start this engine and getting frustrated of getting no results
I’ve been following the Moyer marine video and still no luck
Here what I did
New spark plug and rotor
New dc wiring
New starter
There spark at the coil
I tried many times to do the dead center alignment assuming the engine was 
rebuilt according to universal specs
New dip stick
I’m I missing something
I’ve tried gaz in the spark plug hole
Results oil and gaz shoots out at the flame aresstor
Give me a call or text 905 818-1336
--
Joel Delamirande
[https://drive.google.com/uc?id=0Bzdvlj_zFQR9UUZyRjFCM0FGejZXeGd5WFVnVTZRb0Y0Q1lZ=download]
www.jdroofing.ca

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Atomic 4 trouble shootings

[Martin DeYoung via CnC-List]

If my memories from working on cars in the shade of a tree are accurate, oil 
and gas shooting out the flame arrester may indicate a valve/ignition timing 
problem.

Martin DeYoung
Calypso
1971 C 43
Seattle/Port Ludlow

On Apr 11, 2021, at 11:36 AM, Joel Delamirande via CnC-List 
 wrote:

Good afternoon gentlemen
Does anyone have done a overhaul on the atomic 4
I’m trying to start this engine and getting frustrated of getting no results
I’ve been following the Moyer marine video and still no luck
Here what I did
New spark plug and rotor
New dc wiring
New starter
There spark at the coil
I tried many times to do the dead center alignment assuming the engine was 
rebuilt according to universal specs
New dip stick
I’m I missing something
I’ve tried gaz in the spark plug hole
Results oil and gaz shoots out at the flame aresstor
Give me a call or text 905 818-1336
--
Joel Delamirande
[https://drive.google.com/uc?id=0Bzdvlj_zFQR9UUZyRjFCM0FGejZXeGd5WFVnVTZRb0Y0Q1lZ=download]
www.jdroofing.ca

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Atomic 4 trouble shootings

[Joel Delamirande via CnC-List]

Good afternoon gentlemen
Does anyone have done a overhaul on the atomic 4
I’m trying to start this engine and getting frustrated of getting no
results
I’ve been following the Moyer marine video and still no luck
Here what I did
New spark plug and rotor
New dc wiring
New starter
There spark at the coil
I tried many times to do the dead center alignment assuming the engine was
rebuilt according to universal specs
New dip stick
I’m I missing something
I’ve tried gaz in the spark plug hole
Results oil and gaz shoots out at the flame aresstor
Give me a call or text 905 818-1336
-- 
Joel Delamirande
*www.jdroofing.ca *
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Information

[Andrew Burton via CnC-List]

Can you find them? Yes. That’s how I got my Baltic 47. Check the Mass Maritime 
site. 
If you buy a donated boat, prepare to roll up your sleeves and do some serious 
work on it. 
Andy


Andrew Burton
26 Beacon Hill
Newport, RI 
USA 02840

+401 965 5260
https://sites.google.com/site/andrewburtonyachtservices/



> On Apr 11, 2021, at 14:00, Joel Delamirande via CnC-List 
>  wrote:
> 
> 
> 
> Can I get a donation boat 40 feet
>> On Sun, Apr 11, 2021 at 1:32 PM Don Kern via CnC-List 
>>  wrote:
>> Ted,
>> 
>> Magic Dragon (HIN: ZCC40117M81F) was a USCG documented vessel # 637267 which 
>> had it's last Certificate of Document (COD) issued in 1999.  You should be 
>> able to get a copy of the original documentation from  USCG's National 
>> Vessel Documentation Center < 
>> https://www.dco.uscg.mil/Our-Organization/Deputy-for-Operations-Policy-and-Capabilities-DCO-D/National-Vessel-Documentation-Center/
>>  >  To do so apply for an "Abstract of Title" (CG-1332) for $25.00 and it 
>> will provide the original seller, owner(s) and home port(s) up to 1999.  Can 
>> you provide me with her current name, home berth and Yacht Club ?
>> Hope this helps.
>> 
>> Don Kern
>> Fireball, C Mk2
>> Bristol, RI
>> 
>> On 4/9/2021 8:33 AM, ted_relinda--- via CnC-List wrote:
>>> We are hoping that maybe there is a  member who remembers our vessel.  She 
>>> is a 1981 C 40-2 hull # 117. We believe she was manufactured under the 
>>> name of Magic Dragon, due to the location of name on build parts. We 
>>> aquired her when she was donated  to our local sailing center. There was no 
>>> paperwork other than the owners manual with her and a receipt for 
>>> batteries.  There is an indication that she was in the NE area possibly New 
>>> Jersey. Any information on her that we can get would be greatly 
>>> appreciated.  Thank you-. Relinda
>>> 
>>> Sent from Yahoo Mail on Android
>>> 
>>> 
>>> Thanks to all of the subscribers that contributed to the list to help with 
>>> the costs involved.  If you want to show your support to the list - use 
>>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>>> Stu
>> 
>> Thanks to all of the subscribers that contributed to the list to help with 
>> the costs involved.  If you want to show your support to the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>> Stu
> -- 
> Joel Delamirande
> 
> www.jdroofing.ca
> 
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Information

