Bug#295597: emacs21: incorrect modifier key behaviour (ISO_Level3_Shift vs. Meta)
Quoting Benjamin Herrenschmidt [EMAIL PROTECTED]: What exactly is ISO_Level3_Shift? I use it to obtain additional symbols, I map it to the left Alt key (which I don't map to Alt of course), that's how MacOS obtains the |,{,},etc... on intl keyboards (read: non-us). It sort-of is the new way to do it instead of switching groups with Mode_switch. A bunch of intl keymaps are supposed to use it nowadays, I suspect AltGr will be defined as that in the future. Something related to xkb has changed in recent debian-patched Xfree releases as well as in Xorg 6.8.1+ that made necessary to apply the patch I mentioned to Emacs. That is, I can't obtain the symbols that are normally obtained with an ISO_Level3_Shift + key combo. Emacs interprets it apparently as Meta-key. When did this bug first show up? We applied a patch recently which was related to xkb map. It has not been applied to XEmacs yet. Ah, could be ! I think it didn't happen before my upgrade a few days ago, but then, I'm also just switching from xemacs to emacs so it's a bit difficult to say. I suppose I could be emacs myself without the patch to confirm that, but I would need some help I suppose, as I've never been close to trying to build that monster before :) The patch was introduced in 21.3+1-8. Could you please grab 21.3+1-7 from snapshot.debian.net and tell us if it changes anything? That said, I suspect you could have to change your settings for this new compliance. Unfortunately, I have zero knowledge about xkb but the originator of the said patch might help us. Cheers, -- Jérôme Marant
Bug#295594: nautilus: With two CD-ROM drives, order is not clear
Am Mittwoch, den 16.02.2005, 23:31 +0100 schrieb Sebastien Bacher: This could probably be merged with #288174. Possibly. Please note that its not entirely the same problem. Its slightly different (I reported the other bug as well), though if it really is in gnome-vfs instead of nautilus itself, both can probably be solved in one go. Bye, Mike -- |=| Michael Piefel |=| Member of the Debian project
Bug#295204: Each egroupware page is empty
On Thu, Feb 17, 2005 at 12:04:19AM +0100, Peter Eisentraut wrote: steinm wrote: I just installed a fresh version of debian testing and than updated to unstable. egroupware worked without problems. Since the last php4 update to php4-4.3.10-4 egroupware lets one login but each page after it is plain white without any content. Do you have turck-mmcache installed by any chance? No, never had. But guess what, since today it is working again. This maybe related to the new version of php4 came in yesterday or the day before yesterday. Uwe -- MMK GmbH, Universitaetsstr. 11, 58097 Hagen [EMAIL PROTECTED] Tel: +2331 840446Fax: +2331 843920 signature.asc Description: Digital signature
Bug#292253: reassigning to bash
reassign 292253 bash retitle 292253 bash is wrong to do tilde expansion on elements of PATH thanks -- Thomas Hood [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#267628: kernel-image-2.6.7-1-686: T41p can't standby with ACPI
On Wed, 16 Feb 2005, Jerry Quinn wrote: maximilian attems wrote: On Sun, 22 Aug 2004, Jerry Quinn wrote: echo standby /sys/power/state Causes the screen to blank out, then immediately resume. In does kernel-image-2.6.10 from unstable work? Nope. mDNSResponder seems to prevent the sleep. can you try without it? -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295647: ~/.icewm/keys can not accept LOCALE parameter
Package: icewm Version: 1.2.20-1 Severity: wishlist Tags: l10n Sometimes we need to run programs in different locale. for example, run crxvt-big5 in zh_TW.Big5 locale, or run mozilla-firefox in zh_TW.UTF-8 locale. I put fallow lines in my ~/.icewm/keys: key Super+f LC_ALL=zh_TW.UTF-8 mozilla-firefox key Super+t LC_ALL=zh_TW.Big5 crxvt-big5 But it doesn't work. I think it is a bug in icewm, Please consider to fix it. Thanks! -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-686 Locale: LANG=C, LC_CTYPE=zh_TW.UTF-8 Versions of packages icewm depends on: ii icewm-common 1.2.20-1wonderful Win95-OS/2-Motif-like wi ii imlib1 1.9.14-14 imaging library for X and X11 (usi ii libc62.3.2.ds1-16GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4.firefly generic font configuration library ii libfreetype6 2.1.7-2.2 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.1-5 GCC support library ii libice6 4.3.0.dfsg.1-4 Inter-Client Exchange library ii libjpeg626b-9The Independent JPEG Group's JPEG ii libpng10-0 1.0.18-1PNG library, older version - runti ii libsm6 4.3.0.dfsg.1-4 X Window System Session Management ii libtiff4 3.6.1-1.1 Tag Image File Format library ii libungif4g 4.1.3-1 shared library for GIF images (run ii libx11-6 4.3.0.dfsg.1-6 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-6 X Window System miscellaneous exte ii libxft2 2.1.2-6.firefly FreeType-based font drawing librar ii libxrandr2 4.3.0.dfsg.1-4 X Window System Resize, Rotate and ii libxrender1 0.8.3-7 X Rendering Extension client libra ii xlibs4.3.0.dfsg.1-4 X Window System client libraries m ii zlib1g 1:1.2.1.1-5 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#291466: mailman: Insisting on deleting qfiles is a bug
Followup-For: Bug #291466 Package: mailman Version: 2.1.5-5.backports.org.3 mailman.preinst checks for any files under /var/lib/mailman/qfiles and aborts installation if any are found. Debconf message then advises to simply delete the qfiles if needs be. In many situations this is not a valid option (loss of mail). An alternative that should be documented is to first backup and remove the qfiles, perform the upgrade, then restore the backed up qfiles whilst mailman is NOT running, and then run /usr/lib/mailman/bin/update to ensure the qfiles are in latest format. After that mailman may safely be restarted. This worked for me anyway (upgrading backports version, but the fact it was a backport is irrelevant to this problem and suggested solution). -- System Information Debian Release: 3.0 Architecture: i386 Kernel: Linux bowl 2.4.29 #1 SMP Wed Jan 19 17:44:40 GMT 2005 i686 Locale: LANG=C, LC_CTYPE=en_GB Versions of packages mailman depends on: ii apache 1.3.26-0woody6Versatile, high-performance HTTP s ii apache [httpd] 1.3.26-0woody6Versatile, high-performance HTTP s ii apache-ssl [httpd] 1.3.26.1+1.48-0woody3 Versatile, high-performance HTTP s ii cron 3.0pl1-72 management of regular background p ii debconf1.2.35Debian configuration management sy ii exim-tls [mail-tra 3.35-3woody3 Exim Mailer - with TLS (SSL) suppo ii libc6 2.2.5-11.8GNU C Library: Shared libraries an ii logrotate 3.5.9-8 Log rotation utility ii pwgen 2.01-3Automatic Password generation ii python 2.1.3-3.2 An interactive object-oriented scr ii python2.2 2.2.1-4.7 An interactive object-oriented scr ii ucf1.07 Update Configuration File: preserv -- - Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/ Finger athan(at)fysh.org for PGP key And it's me who is my enemy. Me who beats me up. Me who makes the monsters. Me who strips my confidence. Paula Cole - ME pgpZUdqVfzBWy.pgp Description: PGP signature
Bug#295648: GTK2.0 upgrade
package: gtk2.0-dev and friends version: 2.4.14 I was using stable with gtk1.2-dev, and I've upgraded my system to a mixed stable/testing system as it is described in the APT-HOWTO to upgrade to gtk2.0. Everything was fine, but I could not run programs which was linked to GTK2.0. It said: /usr/bin/gftp-gtk: relocation error: /usr/lib/libpangoft2-1.0.so.0: undefined symbol: pango_font_description_get_size_is_absolute I fixed this with upgrading the X system too *MANUALY*. Namely the xfree86 and xserver-xfree86 packages, if I remember well. These were NOT in the dependency tree. I don't know which package needs it (gtk2.0 or pango or atk or ?), but it's needed. I'm using Debina/Linux with localy compiled kernel 2.4.27; 3.0r4; testing/stable Levente __ Email: [EMAIL PROTECTED] Phone: +41227672276 Fax: +41227678200 Home Page: http://web.interware.hu/lekovacs Public key: http://web.interware.hu/lekovacs/CERN/public_key /\ \ /ASCII Ribbon Campaign X against HTML email vCards / \ http://arc.pasp.de/ Have Fun, Linux! 73 for all by HA5OGL. This message was generated by Sylpheed. pgpiNMew2IaWY.pgp Description: PGP signature
Bug#295649: tk8.4: spinbox widget gets stuck in infinite repeat
Package: tk8.4 Version: 8.4.9-1 Severity: normal The bug is in /usr/lib/tk8.4/spinbox.tcl. It's possible for a spinbox button to get effectively stuck down so that its action gets invoked repeatedly until the application is killed. The B1-Leave event is used to start a repeating chain of AutoScan invocations, each of which schedules the next one, continuing until some other event (like a ButtonRelease-1 or a B1-Enter) cancels the next scheduled invocation, whose ID is stored in Priv(afterId). The assumption is that a B1-Leave event means the user dragged from inside the widget to outside widget, which means the user must be trying to select a bunch of text, which ought to continue scrolling as long as the button is held down outside the widget. But some window managers can cause a B1-Leave event without any dragging and without any corresponding button release. In my case, olvwm allows me to select a window (to give it the focus) by clicking on it while holding down the WMGrab modifier (which I have configured to be Control, but I don't think that's relevant). As a side effect, this causes a B1-Leave event (I don't know why), but no button release. Therefore, a never-ending chain of AutoScan invocations is launched, with no immediate possibility of a ButtonRelease-1 or a B1-Enter because the button is not even down. This background activity is invisible to the user because it has no effect on the display. However... If the user then clicks on one of the spinbox buttons, the background chain of AutoScan calls can collide with the chain of Invoke calls, because both use Priv(afterId) to store the ID of the next scheduled call. The button is supposed to trigger its -command action repeatedly as long as it is held down, and the button release triggers the cancelation of the next call. But because the ID is shared, the button release can instead end up terminating the background chain of AutoScan calls, leaving the chain of Invoke calls going forever. To reproduce this effect, run olvwm (or olwm) and the following script: #!/usr/bin/wish proc foo {} { puts stderr DEBUG foo } spinbox .foo -command foo pack .foo Click on the spinbox text area while holding down the WMGrab modifier (which I think is Alt by default), then click on one of the buttons once or twice. You should see an endless stream of DEBUG foo on stderr. More clues can be gathered by adding debug statements in /usr/lib/tk8.4/spinbox.tcl. I think perhaps AutoScan needs to check whether a text selection is actually in progress (initiated by a button press) rather than assume that a B1-Leave implies that the button is currently down. It would probably also be a good idea to use separate variables to store AutoScan's after ID and Invoke's after ID. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (900, 'testing'), (700, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.9-2-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages tk8.4 depends on: ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii tcl8.4 8.4.9-1 Tcl (the Tool Command Language) v8 ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295597: emacs21: incorrect modifier key behaviour (ISO_Level3_Shift vs. Meta)
On Thu, 2005-02-17 at 09:00 +0100, Jérôme Marant wrote: Quoting Benjamin Herrenschmidt [EMAIL PROTECTED]: What exactly is ISO_Level3_Shift? I use it to obtain additional symbols, I map it to the left Alt key (which I don't map to Alt of course), that's how MacOS obtains the |,{,},etc... on intl keyboards (read: non-us). It sort-of is the new way to do it instead of switching groups with Mode_switch. A bunch of intl keymaps are supposed to use it nowadays, I suspect AltGr will be defined as that in the future. Something related to xkb has changed in recent debian-patched Xfree releases as well as in Xorg 6.8.1+ that made necessary to apply the patch I mentioned to Emacs. Hrm... I'm using Xorg CVS HEAD... That is, I can't obtain the symbols that are normally obtained with an ISO_Level3_Shift + key combo. Emacs interprets it apparently as Meta-key. When did this bug first show up? We applied a patch recently which was related to xkb map. It has not been applied to XEmacs yet. Ah, could be ! I think it didn't happen before my upgrade a few days ago, but then, I'm also just switching from xemacs to emacs so it's a bit difficult to say. I suppose I could be emacs myself without the patch to confirm that, but I would need some help I suppose, as I've never been close to trying to build that monster before :) The patch was introduced in 21.3+1-8. Could you please grab 21.3+1-7 from snapshot.debian.net and tell us if it changes anything? Ok, it wasn't in the pool, I'll try to find it there. It could be a bug in the patch. That said, I suspect you could have to change your settings for this new compliance. Unfortunately, I have zero knowledge about xkb but the originator of the said patch might help us. I don't think I _can_ find a set of settings that will work given the way emacs is reacting but I'll investigate with the xkb folks. Ben.
Bug#295650: ITP: moomps -- Modular Object Oriented Multi-Purpose Service
Package: wnpp Severity: wishlist * Package name: moomps Version : 4.5 Upstream Author : Jean-Luc Fontaine [EMAIL PROTECTED] * URL : http://moodss.sourceforge.net * License : GPL Description : Modular Object Oriented Multi-Purpose Service moomps (Modular Object Oriented Multi-Purpose Service) is a modular monitoring daemon which sends alert emails or execute scripts when predefined thresholds are crossed. It is also possible to store data cell values history over time in a database (MySQL or ODBC). Uses configuration files created by moodss so that any number of modules can be used. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (300, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.27 Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295652: bug in hylafax server
Package: hylafax-server Version: 1:4.2.1-1 When i submit a new fax with cypheus client i found this message in syslog Feb 16 11:04:47 debian FaxQueuer[2164]: SUBMIT JOB 11 Feb 16 11:04:50 debian FaxQueuer[2183]: JOB 11: CONVERT DOCUMENT: exit status 0xff00 Feb 16 11:04:50 debian FaxQueuer[2164]: NOTIFY: bin/notify doneq/q11 no_formatter Feb 16 11:04:50 debian FaxQueuer[2164]: NOTIFY exit status: 077400 (2187) There is an error to convert file. In /var/spool/hylafax/bin/ps2fax links to file ps2fax.gs that doesn't exist. setup.cache generated by faxsetup report in a line DPSRIP='/usr/pkg/libexec/ps2fax.exe. Thank you for attention. Yuri Ganugi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295597: emacs21: incorrect modifier key behaviour (ISO_Level3_Shift vs. Meta)
Quoting Benjamin Herrenschmidt [EMAIL PROTECTED]: On Wed, 2005-02-16 at 23:19 +0100, Jérôme Marant wrote: For some reason, in X (works in console, and works fine with xemacs too), emacs keeps considering my ISO_Level3_Shift as another Meta. What exactly is ISO_Level3_Shift? I use it to obtain additional symbols, I map it to the left Alt key (which I don't map to Alt of course), that's how MacOS obtains the |,{,},etc... on intl keyboards (read: non-us). It sort-of is the new way to do it instead of switching groups with Mode_switch. A bunch of intl keymaps are supposed to use it nowadays, I suspect AltGr will be defined as that in the future. Denis, Sorry to bother you :-) Could you please help us on this issue? The problem Benjamin is encountering might be related to the patch you submitted months ago in order to make emacs compatible with latest Xfree as well as Xorg. There seems to be no problem with XEmacs which does not have your fix. I do not question the patch; maybe does Benjamin need to fix something on his side, but I'm unable to explain :-P Thanks in advance. Cheers, -- Jérôme Marant
Bug#295597: emacs21: incorrect modifier key behaviour (ISO_Level3_Shift vs. Meta)
Quoting Benjamin Herrenschmidt [EMAIL PROTECTED]: On Wed, 2005-02-16 at 23:19 +0100, Jérôme Marant wrote: For some reason, in X (works in console, and works fine with xemacs too), emacs keeps considering my ISO_Level3_Shift as another Meta. What exactly is ISO_Level3_Shift? I use it to obtain additional symbols, I map it to the left Alt key (which I don't map to Alt of course), that's how MacOS obtains the |,{,},etc... on intl keyboards (read: non-us). It sort-of is the new way to do it instead of switching groups with Mode_switch. A bunch of intl keymaps are supposed to use it nowadays, I suspect AltGr will be defined as that in the future. never been close to trying to build that monster before :) Denis, Sorry to bother you :-) Could you please help us on this issue? The problem Benjamin is encountering might be related to the patch you submitted months ago in order to make emacs compatible with latest Xfree as well as Xorg. There seems to be no problem with XEmacs which does not have your fix. I do not question the patch; maybe does Benjamin need to fix something on his side, but I'm unable to explain :-P Thanks in advance. Cheers, -- Jérôme Marant
Bug#294867: base: de4x5.ko generates endless loop of errors with phobos p430tx
Now I see that de4x5 used to be blacklisted by default by hotplug, but I removed last year when somebody told me that the driver was obsolete. Please let me know if you will finally kill it or I have to add it again to the default blacklist. As of 2.4.27-2, de4x5 appears to still be the most viable driver for my DECchip 21040 ethernet card on alpha (PCI ID 1011:0002). Let me know if you need me to test against the current tulip module. -- Steve Langasek postmodern programmer signature.asc Description: Digital signature
Bug#295653: netbase: please call nameif -s in /etc/init.d/networking
Package: netbase Version: 4.19 Severity: normal Please call nameif (-s) in /etc/init.d/networking if /etc/mactab is present, maybe right before the doopt calls in the start method. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295654: gimp: pictures cropped with Image Magick aren't loaded properly in GIMP.
Package: gimp Version: 2.2.3-2 Severity: normal Hi, I'm not sure it's a GIMP problem, it might be an ImageMagick problem, but as GIMP seems to be the only program which has problems with images generated by ImageMagick, I try it here first, feel free to reassign. So, to the problem, when I crop an image with 'display', it appears with an offset in GIMP (the layer is shifted relative to the image). I'd say that the offset is the same as the cropped portion of the original picture. It can go as far as that I get a warning from gimp saying that the PNG file specifies an offset that caused the layer to be positioned outside the image. If I edit the image, e.g. in kpaint, the problem disappears in GIMP. I attach an example of such an image. Thanks, Eric -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.4.27-8deb1 Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Versions of packages gimp depends on: ii aalib1 1.4p5-22ascii art library ii gimp-data2.2.3-2 Data files for The GIMP ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libasound2 1.0.8-1 ALSA library ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libexif100.6.9-4 The EXIF library allows you to par ii libexpat11.95.8-1XML parsing C library - runtime li ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgimp2.0 2.2.3-2 Libraries necessary to run the GIM ii libgimpprint14.2.7-5 The Gimp-Print printer driver libr ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libgtk2.0-0 2.4.14-2The GTK+ graphical user interface ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libjpeg626b-9The Independent JPEG Group's JPEG ii liblcms1 1.13-1 Color management library ii libmng1 1.0.8-1 Multiple-image Network Graphics li ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libtiff4 3.7.1-3 Tag Image File Format (TIFF) libra ii libwmf0.2-7 0.2.8-1.1 Windows metafile conversion librar ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxmu6 4.3.0.dfsg.1-10 X Window System miscellaneous util ii libxpm4 4.3.0.dfsg.1-10 X pixmap library ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii wget 1.9.1-8 retrieves files from the web ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information attachment: johan_accdom.png
Bug#295014: Still existent in PRECVS8-2
Hi, this is just an update to inform that this bug still prevents rhino to build without the workaround with kaffe PRECVS8-2. Regards, Wolfgang -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295563: dh_python depends on hardcoded name of the python-binary
Le mercredi 16 fvrier 2005 18:58 +0100, Daniel Baumann a crit : If the python-binary is not 'python' but i.e. 'python2.3' instead, dh_python fails with Python is not installed, aborting. (Probably forgot to Build-Depend on python.). Please make it dynamically so one can use for example python2.3-dev as the only python-dependency in build-depends. This is not possible. This is the only way we found to get the default python version on the system. -- .''`. Josselin Mouette/\./\ : :' : [EMAIL PROTECTED] `. `'[EMAIL PROTECTED] `- Debian GNU/Linux -- The power of freedom
Bug#295069: Verbose / debug options hard to find if present at all
On Sun, Feb 13, 2005 at 01:16:55PM +0100, Jeroen van Wolffelaar wrote: Package: apt Version: 0.5.27 Severity: minor I tried finding out why apt-get source doesn't work for me (bug report on its way), but couldn't, even after looking at like 4 apt manpages (apt, apt-get, apt.conf, apt_preferences), find any option/flag to ask apt-get to be more verbose at what's going on. An exhaustive list of config options would be nice too in some manpage, so one can search through it and find the options one needs. The manpage for apt.conf points to /usr/share/doc/apt/examples/configure-index.gz which gives you a list with all available configuration options. This includes the debug options. Cheers, Michael -- Linux is not The Answer. Yes is the answer. Linux is The Question. - Neo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295655: ntp-server: set the NTP server using debconf in /etc/ntp.conf
Package: ntp-server Version: 1:4.2.0a+stable-2 It would be nice to set the ntp server in /etc/ntp.conf using debconf. In universities, companies etc. people use one or more internal NTP sources, not pool.ntp.org. Using debconf would provide for a convenient way to set this information, esp. as it's the only configuration most people would have to do. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295656: wvdial: error message error: Says device is busy when real reason is permission denied
Package: wvdial Version: 1.54.0 If I don't have write access to the directory /var/lock I get: $wvdial -- WvDial: Internet dialer version 1.54.0 -- Cannot open /dev/ttyS2: Device or resource busy -- Cannot open /dev/ttyS2: Device or resource busy -- Cannot open /dev/ttyS2: Device or resource busy Shouldn't it be Cannot write in /var/lock: permission denied David Lawyer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295633: expect_5.42.1-1.2(i386/unstable): FTBFS: really build-depends autoconf2.13
tags 295633 unreproducible severity 295633 important thanks Hi LaMont, I'm not sure where this bug is coming from, but version 5.42.1-1.2 has successfully build from source on all architectures, continues to build correctly in i386 pbuilder for me, and is the explicit result of an NMU that *updated* the config.guess and config.sub files. Are you sure this bug applies to the current version? -- Steve Langasek postmodern programmer signature.asc Description: Digital signature
Bug#294500: NMU of ipython
I NMUed IPython (0.6.5-1.1) to fix this bug. Thanks for the patch. -Steven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295657: EXT3 on RAID problems in all 2.6-smp
Package: kernel-image-2.6.10-1-686-smp Version: 2.6.10-4 Severity: critical 2 months ago I bought 4 new hard drives, which I configured as follows: - | Linux | Swap | RAIDSET-1 disk 1 | - | RAIDSET-0 disk 1 | RAIDSET-1 disk 2 | - | RAIDSET-0 disk 2 | RAIDSET-1 disk 3 | - | RAIDSET-0 disk 3 | RAIDSET-1 disk 4 | - RAIDSET-0 is 20G, RAIDSET-1 is 709G. On top of both raid devices I use the device mapper to encrypt those disks, so data travels to the disk through the following layers: vfs - ext3 - device mapper - raid - physical disks Since the beginning I have been having problems with heavy disk usage on RAIDSET-1. It seems that under normal circumstances the system is stable, but under heavy load the following error occurs: Feb 12 06:27:25 einstein kernel: EXT3-fs error (device dm-2): ext3_readdir: bad entry in directory #84509561: rec_len %% 4 != 0 - offset=0, inode=1629516644, rec_len=29795, name_len=117 Feb 12 06:27:25 einstein kernel: Aborting journal on device dm-2. Feb 12 06:27:25 einstein kernel: ext3_abort called. Feb 12 06:27:25 einstein kernel: EXT3-fs abort (device dm-2): ext3_journal_start: Detected aborted journal Feb 12 06:27:25 einstein kernel: Remounting filesystem read-only As I do some spam-learning and backups at night, requiring some heavy disk use, this happens just about every day. Running fsck after the error is useless, as it finds no errors at all. So there is little else to do then remount and hope for the best for another day. My system is a dual Pentium II 400MHz with 384MB memory. All four disks are Hitachi/IBM Deskstar 250G. The problem occurs with every 2.6 kernel I have tried so far, starting from 2.6.7. Typical thing is that it only seems to occur on -smp kernels. I've been running some UP-kernels as well and (although slower) they do not thrash the ext3 journal. Could this be an SMP race? More system information can be found in the attached kern.log. Regards, Jeroen Feb 12 12:09:48 einstein kernel: klogd 1.4.1#16, log source = /proc/kmsg started. Feb 12 12:09:48 einstein kernel: Inspecting /boot/System.map-2.6.7-1-686-smp Feb 12 12:09:49 einstein kernel: Loaded 27102 symbols from /boot/System.map-2.6.7-1-686-smp. Feb 12 12:09:49 einstein kernel: Symbols match kernel version 2.6.7. Feb 12 12:09:49 einstein kernel: No module symbols loaded - kernel modules not enabled. Feb 12 12:09:49 einstein kernel: Linux version 2.6.7-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-2)) #1 SMP Thu Jul 8 06:08:37 EDT 2004 Feb 12 12:09:49 einstein kernel: BIOS-provided physical RAM map: Feb 12 12:09:49 einstein kernel: BIOS-e820: - 0009fc00 (usable) Feb 12 12:09:49 einstein kernel: BIOS-e820: 0009fc00 - 000a (reserved) Feb 12 12:09:49 einstein kernel: BIOS-e820: 000f - 0010 (reserved) Feb 12 12:09:49 einstein kernel: BIOS-e820: 0010 - 17ff (usable) Feb 12 12:09:49 einstein kernel: BIOS-e820: 17ff - 17ff8000 (ACPI data) Feb 12 12:09:49 einstein kernel: BIOS-e820: 17ff8000 - 1800 (ACPI NVS) Feb 12 12:09:49 einstein kernel: BIOS-e820: fec0 - fec01000 (reserved) Feb 12 12:09:49 einstein kernel: BIOS-e820: fee0 - fee01000 (reserved) Feb 12 12:09:49 einstein kernel: BIOS-e820: - 0001 (reserved) Feb 12 12:09:49 einstein kernel: 0MB HIGHMEM available. Feb 12 12:09:49 einstein kernel: 383MB LOWMEM available. Feb 12 12:09:49 einstein kernel: found SMP MP-table at 000fb4b0 Feb 12 12:09:49 einstein kernel: On node 0 totalpages: 98288 Feb 12 12:09:49 einstein kernel: DMA zone: 4096 pages, LIFO batch:1 Feb 12 12:09:49 einstein kernel: Normal zone: 94192 pages, LIFO batch:16 Feb 12 12:09:49 einstein kernel: HighMem zone: 0 pages, LIFO batch:1 Feb 12 12:09:49 einstein kernel: DMI 2.0 present. Feb 12 12:09:49 einstein kernel: ACPI: RSDP (v000 AMI ) @ 0x000faf40 Feb 12 12:09:49 einstein kernel: ACPI: RSDT (v001 AMIINT 0x0010 MSFT 0x0097) @ 0x17ff Feb 12 12:09:49 einstein kernel: ACPI: FADT (v001 AMIINT 0x0010 MSFT 0x0097) @ 0x17ff0030 Feb 12 12:09:49 einstein kernel: ACPI: MADT (v001 AMIINT DRAC-100 0x0009 MSFT 0x0097) @ 0x17ff00b0 Feb 12 12:09:49 einstein kernel: ACPI: DSDT (v001MSI AMIACPI 0x1000 MSFT 0x010a) @ 0x Feb 12 12:09:49 einstein kernel: ACPI: PM-Timer IO Port: 0x408 Feb 12 12:09:49 einstein kernel: ACPI: Local APIC address
