Re: [Om 2008.12] No ssh / no wifi ?
Ed Kapitein (via Nabble) a écrit : > Hi Swap38, > > There is no item in the "settings" panel, but working with iwconfig and > wpa_supplicant works fine. > Please take a look at > http://wiki.openmoko.org/wiki/Wifi > and use the manual method of setting up your network. That's why I can't find it :-) Thanks a lot for your answer. swap38 -- View this message in context: http://n2.nabble.com/-Om-2008.12--No-ssh---no-wifi---tp1682347p1691524.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
Hi Swap38, There is no item in the "settings" panel, but working with iwconfig and wpa_supplicant works fine. Please take a look at http://wiki.openmoko.org/wiki/Wifi and use the manual method of setting up your network. I find it usefull to start in a well known state, so i issue: ifconfig eth0 down iwconfig eth0 txpower off iwconfig eth0 channel 0 iwconfig eth0 essid off before i make new settings for the wireless connection. Good luck! Kind regards, Ed On Mon, 2008-12-22 at 01:47 -0800, swap38 wrote: > > swap38 wrote: > > > > Ed Kapitein a écrit : > >> I ran into a similar problem. > >> The solution that worked for me was: > >> > >> dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > >> dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > >> dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > > > I will retry to flash all manually. > > > > OK, ssh works fine now. > But there's no wifi settings :( > please, help ! > > /swap38 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
wifi settings? - what do you mean. BillK On Mon, 2008-12-22 at 01:47 -0800, swap38 wrote: > > swap38 wrote: > > > > Ed Kapitein a écrit : > >> I ran into a similar problem. > >> The solution that worked for me was: > >> > >> dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > >> dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > >> dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > > > I will retry to flash all manually. > > > > OK, ssh works fine now. > But there's no wifi settings :( > please, help ! > > /swap38 -- William Kenworthy Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
swap38 wrote: > > Ed Kapitein a écrit : >> I ran into a similar problem. >> The solution that worked for me was: >> >> dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin >> dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 >> dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > I will retry to flash all manually. > OK, ssh works fine now. But there's no wifi settings :( please, help ! /swap38 -- View this message in context: http://n2.nabble.com/-Om-2008.12--No-ssh---no-wifi---tp1682347p1689476.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
Ed Kapitein a écrit : > I ran into a similar problem. > The solution that worked for me was: > > dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > Some of that might not be needed, but i did it anyway. > After it booted i had no working usb. > so i powered it down, removed the battery and usb cord, waited a few > secs and powered it back on again. > Now it did work as expected. That's what I've done but using neotool for flashing. The order was different (rootfs first), is it important ? Can somebody explain what "lowlevel" is ? I will retry to flash all manually. /Swap38 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
Ed Kapitein a écrit : > Linus Gasser wrote: >> Hi, >> >> I have the same problem - did they put in a non-compatible kernel >> version with regards to module? Does anybody have a working Om 2008.12 >> version? >> >> I checked the md5sums and they seem to be OK. >> >> - Is it necessary to flash more than the JFFS and the uImage? >> - Do I need to flash the u-boot, too? >> - And what is the "lowlevel" for? >> - Does anyone have a working Om 2008.12 with USB and/or Wifi? >> >> Looking forward, >> >> Linus >> > Hi Linus, > > I ran into a similar problem. > The solution that worked for me was: > > dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin > dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 > dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin > > Some of that might not be needed, but i did it anyway. > After it booted i had no working usb. > so i powered it down, removed the battery and usb cord, waited a few > secs and powered it back on again. > Now it did work as expected. > notice that the first boot took almost 2 minutes, while the second boot > took a little under a a minute. > i hope this helps. Hi, thanks, now it works. I must've fotgotten the kernel or so. Well, the Wifi-option is still not available from "Settings", but at least I can ssh into it using USB and then activate the Wifi. Linus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
2008/12/20 swap38 : > Second surprise : I can't ping 192.168.0.202 (so I can't connect to it > with ssh) I had the same problem on first boot, and it was simply resolved by booting again. On subsequent boots ssh has worked every time. -Timo ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
Linus Gasser wrote: > Hi, > > I have the same problem - did they put in a non-compatible kernel > version with regards to module? Does anybody have a working Om 2008.12 > version? > > I checked the md5sums and they seem to be OK. > > - Is it necessary to flash more than the JFFS and the uImage? > - Do I need to flash the u-boot, too? > - And what is the "lowlevel" for? > - Does anyone have a working Om 2008.12 with USB and/or Wifi? > > Looking forward, > > Linus > Hi Linus, I ran into a similar problem. The solution that worked for me was: dfu-util -a kernel -R -D Om2008.12-om-gta02.uImage.bin dfu-util -a rootfs -R -D Om2008.12-om-gta02.rootfs.jffs2 dfu-util -a u-boot -R -D gta02v5_and_up-u-boot.bin Some of that might not be needed, but i did it anyway. After it booted i had no working usb. so i powered it down, removed the battery and usb cord, waited a few secs and powered it back on again. Now it did work as expected. notice that the first boot took almost 2 minutes, while the second boot took a little under a a minute. i hope this helps. Kind regards, Ed ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [Om 2008.12] No ssh / no wifi ?
swap38 a écrit : > Hi all, > > I've just flashed my neo with Om2008.12 with (jffs2, uImage and u-Boot > md5sums are OK, neotool didn't report any error => everything is OK) > > First surprise : there's no wifi option > Second surprise : I can't ping 192.168.0.202 (so I can't connect to it > with ssh) Hi, I have the same problem - did they put in a non-compatible kernel version with regards to module? Does anybody have a working Om 2008.12 version? I checked the md5sums and they seem to be OK. - Is it necessary to flash more than the JFFS and the uImage? - Do I need to flash the u-boot, too? - And what is the "lowlevel" for? - Does anyone have a working Om 2008.12 with USB and/or Wifi? Looking forward, Linus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
