Re: Stus-List Potable water fittings.
We also have this same Gardena 4 way Manifold. Ken H. On 28 May 2015 at 12:45, Kevin Driscoll via CnC-List cnc-list@cnc-list.com wrote: I have the same Gardenia 4 way manifold with the same labels on my 89 30-2. Must have come from the factory that way? On Thu, May 28, 2015 at 7:28 AM Mitchell's via CnC-List cnc-list@cnc-list.com wrote: Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that helps. (I converted the port side fresh water tank to a holding tank for the Great Lakes, we have lots of room with two holding tanks.) Tom, it hasn't been said yet, and you probably already know but there is a Quest compression fitting end that goes on the plastic pipe with a SS ring and you can tighten the nut down pretty tight! The nut squeaks all the way tight and will take quite a bit of abuse. The plumbing is not in the sunlight and will last decades. If I was going to change it up and had a pile of spare cash to burn, I would go Pex too. They can use a two wrench snug but not very often. RVs have been using it forever too. Len Crazy Legs 1989 37+ Sent from my mobile device.___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Stus-List Potable water fittings.
Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that helps. (I converted the port side fresh water tank to a holding tank for the Great Lakes, we have lots of room with two holding tanks.) Tom, it hasn't been said yet, and you probably already know but there is a Quest compression fitting end that goes on the plastic pipe with a SS ring and you can tighten the nut down pretty tight! The nut squeaks all the way tight and will take quite a bit of abuse. The plumbing is not in the sunlight and will last decades. If I was going to change it up and had a pile of spare cash to burn, I would go Pex too. They can use a two wrench snug but not very often. RVs have been using it forever too. Len Crazy Legs 1989 37+ Sent from my mobile device.___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Potable water fittings.
Thanks Len and Kevin, I looked at their website and it looks like they redesigned the 4 to 1 manifold a little. It also looks like the fittings are still garden hose fittings. Maybe the Gilmore I have just needs to have adapters. Josh On May 28, 2015 10:28 AM, Mitchell's via CnC-List cnc-list@cnc-list.com wrote: Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that helps. (I converted the port side fresh water tank to a holding tank for the Great Lakes, we have lots of room with two holding tanks.) Tom, it hasn't been said yet, and you probably already know but there is a Quest compression fitting end that goes on the plastic pipe with a SS ring and you can tighten the nut down pretty tight! The nut squeaks all the way tight and will take quite a bit of abuse. The plumbing is not in the sunlight and will last decades. If I was going to change it up and had a pile of spare cash to burn, I would go Pex too. They can use a two wrench snug but not very often. RVs have been using it forever too. Len Crazy Legs 1989 37+ Sent from my mobile device. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Potable water fittings.
I have the same Gardenia 4 way manifold with the same labels on my 89 30-2. Must have come from the factory that way? On Thu, May 28, 2015 at 7:28 AM Mitchell's via CnC-List cnc-list@cnc-list.com wrote: Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that helps. (I converted the port side fresh water tank to a holding tank for the Great Lakes, we have lots of room with two holding tanks.) Tom, it hasn't been said yet, and you probably already know but there is a Quest compression fitting end that goes on the plastic pipe with a SS ring and you can tighten the nut down pretty tight! The nut squeaks all the way tight and will take quite a bit of abuse. The plumbing is not in the sunlight and will last decades. If I was going to change it up and had a pile of spare cash to burn, I would go Pex too. They can use a two wrench snug but not very often. RVs have been using it forever too. Len Crazy Legs 1989 37+ Sent from my mobile device.___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
