Re: Stus-List Replacement LED for circuit breaker panel?

2020-06-02 Thread ed vanderkruk via CnC-List 
This is in case anyone can make use of them... For the cost of shipping
they are yours to scavange parts.


Ed

On Tue., Jun. 2, 2020, 1:48 p.m. ed vanderkruk 
wrote:

> I have a couple of old surplus panels in case you want to salvage them.
> The 120v panel has individually installed lamps and the 12v panel has them
> mounted on a small circuit board.
>
> See photos in attached link.
>
> https://www.dropbox.com/sh/i7ckagftaq4ady5/AADsqlqYumU84JDHiijKp205a?dl=0
>
> Ed Vanderkruk
> Prime Interest
> Toronto, Canada
>
>
> On Fri., May 29, 2020, 1:57 p.m. ed vanderkruk 
> wrote:
>
>> I have an old panel at the boat locker I can check on the weekend to
>> scavange some lights.
>>
>>
>> Ed
>> Prime Interest
>> Toronto, Ontario
>>
>>
>> On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> I don't think indicator lights that old are LEDs. Try looking for non
>>> LED lights. The current draw is pretty low.
>>>
>>> Alan Bergen
>>> 35 Mk III Thirsty
>>> Rose City YC
>>> Portland, OR
>>>
>>> On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List <
>>> cnc-list@cnc-list.com> wrote:
>>>
 Hello all,

 Please see the link to look at my circuit breaker panel LED:  Circuit
 Breaker Panel 2.jpg
 

 Circuit Breaker Panel 2.jpg

 Shared with Dropbox

 

 The bottom one is broken.

 I tried ordering this one through Amazon, but it was too small:
 https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
 

 Does anyone know where I might find the right replacement?

 Thank you!

 Bruce Whitmore
 1994 C 37/40+ "Astralis"

 ___

 Thanks everyone for supporting this list with your contributions.  Each
 and every one is greatly appreciated.  If you want to support the list -
 use PayPal to send contribution --
 https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$

 ___
>>>
>>> Thanks everyone for supporting this list with your contributions.  Each
>>> and every one is greatly appreciated.  If you want to support the list -
>>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>>
>>>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-06-02 Thread ed vanderkruk via CnC-List 
I have a couple of old surplus panels in case you want to salvage them. The
120v panel has individually installed lamps and the 12v panel has them
mounted on a small circuit board.

See photos in attached link.

https://www.dropbox.com/sh/i7ckagftaq4ady5/AADsqlqYumU84JDHiijKp205a?dl=0

Ed Vanderkruk
Prime Interest
Toronto, Canada


On Fri., May 29, 2020, 1:57 p.m. ed vanderkruk 
wrote:

> I have an old panel at the boat locker I can check on the weekend to
> scavange some lights.
>
>
> Ed
> Prime Interest
> Toronto, Ontario
>
>
> On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> I don't think indicator lights that old are LEDs. Try looking for non LED
>> lights. The current draw is pretty low.
>>
>> Alan Bergen
>> 35 Mk III Thirsty
>> Rose City YC
>> Portland, OR
>>
>> On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> Hello all,
>>>
>>> Please see the link to look at my circuit breaker panel LED:  Circuit
>>> Breaker Panel 2.jpg
>>> 
>>>
>>> Circuit Breaker Panel 2.jpg
>>>
>>> Shared with Dropbox
>>>
>>> 
>>>
>>> The bottom one is broken.
>>>
>>> I tried ordering this one through Amazon, but it was too small:
>>> https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
>>> 
>>>
>>> Does anyone know where I might find the right replacement?
>>>
>>> Thank you!
>>>
>>> Bruce Whitmore
>>> 1994 C 37/40+ "Astralis"
>>>
>>> ___
>>>
>>> Thanks everyone for supporting this list with your contributions.  Each
>>> and every one is greatly appreciated.  If you want to support the list -
>>> use PayPal to send contribution --
>>> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$
>>>
>>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-30 Thread Doug Mountjoy via CnC-List 
I got my replacement Leds from Paneltronics. Theirs are a larger diameter than 
Blueseas. They fit the holes in my panels. Doug Mountjoysv Rebecca Leah C 
Landfall 39Port Orchard yacht club
 Original message From: John Conklin via CnC-List 
 Date: 5/30/20  19:32  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: John Conklin  Subject: Re: 
Stus-List Replacement LED for circuit breaker panel? 
I have a few out as well ! 

John Conklin 
S/V Halcyon
S/V Heartbeat
www.flirtingwithfire.com




On May 29, 2020, at 1:58 PM, ed vanderkruk via CnC-List  
wrote:





I have an old panel at the boat locker I can check on the weekend to scavange 
some lights. 




Ed
Prime Interest 
Toronto, Ontario 





On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List 
 wrote:



I don't think indicator lights that old are LEDs. Try looking for non LED 
lights. The current draw is pretty low.


Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR




On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List 
 wrote:





Hello all,


Please see the link to look at my circuit breaker panel LED:  
Circuit Breaker Panel 2.jpg









































Circuit Breaker Panel 2.jpg

Shared with Dropbox























The bottom one is broken.  



I tried ordering this one through Amazon, but it was too small:  
https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1


Does anyone know where I might find the right replacement?


Thank you!



Bruce Whitmore
1994 C 37/40+ "Astralis"





___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-30 Thread John Conklin via CnC-List 
I have a few out as well !

John Conklin
S/V Halcyon
S/V Heartbeat
www.flirtingwithfire.com


On May 29, 2020, at 1:58 PM, ed vanderkruk via CnC-List  
wrote:


I have an old panel at the boat locker I can check on the weekend to scavange 
some lights.


Ed
Prime Interest
Toronto, Ontario


On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
I don't think indicator lights that old are LEDs. Try looking for non LED 
lights. The current draw is pretty low.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR

On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
Hello all,

Please see the link to look at my circuit breaker panel LED:  Circuit Breaker 
Panel 
2.jpg


[https://s.yimg.com/nq/storm/assets/enhancrV2/23/logos/dropbox.png]
Circuit Breaker Panel 2.jpg

Shared with Dropbox

The bottom one is broken.

I tried ordering this one through Amazon, but it was too small:  
https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1

Does anyone know where I might find the right replacement?

Thank you!

Bruce Whitmore
1994 C 37/40+ "Astralis"

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-30 Thread Brian Davis via CnC-List 
Ahoy!

Check out marine_parts_source on Ebay. They have all of the Blue Sea
circuit breakers. I just ordered some and they are $14.99 each.

Make sure you disconnect your batteries before serving. ☺

Regards from South FL,

Brian

On Fri, May 29, 2020, 1:06 PM Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hello all,
>
> Please see the link to look at my circuit breaker panel LED:  Circuit
> Breaker Panel 2.jpg
> 
>
> Circuit Breaker Panel 2.jpg
>
> Shared with Dropbox
>
> 
>
> The bottom one is broken.
>
> I tried ordering this one through Amazon, but it was too small:
> https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
>
> Does anyone know where I might find the right replacement?
>
> Thank you!
>
> Bruce Whitmore
> 1994 C 37/40+ "Astralis"
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread Peter Fell via CnC-List 
Quite possible that they are LEDs at that age, and I can't see it being
anything other than 12V DC. My other hobby is vintage audio and LEDs were
used for indicator lights right back into the 70s. I was just working on a
Yamaha stereo receiver built in 1974 and it has a couple LEDs for power and
stereo FM indicators.

In most of the marine suppliers around here, you can buy Blue Sea
replacement panel LEDs and a couple other brands (Sea Dog perhaps?) already
set-up to run on 12V DC. I know the Blue Sea come with a 'holder' for the
bulb and come in different colours. I've used one or two when I'm out of
red LEDs or need one-off of some other funky colour for my audio projects!
Rather expensive way to do it though!

Most of the LEDs I use I go the lazy route, rather than assemble my own,
and buy off Amazon  pack of 50, prewired with pigtail and resistor for
$12 -$18,  and will run off about 8 to 15V. With the fixed resistors
intensity will vary with the voltage. Cheap LEDs, probably not the best
quality, but so far they've worked fine. The pigtails are ridiculously thin
wire - maybe 28 gauge (but then again so is the wire on the larger red LED
I picked up in a marine store for my compass light!).

Note that if you are replacing an indicator light for an AC panel then it
will run on 120V AC. Blue Sea sells separate LEDs for that, and there will
be 2 differences. 1st, the resister will be a higher value and 2nd they
will probably have something like a 1N4004 rectifier diode wired in, to
block reverse of the AC cycle. LEDs are diodes, but they aren't designed to
block a lot of reverse voltage ... they will break down fairly quickly.
There may also be a small capacitor in the circuit to reduce flicker (the
LED on AC is only lit 60-times a second ... you'll see it flicker if you
look indirectly at it).

For the DC application only the resistor is needed. However the LED will be
polarized, so test it before any soldering. If it doesn't light up, reverse
the connection. AC will work regardless of how you connect it.
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread Josh Muckley via CnC-List 
I have not investigated specifically for myself because they always looked
like standard through hole LEDs from the '80s.  As a kid I always did all
sorts of experiments with them.  The bare LEDs I played with were about
3/16ths and you could buy sockets for them too.  When I looked online just
now, I realize that they are sold in metric diameters.  Based on available
metric sizes I would guess that they are 5mm.

LED
https://images.app.goo.gl/y4kJTgfW5Ry1A55c9

Socket
https://images.app.goo.gl/nfJ8zeVRdhPAo2Ey8

Generally speaking, LEDs by themselves are designed to emit light between 1
and 3 volts.  Much higher than 3 and the LED will burn out.  It was common
to directly solder a resistor to one of the legs of the LED and sell the
combo as a "x.xx volt LED".  The resistor would come exposed or sometimes
heat shrinked to give a more finished look.

Calcs
https://www.evilmadscientist.com/2012/resistors-for-leds/

Armed with that info I think you can do a little disassembly to determine
exactly what you have and then order online.  Let me know if you get stuck.

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD

On Fri, May 29, 2020, 14:13 Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:

> Cool.  That would be great!
>
> Bruce Whitmore
>
> (847) 404-5092 (mobile)
> bwhitm...@sbcglobal.net
>
>
> On Friday, May 29, 2020, 1:58:28 PM EDT, ed vanderkruk via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>
> I have an old panel at the boat locker I can check on the weekend to
> scavange some lights.
>
>
> Ed
> Prime Interest
> Toronto, Ontario
>
>
> On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> I don't think indicator lights that old are LEDs. Try looking for non LED
> lights. The current draw is pretty low.
>
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
>
> On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Hello all,
>
> Please see the link to look at my circuit breaker panel LED:  Circuit
> Breaker Panel 2.jpg
> 
>
> Circuit Breaker Panel 2.jpg
>
> Shared with Dropbox
>
> 
>
> The bottom one is broken.
>
> I tried ordering this one through Amazon, but it was too small:
> https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
> 
>
> Does anyone know where I might find the right replacement?
>
> Thank you!
>
> Bruce Whitmore
> 1994 C 37/40+ "Astralis"
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --  https://www.paypal.me/stumurray
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread Bruce Whitmore via CnC-List 
Cool.  That would be great!

Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net
 

On Friday, May 29, 2020, 1:58:28 PM EDT, ed vanderkruk via CnC-List 
 wrote:  
 
 I have an old panel at the boat locker I can check on the weekend to scavange 
some lights. 

EdPrime Interest Toronto, Ontario 

On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List 
 wrote:

I don't think indicator lights that old are LEDs. Try looking for non LED 
lights. The current draw is pretty low.
Alan Bergen35 Mk III ThirstyRose City YCPortland, OR

On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List 
 wrote:

Hello all,
Please see the link to look at my circuit breaker panel LED:  Circuit Breaker 
Panel 2.jpg

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Circuit Breaker Panel 2.jpg

Shared with Dropbox
 |

 |

 |


The bottom one is broken.  

I tried ordering this one through Amazon, but it was too small:  
https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
Does anyone know where I might find the right replacement?
Thank you!

Bruce Whitmore
1994 C 37/40+ "Astralis"

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$
 


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread ed vanderkruk via CnC-List 
I have an old panel at the boat locker I can check on the weekend to
scavange some lights.


Ed
Prime Interest
Toronto, Ontario


On Fri., May 29, 2020, 1:45 p.m. ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:

> I don't think indicator lights that old are LEDs. Try looking for non LED
> lights. The current draw is pretty low.
>
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
>
> On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Hello all,
>>
>> Please see the link to look at my circuit breaker panel LED:  Circuit
>> Breaker Panel 2.jpg
>> 
>>
>> Circuit Breaker Panel 2.jpg
>>
>> Shared with Dropbox
>>
>> 
>>
>> The bottom one is broken.
>>
>> I tried ordering this one through Amazon, but it was too small:
>> https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
>> 
>>
>> Does anyone know where I might find the right replacement?
>>
>> Thank you!
>>
>> Bruce Whitmore
>> 1994 C 37/40+ "Astralis"
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --
>> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread ALAN BERGEN via CnC-List 
I don't think indicator lights that old are LEDs. Try looking for non LED
lights. The current draw is pretty low.

Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR

On Fri, May 29, 2020 at 10:06 AM Bruce Whitmore via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hello all,
>
> Please see the link to look at my circuit breaker panel LED:  Circuit
> Breaker Panel 2.jpg
> 
>
> Circuit Breaker Panel 2.jpg
>
> Shared with Dropbox
>
> 
>
> The bottom one is broken.
>
> I tried ordering this one through Amazon, but it was too small:
> https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
> 
>
> Does anyone know where I might find the right replacement?
>
> Thank you!
>
> Bruce Whitmore
> 1994 C 37/40+ "Astralis"
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://urldefense.com/v3/__https://www.paypal.me/stumurray__;!!LIr3w8kk_Xxm!4jZ9y_8AU00FroXuMoLYtL1bv_IcU2YWw7Tot9dkdiDzvGoJiKTUGLQhD2c0ygsp8bM$
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread Charlie Nelson via CnC-List 
Hey Bruce--
I had similar problems with several of my 25 year old panel indicator lights 
and could not find a physicallyl identical size
I eventually had them replaced with smaller Blue Sea indicators by an 
electrician who replaced all of them.I think he mounted them on another strip 
and mounted the strip behind the panels.
Charlie Nelson1995 C 36 XL/kcb Water Phantom


-Original Message-
From: Bruce Whitmore via CnC-List 
To: C List 
Cc: Bruce Whitmore 
Sent: Fri, May 29, 2020 1:06 pm
Subject: Stus-List Replacement LED for circuit breaker panel?

Hello all,
Please see the link to look at my circuit breaker panel LED:  Circuit Breaker 
Panel 2.jpg

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Circuit Breaker Panel 2.jpg
Shared with Dropbox |

 |

 |


The bottom one is broken.  

I tried ordering this one through Amazon, but it was too small:  
https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
Does anyone know where I might find the right replacement?
Thank you!

Bruce Whitmore
1994 C 37/40+ "Astralis"

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Replacement LED for circuit breaker panel?

2020-05-29 Thread Bruce Whitmore via CnC-List 
Hello all,
Please see the link to look at my circuit breaker panel LED:  Circuit Breaker 
Panel 2.jpg

| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Circuit Breaker Panel 2.jpg

Shared with Dropbox
 |

 |

 |


The bottom one is broken.  

I tried ordering this one through Amazon, but it was too small:  
https://smile.amazon.com/gp/product/B000K2K7BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8=1
Does anyone know where I might find the right replacement?
Thank you!

Bruce Whitmore
1994 C 37/40+ "Astralis"

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray