Re: CAD conversion and editing
Lothar Behrens wrote: Hi, I have converted as much as possible from the CAD files into BRLCAD files. Propably I have forgotten to tell Michael Shiloh where the converted files are. (As of I had eMail contact to him) Hi Lothar, Yes, tell me where the files are, and we'll gladly host them on downloads.openmoko.org. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Hi Michael, as Claus has posted, the files are currently located here: http://controls.ae.gatech.edu/claus/web/openmoko.html Lothar Am 25.09.2008 um 19:44 schrieb Michael Shiloh: Lothar Behrens wrote: Hi, I have converted as much as possible from the CAD files into BRLCAD files. Propably I have forgotten to tell Michael Shiloh where the converted files are. (As of I had eMail contact to him) Hi Lothar, Yes, tell me where the files are, and we'll gladly host them on downloads.openmoko.org. Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
CAD conversion and editing
Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The only solution I currently see is buying or pirating the Pro/ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Please see inline and below... On Wednesday 24 September 2008 08:59:12 am Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The IGES files I created seemed to work in Pro/E and CATIA V5. Can you figure out if the files are corrupted or if it is a non-working import filter in brlcad that does not work? Have you tried opening a single file and not the complete assembly? The only solution I currently see is buying or pirating the Pro/ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. I have access to a Pro/E licencense and can look into that. However, it won't happen till the weekend... After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. DXF is essentially a 2D format. Since there is no conversion from 3D to 2D that does not lose information, a usefull conversion heavily depends on the need of the user of those 2D DXF files. IF the list could agree on a limited number of planes/slices through the 3D model I might be willing to put the time into creating them. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas As said above, I will look into this brlcad over the weekend and look into the conversion of the files into the appropriate format. However, I can't promise anything... (BTW, I have never heard of brlcad, but I also hardly use anything else than CATIA these days...) Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. Well... someone seems to have been successful nine days ago!? http://brlcad.org/gallery/s/screenshots/iges-openmoko-conversion.png.html Or is there something I don't get about that screenshot? Regards, Andreas I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The only solution I currently see is buying or pirating the Pro/ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Hi, I have converted as much as possible from the CAD files into BRLCAD files. Propably I have forgotten to tell Michael Shiloh where the converted files are. (As of I had eMail contact to him) Also I am not much familar with the BRL CAD and I also could not compare the files to their orginal versions. Where could I put the tgz file that contains all the others (~ 16 MB) ? The file also contains a script. (How I have converted the igs files) Regards, Lothar Am 24.09.2008 um 16:09 schrieb Claus Christmann: Please see inline and below... On Wednesday 24 September 2008 08:59:12 am Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The IGES files I created seemed to work in Pro/E and CATIA V5. Can you figure out if the files are corrupted or if it is a non-working import filter in brlcad that does not work? Have you tried opening a single file and not the complete assembly? The only solution I currently see is buying or pirating the Pro/ ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. I have access to a Pro/E licencense and can look into that. However, it won't happen till the weekend... After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. DXF is essentially a 2D format. Since there is no conversion from 3D to 2D that does not lose information, a usefull conversion heavily depends on the need of the user of those 2D DXF files. IF the list could agree on a limited number of planes/slices through the 3D model I might be willing to put the time into creating them. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas As said above, I will look into this brlcad over the weekend and look into the conversion of the files into the appropriate format. However, I can't promise anything... (BTW, I have never heard of brlcad, but I also hardly use anything else than CATIA these days...) Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
CAD conversion and editing
Great, If there are people up to it, I hope someone will get it done sometime (soon?). I also got an email from someone named Christoph, he might do it tonight. I hope whoever is first will post to the newsgroup, so there is no dublication of effort. As of getting IGES files loading into BRL-CAD it would be great to get some directions on that, because I tried it myself, by following the manual, and did not succeed neither in BRL-CAD nor in VariCad. I am almost positive the files were not corrupted as there was not error. This link proves it is possible http://brlcad.org/gallery/s/screenshots/iges-openmoko-conversion.png.html but the question is how? ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Hi,
I have tried another run on files that were not successfully converted.
For sample this file:
mac:brl-cad-conv lothar$ ls -l gta02-mme01_asm.igs*
-r--r--r-- 1 lothar staff 152091796 30 Jun 16:09 gta02-
mme01_asm.igs # Converts to
-rw-r--r-- 1 lothar staff104 24 Sep 18:55 gta02-
mme01_asm.igs.g# this, when deleted
mac:brl-cad-conv lothar$ ./convert.sh
#!/bin/sh
for file in *.igs; do
if [ ! -e $file.g ]; then
/usr/brlcad/bin/iges-g -t -o $file.g $file
fi
done
Can anybody else convert this file ?
Thanks
Lothar
**
BRL-CAD Release 7.10.4 Crash Report
Thu Nov 29 17:25:17 EST 2007, Compilation 2
[EMAIL PROTECTED]:/usr/brlcad/rel-7.10.4
Command: iges-g
Process: 5011
Path: /usr/brlcad/bin/iges-g
Date: Wed Sep 24 18:56:05 2008
Call stack backtrace:
#1 0x9224e900 in nanosleep ()
#2 0x92265cd0 in sleep ()
#3 0x0017e4dc in bu_backtrace (fp=0xa0398e5c) at backtrace.c:377
start = {
tv_sec = 175365,
tv_usec = 435849
}
end = {
tv_sec = 175380,
tv_usec = 436193
}
start = {
tv_sec = 175365,
tv_usec = 435849
}
end = {
tv_sec = 175380,
tv_usec = 436193
}
start = {
tv_sec = 175365,
tv_usec = 435849
}
end = {
tv_sec = 175380,
tv_usec = 436193
}
start = {
tv_sec = 175365,
tv_usec = 435849
}
end = {
tv_sec = 175380,
tv_usec = 436193
}
#4 0x0018515c in bu_crashreport (filename=0x1a9654 iges-g-5011-
bomb.log) at crashreport.c:109
#5 0x0017f370 in bu_bomb (str=0xa0360424 \00580\006) at bomb.c:186
#6 0x008641f4 in rt_nurb_s_eval (srf=0x7783f10, u=1.046846010283,
v=2.5684601028290004, final_value=0xb230) at nurb_eval.c:88
mesh_ptr = (fastf_t *) 0x7784210
curves = (fastf_t *) 0x2
i = -1073745360
row_size = 2
col_size = 2
c_ptr = (fastf_t *) 0x8e17b4
diff_curve = (fastf_t *) 0x7784b70
ev_pt = (fastf_t *) 0xe
k_index = -1
coords = 3
#7 0x00019418 in Assign_vu_geom (vu=0x7784930, u=1.046846010283,
v=2.5684601028290004, srf=0x7783f10) at trimsurf.c:390
uvw = {3.4869690200662636e-76, 8.9972621536927546e-311,
6.1918101183250712e-316}
pt_on_srf = {0, 0, 0, 0}
moved = 1
#8 0x000198d8 in Add_trim_curve (entity_no=125323632, lu=0x77848d0,
srf=0x7783f10) at trimsurf.c:478
entity_type = 110
crv = (struct edge_g_cnurb *) 0x7784970
eu = (struct edgeuse *) 0x77848d0
new_eu = (struct edgeuse *) 0x1dc40
x = 5.0448064652679996
y = 1.1001
z = 0
ncoords = 125323792
i = 121920
#9 0x00019f48 in Make_trim_loop (entity_no=1064, orientation=1,
srf=0x7783f10, fu=0x77849f4) at trimsurf.c:635
curve_count = 4
curve_list = (int *) 0x77849f0
lu = (struct loopuse *) 0x77848d0
new_eu = (struct edgeuse *) 0x10a0
entity_type = 102
ncoords = 1064
x = 1.3527723018393412e-312
y = 8.4880254361177474e-314
z = -1.9972382932903736
u = -1.3347076269835431e+88
v = 0
i = 1
#10 0x0001a584 in Make_loop (entity_no=121920, orientation=1,
on_surf_de=2115, srf=0x7783f10, fu=0x7784780) at trimsurf.c:828
lu = (struct loopuse *) 0xe
entity_type = 142
surf_de = 2115
param_curve_de = 2129
model_curve_de = 2119
i = 0
#11 0x0001b29c in trim_surf (entityno=125316160, s=0x776c380) at
trimsurf.c:1080
m = (struct model *) 0x5501d50
srf = (struct face_g_snurb *) 0x7783f10
fu = (struct faceuse *) 0x7784780
lu = (struct loopuse *) 0x5501d50
kill_lu = (struct loopuse *) 0x7782c40
verts = {0x77835d0, 0x7784700, 0x7783630}
entity_type = 144
surf_de = 2115
has_outer_boundary = 1
inner_loop_count = 0
outer_loop = 2131
inner_loop = (int *) 0x0
i = 89136464
lu_uv_orient = 125316160
#12 0x0001c180 in Convtrimsurfs () at trimsurf.c:1521
i = 1066
convsurf = 4
totsurfs = 36
m = (struct model *) 0x5501d50
s = (struct shell *) 0x776c380
fu = (struct faceuse *) 0x42a
hit_list = {
magic = 1607280,
forw = 0x0,
back = 0x20e0c
}
#13 0x0001154c in main (argc=89136256, argv=0x0) at main.c:315
i = 0
c = 14
file_count = 0
output_file = 0x24cdc \001\001e80\005P\03480\005P\03480
#14 0x1eb4 in _start (argc=5, argv=0xb7b8, envp=0xb7d0)
at /SourceCache/Csu/Csu-57/crt.c:272
p = 0xa036262c 92\034+P92\034:\f92\035Y92\034¸ø92-
938092\034õ(92-93092#:h92\034©\f92-90¼92
\03484h92\034Àà92\034:|92-979492-9a9c92\034Ò$92
\035\\ð92 84Ð92#:Ø92\037ø 92$ $92#\bp92%^?@92#\002p92
\1Ø9200920$9892+q892$±\02492 99¨92.1\f92(9a892
+p(920*P920,ð9201d92#\006\00492\3¨92 Õ`92\034·à92
\0344 92\0344 92\034+ 92!Â92
Re: CAD conversion and editing
Please see inline and below: On Wednesday 24 September 2008 10:58:59 am Lothar Behrens wrote: Hi, I have converted as much as possible from the CAD files into BRLCAD files. Propably I have forgotten to tell Michael Shiloh where the converted files are. (As of I had eMail contact to him) Also I am not much familar with the BRL CAD and I also could not compare the files to their orginal versions. Where could I put the tgz file that contains all the others (~ 16 MB) ? If you want, I can host the files at webspace of mine, next to the IGES and STEP files. If that sounds like an option, simply email me the files. (Once Michael Shiloh gets in contact with you the files can then be transfered to downloads.openmoko.org/CAD as well) The file also contains a script. (How I have converted the igs files) Regards, Lothar Am 24.09.2008 um 16:09 schrieb Claus Christmann: Please see inline and below... On Wednesday 24 September 2008 08:59:12 am Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The IGES files I created seemed to work in Pro/E and CATIA V5. Can you figure out if the files are corrupted or if it is a non-working import filter in brlcad that does not work? Have you tried opening a single file and not the complete assembly? The only solution I currently see is buying or pirating the Pro/ ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. I have access to a Pro/E licencense and can look into that. However, it won't happen till the weekend... After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. DXF is essentially a 2D format. Since there is no conversion from 3D to 2D that does not lose information, a usefull conversion heavily depends on the need of the user of those 2D DXF files. IF the list could agree on a limited number of planes/slices through the 3D model I might be willing to put the time into creating them. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas As said above, I will look into this brlcad over the weekend and look into the conversion of the files into the appropriate format. However, I can't promise anything... (BTW, I have never heard of brlcad, but I also hardly use anything else than CATIA these days...) Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen The files would then be available via http://controls.ae.gatech.edu/claus/web/openmoko.html -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
Please see inline and below: On Wednesday 24 September 2008 10:09:10 am Claus Christmann wrote: Please see inline and below... On Wednesday 24 September 2008 08:59:12 am Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The IGES files I created seemed to work in Pro/E and CATIA V5. Can you figure out if the files are corrupted or if it is a non-working import filter in brlcad that does not work? Have you tried opening a single file and not the complete assembly? The only solution I currently see is buying or pirating the Pro/ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. I have access to a Pro/E licencense and can look into that. However, it won't happen till the weekend... Hurray to procrastination... Well, I downloaded brlcad and briefly looked into that conversion thing. However, I could not figure out how to do it (again, I neither am a a regular Pro/E user nor have I ever heard of brlcad before). After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. DXF is essentially a 2D format. Since there is no conversion from 3D to 2D that does not lose information, a usefull conversion heavily depends on the need of the user of those 2D DXF files. IF the list could agree on a limited number of planes/slices through the 3D model I might be willing to put the time into creating them. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas As said above, I will look into this brlcad over the weekend and look into the conversion of the files into the appropriate format. However, I can't promise anything... (BTW, I have never heard of brlcad, but I also hardly use anything else than CATIA these days...) Regards, Claus It seems that I can't (for the lag of a better word) load the brlcad converter in Pro/E. The rather vague PDF calls for a file labeled *protk.dat* that shoul reside inside a /pro_engineer/ directory in the brlcad branch. I neither could find the file nor the directory. (I only tried the Windows binary download of brlcad since I only have a Windows Pro/E license.) So if anybody has a source to a step-by-step instruction on how to do the export from Pro/E, please let me know. Otherwise I will drop this conversion (as Andreas pointed out the IGES conversion seems to work after all). Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: CAD conversion and editing
On Wednesday 24 September 2008 02:38:44 pm Claus Christmann wrote: Please see inline and below: On Wednesday 24 September 2008 10:58:59 am Lothar Behrens wrote: Hi, I have converted as much as possible from the CAD files into BRLCAD files. Propably I have forgotten to tell Michael Shiloh where the converted files are. (As of I had eMail contact to him) Also I am not much familar with the BRL CAD and I also could not compare the files to their orginal versions. Where could I put the tgz file that contains all the others (~ 16 MB) ? If you want, I can host the files at webspace of mine, next to the IGES and STEP files. If that sounds like an option, simply email me the files. (Once Michael Shiloh gets in contact with you the files can then be transfered to downloads.openmoko.org/CAD as well) The file also contains a script. (How I have converted the igs files) Regards, Lothar Am 24.09.2008 um 16:09 schrieb Claus Christmann: Please see inline and below... On Wednesday 24 September 2008 08:59:12 am Breakable wrote: Hi, Anybody got any success for editing CAD files for the phone case? Basically I am trying to get them open in brlcad (which seems to be the best free CAD software ever), without any success yet. I had some success in VariCad demo (proprietary) where parts of the design are imported using STEP format, but it does not seem good enough, as I see about 50% of the shapes usually. IGES on the other hand seems like a total dissaster. The IGES files I created seemed to work in Pro/E and CATIA V5. Can you figure out if the files are corrupted or if it is a non-working import filter in brlcad that does not work? Have you tried opening a single file and not the complete assembly? The only solution I currently see is buying or pirating the Pro/ ENGINEER to edit or convert them to brlcad .g format using the Pro/E to BRLCAD converter plugin for Pro/ENGINEER from the brlcad suite. Buying or pirating for this task is not the option I like. Anybody that has a Pro/ENGINEER license can assist with that? There is a nice description how to do it in http://brlcad.org/w/images/6/66/Converting_Geometry.pdf in section 4.9 page 27 of pdf. I have access to a Pro/E licencense and can look into that. However, it won't happen till the weekend... After this is done properly, maybe the BRLCAD to DXF converter can be used to improve accessibility of design files for those that have AutoCad. DXF is essentially a 2D format. Since there is no conversion from 3D to 2D that does not lose information, a usefull conversion heavily depends on the need of the user of those 2D DXF files. IF the list could agree on a limited number of planes/slices through the 3D model I might be willing to put the time into creating them. If this issue wont be resolved I don't believe a community effort to build on the openness of the device will ever succeed. Regards, Ignas As said above, I will look into this brlcad over the weekend and look into the conversion of the files into the appropriate format. However, I can't promise anything... (BTW, I have never heard of brlcad, but I also hardly use anything else than CATIA these days...) Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen The files would then be available via http://controls.ae.gatech.edu/claus/web/openmoko.html Lothar's files are availalbe via http://controls.ae.gatech.edu/claus/web/openmoko.html Thank you, Lothar, for doing the conversion. Let's hope that someone can figure out the problem with the last resiting files. Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
CAD conversion and editing
It seems that I can't (for the lag of a better word) load the brlcad converter in Pro/E. The rather vague PDF calls for a file labeled *protk.dat* that shoul reside inside a /pro_engineer/ directory in the brlcad branch. I neither could find the file nor the directory. (I only tried the Windows binary download of brlcad since I only have a Windows Pro/E license.) So if anybody has a source to a step-by-step instruction on how to do the export from Pro/E, please let me know. Otherwise I will drop this conversion (as Andreas pointed out the IGES conversion seems to work after all). Regards, Claus Claus, Please take a look maybe this will help: http://inversionconsulting.blogspot.com/2008/05/protk-simplify-protkdat-with-env-vars.html Even with IGES working (not for me yet), it might worth a try. Maybe a better quality can be achieved? PS:I hope my mail application wont break the thread this time. I was getting it working for an hour now. Regards, Ignas ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
CAD conversion and editing
Lothar's files are availalbe via http://controls.ae.gatech.edu/claus/web/openmoko.html Thank you, Lothar, for doing the conversion. Let's hope that someone can figure out the problem with the last resiting files. Regards, Claus -- Claus Christmann Graduate Research Assistant Georgia Institute of Technology 270 Ferst Drive Atlanta, GA 30332-0150, USA http://uav.ae.gatech.edu Forbidden Assuming this is fixed, tnx for the effort! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
