Bug#593013: installation-reports: No common CD-ROM drive detected
Package: installation-reports Severity: critical Justification: breaks the whole system -- Package-specific info: Boot method: CD Image version: debian-testing-sparc-CD-1.iso, 8-9-10 build Date: 08-14-10 Machine: Sun Ultra 10 Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [0] Detect network card:[ ] Configure network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: At the “Detect and mount CD-ROM” stage the installation failed. The error message was “No common CD_ROM drive was detected.” It suggested loading additional drivers from removable media. Actually, in ”/dev”, no IDE or ATAPI devices showed up. So the Hard disk was also not recognized. The last “testing” build that I was able to install was 07-05-10, which also had problems, but at least the IDE devices were detected. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20090123lenny6 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux athlon 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 02) lspci -knn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] lspci -knn: 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 22) lspci -knn: Kernel driver in use: parport_pc lspci -knn: Kernel modules: parport_pc lspci -knn: 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10) lspci -knn: Kernel driver in use: VIA_IDE lspci -knn: Kernel modules: via82cxxx lspci -knn: 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 30) lspci -knn: 00:08.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08) lspci -knn: 00:08.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08) lspci -knn: 00:0b.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11) lspci -knn: Kernel driver in use: tulip lspci -knn: Kernel modules: tulip lspci -knn: 00:0f.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01) lspci -knn: Kernel driver in use: ath5k_pci lspci -knn: Kernel modules: ath5k lspci -knn: 00:13.0 Mass storage controller [0180]: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N [1103:0004] (rev 03) lspci -knn: Kernel driver in use: HPT366_IDE lspci -knn: Kernel modules: hpt366 lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lsmod: Module Size Used by lsmod: ufs63620 0 lsmod: qnx47684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688 1 lsmod: jbd35092 1 ext3 lsmod: vfat8832 0 lsmod: fat39964 1 vfat lsmod: ext2 52744 0 lsmod: mbcache 6656 2 ext3,ext2 lsmod: arc41792 2 lsmod: ecb 2560 2 lsmod: crypto_blkcipher 14724 1 ecb lsmod: ath5k 87424 0 lsmod: mac80211 137756 1 ath5k lsmod: cfg80211
Bug#593054: installation-reports: Inconsistent partition naming during boot
Package: installation-reports Severity: normal -- Package-specific info: Boot method: CD Image version: debian-testing-sparc-CD-1.iso, 7-5-10 build date. Date: 7-11-10 Machine: Sun Ultra 10 Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [0] Detect network card:[0] Configure network: [ ] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [E] Install base system:[0] Clock/timezone setup: [0] User/password setup:[0] Install tasks: [0] Install boot loader:[0] Overall install:[E] Comments/Problems: linux-image-2.6.32-5-sparc64 was selected for installation. System would not reboot. It ended up in openboot at the “ok” prompt. Last message was “Fast Data Access MMU Miss” (WOW. This STILL has not been fixed). I assumed this was the same problem as with the 02-08-2010 build. The problem was ameliorated then in terms of “fixing” bugs(569719, related = 565639 562594). Did so again: Did rescue into an installer shell within hda2. chroot /target mount /dev/hda1 /boot silo -u -f Then attempted to reboot. The boot process could not find “/dev/hda2” for root. It had been renamed “/dev/sda2” in the boot environment. But it was still /dev/hda2 on the disk. I changed hda2 to sda2 in /boot/silo.conf . This allowed the boot sequence to complete. Now I am left with disk partitions named sda* instead of hda*. What is up with this? Are we changing naming conventions? Will this inconsistency be fixed? Thanks. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20090123lenny6 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == umame -a: Linux athlon 2.6.26-2-486 #1 Sat Dec 26 08:37:39 UTC 2009 i686 unknown lspci -knn: 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 02) lspci -knn: 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305] lspci -knn: 00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 22) lspci -knn: Kernel driver in use: parport_pc lspci -knn: Kernel modules: parport_pc lspci -knn: 00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10) lspci -knn: Kernel driver in use: VIA_IDE lspci -knn: Kernel modules: via82cxxx lspci -knn: 00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller [1106:3038] (rev 10) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 30) lspci -knn: 00:08.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 08) lspci -knn: 00:08.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 08) lspci -knn: 00:0b.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11) lspci -knn: Kernel driver in use: tulip lspci -knn: Kernel modules: tulip lspci -knn: 00:0f.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01) lspci -knn: Kernel driver in use: ath5k_pci lspci -knn: Kernel modules: ath5k lspci -knn: 00:13.0 Mass storage controller [0180]: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N [1103:0004] (rev 03) lspci -knn: Kernel driver in use: HPT366_IDE lspci -knn: Kernel modules: hpt366 lspci -knn: 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] [1002:5159] lsmod: Module Size Used by lsmod: ufs63620 0 lsmod: qnx47684 0 lsmod: ntfs 180544 0 lsmod: dm_mod 45384 0 lsmod: md_mod 65940 0 lsmod: xfs 446836 0 lsmod: reiserfs 187264 0 lsmod: jfs 148188 0 lsmod: ext3 103688
Bug#592924: os-prober MINIX detection
Hi Joey, Thanks for your advice, retaining the old check is very reasonable. Another patch will be sent to GRUB very soon, to utilize its result. I've modified the patch: Index: packages/os-prober/os-probes/mounted/x86/80minix === --- packages/os-prober/os-probes/mounted/x86/80minix(revision 64312) +++ packages/os-prober/os-probes/mounted/x86/80minix(working copy) @@ -7,11 +7,20 @@ dir=$2 type=$3 -if [ $type = minix ] [ -f $dir/minix ]; then - # XXX will chain loading work? -label=$(count_next_label Minix) - result $partition:Minix:$label:chain - exit 0 +if [ $type = minix ] || [ $type = ext2 ] ; then + if [ -f $dir/minix ] || [ -e $dir/boot/image_big ]; then + if [ -e $dir/boot/image_latest ]; then + boot=minix + else + boot=chain + fi + + label=$(count_next_label Minix) + result $partition:Minix:$label:$boot + exit 0 + else + exit 1 + fi else exit 1 fi -- Best Regards! Fam Zheng
Bug#590575: same problem
Hello! I have the same problem with the weekly build from 09-Aug-2010, also on a Sunblade 100. Regards, Etienne -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/col115-w44e8f592289b5dc5d0364ad0...@phx.gbl
Bug#593097: Telugu (te) translation for win32-loader/l10n/po/te.po
Package: win32-loader Severity: normal Tags: l10n Telugu (te) translation for win32-loader/l10n/po/te.po This is part of D-I level 3. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (800, 'unstable'), (500, 'testing-proposed-updates') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores) Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash msgid msgstr Project-Id-Version: \n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2009-01-03 22:10+\n PO-Revision-Date: \n Last-Translator: Veeven vee...@gmail.com\n Language-Team: \n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Poedit-Language: Telugu\n X-Poedit-Country: INDIA\n #. translate: #. This must be a valid string recognised by Nsis. If your #. language is not yet supported by Nsis, please translate the #. missing Nsis part first. #. #: win32-loader.sh:36 #: win32-loader.c:39 msgid LANG_ENGLISH msgstr #. translate: #. This must be the string used by GNU iconv to represent the charset used #. by Windows for your language. If you don't know, check #. [wine]/tools/wmc/lang.c, or http://www.microsoft.com/globaldev/reference/WinCP.mspx #. #. IMPORTANT: In the rest of this file, only the subset of UTF-8 that can be #. converted to this charset should be used. #: win32-loader.sh:52 msgid windows-1252 msgstr విండోస్-1252 #. translate: #. Charset used by NTLDR in your localised version of Windows XP. If you #. don't know, maybe http://en.wikipedia.org/wiki/Code_page helps. #: win32-loader.sh:57 msgid cp437 msgstr #. translate: #. The name of your language _in English_ (must be restricted to ascii) #: win32-loader.sh:67 msgid English msgstr ఆంగ్లం #. translate: #. IMPORTANT: only the subset of UTF-8 that can be converted to NTLDR charset #. (e.g. cp437) should be used in this string. If you don't know which charset #. applies, limit yourself to ascii. #: win32-loader.sh:81 msgid Debian Installer msgstr డెబియన్ స్ధాపకి #. translate: #. The nlf file for your language should be found in #. /usr/share/nsis/Contrib/Language files/ #. #: win32-loader.c:68 msgid English.nlf msgstr #: win32-loader.c:71 msgid Debian-Installer Loader msgstr #: win32-loader.c:72 msgid Cannot find win32-loader.ini. msgstr win32-loader.ini దొరకలేదు. #: win32-loader.c:73 msgid win32-loader.ini is incomplete. Contact the provider of this medium. msgstr #: win32-loader.c:74 msgid This program has detected that your keyboard type is \$0\. Is this correct? msgstr #: win32-loader.c:75 msgid Please send a bug report with the following information:\n \n - Version of Windows.\n - Country settings.\n - Real keyboard type.\n - Detected keyboard type.\n \n Thank you. msgstr #: win32-loader.c:76 msgid There doesn't seem to be enough free disk space in drive $c. For a complete desktop install, it is recommended to have at least 3 GB. If there is already a separate disk or partition to install Debian, or if you plan to replace Windows completely, you can safely ignore this warning. msgstr #: win32-loader.c:77 msgid Error: not enough free disk space. Aborting install. msgstr పొరపాటు: తగినంత డిస్కు జాగా లేదు. స్థాపనని ఆపేస్తున్నాం. #: win32-loader.c:78 msgid This program doesn't support Windows $windows_version yet. msgstr ఈ ఉపకరణం ఇంకా విండోస్ $windows_version కి తోడ్పాటునివ్వదు. #: win32-loader.c:79 msgid The version of Debian you're trying to install is designed to run on modern, 64-bit computers. However, your computer is incapable of running 64-bit programs.\n \n Use the 32-bit (\i386\) version of Debian, or the Multi-arch version which is able to install either of them.\n \n This installer will abort now. msgstr #: win32-loader.c:80 msgid Your computer is capable of running modern, 64-bit operating systems. However, the version of Debian you're trying to install is designed to run on older, 32-bit hardware.\n \n You may still proceed with this install, but in order to take the most advantage of your computer, we recommend that you use the 64-bit (\amd64\) version of Debian instead, or the Multi-arch version which is able to install either of them.\n \n Would you like to abort now? msgstr #. translate: #. system partition and boot partition are defined by Microsoft to mean the opposite of what a #. normal person would expect they mean, so please keep the quotes, and translate them as literally #. as possible. Also, I suggest you use the same term used in http://support.microsoft.com/kb/314470 #. if that is available for your language. #. #: win32-loader.c:88 msgid Unable to find \system partition\, assuming it is the same as the \boot partition\ ($c). msgstr #: win32-loader.c:89 #: win32-loader.c:95 msgid Select install mode: msgstr స్థాపన పద్ధతిని ఎంచుకోండి: #: win32-loader.c:90 msgid Normal mode. Recommended for most users. msgstr సాధారణ రీతి. చాలా మంది వాడుకరులకు సిఫారసు చేయబడింది.
Bug#593105: tasksel: Please add a Smartphone task
Package: tasksel Version: 2.82 Severity: wishlist Tags: d-i patch Hi, A Smartphone task providing a lightweight and small-screen-optimized dekstop environment (e17 might be a good candidate) as well as smartphone specific software (FreeSmartphone.org task, for instance) would be a good thing to have in tasksel. Here is a patch providing such a task, although its content and the way it is implemented might be discussable. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (120, 'unstable'), (105, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.35-rc3+ (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages tasksel depends on: ii aptitude 0.6.3-3terminal-based package manager (te ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii liblocale-gettext-perl1.05-6 Using libc functions for internati ii tasksel-data 2.82 Official tasks used for installati tasksel recommends no packages. tasksel suggests no packages. -- debconf information excluded From bd2031bedd76d5adc62ae00c216a6a6c47db39fa Mon Sep 17 00:00:00 2001 From: Thibaut Girka t...@sitedethib.com Date: Sun, 15 Aug 2010 13:58:25 +0200 Subject: [PATCH] Add smartphone task --- Makefile |5 + info/smartphone.postinst |8 tasks/smartphone | 21 + tasks/smartphone-gta02 | 18 ++ tests/smartphone | 31 +++ 5 files changed, 83 insertions(+), 0 deletions(-) create mode 100644 info/smartphone.postinst create mode 100644 tasks/smartphone create mode 100644 tasks/smartphone-gta02 create mode 100644 tests/smartphone diff --git a/Makefile b/Makefile index bdff344..af55cf6 100644 --- a/Makefile +++ b/Makefile @@ -49,6 +49,8 @@ install: install-data: install -d $(DESTDIR)$(TASKDIR) \ $(DESTDIR)/usr/lib/tasksel/tests + install -d $(DESTDIR)$(TASKDIR) \ + $(DESTDIR)/usr/lib/tasksel/info install -m 0644 $(TASKDESC) $(DESTDIR)$(TASKDIR) for test in tests/*; do \ [ $$test = tests/new-install ] continue; \ @@ -56,6 +58,9 @@ install-data: [ $$test = tests/lang ] continue; \ install -m 755 $$test $(DESTDIR)/usr/lib/tasksel/tests/; \ done + for script in info/*; do \ + install -m 755 $$script $(DESTDIR)/usr/lib/tasksel/info/; \ + done for package in packages/*; do \ [ $$package = packages/list ] continue; \ install -m 755 $$package $(DESTDIR)/usr/lib/tasksel/packages/; \ diff --git a/info/smartphone.postinst b/info/smartphone.postinst new file mode 100644 index 000..915fda1 --- /dev/null +++ b/info/smartphone.postinst @@ -0,0 +1,8 @@ +#/bin/sh +. /usr/share/debconf/confmodule + +db_get passwd/username +if [ -n $RET ]; then + sed -i -r -e s,^NODM_ENABLED=.*,NODM_ENABLED=true, \ + -e s,^NODM_USER=.*,NODM_USER=$RET, /etc/default/nodm +fi diff --git a/tasks/smartphone b/tasks/smartphone new file mode 100644 index 000..6969fef --- /dev/null +++ b/tasks/smartphone @@ -0,0 +1,21 @@ +Task: smartphone +Section: user +Relevance: 8 +Test-smartphone: 1 +Description: SmartPhone + This task installs software useful for a smartphone. +Key: + xorg + xserver-xorg-video-all + xserver-xorg-input-all + desktop-base + menu + e17 + nodm +Packages: list + fso-frameworkd + fso-utils +# Other stuff + xdg-utils + anacron + vala-terminal diff --git a/tasks/smartphone-gta02 b/tasks/smartphone-gta02 new file mode 100644 index 000..b1717c5 --- /dev/null +++ b/tasks/smartphone-gta02 @@ -0,0 +1,18 @@ +Task: smartphone-gta02 +Relevance: 8 +Section: user +Enhances: smartphone +Test-smartphone: GTA02 +Description: Environment for GTA02 + Hey, that rox TODO +Key: + fso-config-gta02 +Packages: list +# xserver-xorg-input-tslib + xserver-xorg-video-glamo + mtd-utils +# fso-gpsd + fso-gsmd + fso-abyss + zhone + foxtrotgps diff --git a/tests/smartphone b/tests/smartphone new file mode 100644 index 000..99d4855 --- /dev/null +++ b/tests/smartphone @@ -0,0 +1,31 @@ +#!/bin/sh +# Causes a task to be selected if the machine appears to be a smartphone. +set -e + +#TODO: more generic test? +# probably not, since we want device-specific things + +machine=$(grep ^Hardware /proc/cpuinfo | sed 's/Hardware\s*:\s*//') + +case $machine in + GTA02) + ;; + *) + # Machine not found + exit 3 + ;; +esac + +if [ $TESTING_ENHANCER ]; then + if [ $machine = $2 ]; then + exit 0 # Mark for installation + else + exit 1 # Do not mark for installation + fi +else + if [ $NEW_INSTALL ]; then + exit 2 # Mark for
Bug#593108: hw-detect: Install mmc-modules automatically if needed
Package: hw-detect Severity: minor Tags: patch Some devices don't have a hard drive. Instead of manually specifying modules for each device, it might be possible to guess which device needs additional modules. This patch implements one way to do this, by installing mmc-modules if no disk are found. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (120, 'unstable'), (105, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.35-rc3+ (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash From c784989b10d3e72601e59a8c73723166684fd12d Mon Sep 17 00:00:00 2001 From: Thibaut Girka t...@sitedethib.com Date: Sun, 15 Aug 2010 13:30:38 +0200 Subject: [PATCH 1/9] hw-detect: install mmc-modules if no disks are found --- packages/hw-detect/hw-detect.sh |7 +++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/packages/hw-detect/hw-detect.sh b/packages/hw-detect/hw-detect.sh index 3e49a42..32483c9 100755 --- a/packages/hw-detect/hw-detect.sh +++ b/packages/hw-detect/hw-detect.sh @@ -29,6 +29,13 @@ if [ -d /sys/bus/pci/devices ] \ anna-install virtio-modules || true fi +# Install mmc modules if no other disks are found +# (ex: embedded device with µSD storage) +# TODO: more checks? move that to disk-detect? +if [ -z $(list-devices disk) ]; then + anna-install mmc-modules || true +fi + if [ -x /sbin/depmod ]; then depmod -a /dev/null 21 || true fi -- 1.7.1
Bug#593109: hw-detect: Register g_ether after loading it
Package: hw-detect Severity: minor Tags: patch For some (well, probably only the Neo FreeRunner), g_ether is automatically loaded by the installer, but it isn't loaded by the installed system. This patch registers g_ether, so that we can ssh to the device after installation. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (120, 'unstable'), (105, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.35-rc3+ (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash From c04f45ee97dff8e82031e262180057d49e112f91 Mon Sep 17 00:00:00 2001 From: Thibaut Girka t...@sitedethib.com Date: Sun, 15 Aug 2010 13:31:13 +0200 Subject: [PATCH 2/9] hw-detect: register module g_ether after loading it --- packages/hw-detect/hw-detect.sh |1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/packages/hw-detect/hw-detect.sh b/packages/hw-detect/hw-detect.sh index 32483c9..3fedfe4 100755 --- a/packages/hw-detect/hw-detect.sh +++ b/packages/hw-detect/hw-detect.sh @@ -216,6 +216,7 @@ if [ -d /sys/bus/platform/devices/s3c2440-usbgadget -o \ log Detected S3C2410/S3C2440 SoC, loading g_ether load_module g_ether + register-module g_ether fi # If using real hotplug, re-run the rc scripts to pick up new modules. -- 1.7.1
Bug#512546: Ethernet card not found
Package: installation-reports Severity: importand Hi kernel team, I am promoting Debian edu to one of the schools in my region. And found their machines are all has a built-in intel 82567LM-3 e1000e NIC which effected by this bug. I can confirmed the patch provided by Holger solved the problem. But it would be much better to support this network card by default for our users especially the school teachers and students in my region. May I know what's current status for this bug? Best regards, -Andrew -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100815152741.5138.97580.report...@magabahi
Bug#586221: flash-kernel-installer/uboot-installer patch
Here is a patch to do that (works only for the GTA02 for now).
From 10351531703fd014d460f67aa331873060cc062f Mon Sep 17 00:00:00 2001
From: Thibaut Girka t...@sitedethib.com
Date: Sun, 15 Aug 2010 13:38:33 +0200
Subject: [PATCH 3/9] flash-kernel-installer: add uboot-installer
---
packages/flash-kernel/check.d/_numbers |1 +
packages/flash-kernel/check.d/ext2_boot| 64 +
packages/flash-kernel/debian/control |2 +-
.../debian/flash-kernel-installer.di-numbers |1 +
.../debian/flash-kernel-installer.install |1 +
.../debian/flash-kernel-installer.postinst |1 +
.../debian/flash-kernel-installer.templates| 71 ++
packages/flash-kernel/debian/rules |2 +-
packages/flash-kernel/uboot-installer | 146
9 files changed, 287 insertions(+), 2 deletions(-)
create mode 100644 packages/flash-kernel/check.d/_numbers
create mode 100755 packages/flash-kernel/check.d/ext2_boot
create mode 100644 packages/flash-kernel/debian/flash-kernel-installer.di-numbers
create mode 100644 packages/flash-kernel/debian/flash-kernel-installer.install
create mode 100644 packages/flash-kernel/uboot-installer
diff --git a/packages/flash-kernel/check.d/_numbers b/packages/flash-kernel/check.d/_numbers
new file mode 100644
index 000..18d7600
--- /dev/null
+++ b/packages/flash-kernel/check.d/_numbers
@@ -0,0 +1 @@
+05 ext2_boot
diff --git a/packages/flash-kernel/check.d/ext2_boot b/packages/flash-kernel/check.d/ext2_boot
new file mode 100755
index 000..7109543
--- /dev/null
+++ b/packages/flash-kernel/check.d/ext2_boot
@@ -0,0 +1,64 @@
+#!/bin/sh
+# Check that the boot partition is of type ext2, and that it is marked as
+# bootable. Used for Openmoko FreeRunner (GTA02).
+
+machine=$(sed '/^Hardware/ {s/^Hardware\s*:\s*//;p}' /proc/cpuinfo)
+case $machine in
+ GTA02)
+ ;;
+ *)
+ exit 0
+ ;;
+esac
+
+. /lib/partman/lib/base.sh
+
+for dev in $DEVICES/*; do
+ [ -d $dev ] || continue
+ cd $dev
+ open_dialog PARTITIONS
+ while { read_line num id size type fs path name; [ $id ]; }; do
+ [ $fs != free ] || continue
+ [ -f $id/method ] || continue
+ [ -f $id/acting_filesystem ] || continue
+ [ -f $id/mountpoint ] || continue
+ mountpoint=$(cat $id/mountpoint)
+ filesystem=$(cat $id/acting_filesystem)
+ if [ $mountpoint = / ]; then
+ root_fs=$filesystem
+ root_type=$type
+ root_path=$path
+ if [ -f $id/bootable ]; then
+root_bootable=yes
+ fi
+ elif [ $mountpoint = /boot ]; then
+ boot_fs=$filesystem
+ boot_type=$type
+ boot_path=$path
+ if [ -f $id/bootable ]; then
+boot_bootable=yes
+ fi
+ fi
+ done
+ close_dialog
+done
+
+# If no separate boot partition exists root acts as boot
+if [ -z $boot_path ]; then
+ boot_fs=$root_fs
+ boot_type=$root_type
+ boot_path=$root_path
+ boot_bootable=$root_bootable
+fi
+
+# We require an ext2 filesystem to boot
+if [ $boot_fs != ext2 ]; then
+ db_set flash-kernel-installer/uboot/boot_not_ext2 true
+ db_input critical flash-kernel-installer/uboot/boot_not_ext2 || true
+ db_go || true
+ db_get flash-kernel-installer/uboot/boot_not_ext2
+ if [ $RET = true ]; then
+ exit 1
+ fi
+fi
+
diff --git a/packages/flash-kernel/debian/control b/packages/flash-kernel/debian/control
index ce959a2..7d1fc1a 100644
--- a/packages/flash-kernel/debian/control
+++ b/packages/flash-kernel/debian/control
@@ -3,7 +3,7 @@ Section: utils
Priority: optional
Maintainer: Debian Install System Team debian-boot@lists.debian.org
Uploaders: Martin Michlmayr t...@cyrius.com, Wouter Verhelst wou...@debian.org
-Build-Depends: debhelper (= 7.3.10)
+Build-Depends: debhelper (= 7.3.10), dh-di
Standards-Version: 3.7.2
Vcs-Svn: svn://svn.debian.org/d-i/trunk/packages/flash-kernel
diff --git a/packages/flash-kernel/debian/flash-kernel-installer.di-numbers b/packages/flash-kernel/debian/flash-kernel-installer.di-numbers
new file mode 100644
index 000..0110b8d
--- /dev/null
+++ b/packages/flash-kernel/debian/flash-kernel-installer.di-numbers
@@ -0,0 +1 @@
+check.d lib/partman
diff --git a/packages/flash-kernel/debian/flash-kernel-installer.install b/packages/flash-kernel/debian/flash-kernel-installer.install
new file mode 100644
index 000..cd38ae6
--- /dev/null
+++ b/packages/flash-kernel/debian/flash-kernel-installer.install
@@ -0,0 +1 @@
+uboot-installer usr/share/flash-kernel-installer
diff --git a/packages/flash-kernel/debian/flash-kernel-installer.postinst b/packages/flash-kernel/debian/flash-kernel-installer.postinst
index 22bc6d1..164e464 100755
--- a/packages/flash-kernel/debian/flash-kernel-installer.postinst
+++ b/packages/flash-kernel/debian/flash-kernel-installer.postinst
@@ -5,6 +5,7 @@
set -e
. /usr/share/debconf/confmodule
+. /usr/share/flash-kernel-installer/uboot-installer
log() {
logger -t flash-kernel-installer $@
diff --git a/packages/flash-kernel/debian/flash-kernel-installer.templates
Processed: tagging 512546
Processing commands for cont...@bugs.debian.org: tags 512546 + patch confirmed Bug #512546 [installation-reports] installation-reports: Ethernet card not found Added tag(s) confirmed and patch. thanks Stopping processing here. Please contact me if you need assistance. -- 512546: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=512546 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12818862496140.transcr...@bugs.debian.org
Processed: your mail
Processing commands for cont...@bugs.debian.org: tags 586221 + patch Bug #586221 [flash-kernel-installer] Please provide a way to configure U-Boot at installation time Added tag(s) patch. End of message, stopping processing here. Please contact me if you need assistance. -- 586221: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=586221 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.12818866608183.transcr...@bugs.debian.org
Re: please hint udev
On 08/06/2010 04:04 PM, Marco d'Itri wrote: It will also fix the symptoms of #586404. debian-boot, I don't see any reply of you, yet? Kind regards, Philipp Kern -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4c681e10.30...@debian.org
Re: please hint udev
On Sun, 2010-08-15 at 19:04 +0200, Philipp Kern wrote: On 08/06/2010 04:04 PM, Marco d'Itri wrote: It will also fix the symptoms of #586404. debian-boot, I don't see any reply of you, yet? otavio acked the unblocking of 160-1 on IRC, which migrated a few days ago. Regards, Adam -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1281893247.29656.1862.ca...@kaa.jungle.aubergine.my-net-space.net
Processing of linux-kernel-di-armel-2.6_1.46_armel.changes
linux-kernel-di-armel-2.6_1.46_armel.changes uploaded successfully to localhost along with the files: linux-kernel-di-armel-2.6_1.46.dsc linux-kernel-di-armel-2.6_1.46.tar.gz kernel-image-2.6.32-5-iop32x-di_1.46_armel.udeb nic-modules-2.6.32-5-iop32x-di_1.46_armel.udeb nic-shared-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ppp-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ide-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ide-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb scsi-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb loop-modules-2.6.32-5-iop32x-di_1.46_armel.udeb nls-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb btrfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ext2-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ext3-modules-2.6.32-5-iop32x-di_1.46_armel.udeb ext4-modules-2.6.32-5-iop32x-di_1.46_armel.udeb isofs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb jffs2-modules-2.6.32-5-iop32x-di_1.46_armel.udeb jfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb reiserfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb fat-modules-2.6.32-5-iop32x-di_1.46_armel.udeb md-modules-2.6.32-5-iop32x-di_1.46_armel.udeb multipath-modules-2.6.32-5-iop32x-di_1.46_armel.udeb usb-modules-2.6.32-5-iop32x-di_1.46_armel.udeb usb-storage-modules-2.6.32-5-iop32x-di_1.46_armel.udeb event-modules-2.6.32-5-iop32x-di_1.46_armel.udeb nic-usb-modules-2.6.32-5-iop32x-di_1.46_armel.udeb sata-modules-2.6.32-5-iop32x-di_1.46_armel.udeb core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crc-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crypto-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-iop32x-di_1.46_armel.udeb squashfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb zlib-modules-2.6.32-5-iop32x-di_1.46_armel.udeb kernel-image-2.6.32-5-ixp4xx-di_1.46_armel.udeb nic-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb nic-shared-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb ppp-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb scsi-core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb loop-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb nls-core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb btrfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb ext2-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb ext3-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb ext4-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb isofs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb jfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb reiserfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb fat-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb md-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb multipath-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb usb-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb usb-storage-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb event-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb nic-usb-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb sata-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crc-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crypto-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb ata-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb squashfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb zlib-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb beeper-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb kernel-image-2.6.32-5-kirkwood-di_1.46_armel.udeb nic-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb nic-shared-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb ppp-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb scsi-core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb loop-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb nls-core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb btrfs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb ext2-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb ext3-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb ext4-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb isofs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb jfs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb reiserfs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb fat-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb minix-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb md-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb multipath-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb usb-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb usb-storage-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb fb-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb input-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb event-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb mouse-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb nic-usb-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb sata-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb crc-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb
linux-kernel-di-armel-2.6_1.46_armel.changes is NEW
ata-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/ata-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb beeper-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/beeper-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb btrfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/btrfs-modules-2.6.32-5-iop32x-di_1.46_armel.udeb btrfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/btrfs-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb btrfs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/btrfs-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb btrfs-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/btrfs-modules-2.6.32-5-orion5x-di_1.46_armel.udeb btrfs-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/btrfs-modules-2.6.32-5-versatile-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.32-5-orion5x-di_1.46_armel.udeb cdrom-core-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.32-5-versatile-di_1.46_armel.udeb core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/core-modules-2.6.32-5-iop32x-di_1.46_armel.udeb core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/core-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/core-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb core-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/core-modules-2.6.32-5-orion5x-di_1.46_armel.udeb core-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/core-modules-2.6.32-5-versatile-di_1.46_armel.udeb crc-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crc-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crc-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb crc-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.32-5-orion5x-di_1.46_armel.udeb crc-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.32-5-versatile-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.32-5-orion5x-di_1.46_armel.udeb crypto-dm-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.32-5-versatile-di_1.46_armel.udeb crypto-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.32-5-iop32x-di_1.46_armel.udeb crypto-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb crypto-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb crypto-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.32-5-orion5x-di_1.46_armel.udeb crypto-modules-2.6.32-5-versatile-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.32-5-versatile-di_1.46_armel.udeb event-modules-2.6.32-5-iop32x-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/event-modules-2.6.32-5-iop32x-di_1.46_armel.udeb event-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/event-modules-2.6.32-5-ixp4xx-di_1.46_armel.udeb event-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb to main/l/linux-kernel-di-armel-2.6/event-modules-2.6.32-5-kirkwood-di_1.46_armel.udeb event-modules-2.6.32-5-orion5x-di_1.46_armel.udeb to
Bug#593097: Telugu (te) translation for win32-loader/l10n/po/te.po
Veeven wrote: Package: win32-loader Severity: normal Tags: l10n Telugu (te) translation for win32-loader/l10n/po/te.po This is part of D-I level 3. Hi, and thanks for your contribution, unfortunately, there are two problems with the actual situation: 1) You used an old .po version (the actual can be downloaded there [0]), so it is not complete for the sid version. Now, I committed your actual translation into the d-i svn, in order to acknowledge the actual work. :-) And I intend to close this bug when win32-loader gets uploaded. 2) [and this is actually worse] nsis is not translated into Telegu yet, which makes it impossible for win32-loader to actually use your translation on Windows hosts. Other languages are in the same situation: Asturian, Dzongkha, Kazakh, … See e.g. bugs #587208, #511625, #578501 for details. Now the actual strategy is to include the .po files in the hope that nsis gets translated once into said languages. How does that sound to you ? Cheers, OdyX -- Didier Raboud, proud Debian Maintainer (DM). CH-1020 Renens did...@raboud.com signature.asc Description: This is a digitally signed message part.
Processed: tagging 593097
Processing commands for cont...@bugs.debian.org: # Pending by rev64339 in d-i svn tags 593097 + pending Bug #593097 [win32-loader] Telugu (te) translation for win32-loader/l10n/po/te.po Added tag(s) pending. thanks Stopping processing here. Please contact me if you need assistance. -- 593097: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593097 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/handler.s.c.128190250331121.transcr...@bugs.debian.org
Bug#593109: hw-detect: Register g_ether after loading it
Quoting Thibaut GIRKA (t...@sitedethib.com): Package: hw-detect Severity: minor Tags: patch For some (well, probably only the Neo FreeRunner), g_ether is automatically loaded by the installer, but it isn't loaded by the installed system. This patch registers g_ether, so that we can ssh to the device after installation. Seems OK to commit, too. signature.asc Description: Digital signature
Bug#593146: installation-reports: Grub Config/Install gives prompts in wrong order -
Quoting Keith Ward (ke...@chaos-realm.net): Package: installation-reports Severity: important Tags: d-i When installing using the netinst, just before doing the apt software install it pops up a message box, stating that it doesn't recognise the bootloader configuration (which is odd as for one its Many thanks for your report. You should try using something else than alpha1 netinst. GRUB was changed deeply since alpha1 was released and the netinst image includes grub packages as they were by the time of that release. Could you try using either the businesscard alpha1 (GRUB ad grub-installer packages will then be those currently in testing) or, even better, the current daily builds and particularly the *netboot* daily build. If that solves your issue, then I suggest you close this bug report (by sending a mail to 593146-d...@bugs.d.o). signature.asc Description: Digital signature
Bug#593108: hw-detect: Install mmc-modules automatically if needed
Quoting Thibaut GIRKA (t...@sitedethib.com): Package: hw-detect Severity: minor Tags: patch Some devices don't have a hard drive. Instead of manually specifying modules for each device, it might be possible to guess which device needs additional modules. This patch implements one way to do this, by installing mmc-modules if no disk are found. That seems simple, straightforward and I don't see any risk in committing this. Let's wait for Otavio's comment but I'd say GO for committing. signature.asc Description: Digital signature
Bug#593146: installation-reports: Grub Config/Install gives prompts in wrong order -
Christian, Thanks for that, I tried running the daily netinst just now , in a virtual machine to see what results I could get the previous reported oddities have disapeared, however with this netinst I can't complete the install as it fails to install grub on /dev/sda. netinst build: *Sun Aug 15 21:16:41 UTC 2010*. Checking tty4, it states grub-probe error - no such disk Auto-detection of a filesystem module failed, specify the module explicitly Running 'grub-install --no-floppy --force /dev/sda' failed Do you want me to file a new installation report for this, and close this bug? Regards, Keith signature.asc Description: OpenPGP digital signature
Filter shekan Usa Nl
Forosh Vpn ba gheymat monaseb va server haye Usa va Nl Jahate daryafte account test be addresss zir email konid email : Alborz33 @ gmail.com 1 Mahe (Usa , Nl) 3500 Toman . 3 Mahe (Usa , Nl) 9500 Toman . 6 Mahe (Usa , Nl) 17000 Toman . 12 Mahe (Usa , Nl) 29000 Toman . jahate daryafte shomare kart mitavanid az tarighe arsale email ya tamas Telefoni ba shomare 09365440439
Filter shekan Usa Nl
Forosh Vpn ba gheymat monaseb va server haye Usa va Nl Jahate daryafte account test be addresss zir email konid email : Alborz33 @ gmail.com 1 Mahe (Usa , Nl) 3500 Toman . 3 Mahe (Usa , Nl) 9500 Toman . 6 Mahe (Usa , Nl) 17000 Toman . 12 Mahe (Usa , Nl) 29000 Toman . jahate daryafte shomare kart mitavanid az tarighe arsale email ya tamas Telefoni ba shomare 09365440439
Bug#593097: Telugu (te) translation for win32-loader/l10n/po/te.po
2010/8/16 Didier 'OdyX' Raboud did...@raboud.com Veeven wrote: Package: win32-loader Severity: normal Tags: l10n Telugu (te) translation for win32-loader/l10n/po/te.po This is part of D-I level 3. Hi, and thanks for your contribution, unfortunately, there are two problems with the actual situation: 1) You used an old .po version (the actual can be downloaded there [0]), so it is not complete for the sid version. Now, I committed your actual translation into the d-i svn, in order to acknowledge the actual work. :-) And I intend to close this bug when win32-loader gets uploaded. I created a new .po from the POT file found here: http://d-i.debian.org/l10n-stats/level3/POT/win32-loader_l10n_po.pot Please find the attached. 2) [and this is actually worse] nsis is not translated into Telegu yet, which makes it impossible for win32-loader to actually use your translation on Windows hosts. Other languages are in the same situation: Asturian, Dzongkha, Kazakh, … See e.g. bugs #587208, #511625, #578501 for details. Now the actual strategy is to include the .po files in the hope that nsis gets translated once into said languages. How does that sound to you ? That is OK. I'll try to contribute to nsis whenever possible. Thanks, Veeven. msgid msgstr Project-Id-Version: \n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2010-05-05 16:09+0200\n PO-Revision-Date: \n Last-Translator: Veeven vee...@gmail.com\n Language-Team: \n Language: \n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Poedit-Language: Telugu\n X-Poedit-Country: INDIA\n #. translate: #. This must be a valid string recognised by Nsis. If your #. language is not yet supported by Nsis, please translate the #. missing Nsis part first. #. #: win32-loader.sh:36 #: win32-loader.c:39 msgid LANG_ENGLISH msgstr #. translate: #. This must be the string used by GNU iconv to represent the charset used #. by Windows for your language. If you don't know, check #. [wine]/tools/wmc/lang.c, or http://www.microsoft.com/globaldev/reference/WinCP.mspx #. #. IMPORTANT: In the rest of this file, only the subset of UTF-8 that can be #. converted to this charset should be used. #: win32-loader.sh:52 msgid windows-1252 msgstr విండోస్-1252 #. translate: #. Charset used by NTLDR in your localised version of Windows XP. If you #. don't know, maybe http://en.wikipedia.org/wiki/Code_page helps. #: win32-loader.sh:57 msgid cp437 msgstr cp437 #. translate: #. The name of your language _in English_ (must be restricted to ascii) #: win32-loader.sh:67 msgid English msgstr ఆంగ్లం #. translate: #. IMPORTANT: only the subset of UTF-8 that can be converted to NTLDR charset #. (e.g. cp437) should be used in this string. If you don't know which charset #. applies, limit yourself to ascii. #: win32-loader.sh:81 msgid Continue with install process msgstr స్థాపన ప్రక్రియని కొనసాగించండి #. translate: #. The nlf file for your language should be found in #. /usr/share/nsis/Contrib/Language files/ #. #: win32-loader.c:68 msgid English.nlf msgstr #: win32-loader.c:71 msgid Installer Loader msgstr #: win32-loader.c:72 msgid Cannot find win32-loader.ini. msgstr win32-loader.ini దొరకలేదు. #: win32-loader.c:73 msgid win32-loader.ini is incomplete. Contact the provider of this medium. msgstr #: win32-loader.c:74 msgid This program has detected that your keyboard type is \$0\. Is this correct? msgstr #: win32-loader.c:75 msgid Please send a bug report with the following information:\n \n - Version of Windows.\n - Country settings.\n - Real keyboard type.\n - Detected keyboard type.\n \n Thank you. msgstr #: win32-loader.c:76 msgid There doesn't seem to be enough free disk space in drive $c. For a complete desktop install, it is recommended to have at least 3 GB. If there is already a separate disk or partition for this install, or if you plan to replace Windows completely, you can safely ignore this warning. msgstr #: win32-loader.c:77 msgid Error: not enough free disk space. Aborting install. msgstr పొరపాటు: తగినంత డిస్కు జాగా లేదు. స్థాపనని ఆపేస్తున్నాం. #: win32-loader.c:78 msgid This program doesn't support Windows $windows_version yet. msgstr ఈ ఉపకరణం ఇంకా విండోస్ $windows_version కి తోడ్పాటునివ్వదు. #: win32-loader.c:79 msgid The system version you're trying to install is designed to run on modern, 64-bit computers. However, your computer is incapable of running 64-bit programs.\n \n Use the 32-bit (\i386\) version, or the Multi-arch version which is able to install either of them.\n \n This installer will abort now. msgstr #: win32-loader.c:80 msgid Your computer is capable of running modern, 64-bit operating systems. However, the system version you're trying to install is designed to run on older, 32-bit hardware.\n \n You may still proceed with this install, but in order to take the most advantage of your computer, we recommend that you use the 64-bit (\amd64\)
