Re: GTA04 hardware suggestion and discussions : 802.11n dual-band+Bluetooth+FM transceiver (Broadcom BCM4329)
With block diagram: BCM4329 Product Brief: http://pdf.eccn.com/pdfs/Datasheets/Broadcom/BCM4329.pdf Quote: ... Supports IEEE 802.11d/e (WMM, QoS, WMM-PS), h, i, j (upgrades available for k, r, w) ... Operating Frequencies: 2.4 - 2.497 GHz 4.9 - 5.85 GHz [ which means that should also support ch 100-140 ] ... - 9th January 2011, Bcm4329 driver source code: http://forum.xda-developers.com/showthread.php?t=906628 Quote: ... I tried many ways, last modified module name, unexpectedly successful, it is funny. ... I use a new version of the driver code, modify and compiled, try several Dflags, the result is the timeout or hardlock, so I deleted all code. Then, I started from scratch,redownload code from http://nv-tegra.nvidia.com/gitweb/?p...n/broadcom.git, Made a small change, even successful. ... the upgrade seems stable to me! ... Thanks, worked great for my kernel as well (2.6.32.9) but still can't enable IPv6. It would just give me an error on wifi. Any ideas? ... http://nv-tegra.nvidia.com/gitweb/?p...961c249174f304 Update to FW version 4.218.248.6 ... GOT IT!! Working IPv6 with good range ... Glenn ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
GTA04 hardware suggestion and discussions: GPS
Here is some GPS suggestion for discussion: BCM4750 datasheet: http://www.datasheetpro.com/595932_view_BCM4750_datasheet.html http://www.datasheetpro.com/595932_download_BCM4750_datasheet.html Quote: ... Real-time hardware correlator engine (fast acquisition and high-sensitivity) capable of tracking 24 satellites simultaneously ... High-sensitivity, -157-dBm assisted acquisition sensitivity (with coarse time assistance) and -162-dBm tracking sensitivity, enabling indoor and deep urban operation ... Autonomous cold start TTFF 30 s ... Broadcom - VoIP Android Tablet Support: http://www.thesearethedroids.com/2010/02/09/broadcom-voip-android-tablet-support/ Quote: ... As part of the Mobile World Congress demonstrations next week, Broadcom is also showcasing Android support across a range of other solutions including: ... Multi-chip Android support in a consumer multimedia tablet device based on the BCM11211 VoIP processor and leverages the BCM1181 for multimedia processing, the BCM4329 for Bluetooth and Wi-Fi, and the *BCM4750* for GPS. ... - Wi2Wi: http://www.wi2wi.com/navigation.php Quote: ... W2SG0006 ... -20 Channel, L1 Code ... Acquisition Time (TTFF) - Hot Start TTFF @ -136 dBm: 0.6 sec - Hot Start TTFF @ -141 dBm: 0.9 sec - Hot Start TTFF @ -146 dBm: 1.9 sec - Cold Start TTFF@-136 dBm: 32.6 sec - Reacquisition @ - 136 dBm: 100 msec Receiver Sensitivity - Minimum Acquisition Signal: -142 dBm - Minimum Tracking Signal: -157 dBm ... Quote: ... W2SG0084 ... 48 Channel GPS Receiver Module Solution ... - High sensitivity navigation engine (PVT) tracks as low as -163dBm ... - Active Jammer Remover: - Removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers ... - Aquisition Time Hot Start TTFF @ -136 dBm: 0.6 sec - Reciever Sensitivy Min. Acquisition Signal: -153 dBm ... Glenn ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtomoko v31 boot ploblems
В Птн, 04/02/2011 в 13:59 +0100, David Garabana Barro пишет: Hi Just flashed qtmoko v31 in NAND. It hangs on first boot with kernel panic: UBIFS error (pid 1): mount_ubifs: 'compressor lzo is not compiled in Kernel-panic - not syncing: VFS: Unable to mount root fs on onknown-block(0,0) Usind qtmoko kernel qi: -rw-r--r-- 1 user group 29088 feb 4 12:59 qi-31.udfu -rw-r--r-- 1 user group 93585408 feb 4 13:03 qtmoko-debian-v31.ubi -rw-r--r-- 1 user group 2218272 feb 4 12:58 uImage-v31.bin Any idea? Hi, i had this error. UBIFS support 2 compression algorithms, zlib and lzo. They can be mixed with one filesystem. You may specify which one will be used then creating new files. It can be scepified as mount option. The default is lzo. lzo is significantly faster but produce bigger files. The qtmoko kernel have only zlib compiled in, is if you just run kernel you'll see your message. To avoid it you should add mount option for mounting rootfs. it's mount -o compr=zlib and kernel parameter rootflags=compr=zlib. this should be active in your bootloader. Gennady. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Fwd: New theme by a french ..
Patryk Benderz wrote: [cut] Hi Radek, why don't you encourage this guy to subscribe to community@lists.openmoko.org ? Hi Patryk, that's what i did and he should be subscribed now :-) Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: GTA04 hardware suggestion and discussions: GPS
Glenn Moeller-Holst glenn.mh...@gmail.com writes: BCM4750 datasheet: http://www.datasheetpro.com/595932_download_BCM4750_datasheet.html It's only a 2-page Product Brief unfortunately. 2 Hz updates would be a downgrade from gta02 but it's impossible to say more without seeing at least the real protocol description. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
Dear Brian, Thank you for your interest and compliments ^^ To answer your issues : * the theme is not totally over. I have some difficulties at this step (I contacted Radek to answer my questions) to amend some elements like tabs, selections, areas like Main menu, Call history, Contact détails, etc... Keyboard is also one of them. * Concerning the clock, it's because of the place like for application titles (areas titles). I don't think it's necessary to always have time under the eyes. In the top shelf, a lot of icons can appear in the same time and as the shelf is a half smaller... I'm still looking for a solution to at least display application titles. But I can make a theme fork to display time like in the official theme, where you select the keyboard. It's like in the home zone, I canceled an icon (lock) to have 3 bigger icons. But you can still use the canceled icon function in clicking on options - lock screen. For more facilities, i need to see the pictures at the .pic format on my computer and not only on my nfr. But there are other questions, such as : 1. Is that anything can be part of a theme without touching, for example, images of existing or potential system .xml file? 2. If yes, how to modify the areas as Main Menu, Call History, Contact Details, Edit Contact, ... ? (3. How to view pictures .pic on my computer without going through the application of Pictures from QtMoko?) 4. Can I change the needle on the loading animation? 5. How do I change the lists such as the Applications folder or bookmarks (- height, background image, ..)? 6. And the tabs? Regards! Le samedi 05 février 2011 05:08:28, Brian a écrit : On Fri, 4 Feb 2011 17:42:08 +0100 cyberesprit cyberesp...@cyberesprit.fr wrote: Hello everyone! (sorry, i'am french and i use google traduct ..) I am the French who worked on the theme Faenqo. You can visit the site here (fr + en languages): https://cyberesprit.fr/faenqo/ 1. Accept the certificate even if it seems bogus (certificate home) 2. I host the site at home and my connection can be unstable at times, thank you for your understanding. Hoping you like it ^^ Regards! cyberesprit Tried it out today (full version) and was impressed by how clean it looks and how crisp the icons and wallpaper are compared to the default theme. There are some issues: * keyboard switching icon in top shelf is the default one. http://scap.linuxtogo.org/files/431ca35f6c484492de8a968699c06b01.png That's a top shelf button I wish was always there anyway. I find when I'm switching between apps sometimes the kb behavior doesn't work as expected. * I miss the clock being in the top shelf On the whole I love it and I'll be using it from now on. Thanks for the hard work you put in on this it's very much appreciated. Brian ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtomoko v31 boot ploblems
On Sat, 05 Feb 2011 11:16:03 +0300 Gennady Kupava g...@bsdmn.com wrote: В Птн, 04/02/2011 в 13:59 +0100, David Garabana Barro пишет: Hi Just flashed qtmoko v31 in NAND. It hangs on first boot with kernel panic: UBIFS error (pid 1): mount_ubifs: 'compressor lzo is not compiled in Kernel-panic - not syncing: VFS: Unable to mount root fs on onknown-block(0,0) Usind qtmoko kernel qi: -rw-r--r-- 1 user group 29088 feb 4 12:59 qi-31.udfu -rw-r--r-- 1 user group 93585408 feb 4 13:03 qtmoko-debian-v31.ubi -rw-r--r-- 1 user group 2218272 feb 4 12:58 uImage-v31.bin Any idea? Hi, i had this error. UBIFS support 2 compression algorithms, zlib and lzo. They can be mixed with one filesystem. You may specify which one will be used then creating new files. It can be scepified as mount option. The default is lzo. lzo is significantly faster but produce bigger files. The qtmoko kernel have only zlib compiled in, is if you just run kernel you'll see your message. To avoid it you should add mount option for mounting rootfs. it's mount -o compr=zlib and kernel parameter rootflags=compr=zlib. this should be active in your bootloader. So everyone who installs QtMoko v31 to NAND and uses Qi shell have this problem? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtmoko v32 (experimental)
Ole Carlsen wrote: Did we loose the languages? No, i just build the branch without languages. Next time i will do better, i promise :-) Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
Hi cyberesprit! You came here like the Spring! :D You made a really awesome theme! Now our Freerunner seems really a brandnew smartphone :D I was impressed by your work but I modified it a little bit according to my needs, this is the changelog: - /opt/qtmoko/etc/themes/faenqo.conf: added the string IconPath=/pics/themes/faenqo_pics, so in this way there is no need to overwrite the default icons folder. - /opt/qtmoko/etc/themes/home.xml: layout reworked to have OperatorName, Date, Time with bigger character and Profile (see screenshots: http://db.tt/vG5D0yZ); - /opt/qtmoko/pics/themes/faenqo, some icons substituted: -- titlebar and signal to have a better contrast (IMHO) -- colored missed-call(1) and message-in -- favourite, home, dialer (and I renamed the last one phone.png instead of text-css.png) -- personal-contact, message, call-history - /opt/qtmoko/pics/themes/faenqo_pics, some icons substituted: -- qpe/ : AppsIcon, Docsicon, SettingsIcon -- devtools, CallHistory, AddressBook (1) pay attention, actually there are two icons, call.pic and call.png, delete call.pic otherwise during compilation there will be a non working icon (see previous posts on qtmoko about the bug of invisibile missed-call icon). If you like these changes you can obviously merge them with your work! :) Otherwise my work will remain a simple derivative :) If anybody want to try it, download faenqomod.tar.gz from: http://db.tt/vG5D0yZ and just copy/paste folder and files following the proper order (there is no need to overwrite existing icon folder). There is also faenqomod_svg_icons.tar.gz, all the icons that I reworked in svg. I changed the name to faenqomod to distinguish it from the original faenqo theme. For now everything, apart the dialer, seems to work also with rotated screen! *screenshots* at the link above! Regards Joif -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/faenqo-tp5993128p5996026.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtomoko v31 boot ploblems
Ivan Matveev wrote: So everyone who installs QtMoko v31 to NAND and uses Qi shell have this problem? I am personally using this configuration and it works for me. I am wondering why it thinks it's lzo. All qtmoko ubifs images are created with: mkfs.ubifs -r /tmp/qtmoko-debian -o qtmoko-debian.ubifs -x zlib -m 2048 -e 126976 -c 2047 Note the -zlib option. I think your bootloader is ok, because it tries to mount ubi. So the problem is most likely in rootfs NAND partition. Kernel probably reads the compression type (lzo) from your old SHR installation (SHR uses lzo). But i have no idea why. Maybe it would be interesting to reflash it and then boot from SD card and check if it's flashed ok by dumping the rootfs NAND partition and comparing with the downloaded image. Another option could be booting from SD card and flashing rootfs to NAND with nandwrite, but i have never done this so cant help much. Maybe i could still do jffs2 images for stable releases, if that would help. Regards Radek ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: qtomoko v31 boot ploblems
В Сбт, 05/02/2011 в 19:31 +0100, Radek Polak пишет: Ivan Matveev wrote: So everyone who installs QtMoko v31 to NAND and uses Qi shell have this problem? I am personally using this configuration and it works for me. I am wondering why it thinks it's lzo. All qtmoko ubifs images are created with: mkfs.ubifs -r /tmp/qtmoko-debian -o qtmoko-debian.ubifs -x zlib -m 2048 -e 126976 -c 2047 Note the -zlib option. I think your bootloader is ok, because it tries to mount ubi. So the problem is most likely in rootfs NAND partition. Kernel probably reads the compression type (lzo) from your old SHR installation (SHR uses lzo). But i have no idea why. Maybe it would be interesting to reflash it and then boot from SD card and check if it's flashed ok by dumping the rootfs NAND partition and comparing with the downloaded image. Another option could be booting from SD card and flashing rootfs to NAND with nandwrite, but i have never done this so cant help much. Maybe i could still do jffs2 images for stable releases, if that would help. Hi Radek Ivan. I just described why that kernel message appears, wants lzo - no lzo module - no mount - panic. Most probably David just did some mistake flashing Qi, kernel or rootfs. He should first just recheck everything. Othewise for me only questionable part is bootloader which load some options from some places and contains some options which only known to person who compiled it. Booting from SD just attempt to mount you NAND fs is next step to solve issue. Other alternative is to boot with NAND u-boot with kernel option and see if it will work. Other alternative to recompile Qi with that option and see if it will work. I am wondering why it thinks it's lzo. Only idea that this preference is not stored somehow, of it 'attempts' to use lzo somehow before reading that preference. But this is only wild guesses. Maybe i could still do jffs2 images for stable releases, if that would help. IMHO, this is actually bad idea, as UBI is much better from any point of view, and providing jffs2 version actually will confuse users. Also, where is no reason for ubi not to work, at least it is good idea to figure out what is cause of current issue before providing such 'workarounds'. Best regards, Gennady. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: community Digest, Vol 221, Issue 9
В Птн, 04/02/2011 в 16:18 +0100, giacomo 'giotti' mariani пишет: On 02/04/2011 16:08, community-requ...@lists.openmoko.org wrote: Hi Just flashed qtmoko v31 in NAND. It hangs on first boot with kernel panic: UBIFS error (pid 1): mount_ubifs: 'compressor lzo is not compiled in Kernel-panic - not syncing: VFS: Unable to mount root fs on onknown-block(0,0) Usind qtmoko kernel qi: -rw-r--r-- 1 user group 29088 feb 4 12:59 qi-31.udfu -rw-r--r-- 1 user group 93585408 feb 4 13:03 qtmoko-debian-v31.ubi -rw-r--r-- 1 user group 2218272 feb 4 12:58 uImage-v31.bin Any idea? Same here. http://lists.openmoko.org/pipermail/community/2010-December/063993.html I had QtMoko v28 in NAND(jffs). Installed QtMoko v30(ubifs) to NAND. Worked fine. Installed Debian to SD with install.sh script started from NAND QtMoko. Debian worked Installed SRH(ubifs) to NAND. Worked. Installed QtMoko v30 to NAND. Can't boot. Same error as yours. With some random multiple reflashing of kernel/rootfs/u-boot-env managed to make QtMoko v30 boot from NAND. Upgraded to QtMoko v31. Can't boot. Same error as yours. Kernel complains it cant find root fs. Pity it doesn't show boot options in the panic message. Installed QtMoko v28 to NAND(jffs). Boots fine. QtMoko v31 from SD boots fine and shows regular NAND partition layout. neo:~# cat /proc/mtd dev:size erasesize name mtd0: 0020 0001 physmap-flash.0 mtd1: 0004 0002 qi mtd2: 0004 0002 depr-ub-env mtd3: 0080 0002 kernel mtd4: 000a 0002 depr mtd5: 0004 0002 identity-ext2 mtd6: 0f6a 0002 rootfs Have no idea how to debug this. The problem manifests only on some phones so no hope for help from people who know. Can someone enlighten me how the partitions are marked in NAND? I have a similar problem, with gena2x uboot: with qtmoko 31 and 32 in NAND, uboot gives me somenthig like: wrong data CRC the 28.2 one works good any idea? Yes, i saw this at least 3 times with other users. Cause is you have wrong environment (u-boot setup). Cause of 'wrong data CRC' on NAND is older settings. In old u-boots configs (and in read-only NOR u-boot config) it's set: nand read.e 0x3200 kernel 0x20; Which mean 'load 2Mb from NAND to ram'. if kernel 2mb, it load only part of kernel and you getting 'wrong CRC' cause kernel had header with CRC sum and it is checked upon boot. You should set this to nand read.e 0x3200 kernel 0x30; to load kernels up to 3Mb... Now, usual problems: 1. you booting NOR instead of NAND boot (check first line in boot screen) 2. you forgot to flash u-boot environment (read http://wiki.openmoko.org/wiki/U-boot-gena2x ) 3. you forgot to setup your u-boot environment (read http://wiki.openmoko.org/wiki/U-boot-gena2x ) Go read that FAQ and ensure you did everything mentioned in it. Gennady. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
Hi Joif ! Thank you for all compliments! For IconPath = , you just answered to one of my proccupation ! and i thank you very much ! really great ! I like idea of operatorname, the date .. and i think i will use it. I like some parts of your work, others less. So, if you agree, i will put your fork on the faenqo site with screenshots. however, for screen rotation, i thought about making a other Faenqo because by default it is not so good. But this is not a priority for me since the screen is not really made to be seen horizontally. Anyway thanks for your interest (and sorry to have taken your idea unconsciously ^^). You seem to know well QtMoko (I'm new here, excuse me), can you please answer following questions? 1. Is that anything can be part of a theme without touching, for example, images of existing or potential system .xml file? 2. If yes, how to modify the areas as Main Menu, Call History, Contact Details, Edit Contact, ... ? 3. How to view pictures .pic on my computer without going through the application of Pictures from QtMoko? 4. Can I change the needle on the loading animation? 5. How do I change the lists such as the Applications folder or bookmarks (- height, background image, ..)? 6. And the tabs? Regards! Le samedi 05 février 2011 19:06:16, Joif a écrit : Hi cyberesprit! You came here like the Spring! :D You made a really awesome theme! Now our Freerunner seems really a brandnew smartphone :D I was impressed by your work but I modified it a little bit according to my needs, this is the changelog: - /opt/qtmoko/etc/themes/faenqo.conf: added the string IconPath=/pics/themes/faenqo_pics, so in this way there is no need to overwrite the default icons folder. - /opt/qtmoko/etc/themes/home.xml: layout reworked to have OperatorName, Date, Time with bigger character and Profile (see screenshots: http://db.tt/vG5D0yZ); - /opt/qtmoko/pics/themes/faenqo, some icons substituted: -- titlebar and signal to have a better contrast (IMHO) -- colored missed-call(1) and message-in -- favourite, home, dialer (and I renamed the last one phone.png instead of text-css.png) -- personal-contact, message, call-history - /opt/qtmoko/pics/themes/faenqo_pics, some icons substituted: -- qpe/ : AppsIcon, Docsicon, SettingsIcon -- devtools, CallHistory, AddressBook (1) pay attention, actually there are two icons, call.pic and call.png, delete call.pic otherwise during compilation there will be a non working icon (see previous posts on qtmoko about the bug of invisibile missed-call icon). If you like these changes you can obviously merge them with your work! :) Otherwise my work will remain a simple derivative :) If anybody want to try it, download faenqomod.tar.gz from: http://db.tt/vG5D0yZ and just copy/paste folder and files following the proper order (there is no need to overwrite existing icon folder). There is also faenqomod_svg_icons.tar.gz, all the icons that I reworked in svg. I changed the name to faenqomod to distinguish it from the original faenqo theme. For now everything, apart the dialer, seems to work also with rotated screen! *screenshots* at the link above! Regards Joif ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
Hi, guys. I didn't actually tried new theme yet, but i have few idea about themes is general :). I tried all themes from QTopia, all are not usable cause they designed for smaller resolution screens, but i noticed interesting thing that some themes include 3 buttons in bottom instead of 2, so i thinking, may be it would be nice to add button to show/hide keyboard in middle? Gennady. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
2011/2/5 Gennady Kupava g...@bsdmn.com Hi, guys. I didn't actually tried new theme yet, but i have few idea about themes is general :). I tried all themes from QTopia, all are not usable cause they designed for smaller resolution screens, but i noticed interesting thing that some themes include 3 buttons in bottom instead of 2, so i thinking, may be it would be nice to add button to show/hide keyboard in middle? Gennady. I noticed it too, and the idea for a middle button to show/hide keyboard is great. It could be really usefull! But as I wrote in the previous post, I think that for this kind of customization it is necessary to work with the qtextended server widgets. I have to study some docs :) Regards Joif ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: faenqo
I like idea of operatorname, the date .. and i think i will use it. I like some parts of your work, others less. So, if you agree, i will put your fork on the faenqo site with screenshots. Sure, no problem! ;) Anyway thanks for your interest (and sorry to have taken your idea unconsciously ^^). Haha don't worry, I will just send to you a legion of lawyers... oh no no, I don't have much money I think... I'm joking I'm joking ^_^ But remeber: If you have an apple and I have an apple and we exchange these apples then you and I will still each have one apple. But if you have an idea and I have an idea and we exchange these ideas, then each of us will have two ideas. George Bernard Shaw 1. Is that anything can be part of a theme without touching, for example, images of existing or potential system .xml file? 2. If yes, how to modify the areas as Main Menu, Call History, Contact Details, Edit Contact, ... ? 4. Can I change the needle on the loading animation? 5. How do I change the lists such as the Applications folder or bookmarks (- height, background image, ..)? 6. And the tabs? I encountered same problems when I was working on the finximod theme. Unfortunately there seems to be some limitations in working with the themes, and for more customizations it is necessary to work with the server widgets. From the qtextended docs: The concept of server widgets allows the customization of the Qt Extended main server widget beyond what is already possible due to theming. The main parts of the user interface are separated via abstract widgets which allows the replacement of a particular component such as the launcher or the call screen without having to worry about implications for other UI components. So, there are some arguments to study, here are the references: http://doc.trolltech.com/qtextended4.4/index.html http://doc.trolltech.com/qtextended4.4/userinterface.html http://doc.trolltech.com/qtextended4.4/qtopiaserverapplication.html#qt-extended-server-widgets Unfortunately there are no simple tutorials to follow... 3. How to view pictures .pic on my computer without going through the application of Pictures from QtMoko? eh, interesting question. Regards -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/faenqo-tp5993128p5996517.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
barom - an altimeter/weather utility for freerunner
Hello All, I think this project is working well enough to share: http://jeepingben.homelinux.net/barom/ This project uses the bmp085 barometer to show either weather or altitude. The bmp085 is part of the freerunner navigation board, is to be part of the GTA04, and can be installed separately. I don't think I have an account to edit the openmoko wiki, but this could go under userspace software in the Freerunner Navigation Board page. Ben ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: barom - an altimeter/weather utility for freerunner
On 2/5/11, Benjamin Deering ben_deer...@swissmail.org wrote: Hello All, I think this project is working well enough to share: http://jeepingben.homelinux.net/barom/ This project uses the bmp085 barometer to show either weather or altitude. The bmp085 is part of the freerunner navigation board, is to be part of the GTA04, and can be installed separately. I don't think I have an account to edit the openmoko wiki, but this could go under userspace software in the Freerunner Navigation Board page. Ben Hi Ben, thanks for sharing this application! I added a section as you said under the section userspace software of the FRNBv2 wiki page. If you want to pimp or change the short description let me know. Regards, Michele ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: barom - an altimeter/weather utility for freerunner
Benjamin Deering ben_deer...@swissmail.org writes: I think this project is working well enough to share: http://jeepingben.homelinux.net/barom/ The source code in svn talks about version 0.2 but there's already a binary for 0.3? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: barom - an altimeter/weather utility for freerunner
On 02/05/2011 07:23 PM, Timo Juhani Lindfors wrote: Benjamin Deeringben_deer...@swissmail.org writes: I think this project is working well enough to share: http://jeepingben.homelinux.net/barom/ The source code in svn talks about version 0.2 but there's already a binary for 0.3? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community oops, forgot to check in the latest, it should be there now. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om2008.9] new 4 Gbyte microSD card
El día Tuesday, January 11, 2011 a las 02:18:38PM +0100, Matthias Apitz escribió: I will buy a new one. I did this (4 GByte from Hama) and it works fine: root@om-gta02:~# fgrep mmc /var/log/messages Feb 6 07:13:21 om-gta02 user.debug kernel: [1.955000] mmc_set_power(power_mode=1, vdd=20 Feb 6 07:13:21 om-gta02 user.debug kernel: [2.83] mmc_set_power(power_mode=2, vdd=15 Feb 6 07:13:21 om-gta02 user.info kernel: [3.095000] mmc0: new high speed SDHC card at address b368 Feb 6 07:13:21 om-gta02 user.info kernel: [3.375000] mmcblk0: mmc0:b368 NCard 3920896KiB Feb 6 07:13:21 om-gta02 user.info kernel: [3.38] mmcblk0: p1 Of course it has only Marketing-4-Gig, i.e. less: root@om-gta02:~# df -kh /media/card FilesystemSize Used Available Use% Mounted on /dev/mmcblk0p13.7G 32.0k 3.7G 0% /media/card Thx matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e g...@unixarea.de - w http://www.unixarea.de/ ¡Ya basta! ¡Tropas de OTAN, fuera de Afghanistan! There's an end of it! NATO troups out of Afghanistan! Schluss jetzt endlich! NATO raus aus Afghanistan! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