[Joel Delamirande via CnC-List]

Can I get a donation boat 40 feet
On Sun, Apr 11, 2021 at 1:32 PM Don Kern via CnC-List 
wrote:

> Ted,
>
> Magic Dragon (HIN: ZCC40117M81F) was a USCG documented vessel # 637267
> which had it's last Certificate of Document (COD) issued in 1999.  You
> should be able to get a copy of the original documentation from  USCG's
> National Vessel Documentation Center <
> https://www.dco.uscg.mil/Our-Organization/Deputy-for-Operations-Policy-and-Capabilities-DCO-D/National-Vessel-Documentation-Center/
> >
> 
> To do so apply for an "Abstract of Title" (CG-1332) for $25.00 and it will
> provide the original seller, owner(s) and home port(s) up to 1999.  Can you
> provide me with her current name, home berth and Yacht Club ?
> Hope this helps.
>
> Don Kern
> *Fireball*, C Mk2
> Bristol, RI
>
> On 4/9/2021 8:33 AM, ted_relinda--- via CnC-List wrote:
>
> We are hoping that maybe there is a  member who remembers our vessel.  She
> is a 1981 C 40-2 hull # 117. We believe she was manufactured under the
> name of Magic Dragon, due to the location of name on build parts. We
> aquired her when she was donated  to our local sailing center. There was no
> paperwork other than the owners manual with her and a receipt for
> batteries.  There is an indication that she was in the NE area possibly New
> Jersey. Any information on her that we can get would be greatly
> appreciated.  Thank you-. Relinda
>
> Sent from Yahoo Mail on Android
> 
>
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
>
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu

-- 
Joel Delamirande
*www.jdroofing.ca *
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Information

[David Risch via CnC-List]

Relinda I have had hull # 121 for 15 years.  Do reach out if you have specific 
questions.

Sent from my Android. Please forgive typos. Thank you.


From: Don Kern via CnC-List 
Sent: Sunday, April 11, 2021 1:29:02 PM
To: ted_relinda--- via CnC-List ; ted_reli...@yahoo.com 

Cc: Don Kern 
Subject: Stus-List Re: Information

Ted,

Magic Dragon (HIN: ZCC40117M81F) was a USCG documented vessel # 637267 which 
had it's last Certificate of Document (COD) issued in 1999.  You should be able 
to get a copy of the original documentation from  USCG's National Vessel 
Documentation Center < 
https://www.dco.uscg.mil/Our-Organization/Deputy-for-Operations-Policy-and-Capabilities-DCO-D/National-Vessel-Documentation-Center/
 
>
  To do so apply for an "Abstract of Title" (CG-1332) for $25.00 and it will 
provide the original seller, owner(s) and home port(s) up to 1999.  Can you 
provide me with her current name, home berth and Yacht Club ?
Hope this helps.

Don Kern
Fireball, C Mk2
Bristol, RI

On 4/9/2021 8:33 AM, ted_relinda--- via CnC-List wrote:
We are hoping that maybe there is a  member who remembers our vessel.  She is a 
1981 C 40-2 hull # 117. We believe she was manufactured under the name of 
Magic Dragon, due to the location of name on build parts. We aquired her when 
she was donated  to our local sailing center. There was no paperwork other than 
the owners manual with her and a receipt for batteries.  There is an indication 
that she was in the NE area possibly New Jersey. Any information on her that we 
can get would be greatly appreciated.  Thank you-. Relinda

Sent from Yahoo Mail on 
Android



Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   
https://www.paypal.me/stumurray
  Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Information

[Don Kern via CnC-List]

Ted,

Magic Dragon (HIN: ZCC40117M81F) was a USCG documented vessel # 637267 
which had it's last Certificate of Document (COD) issued in 1999.  You 
should be able to get a copy of the original documentation from  USCG's 
National Vessel Documentation Center < 
https://www.dco.uscg.mil/Our-Organization/Deputy-for-Operations-Policy-and-Capabilities-DCO-D/National-Vessel-Documentation-Center/ 
>  To do so apply for an "Abstract of Title" (CG-1332) for $25.00 and 
it will provide the original seller, owner(s) and home port(s) up to 
1999.  Can you provide me with her current name, home berth and Yacht Club ?

Hope this helps.

Don Kern
/Fireball/, C Mk2
Bristol, RI

On 4/9/2021 8:33 AM, ted_relinda--- via CnC-List wrote:
We are hoping that maybe there is a  member who remembers our vessel.  
She is a 1981 C 40-2 hull # 117. We believe she was manufactured 
under the name of Magic Dragon, due to the location of name on build 
parts. We aquired her when she was donated  to our local sailing 
center. There was no paperwork other than the owners manual with her 
and a receipt for batteries.  There is an indication that she was in 
the NE area possibly New Jersey. Any information on her that we can 
get would be greatly appreciated. Thank you-. Relinda


Sent from Yahoo Mail on Android 



Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Red Jacket video tonight with Rob Mazza

[CHARLES SCHEAFFER via CnC-List]

FWIW, I watched the video from the link regarding Red Jacket for free and just 
sent a small donation to help with scanning the C plans.

C

> On 04/11/2021 11:04 AM Debbie Jeffcoatt via CnC-List 
>  wrote:
>  
>  
> I purchased a ticket for $5.00 and the museum sent me the link.
>  
> 
> https://www.canadahelps.org/en/charities/marine-museum-of-the-great-lakes-at-kingston/events/rob-mazza/
> 
> On Sat, Apr 10, 2021 at 5:06 PM David Risch via CnC-List < 
> cnc-list@cnc-list.com mailto:cnc-list@cnc-list.com > wrote:
> 
> > > 
> > Has anybody found the recording link?   Thanks in advance.
> > 
> >  
> > 
> > From: Shawn Wright via CnC-List  > mailto:cnc-list@cnc-list.com >
> > Sent: Wednesday, April 7, 2021 1:28 PM
> > To: Stus-List mailto:cnc-list@cnc-list.com >
> > Cc: Shawn Wright  > mailto:shawngwri...@gmail.com >
> > Subject: Stus-List Red Jacket video tonight with Rob Mazza
> > 
> >  
> > 
> > Not sure if this was mentioned here, but I saw it on the FB group, 
> > and just registered. They will have a recording link if you're unable to 
> > view it live. (7pm EDT)
> > 
> >  
> > 
> > 
> > https://www.canadahelps.org/en/charities/marine-museum-of-the-great-lakes-at-kingston/events/rob-mazza/
> >  
> > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.canadahelps.org%2Fen%2Fcharities%2Fmarine-museum-of-the-great-lakes-at-kingston%2Fevents%2Frob-mazza%2F=04%7C01%7C%7C6c79d765fc9049a196bb08d8f9ea8a6f%7C84df9e7fe9f640afb435%7C1%7C0%7C637534133022831339%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=8IT8RP2wa31Pk1%2FilCypdjcK4T%2Fk0PIuNkm5EkiYXFE%3D=0
> > 
> >  
> > 
> > 
> > --
> > 
> > Shawn Wright
> > 
> > shawngwri...@gmail.com mailto:shawngwri...@gmail.com
> > 
> > S/V Callisto, 1974 C 35
> > 
> > https://www.facebook.com/SVCallisto 
> > https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.facebook.com%2FSVCallisto=04%7C01%7C%7C6c79d765fc9049a196bb08d8f9ea8a6f%7C84df9e7fe9f640afb435%7C1%7C0%7C637534133022841327%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=5YkCOhTB2x7533MzElPKB%2BQ302K%2F%2FuvykvB2WtSyn70%3D=0
> > 
> > Thanks to all of the subscribers that contributed to the list to 
> > help with the costs involved.  If you want to show your support to the list 
> > - use PayPal to send contribution --https://www.paypal.me/stumurray  
> > Thanks - Stu
> > 
> > > 
> 
> --
> Debbie Jeffcoatt
> cell 416-251-2650
> Thanks to all of the subscribers that contributed to the list to help 
> with the costs involved. If you want to show your support to the list - use 
> PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
> 
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Red Jacket video tonight with Rob Mazza

[Debbie Jeffcoatt via CnC-List]

I purchased a ticket for $5.00 and the museum sent me the link.

https://www.canadahelps.org/en/charities/marine-museum-of-the-great-lakes-at-kingston/events/rob-mazza/

On Sat, Apr 10, 2021 at 5:06 PM David Risch via CnC-List <
cnc-list@cnc-list.com> wrote:

> Has anybody found the recording link?   Thanks in advance.
>
>
>
> *From:* Shawn Wright via CnC-List 
> *Sent:* Wednesday, April 7, 2021 1:28 PM
> *To:* Stus-List 
> *Cc:* Shawn Wright 
> *Subject:* Stus-List Red Jacket video tonight with Rob Mazza
>
>
>
> Not sure if this was mentioned here, but I saw it on the FB group, and
> just registered. They will have a recording link if you're unable to view
> it live. (7pm EDT)
>
>
>
>
> https://www.canadahelps.org/en/charities/marine-museum-of-the-great-lakes-at-kingston/events/rob-mazza/
> 
>
>
>
>
> --
>
> Shawn Wright
>
> shawngwri...@gmail.com
>
> S/V Callisto, 1974 C 35
>
> https://www.facebook.com/SVCallisto
> 
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu



-- 
Debbie Jeffcoatt
cell 416-251-2650
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu