Re: [coreboot] No video output with Bay Trail

2015-01-14 Thread Stefan Reinauer 
* Fred Young fred.yo...@kaleidescape.com [150107 16:46]:
 The last time that I synched my coreboot source was about 2 weeks ago. I just
 tried the latest FSP and I still have the same problem. When I load Linux, I 
 do
 see video output.
 

Your video bios executes, and fails because an int15 handler for 5f35 is
not implemented. Either reconfigure your vbios, or implement the
handler...

 Unsupported software interrupt #0x15 eax 0x3005f35
   
  
Stefan


-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

Re: [coreboot] No video output with Bay Trail

2015-01-08 Thread WANG FEI 
 (unknown)

 PCI: 05:02.0 (unknown)

 PCI: 05:03.0 (unknown)

 PCI: 07:00.0 (unknown)

 APIC: 02 (unknown)

 APIC: 04 (unknown)

 APIC: 06 (unknown)

 POST: 0x9e

 POST: 0x9d

 POST: 0x7a

 selfload

 POST: 0x7b

 POST: 0xf8





 *From:* Yang, York [mailto:york.y...@intel.com]
 *Sent:* January-05-15 5:46 PM
 *To:* Fred Young; coreboot@coreboot.org
 *Subject:* Re: No video output with Bay Trail



 Did you use the latest code and Baytrail Gold3 FSP?  I can see VGA output
 on Intel Bayley Bay board just selecting platform right and enable
 “configure defaults for Intel FSP” and gives all binary (FSP, VBIOS,
 microcode) correct path.  Do you have serial debug message dump?  It can
 help to identify some error.



 *From:* coreboot [mailto:coreboot-boun...@coreboot.org
 coreboot-boun...@coreboot.org] *On Behalf Of *Fred Young
 *Sent:* Monday, January 05, 2015 2:31 PM
 *To:* coreboot@coreboot.org
 *Subject:* [coreboot] No video output with Bay Trail



 I have an Aaeon EMB-BT1 with an Intel Atom E3845 CPU. I’ve successfully
 built coreboot specifying Bayley Bay CRB (FSP) as the “Mainboard model”.



 When I boot the machine after programming the flash with coreboot, I see
 lots of output on the serial line including output indicating that SeaBIOS
 has started.



 However, I don’t see any output on the video display on either HDMI or
 VGA. Here are my .config settings relating to video/VGA:



 CONFIG_VGA_BIOS_ID=8086,0f31

 CONFIG_ONBOARD_VGA_IS_PRIMARY=y

 CONFIG_VGA_BIOS=y

 CONFIG_VGA_BIOS_FILE=../intel/cpu/baytrail/vbios/Vga.dat

 CONFIG_VIDEO_MB=0

 CONFIG_VGA_ROM_RUN=y



 What do I need to do to get video output?



 --
 coreboot mailing list: coreboot@coreboot.org
 http://www.coreboot.org/mailman/listinfo/coreboot

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

Re: [coreboot] No video output with Bay Trail

2015-01-07 Thread Fred Young 
The last time that I synched my coreboot source was about 2 weeks ago. I just 
tried the latest FSP and I still have the same problem. When I load Linux, I do 
see video output.

Here's my serial output:

coreboot-4.0-7555-g8916d0d-dirty Wed Jan  7 09:52:17 EST 2015 starting...
POST: 0x44
POST: 0x47
POST: 0x48
prev_sleep_state = S5
POST: 0x4a
Baytrail Chip Variant: Bay Trail-I (ISG/embedded)
MRC v0.100
1 channels of DDR3 @ 1333MHz
POST: 0x4b
POST: 0x4c
POST: 0x4d
POST: 0x4e
POST: 0x4f
CBFS: loading stage fallback/ramstage @ 0x10 (287632 bytes), entry @ 
0x10
POST: 0x80
POST: 0x39
coreboot-4.0-7555-g8916d0d-dirty Wed Jan  7 09:52:17 EST 2015 booting...
POST: 0x40
clocks_per_usec: 1916
POST: 0x70
POST: 0x71
POST: 0x72
Enumerating buses...
POST: 0x24
FSP Header Version: 1
FSP Revision: 3.3
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x55
POST: 0x55
POST: 0x55
done
POST: 0x73
Allocating resources...
Reading resources...
APIC: 00 missing read_resources
Available memory below 4GB: 0x7ae0 (1966M)
Available memory above 4GB: 0M
Done reading resources.
Setting resources...
PCI: 00:00.0 missing set_resources
Done setting resources.
Done allocating resources.
POST: 0x74
Enabling resources...
done.
POST: 0x75
Initializing devices...
POST: 0x75
POST: 0x93
Setting up local apic...done.
POST: 0x9b
CPU: Intel(R) Atom(TM) CPU  E3845  @ 1.91GHz.
AP: slot 1 apic_id 2.
AP: slot 3 apic_id 6.
AP: slot 2 apic_id 4.
Initializing CPU #0
CPU #0 initialized
Initializing CPU #1
Initializing CPU #3
Turbo is unavailable
CPU #3 initialized
CPU #1 initialized
Initializing CPU #2
CPU #2 initialized
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Unsupported software interrupt #0x15 eax 0x3005f35
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Warning: PCI Device 2 does not have an IRQ entry, skipping it
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Devices initialized
POST: 0x76
Finalize devices...
Devices finalized
POST: 0x77
POST: 0x79
POST: 0x9c
ACPI: Writing ACPI tables at 7add6000.
ACPI: done.
Root Device (Intel Bayley Bay CRB (FSP))
CPU_CLUSTER: 0 (Intel BayTrail SoC)
APIC: 00 (Intel BayTrail SoC)
DOMAIN:  (Intel BayTrail SoC)
PCI: 00:00.0 (Intel BayTrail SoC)
PCI: 00:02.0 (Intel BayTrail SoC)
PCI: 00:03.0 (Intel BayTrail SoC)
PCI: 00:10.0 (Intel BayTrail SoC)
PCI: 00:11.0 (Intel BayTrail SoC)
PCI: 00:12.0 (Intel BayTrail SoC)
PCI: 00:13.0 (Intel BayTrail SoC)
PCI: 00:14.0 (Intel BayTrail SoC)
PCI: 00:15.0 (Intel BayTrail SoC)
PCI: 00:16.0 (Intel BayTrail SoC)
PCI: 00:17.0 (Intel BayTrail SoC)
PCI: 00:18.0 (Intel BayTrail SoC)
PCI: 00:18.1 (Intel BayTrail SoC)
PCI: 00:18.2 (Intel BayTrail SoC)
PCI: 00:18.3 (Intel BayTrail SoC)
PCI: 00:18.4 (Intel BayTrail SoC)
PCI: 00:18.5 (Intel BayTrail SoC)
PCI: 00:18.6 (Intel BayTrail SoC)
PCI: 00:18.7 (Intel BayTrail SoC)
PCI: 00:1a.0 (Intel BayTrail SoC)
PCI: 00:1b.0 (Intel BayTrail SoC)
PCI: 00:1c.0 (Intel BayTrail SoC)
PCI: 00:1c.1 (Intel BayTrail SoC)
PCI: 00:1c.2 (Intel BayTrail SoC)
PCI: 00:1c.3 (Intel BayTrail SoC)
PCI: 00:1d.0 (Intel BayTrail SoC)
PCI: 00:1e.0 (Intel BayTrail SoC)
PCI: 00:1e.1 (Intel BayTrail SoC)
PCI: 00:1e.2 (Intel BayTrail SoC)
PCI: 00:1e.3 (Intel BayTrail SoC)
PCI: 00:1e.4 (Intel BayTrail SoC)
PCI: 00:1e.5 (Intel BayTrail SoC)
PCI: 00:1f.0 (Intel BayTrail SoC)
PCI: 00:1f.3 (Intel BayTrail SoC)
PCI: 02:00.0 (unknown)
PCI: 03:00.0 (unknown)
PCI: 04:00.0 (unknown)
PCI: 05:01.0 (unknown)
PCI: 05:02.0 (unknown)
PCI: 05:03.0 (unknown)
PCI: 07:00.0 (unknown)
APIC: 02 (unknown)
APIC: 04 (unknown)
APIC: 06 (unknown)
POST: 0x9e
POST: 0x9d
POST: 0x7a
selfload
POST: 0x7b
POST: 0xf8


From: Yang, York [mailto:york.y...@intel.com]
Sent: January-05-15 5:46 PM
To: Fred Young; coreboot@coreboot.org
Subject: Re: No video output with Bay Trail

Did you use the latest code and Baytrail Gold3 FSP?  I can see VGA output on 
Intel Bayley Bay board just selecting platform right and enable configure 
defaults for Intel FSP and gives all binary (FSP, VBIOS, microcode) correct 
path.  Do you have serial debug message dump?  It can help to identify some 
error.

From: coreboot [mailto:coreboot-boun...@coreboot.org] On Behalf Of Fred Young
Sent: Monday, January 05, 2015 2:31 PM
To: coreboot@coreboot.orgmailto:coreboot@coreboot.org
Subject: [coreboot] No video output with Bay Trail

I have an Aaeon EMB-BT1 with an Intel Atom E3845 CPU. I've successfully built 
coreboot specifying Bayley Bay CRB (FSP

[coreboot] No video output with Bay Trail

2015-01-05 Thread Fred Young 
I have an Aaeon EMB-BT1 with an Intel Atom E3845 CPU. I've successfully built 
coreboot specifying Bayley Bay CRB (FSP) as the Mainboard model.

When I boot the machine after programming the flash with coreboot, I see lots 
of output on the serial line including output indicating that SeaBIOS has 
started.

However, I don't see any output on the video display on either HDMI or VGA. 
Here are my .config settings relating to video/VGA:

CONFIG_VGA_BIOS_ID=8086,0f31
CONFIG_ONBOARD_VGA_IS_PRIMARY=y
CONFIG_VGA_BIOS=y
CONFIG_VGA_BIOS_FILE=../intel/cpu/baytrail/vbios/Vga.dat
CONFIG_VIDEO_MB=0
CONFIG_VGA_ROM_RUN=y

What do I need to do to get video output?

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot

Re: [coreboot] No video output with Bay Trail

2015-01-05 Thread Yang, York 
Did you use the latest code and Baytrail Gold3 FSP?  I can see VGA output on 
Intel Bayley Bay board just selecting platform right and enable configure 
defaults for Intel FSP and gives all binary (FSP, VBIOS, microcode) correct 
path.  Do you have serial debug message dump?  It can help to identify some 
error.

From: coreboot [mailto:coreboot-boun...@coreboot.org] On Behalf Of Fred Young
Sent: Monday, January 05, 2015 2:31 PM
To: coreboot@coreboot.org
Subject: [coreboot] No video output with Bay Trail

I have an Aaeon EMB-BT1 with an Intel Atom E3845 CPU. I've successfully built 
coreboot specifying Bayley Bay CRB (FSP) as the Mainboard model.

When I boot the machine after programming the flash with coreboot, I see lots 
of output on the serial line including output indicating that SeaBIOS has 
started.

However, I don't see any output on the video display on either HDMI or VGA. 
Here are my .config settings relating to video/VGA:

CONFIG_VGA_BIOS_ID=8086,0f31
CONFIG_ONBOARD_VGA_IS_PRIMARY=y
CONFIG_VGA_BIOS=y
CONFIG_VGA_BIOS_FILE=../intel/cpu/baytrail/vbios/Vga.dat
CONFIG_VIDEO_MB=0
CONFIG_VGA_ROM_RUN=y

What do I need to do to get video output?

-- 
coreboot mailing list: coreboot@coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot