Re: unable to enumerate USB device on port 1
Christopher J. White ch...@grierwhite.com writes: On Mon, 2009-02-02 at 13:33 +0100, joa...@verona.se wrote: John Mandereau john.mander...@gmail.com writes: joa...@verona.se a écrit : usb 4-1: new full speed USB device using uhci_hcd and address 79 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 80 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 81 usb 4-1: device not accepting address 81, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 82 usb 4-1: device not accepting address 82, error -71 hub 4-0:1.0: unable to enumerate USB device on port 1 I had this happen last week, seemed to occur when it was completely dead, plugged into the wall, gained some charge and then auto-booted. The only remedy was to reboot the FR, then it worked fine. (FYI - I'm running Debian with Qi). Well, I've tried different wires, different distributions, etc. I'm starting to suspect the host OS, but I'm not sure how to verify it. ...cj ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- Joakim Verona ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: unable to enumerate USB device on port 1
John Mandereau john.mander...@gmail.com writes: joa...@verona.se a écrit : usb 4-1: new full speed USB device using uhci_hcd and address 79 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 80 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 81 usb 4-1: device not accepting address 81, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 82 usb 4-1: device not accepting address 82, error -71 hub 4-0:1.0: unable to enumerate USB device on port 1 I had this issue before, but only sporadically. Now I get it nearly always. What can I do? Will connecting a network adaptor to the freerunner in host mode be more reliable? You may want to try another USB wire. I recently had device descriptor read/64, error -71 failures with the wire shipped with my USB external hard disk happen with both the hard disk and the FreeRunner. The USB wire shipped with the FreeRunner works with both the hard disk and the FreeRunner; so I suppose this kind of error is the fault of the wire. I tried several wires already. More hints? Best, John Mandereau -- Joakim Verona ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: unable to enumerate USB device on port 1
joa...@verona.se a écrit : usb 4-1: new full speed USB device using uhci_hcd and address 79 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 80 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 81 usb 4-1: device not accepting address 81, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 82 usb 4-1: device not accepting address 82, error -71 hub 4-0:1.0: unable to enumerate USB device on port 1 I had this issue before, but only sporadically. Now I get it nearly always. What can I do? Will connecting a network adaptor to the freerunner in host mode be more reliable? You may want to try another USB wire. I recently had device descriptor read/64, error -71 failures with the wire shipped with my USB external hard disk happen with both the hard disk and the FreeRunner. The USB wire shipped with the FreeRunner works with both the hard disk and the FreeRunner; so I suppose this kind of error is the fault of the wire. Best, John Mandereau ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
unable to enumerate USB device on port 1
Im currently unable to get usb networking working with the freerunner: I get this nearly everytime I connect the freerunner: usb 4-1: new full speed USB device using uhci_hcd and address 79 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 80 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 81 usb 4-1: device not accepting address 81, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 82 usb 4-1: device not accepting address 82, error -71 hub 4-0:1.0: unable to enumerate USB device on port 1 I had this issue before, but only sporadically. Now I get it nearly always. What can I do? Will connecting a network adaptor to the freerunner in host mode be more reliable? -- Joakim Verona ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: unable to enumerate USB device on port 1
On Mon, 2009-02-02 at 13:33 +0100, joa...@verona.se wrote: John Mandereau john.mander...@gmail.com writes: joa...@verona.se a écrit : usb 4-1: new full speed USB device using uhci_hcd and address 79 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 80 usb 4-1: device descriptor read/64, error -71 usb 4-1: device descriptor read/64, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 81 usb 4-1: device not accepting address 81, error -71 usb 4-1: new full speed USB device using uhci_hcd and address 82 usb 4-1: device not accepting address 82, error -71 hub 4-0:1.0: unable to enumerate USB device on port 1 I had this happen last week, seemed to occur when it was completely dead, plugged into the wall, gained some charge and then auto-booted. The only remedy was to reboot the FR, then it worked fine. (FYI - I'm running Debian with Qi). ...cj ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
