Re: Stus-List Barient 28 two speed self tailing winch bearings (My Address)
Allen, Forgot to send you my address so here it is: Glenn Gambel 5730 Oak Tree Lane Whitehall, Michigan 49461, USA cell number 231-286-7760 should you need it. Thanks again, Glenn Gambel -- Original Message -- From: "Ken Heaton via CnC-List" To: "cnc-list" Cc: "Ken Heaton" Sent: 7/4/2018 5:46:30 PM Subject: Re: Stus-List Barient 28 two speed self tailing winch bearings I'll second Arco winches in Australia. Great service and they sip quickly if they have the part. They have most bearings for Barient winches.. THE AUSTRALIAN YACHT WINCH PTY. LTD. PO Box 401 Galston N.S.W. 2159 Australia Phone: +61 2 9653 2111 Fax: +61 2 9653 3119 Email: sa...@huttonwinches.com All prices quoted on this site, unless otherwise specified, are in US dollars. http://www.arco-winches.com/products/spares They return emails quickly. Ken H. On Wed, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List wrote: I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been putting the project off for a while. I did not think I would run into many problems, and that was a mistake. I did, but won't go into those now. Suffice to say, I did get the winch apart and was cleaning the parts and organizing them for reassembly, and discovered that one of the bearing had separated. Though I recovered all of the parts and have them, I think reassembly may be very difficult, and even if I could reassemble the thing, I suspect that it may not hold together once the winch is operated, especially under load. Does any one know where I might order new bearing or find new bearings for my Barient 28 two speed self tailing winch? Any idea or help would be appreciated. I would get the part number, but have to figure that out. Sincerely, Glenn Gambel Wind N Spirits C 36 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Barient 28 two speed self tailing winch bearings
Attention Listers, I followed the advice of contacting Allen Hutton at sa...@huttonwinches.com via e-mail. I sent Allen the dimensions of the needle bearing that I needed to repair my Barient 28 ST winch. He told me that he had the bearings, gave me the part number and I ordered two of them this evening, supplying my credit card in a fairly secure way and they will be shipped to be via insured mail. What great customer service. I highly recommend this company and Allen. Though everyone should know. Glenn Gambel Wind N Spirits 1981 C 36 -- Original Message -- From: "Ken Heaton via CnC-List" To: "cnc-list" Cc: "Ken Heaton" Sent: 7/4/2018 5:46:30 PM Subject: Re: Stus-List Barient 28 two speed self tailing winch bearings I'll second Arco winches in Australia. Great service and they sip quickly if they have the part. They have most bearings for Barient winches.. THE AUSTRALIAN YACHT WINCH PTY. LTD. PO Box 401 Galston N.S.W. 2159 Australia Phone: +61 2 9653 2111 Fax: +61 2 9653 3119 Email: sa...@huttonwinches.com All prices quoted on this site, unless otherwise specified, are in US dollars. http://www.arco-winches.com/products/spares They return emails quickly. Ken H. On Wed, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List wrote: I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been putting the project off for a while. I did not think I would run into many problems, and that was a mistake. I did, but won't go into those now. Suffice to say, I did get the winch apart and was cleaning the parts and organizing them for reassembly, and discovered that one of the bearing had separated. Though I recovered all of the parts and have them, I think reassembly may be very difficult, and even if I could reassemble the thing, I suspect that it may not hold together once the winch is operated, especially under load. Does any one know where I might order new bearing or find new bearings for my Barient 28 two speed self tailing winch? Any idea or help would be appreciated. I would get the part number, but have to figure that out. Sincerely, Glenn Gambel Wind N Spirits C 36 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Barient 28 two speed self tailing winch bearings
I'll second Arco winches in Australia. Great service and they sip quickly if they have the part. They have most bearings for Barient winches.. THE AUSTRALIAN YACHT WINCH PTY. LTD. PO Box 401 Galston N.S.W. 2159 Australia Phone: +61 2 9653 2111 Fax: +61 2 9653 3119 Email: sa...@huttonwinches.com All prices quoted on this site, unless otherwise specified, are in US dollars. http://www.arco-winches.com/products/spares They return emails quickly. Ken H. On Wed, 4 Jul 2018 at 17:42, Glenn Gambel via CnC-List < cnc-list@cnc-list.com> wrote: > > I decided to clean my Barient 28 two speed self tailing winches today. It > was sunny and nice and I had been putting the project off for a while. I > did not think I would run into many problems, and that was a mistake. I > did, but won't go into those now. Suffice to say, I did get the winch > apart and was cleaning the parts and organizing them for reassembly, and > discovered that one of the bearing had separated. Though I recovered all > of the parts and have them, I think reassembly may be very difficult, and > even if I could reassemble the thing, I suspect that it may not hold > together once the winch is operated, especially under load. > > Does any one know where I might order new bearing or find new bearings for > my Barient 28 two speed self tailing winch? Any idea or help would be > appreciated. I would get the part number, but have to figure that out. > > Sincerely, > Glenn Gambel > Wind N Spirits > C 36 > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Barient 28 two speed self tailing winch bearings
Try taking it’s mate to a bearing supply and see if they can match it. Sent from my iPhone On Jul 4, 2018, at 4:42 PM, Glenn Gambel via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been putting the project off for a while. I did not think I would run into many problems, and that was a mistake. I did, but won't go into those now. Suffice to say, I did get the winch apart and was cleaning the parts and organizing them for reassembly, and discovered that one of the bearing had separated. Though I recovered all of the parts and have them, I think reassembly may be very difficult, and even if I could reassemble the thing, I suspect that it may not hold together once the winch is operated, especially under load. Does any one know where I might order new bearing or find new bearings for my Barient 28 two speed self tailing winch? Any idea or help would be appreciated. I would get the part number, but have to figure that out. Sincerely, Glenn Gambel Wind N Spirits C 36 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Barient 28 two speed self tailing winch bearings
I have a pair of barient 28s I’ll sell you to use for parts Get Outlook for iOS On Wed, Jul 4, 2018 at 3:44 PM -0500, "Glenn Gambel via CnC-List" wrote: I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been putting the project off for a while. I did not think I would run into many problems, and that was a mistake. I did, but won't go into those now. Suffice to say, I did get the winch apart and was cleaning the parts and organizing them for reassembly, and discovered that one of the bearing had separated. Though I recovered all of the parts and have them, I think reassembly may be very difficult, and even if I could reassemble the thing, I suspect that it may not hold together once the winch is operated, especially under load. Does any one know where I might order new bearing or find new bearings for my Barient 28 two speed self tailing winch? Any idea or help would be appreciated. I would get the part number, but have to figure that out. Sincerely,Glenn GambelWind N SpiritsC 36 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Barient 28 two speed self tailing winch bearings
Arco winches in Australia. Joel On Wed, Jul 4, 2018 at 4:42 PM Glenn Gambel via CnC-List < cnc-list@cnc-list.com> wrote: > > I decided to clean my Barient 28 two speed self tailing winches today. It > was sunny and nice and I had been putting the project off for a while. I > did not think I would run into many problems, and that was a mistake. I > did, but won't go into those now. Suffice to say, I did get the winch > apart and was cleaning the parts and organizing them for reassembly, and > discovered that one of the bearing had separated. Though I recovered all > of the parts and have them, I think reassembly may be very difficult, and > even if I could reassemble the thing, I suspect that it may not hold > together once the winch is operated, especially under load. > > Does any one know where I might order new bearing or find new bearings for > my Barient 28 two speed self tailing winch? Any idea or help would be > appreciated. I would get the part number, but have to figure that out. > > Sincerely, > Glenn Gambel > Wind N Spirits > C 36 > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Joel 301 541 8551 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Barient 28 two speed self tailing winch bearings
I decided to clean my Barient 28 two speed self tailing winches today. It was sunny and nice and I had been putting the project off for a while. I did not think I would run into many problems, and that was a mistake. I did, but won't go into those now. Suffice to say, I did get the winch apart and was cleaning the parts and organizing them for reassembly, and discovered that one of the bearing had separated. Though I recovered all of the parts and have them, I think reassembly may be very difficult, and even if I could reassemble the thing, I suspect that it may not hold together once the winch is operated, especially under load. Does any one know where I might order new bearing or find new bearings for my Barient 28 two speed self tailing winch? Any idea or help would be appreciated. I would get the part number, but have to figure that out. Sincerely, Glenn Gambel Wind N Spirits C 36___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray