Re: [Raster+FSO] USB Host keyboard problem
On Wed, 08 Oct 2008 13:26:30 +0100, Andy Green <[EMAIL PROTECTED]> wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Somebody in the thread at some point said: > | Under the latest Rasterman image with FSO repos (frameworkd, zhone, > | supporting installed) when I switch to USB Host mode (via sysfs, not > dbus), > | it will automount my USB thumbdrive, but doesn't do anything with the > | keyboard that previously worked, and 'lsusb' is always empty. Module > | hci_usb is inserted. > > | usb 1-2: new low speed USB device using s3c2410-ohci and address 12 > | usb 1-2: configuration #1 chosen from 1 choice > | input: CHESEN USB Keyboard as > | /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.0/input/input19 > | input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s3c24xx-2 > | input: CHESEN USB Keyboard as > | /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.1/input/input20 > | input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s3c24xx-2 > | usb 1-2: USB disconnect, address 12 > > You'd think if it can enumerate it, it should show up in lsusb... but it > has gone so far as to arrange input subsystem support, it can't be that > broken. > > Check and see if udev creates /dev/input/event* node(s) for it? If it > does, try hexdump -c on it and type some keys on the keyboard. If that > makes output, must be something on X side. Yes, the hollow lsusb is what first threw me. It's always that way, and /proc/bus/usb is empty as well. Indeed, it DOES create /dev/input/event5 and /dev/input/event6 when plugged in, and event5 carries keyboard activity. So it seems I have two possibly unrelated problems - lsusb & /proc/sys/bus/usb being empty, and X not recognizing the keyboard. There's no X config in the 'usual' /etc/X11 location, where does it control devices like keyboard then? j ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Raster+FSO] USB Host keyboard problem
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | Under the latest Rasterman image with FSO repos (frameworkd, zhone, | supporting installed) when I switch to USB Host mode (via sysfs, not dbus), | it will automount my USB thumbdrive, but doesn't do anything with the | keyboard that previously worked, and 'lsusb' is always empty. Module | hci_usb is inserted. | usb 1-2: new low speed USB device using s3c2410-ohci and address 12 | usb 1-2: configuration #1 chosen from 1 choice | input: CHESEN USB Keyboard as | /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.0/input/input19 | input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s3c24xx-2 | input: CHESEN USB Keyboard as | /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.1/input/input20 | input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s3c24xx-2 | usb 1-2: USB disconnect, address 12 You'd think if it can enumerate it, it should show up in lsusb... but it has gone so far as to arrange input subsystem support, it can't be that broken. Check and see if udev creates /dev/input/event* node(s) for it? If it does, try hexdump -c on it and type some keys on the keyboard. If that makes output, must be something on X side. - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkjspvAACgkQOjLpvpq7dMrF8wCeIS8UIDewffOJMADyB7s0E+gn mzYAn0pQHYzQyHzeQdhA1+wIwHjUJ7SP =tSwp -END PGP SIGNATURE- ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[Raster+FSO] USB Host keyboard problem
Under the latest Rasterman image with FSO repos (frameworkd, zhone, supporting installed) when I switch to USB Host mode (via sysfs, not dbus), it will automount my USB thumbdrive, but doesn't do anything with the keyboard that previously worked, and 'lsusb' is always empty. Module hci_usb is inserted. Output of dmesg for the entire cycle: s3c2410: changing usb to host usb 1-2: new low speed USB device using s3c2410-ohci and address 12 usb 1-2: configuration #1 chosen from 1 choice input: CHESEN USB Keyboard as /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.0/input/input19 input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s3c24xx-2 input: CHESEN USB Keyboard as /devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.1/input/input20 input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s3c24xx-2 usb 1-2: USB disconnect, address 12 s3c2410: changing usb to device usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet So it sees the keyboard and knows what it is, but no keys work. Is the problem with X? j ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