Bug#295560: logcheck: Please include filename when reporting invalid regular expression
Jamie L. Penman-Smithson [EMAIL PROTECTED] wrote: If you run logcheck in debug mode you'll be able to find out which file the error is in. For example, I added this to ignore.d.server/logcheck: ^\w{3} [ :0-9]{11} [._[:alnum:]-]+ foobar\[[0-9]+\]: test (foo test$ Running logcheck -otd gives: [...] D: [1108580515] cleanchecked - dir - /tmp/logcheck.pFqP43/ignore/logcheck grep: Invalid regular expression [...] I think this is what you're looking for? No, not really. I know I can find the problematic file this way. But I would prefer to get an indication about this in the mail that cron sends. If an inexperienced user gets a mail with a subject from some crontab file and a body that only says grep: invalid regular expression, he will problably not know at once what this means (and I must say that I was not sure that it was an error in one of my logcheck filter files until I saw the debug output). What I suggest is that for each egrep over the filter files, you check whether the return value is 2, and if yes send a message to stderr: logcheck found an invalid regular expression in file $file (ideally with the temporary directory mapped back to the original location). Regards, Frank -- Frank Küster Inst. f. Biochemie der Univ. Zürich Debian Developer
Bug#295653: netbase: please call nameif -s in /etc/init.d/networking
reassign 295653 net-tools thanks On Feb 17, W. Borgert [EMAIL PROTECTED] wrote: Please call nameif (-s) in /etc/init.d/networking if /etc/mactab is present, maybe right before the doopt calls in the start method. Please ask the net-tools maintainer to provide his own script, /etc/init.d/networking is deprecated. -- ciao, Marco signature.asc Description: Digital signature
Bug#295658: asterisk 1.0.5-2 using chan_skinny die without this patch
Package: asterisk Version: 1.0.5-2 Severity: important Tags: patch http://bugs.digium.com/bug_view_page.php?bug_id=0003496 -- Johan Thelmén
Bug#295660: gnome-icon-theme-gartoon: Please use gtk-update-icon-cache
Package: gnome-icon-theme-gartoon Severity: wishlist Please use this postinst : #! /bin/sh set -e #DEBHELPER# if [ -x /usr/bin/gtk-update-icon-cache ]; then gtk-update-icon-cache /usr/share/icons/gartoon fi and this prerm : #! /bin/sh set -e #DEBHELPER# rm -f /usr/share/icons/gartoon/icon-theme.cache Using gtk-update-icon-cache brings a serious performance boost for application loading icons. Thanks, -- Josselin Mouette -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295659: kdevelop3: svn commands fail
Package: kdevelop3 Version: 4:3.1.1-2 Severity: important issuing any svn command (e.g. from the context menu in the editor window over an file under svn control) leads to the popup of an error message 'Prozess Aufruf des Ein/Ausgabe-Modulls nicht möglich. klauncher meldet: Unbekanntes Protokoll svn+http. lässt sich nicht starten.' which translates roughly to 'process call of I/O-modules not possible. klauncher says: unknown protocol svn+http. cannot be started' -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages kdevelop3 depends on: ii autoconf 2.59a-3 automatic configure script builder ii automake1.4 [automaken] 1:1.4-p6-8 A tool for generating GNU Standard ii automake1.6 [automaken] 1.6.3-11A tool for generating GNU Standard ii automake1.8 [automaken] 1.8.5-2 A tool for generating GNU Standard ii automake1.9 [automaken] 1.9.4-1 A tool for generating GNU Standard ii kdebase-bin 4:3.3.2-1 KDE Base (binaries) ii kdelibs4 4:3.3.2-1 KDE core libraries ii kdevelop3-data 4:3.1.1-2 An IDE for Unix/X11 - data ii kdevelop3-plugins4:3.1.1-2 An IDE for Unix/X11 - development ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfam0c102 2.7.0-6 client library to control the FAM ii libgcc1 1:3.4.3-6 GCC support library ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libidn11 0.5.2-3 GNU libidn library, implementation ii libjpeg626b-9The Independent JPEG Group's JPEG ii libpcre3 4.5-1.1 Perl 5 Compatible Regular Expressi ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libqt3c102-mt3:3.3.3-8 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxrender1 0.8.3-7 X Rendering Extension client libra ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- debconf information: kdevelop3/use_global_index: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295661: kdevelop3: relaunching debugger fails after segfault of debugged c++-program
Package: kdevelop3 Version: 4:3.1.1-2 Severity: important I debug code (written in c++) using the built in debugger of kdevelop. If my code segfaults (this can't be always avoided ;-) the debugger does not work anymore. Relaunching of the program in debug mode haws no effect and I have to restart kdevelop. This means restarting kdevelop several dozens of times a day. This becomes extremely nasty as kdevelop doen't honor most of the personalizations I made. I.e. after the relaunch of kdevelop I have always to adjust window sizes, delete unwanted views, toggle the standard marker from bookmark to breakpoint, and so on. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages kdevelop3 depends on: ii autoconf 2.59a-3 automatic configure script builder ii automake1.4 [automaken] 1:1.4-p6-8 A tool for generating GNU Standard ii automake1.6 [automaken] 1.6.3-11A tool for generating GNU Standard ii automake1.8 [automaken] 1.8.5-2 A tool for generating GNU Standard ii automake1.9 [automaken] 1.9.4-1 A tool for generating GNU Standard ii kdebase-bin 4:3.3.2-1 KDE Base (binaries) ii kdelibs4 4:3.3.2-1 KDE core libraries ii kdevelop3-data 4:3.1.1-2 An IDE for Unix/X11 - data ii kdevelop3-plugins4:3.1.1-2 An IDE for Unix/X11 - development ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfam0c102 2.7.0-6 client library to control the FAM ii libgcc1 1:3.4.3-6 GCC support library ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libidn11 0.5.2-3 GNU libidn library, implementation ii libjpeg626b-9The Independent JPEG Group's JPEG ii libpcre3 4.5-1.1 Perl 5 Compatible Regular Expressi ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libqt3c102-mt3:3.3.3-8 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxrender1 0.8.3-7 X Rendering Extension client libra ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- debconf information: kdevelop3/use_global_index: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295412: initrd-tools: Fails to ignore 32bit emulation layer on ldd calls
Harald Dunkel wrote: Assuming that valid shared library paths start with '/' I would suggest to apply this patch to mkinitrd: Hmm, maybe not if LD_LIBRARY_PATH is being used. Beware. -- Joshua Kwan signature.asc Description: OpenPGP digital signature
Bug#294931: new upstream version 2.2.9 available
On Sat, Feb 12, 2005 at 05:39:28AM -0800, Max Alekseyev wrote: There is a new version 2.2.9 availble at the official website http://pari.math.u-bordeaux.fr/download.html Although it called Development version, it's the only precompiled version currently offered to windows users, and so it should be well suitable for Debian testing/unstable as well. Current stable version 2.1.6 is quite outdated and misses many features. Hello Max, I am well aware of the development version 2.2.9 and the new feature it offers given I have contributed to a large number of them. The precompiled version for Windows is based on the development version because the stable will not build under cygwin. However, I don't feel that 2.2.9 is suitable for Debian: this version has several nasty bugs. For example: ? isprime(798125329,2) %1 = 0 (should be 1 since 798125329 is prime). Also, being a development snapshot, both the API and the ABI will change in the next release, which does not make it suitable for use as a shared library. Given that, I am not keen to push that version to the next Debian stable release (due soon), which will be the case if I upload it to unstable now. However, at some point, I might consider to package separatly the CVS version as a snapshot. Cheers, -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#279722: libc6: application sometimes crashes, valgrind shows error in gconv_db.c
On Thu, Feb 03, 2005 at 05:36:44PM +0100, Loïc Minier wrote: Hi, This is a followup for Debian bug http://bugs.debian.org/279722. I already tried in the past to build glibc on my system, and this was too long a task for my laptop, could someone try swapping the free after the __gconv_close_transform() or hand me a build if he can't reproduce the bug? Well I tried the following patch, but that did not fix the bug. (Though I have to use ls --help for reproducing the bug). Thanks for investigating this irritating issue! -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. --- build-tree/glibc-2.3.2/iconv/gconv_close.c.old 2005-02-15 13:24:35.0 +0100 +++ build-tree/glibc-2.3.2/iconv/gconv_close.c 2005-02-15 14:33:08.0 +0100 @@ -30,6 +30,7 @@ struct __gconv_step *srunp; struct __gconv_step_data *drunp; size_t nsteps; + int ret; /* Free all resources by calling destructor functions and release the implementations. */ @@ -57,9 +58,10 @@ } while (!((drunp++)-__flags __GCONV_IS_LAST)); + /* Close the participating modules. */ + ret = __gconv_close_transform (srunp, nsteps); + /* Free the data allocated for the descriptor. */ free (cd); - - /* Close the participating modules. */ - return __gconv_close_transform (srunp, nsteps); + return ret; } -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295666: regex.7.gz: The [[::]] and [[::]] word boundary regexps are not supported
Package: manpages Version: 2.01-1 Severity: minor File: regex.7.gz Hello ! The regex.7.gz mentions that [[::]] and [[::]] are available to designate word boundaries. However, neither grep nor sed, which are build on the standard libc regcomp do recognise this syntax. Moreover, the small program here #include regex.h #include sys/types.h #include iostream using namespace std; int main() { regex_t RE; int err_code = regcomp(RE, [[::]], REG_EXTENDED); char Buffer[100]; if(err_code) { regerror(err_code, RE, Buffer, 100); cerr Error : Buffer endl; } } produces the following error message: Error : Invalid character class name My guess is that this feature is not implemented anymore, or has never been. Then, two solutions: either remove it from the documentation, or at least mention that it's not supported anymore - either put the feature back into libc ;-) ! Thanks for considering this report Vincent Fourmond -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.7 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295662: mozilla-thunderbird: segmentation-fault when closing message window
Package: mozilla-thunderbird Version: 1.0-3 Severity: normal This error appears when I open the message-window of a RSS-Message in News Blogs. I load the web page, not the article summary. When I open the message-window and then close it immediately again, before the HTML-Body of the RSS-Feed-Message is loaded, Thunderbird segfaults. When I wait until the HTML is loaded, there is no problem. Error-Message; /usr/lib/mozilla-thunderbird/run-mozilla.sh: line 451: 10266 Segmentation fault $prog ${1+$@} -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (1000, 'testing'), (50, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=C, [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages mozilla-thunderbird depends on: ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libgtk2.0-0 2.4.14-2The GTK+ graphical user interface ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft2 2.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender1 0.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- debconf information: * mozilla-thunderbird/browser: Debian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295664: console-data: [INTL:gl] Galician debconf templates translation
Package: console-data Version: 2002.12.04dbs-48 Severity: wishlist Tags: patch l10n Should be attached to this bug report. :-) -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.4.18-grsec-1.9.4 Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages console-data depends on: ii console-common0.7.48 Basic infrastructure for text cons ii debconf 1.4.41 Debian configuration management sy -- debconf information excluded # Galician translation of the console-data debconf templates # Jacobo Tarro [EMAIL PROTECTED], 2005 # #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid msgstr Project-Id-Version: console-data\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2004-11-26 19:36+\n PO-Revision-Date: 2005-02-17 11:20+0100\n Last-Translator: Jacobo Tarro [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid by msgstr Bielorruso #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid bg msgstr Blgaro #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid croat msgstr Croata #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid cz-lat2 msgstr Checo #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid sg-latin1 msgstr Alemn (Suza) #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid de-latin1-nodeadkeys msgstr Alemn #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid dk-latin1 msgstr Dinamarqus #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid us msgstr Americano #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid uk msgstr Britnico #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid dvorak msgstr Dvorak #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid et msgstr Estoniano #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid la-latin1 msgstr Latinoamericano #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid es msgstr Espaol #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid fi-latin1 msgstr Fins #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid fr-latin9 msgstr Francs #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 msgid fr-latin1 msgstr Francs (antigo) #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid be2-latin1 msgstr Belga #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid cf msgstr Francs (Canad) #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid fr_CH-latin1 msgstr Francs (Suza) #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid gr msgstr Grego #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid hebrew msgstr Hebreu #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid hu msgstr Hngaro #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid is-latin1 msgstr Islands #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid it msgstr Italiano #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid lt msgstr Lituano #. Type: select #. Choices #: ../console-keymaps-acorn.templates:3 ../console-keymaps-at.templates:3 msgid lv-latin4 msgstr Letn #. Type: select #. Choices #:
Bug#295665: [INTL:nl] new Dutch po-debconf translation
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: ipvsadm Version: 1.24-1 Severity: wishlist Tags: patch l10n Please find attached the Dutch po-debconf translation. This translation has been vetted by the review process of the debian-l10n-dutch team. Please add it to your next package revision, it should be inserted in your package build-tree as debian/po/nl.po, TIA. Feel free to mail me if this file needs updating at some future date (by using podebconf-reportpo for example). Cheers Luk -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) iD8DBQFCFHC+5UTeB5t8Mo0RAnvMAJ9ycshtgC3Npdio+Q961ev3pb5GvwCePnUR PBqFWmJMbEI94KKGIw1s5a8= =i6ou -END PGP SIGNATURE- ipvsadm_1.24-1_nl.po Description: application/gettext
Bug#295548: Merging bugs
tags 295548 woody severity 295548 serious merge 295548 295575 thanks On Wed, Feb 16, 2005 at 09:45:26PM -0300, Margarita Manterola wrote: Severity 295575 serious Severity 295248 serious ^^ typo. merge 295248 295575 thanks These bugs are the same, and it seems that indeed there was a mistake when making the package. I hope it can be fixed soon. Security team, Joey, It seems the most recent evolution security update had a regression w.r.t. SSL support, not unlikely caused by missing build dep in woody or such. I think it would desireable to rectify this issue in an update. --Jeroen -- Jeroen van Wolffelaar [EMAIL PROTECTED] http://jeroen.A-Eskwadraat.nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295667: /usr/lib/mozilla-firefox/firefox: css focus problem with select forms
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal File: /usr/lib/mozilla-firefox/firefox FF fails to handle select forms correctly. See the bug example at http://www.domains-und-mehr.de/dateien/test.html For some select forms, you have to click twice to open them for the first time. This is a really nasty bug because you never know if you have to click once or twice this time! -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.9tooar1 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages mozilla-firefox depends on: ii debianutils 2.8.4 Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libgtk2.0-0 2.6.2-3 The GTK+ graphical user interface ii libidl0 0.8.3-1 library for parsing CORBA IDL file ii libjpeg626b-9The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft2 2.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender1 0.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1 Utilities that use the proc filesy ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#241096: REPRESENTATIVE NEEDED
Dear Sir/Madam, I am Mr.Leu cheng,we are a group of business men who deal on import and export raw materials into the canada,america and europe.We aresearching for representatives who can help us establish a medium of getting to our costumers in the canada, america and europe as well as making payments through you to us.Please if you are interested in transacting business with us we will be very glad. Please contact us for more information. Subject to your satisfaction you will be given the opportunity to negotiate your mode of which we will pay foryour services as our representative in canada,america and europe. Regards. Vice President Mr.Leu cheng ___ Mail sent from WebMail service at PHP-Nuke Powered Site - http://nouvellesolutions.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295248: tex4ht -- LaTeX and TeX for Hypertext (HTML)
Hello All, Regarding the Debian package of the latest version of tex4ht. You can find a package of the latest version at: http://www.imsc.res.in/~kapil/debian/tex4ht/ The version is tex4ht_1.0.20050216.2023*. Thanks and best regards, Kapil. -- http://www.imsc.res.in/~kapil/gpg.html for my Public Key. -- 1024D/5416E5B8 2004-10-13 Kapil Hari Paranjape [EMAIL PROTECTED] 1024g/3BDF565B 2004-10-13 Key fingerprint = F160 CBB9 03C8 425D 4BBA 79F4 491F 8FDA 5416 E5B8 -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295668: quodlibet: refresh/reload library gives traceback
Package: quodlibet Version: 0.8.1-1 Severity: normal Hi, hitting refresh or reload library gives a traceback in rebuild() method: Traceback (most recent call last): File /usr/bin/quodlibet, line 1229, in rebuild if c + r != 0: UnboundLocalError: local variable 'c' referenced before assignment Traceback (most recent call last): File /usr/bin/quodlibet, line 1235, in rebuild_hard self.rebuild(activator, True) File /usr/bin/quodlibet, line 1229, in rebuild if c + r != 0: UnboundLocalError: local variable 'c' referenced before assignment Regards, Bastian -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-treasure5 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages quodlibet depends on: ii python2.3.5-1An interactive high-level object-o ii python-glade2 2.4.1-2GTK+ bindings: Glade support ii python-id3lib 0.5.1-3id3lib wrapper for Python - dummy ii python-pymad 0.5.2-1Python wrapper to the MPEG Audio D ii python-pyvorbis 1.3-1 A Python interface to the Ogg Vorb ii quodlibet-ext 0.8.1-1extensions for the Quod Libet audi -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295669: override disparities found in suite unstable
Package: xwhois Severity: wishlist Version: 0.4.2-7 Problems # There were override disparities found in suite unstable: * xwhois: Override says net - optional, .deb says None - None ({partial}) Anibal Monsalve Salazar -- .''`. Debian GNU/Linux : :' : Free Operating System `. `' http://debian.org/ `- http://v7w.com/anibal signature.asc Description: Digital signature
Bug#295670: FTBFS: X11/Xlib.h: No such file or directory
Package: php-imlib Version: 0.4-1 Severity: normal Automatic build of php-imlib_0.4-1 on aahz by sbuild/m68k 1.170.5 [...] ** Using build dependencies supplied by package: Build-Depends: debhelper ( 3.0.0), php4-dev, libimlib2-dev [...] /usr/bin/make make[1]: Entering directory `/build/buildd/php-imlib-0.4' /bin/sh /build/buildd/php-imlib-0.4/libtool --mode=compile m68k-linux-gcc -I. -I/build/buildd/php-imlib-0.4 -DPHP_ATOM_INC -I/build/buildd/php-imlib-0.4/include -I/build/buildd/php-imlib-0.4/main -I/build/buildd/php-imlib-0.4 -I/usr/include/php4 -I/usr/include/php4/main -I/usr/include/php4/Zend -I/usr/include/php4/TSRM -DHAVE_CONFIG_H -g -O2 -c /build/buildd/php-imlib-0.4/imlib.c -o imlib.lo mkdir .libs m68k-linux-gcc -I. -I/build/buildd/php-imlib-0.4 -DPHP_ATOM_INC -I/build/buildd/php-imlib-0.4/include -I/build/buildd/php-imlib-0.4/main -I/build/buildd/php-imlib-0.4 -I/usr/include/php4 -I/usr/include/php4/main -I/usr/include/php4/Zend -I/usr/include/php4/TSRM -DHAVE_CONFIG_H -g -O2 -c /build/buildd/php-imlib-0.4/imlib.c -fPIC -DPIC -o .libs/imlib.o In file included from /build/buildd/php-imlib-0.4/imlib.c:39: /build/buildd/php-imlib-0.4/php_imlib.h:39:22: X11/Xlib.h: No such file or directory In file included from /build/buildd/php-imlib-0.4/php_imlib.h:40, from /build/buildd/php-imlib-0.4/imlib.c:39: /usr/include/Imlib2.h:107: error: syntax error before '*' token /usr/include/Imlib2.h:108: error: syntax error before '*' token /usr/include/Imlib2.h:109: error: syntax error before colormap /usr/include/Imlib2.h:110: error: syntax error before drawable /usr/include/Imlib2.h:111: error: syntax error before mask /usr/include/Imlib2.h:136: error: syntax error before '*' token /usr/include/Imlib2.h:137: error: syntax error before '*' token /usr/include/Imlib2.h:138: error: syntax error before imlib_context_get_colormap /usr/include/Imlib2.h:139: error: syntax error before imlib_context_get_drawable /usr/include/Imlib2.h:140: error: syntax error before imlib_context_get_mask /usr/include/Imlib2.h:169: error: syntax error before '*' token /usr/include/Imlib2.h:170: error: syntax error before '*' token /usr/include/Imlib2.h:170: error: syntax error before '*' token /usr/include/Imlib2.h:208: error: syntax error before '*' token /usr/include/Imlib2.h:210: error: syntax error before '*' token /usr/include/Imlib2.h:213: error: syntax error before pixmap /usr/include/Imlib2.h:239: error: syntax error before mask /usr/include/Imlib2.h:242: error: syntax error before '*' token /usr/include/Imlib2.h:245: error: syntax error before mask /usr/include/Imlib2.h:255: error: syntax error before mask make[1]: *** [imlib.lo] Error 1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293073: Update - problem fixes self when cron job runs
The daily cronjob seems to generate the required file, but the file should also be being generated when the package is installed. Not on my freshly installed system. Starting the cronjob by hand gives the following result: afrika:~# /etc/cron.daily/aide grep: /var/lib/aide/aide.conf.autogenerated: No such file or directory - Rolf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294247: libapache-mod-auth-pam: PAM authentification doesn't work after upgrading
tags 294247 + unreproducible stop Am Dienstag, 8. Februar 2005 19:46 schrieb Guillaume Morin: After upgrading libapache-mod-auth-pam, my pam authentification through apache doesn't work anymore. I tried the configuration you showed but the authentication worked. On this host, PAM goes through an external LDAP database, FWIW. The only change in the package was that the default /etc/pam.d/httpd now looks like this: #%PAM-1.0 @include common-auth @include common-account whereas it formerly looked like this: #%PAM-1.0 auth required /lib/security/pam_unix.so accountrequired /lib/security/pam_unix.so Perhaps if you change it back it will work for you. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#286415: more complete /etc/modprobe.d/zaptel
Package: zaptel Followup-For: Bug #286415 This is a more complete /etc/modprobe.d/zaptel that includes all of the zaptel modules instead of only the ones listed in /etc/modutils/zaptel. Have a nice day, wt # Adapted from the /etc/modutils/zaptel # by Warren Turkal [EMAIL PROTECTED] # Thu Feb 17 19:02:38 UTC 2005 #I don't know if the part between the *** and *** is needed #*** # Uncomment the appropriate alias line, and change 'torisa' to the # driver for your card # DevFS #alias /dev/zap torisa # Non-DevFS #alias char-major-196 torisa #options torisa base=0xd #*** #real devices install wcfxs /sbin/modprobe --ignore-install wcfxs /usr/sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb /usr/sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa /usr/sbin/ztcfg install tor2/sbin/modprobe --ignore-install tor2 /usr/sbin/ztcfg install wcfxo /sbin/modprobe --ignore-install wcfxo /usr/sbin/ztcfg install wct1xxp /sbin/modprobe --ignore-install wct1xxp /usr/sbin/ztcfg install wct4xxp /sbin/modprobe --ignore-install wct4xxp /usr/sbin/ztcfg install wcte11xp/sbin/modprobe --ignore-install wcte11xp /usr/sbin/ztcfg #virtual devices install ztd-eth /sbin/modprobe --ignore-install ztd-eth /usr/sbin/ztcfg install ztdummy /sbin/modprobe --ignore-install ztdummy /usr/sbin/ztcfg install ztdynamic /sbin/modprobe --ignore-install ztdynamic /usr/sbin/ztcfg -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#279722: libc6: application sometimes crashes, valgrind shows error in gconv_db.c
Hi, On Thu, Feb 17, 2005, Bill Allombert wrote: Well I tried the following patch, but that did not fix the bug. (Though I have to use ls --help for reproducing the bug). Sadly, I'm out of ideas here, clearly some data is freed and used again afterwards (to clean allocated data in a substructure mostly), but that probably happens at a higher level, and I'm kind of lost in higher level functions. :-/ Thanks for trying swapping the free (I really can't build glibc on my laptop)! -- Loïc Minier [EMAIL PROTECTED] Neutral President: I have no strong feelings one way or the other.
Bug#295581: wireless-tools: if-pre-up script should load keys from file
tags 295581 + wontfix thanks On Wed, Feb 16, 2005 at 09:37:01PM +0100, Hadmut Danisch wrote: the if-pre-up script is great, but for setting WEP keys it requires them to be included in the interfaces file. Would be better to allow a wireless_* command which loads them from an external file. That file could be kept more secret or dynamically generated. If you want to do this kind of stuff, I suggest you add a pre-up command to /etc/network/interfaces, like this: iface eth0 inet dhcp pre-up iwconfig $IFACE key `cat keyfile` I will not add functionality in the if-pre-up script that does not already exist in iwconfig itself. -- Met vriendelijke groet / with kind regards, Guus Sliepen [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#295673: mozilla-firefox: Content frame jumps up and down by one pixel if you make the FF window small enough
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal If you make the FF window small enough, the content frame will start to continiously jump up and down by one pixel. You can see a small line (1 px height) appear between the top of the status bar and the bottom of the horizontal scrollbar of the content frame and it continously blinks! (appears and disappears, maybe 10 times a sec). This happens for lots of sites if you make the FF window small enough, eg. see http://www.plone.org and reduce the size of the FF window to about 400x400 pixel. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.9tooar1 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages mozilla-firefox depends on: ii debianutils 2.8.4 Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libgtk2.0-0 2.6.2-3 The GTK+ graphical user interface ii libidl0 0.8.3-1 library for parsing CORBA IDL file ii libjpeg626b-9The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft2 2.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender1 0.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1 Utilities that use the proc filesy ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295672: /etc/init.d/camsmtp doesn't use /etc/default/clamsmtp
Package: clamsmtp Version: 1.2-3 Severity: minor NAME in /etc/init.d/camsmtp is changed from clamsmtp to clamsmtpd. In the script /etc/init.d/clamsmtp I find the following: 1° Testing /etc/default/${NAME} and if exists launching /etc/dafults/${name}. The directory /etc/defaults doesn't exist 2° In the same test : $NAME is now clamsmtpd but the package comes with /etc/default/clamsmtp Thus /etc/default/clamsmtpd is never finded. Solution: Changing in the script /etc/init.d/clamsmtp the test, for using /etc/default/clamsmtp. Package: clamsmtp Status: install ok installed Priority: optional Section: mail Installed-Size: 128 Maintainer: Chad Walstrom [EMAIL PROTECTED] Architecture: i386 Version: 1.2-3 Depends: clamav-daemon (= 0.75.1), libc6 (= 2.3.2.ds1-4), debconf (= 0.5) | debconf-2.0 Recommends: postfix | mail-transport-agent Conffiles: /etc/default/clamsmtp 7d34189fafcb501ac410b0273cf16fc9 /etc/clamsmtpd.conf 26f53075bf8d2fcf49323bfe060586bc /etc/init.d/clamsmtp a0406ea005e0e697ba1d4a0a4864ec50 Description: virus-scanning SMTP proxy 2.6.8-1-686-smp #1 SMP Thu Nov 25 04:55:00 UTC 2004 i686 GNU/Linux
Bug#295671: mozilla-firefox: tableless design will mess up if you make the FF window too small
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal If you make the FF window smaller beyond a certain point, the layout of tableless sites will be destroyed. For an example, see http://www.plone.org and redurce the FF window width to =640 and the header row will be a mess. This happens more or less with all sites that are based on tableless layout if you make the FF window small enough. Though, it shouldn't do that but instead show horizontal scrollbars that are wide enough to scroll the whole site. -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.9tooar1 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages mozilla-firefox depends on: ii debianutils 2.8.4 Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libgtk2.0-0 2.6.2-3 The GTK+ graphical user interface ii libidl0 0.8.3-1 library for parsing CORBA IDL file ii libjpeg626b-9The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libstdc++5 1:3.3.5-8 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft2 2.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender1 0.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1 Utilities that use the proc filesy ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295581: wireless-tools: if-pre-up script should load keys from file
On Thu, Feb 17, 2005 at 12:07:46PM +0100, Guus Sliepen wrote: If you want to do this kind of stuff, I suggest you add a pre-up command to /etc/network/interfaces, like this: iface eth0 inet dhcp pre-up iwconfig $IFACE key `cat keyfile` I will not add functionality in the if-pre-up script that does not already exist in iwconfig itself. Sure this is possible. But it doesn't execute the commands in the correct order. Some wlan drivers don't accept the commands in arbitrary order. If you do it the way you describe, then the command is executed before or after your if-up script, and that fails with some card drivers. regards Hadmut -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295548: Merging bugs
Jeroen van Wolffelaar wrote: These bugs are the same, and it seems that indeed there was a mistake when making the package. I hope it can be fixed soon. Security team, Joey, It seems the most recent evolution security update had a regression w.r.t. SSL support, not unlikely caused by missing build dep in woody or such. I think it would desireable to rectify this issue in an update. Please fix the problem and discuss the correction with us. As already offered to Magarita I can provide the build logs to you as well. Oh, and I'm still interested to learn how evolution was able to access IMAPS when neither it nor libcamel0 depended on libssl* or libtls* Regards, Joey -- GNU does not eliminate all the world's problems, only some of them. -- The GNU Manifesto Please always Cc to me when replying to me on the lists. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#290857: patch
The svn.clkao.org server seems to be a bittle unstable. I am attaching the patch. Rafael Index: mm/filemap.c === --- mm/filemap.c (revision 21992) +++ mm/filemap.c (revision 21993) @@ -722,7 +722,10 @@ offset = *ppos ~PAGE_CACHE_MASK; isize = i_size_read(inode); - end_index = isize PAGE_CACHE_SHIFT; + if (!isize) + goto out; + + end_index = (isize - 1) PAGE_CACHE_SHIFT; if (index end_index) goto out; @@ -730,6 +733,16 @@ struct page *page; unsigned long nr, ret; + /* nr is the maximum number of bytes to copy from this page */ + nr = PAGE_CACHE_SIZE; + if (index == end_index) { + nr = ((isize - 1) ~PAGE_CACHE_MASK) + 1; + if (nr = offset) { +goto out; + } + } + nr = nr - offset; + cond_resched(); page_cache_readahead(mapping, ra, filp, index); @@ -742,16 +755,6 @@ if (!PageUptodate(page)) goto page_not_up_to_date; page_ok: - /* nr is the maximum number of bytes to copy from this page */ - nr = PAGE_CACHE_SIZE; - if (index == end_index) { - nr = isize ~PAGE_CACHE_MASK; - if (nr = offset) { -page_cache_release(page); -goto out; - } - } - nr = nr - offset; /* If users can be writing to this page using arbitrary * virtual addresses, take care about potential aliasing @@ -827,11 +830,22 @@ * another truncate extends the file - this is desired though). */ isize = i_size_read(inode); - end_index = isize PAGE_CACHE_SHIFT; - if (index end_index) { + end_index = (isize - 1) PAGE_CACHE_SHIFT; + if (unlikely(!isize || index end_index)) { page_cache_release(page); goto out; } + + /* nr is the maximum number of bytes to copy from this page */ + nr = PAGE_CACHE_SIZE; + if (index == end_index) { + nr = ((isize - 1) ~PAGE_CACHE_MASK) + 1; + if (nr = offset) { +page_cache_release(page); +goto out; + } + } + nr = nr - offset; goto page_ok; readpage_error:
Bug#149425: should compress data before sending
Hi @all! How about this bug? Was there any work done on it? It's open for more than 2 years now and seems not really hard to fix. Bill Allombert [EMAIL PROTECTED]: This is not a bug in the package but on the popcon server side, that we cannot fix. We are in the process of reorganizing popcon to be able to improve the server side. What about this process of reorganizing and the status of the needed possibility of compressed reports? My report is about 73k per machine and I own only a low bandwitdh modem connection, so a comression would be great. Kindly regards, Erik -- www.ErikSchanze.de * Bitte keine HTML-E-Mails! No HTML mails, please! Limit: 100 kB * * Linux-Info-Tag in Dresden, am 29. Oktober 2005 * Info: http://www.linux-info-tag.de * -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294696: Excessively strict dependancy for libjpeg62-dev
On Tue, Feb 15, 2005 at 02:38:34PM -0700, Joel Aelwyn wrote: On Tue, Feb 15, 2005 at 11:51:45AM +0100, Bill Allombert wrote: On Thu, Feb 10, 2005 at 11:29:43PM -0700, Joel Aelwyn wrote: The libjpeg62-dev package currently Depends on 'libc6-dev'. In most cases (including, as far as I can tell, this one), this is an excessively strict Dependancy; the value 'libc6-dev | libc-dev' should suffice (note that you can't simply do 'libc-dev', due to limitations of the packaging system, currently). Hello Joel, libc6-dev is the only package that provide libc-dev, so it is not strict, let alone excessively strict. I suspect you are referring to non-glibc ports. In that case, 'libc6-dev | libc-dev' is not correct because on a non glibc port, libc6-dev will not exist and libc-dev might be a purely virtual dependency. I propose you restate the problem you really have, and we try to address it correctly. So to summary: several plateform does not have a libc6-dev package, but have a libc*-dev that Provides libc6-dev. You would prefer if it was only necessary to Provides libc-dev instead, which make a lot of sense. However, I don't see what 'libc6-dev | libc-dev' achieve over 'libc-dev': on ia64 and alpha (which are autobuild), 'libc6-dev' is a purely virtual dependency, and so is 'libc6-dev | libc-dev' and 'libc-dev'. So why not change the dependency to libc-dev ? libc12-dev properly Provides: libc-dev. Please look at the virtual package list declaration for what libc-dev implies; that 'standard C library headers' are present. Except there is no libc12-dev on packages.debian.org. Among other things, even on glibc-based systems, it isn't only libc6-dev; it's also libc6.1-dev, libc0.2-dev, and libc1-dev. Most of those ports have ugly hacks such as Provides: libc6-dev to work around packages that don't properly declare what their build dependancies are, which is why bugs like this one have gone so long. Please note it is not here listed as a build dependency, but as as dependency of libjpeg6b-dev. libc6-dev is build-essential so is never installed due to Build-Depends, but through the build-essential package. This dependency is for the benefit of people that want to build software linked to libjpeg. The only reason the correct answer isn't just 'libc-dev' is due to package tools not being able to cope with not having at least one real alternative; it is a broken situation in APT/dpkg, with the workaround of 'always specify at least one real package that satifies the dependancy'. I well know that, but 'libc6-dev | libc-dev' does not achieve that on alpha and ia64. If we really want to achieve that, the simplest way is to have Depends: field that depends on the architecture and list the real Adding a Provides: libc6-dev to libc12-dev (as the other ports do if they have a different glibc version) would, for obvious reasons, not be a correct solution either, because then there is no way at all to say No, I mean it, this really needs GNU libc development files. That is a different problem: on what libc*-dev a -dev package should depends ? Obviously one that allows to build programs using the library, so probably the same as used for building the library. Also using the number 6 to mean 'GNU libc' and the number 12 'BSD libc' is not specially descriptive. Cheers, -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295674: Patch to debug FTBFS more easily in gtk-doc-scanobj
Package: gtk-doc-tools Version: 1.3-1.1~lool Severity: wishlist Tags: patch Hi, libbonobo FTBFS on ia64, see http://buildd.debian.org/fetch.php?pkg=libbonobover=2.8.1-1arch=ia64stamp=1108514028file=logas=raw I can't debug it further because gtk-doc-scanobj doesn't print the command line of the libbonobo-scan binary it calls (this fails). The attached pacth will wrap the call in sh -c -x which will permit to see errors such as segfaults and the exact command being run. This is upstream http://bugzilla.gnome.org/show_bug.cgi?id=167688. Regards, -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages gtk-doc-tools depends on: ii docbook-dsssl 1.79-2 modular DocBook DSSSL stylesheets, ii docbook-to-man1:2.0.0-17 converter from DocBook SGML into r ii docbook-xml 4.3-1.1standard XML documentation system, ii docbook-xsl 1.66.1-1 stylesheets for processing DocBook ii gnome-common 2.8.0-3common scripts and macros to devel ii jade 1.2.1-43 James Clark's DSSSL Engine ii perl 5.8.4-6Larry Wall's Practical Extraction ii xsltproc 1.1.12-5 XSLT command line processor -- no debconf information -- Loïc Minier [EMAIL PROTECTED] Neutral President: I have no strong feelings one way or the other. diff -urN gtk-doc-1.3.orig/gtkdoc-scanobj.in gtk-doc-1.3/gtkdoc-scanobj.in --- gtk-doc-1.3.orig/gtkdoc-scanobj.in 2004-10-14 17:50:50.0 +0200 +++ gtk-doc-1.3/gtkdoc-scanobj.in 2005-02-17 10:59:06.070448414 +0100 @@ -810,11 +810,11 @@ $o_file = $MODULE-scan.o } -$command = $CC $CFLAGS -c -o $o_file $MODULE-scan.c $LD -o $MODULE-scan $o_file $LDFLAGS; +$command = sh -c -x $CC $CFLAGS -c -o $o_file $MODULE-scan.c $LD -o $MODULE-scan $o_file $LDFLAGS; system($command) == 0 or die Compilation of scanner failed\n; -system(./$MODULE-scan) == 0 or die Scan failed\n; +system(sh -c -x ./$MODULE-scan) == 0 or die Scan failed\n; unlink ./$MODULE-scan.c, ./$MODULE-scan.o, ./$MODULE-scan.lo, ./$MODULE-scan;
Bug#295594: nautilus: With two CD-ROM drives, order is not clear
On Wed, Feb 16, 2005 at 10:40:46PM +0100, Michael Piefel wrote: In my /ets/fstab, I have: /dev/hda/cdrom iso9660 async,user,noauto,ro,utf8 /dev/hdc/cdrom iso9660 async,user,noauto,ro,utf8 I???m quite certain I won???t need two CDs at a time, so it doesn???t matter to me that it is the same directory. Nautilus shows two entries: CD-ROM (cool, it figured out itself) and CD-ROM (2). Unfortunately, it chose CD-ROM (2) for /dev/hda, my primary drive. This will cause a lot of trouble for you.. With the next gnome-vfs2 upload nautilus will mount based on mountpoints again (because that's more sane and pmount supports it now).. So with your setup you'll always have one of your two devices mounted, no matter which icon you choose. Anyway doing things this way is plain silly (no offence) and is almost impossible to fix (we would need some crazy heuristic to guess how to mount something).. Sjoerd PS: seb, 288174 is definitely a different ``bug'' -- The most costly of all follies is to believe passionately in the palpably not true. It is the chief occupation of mankind. -- H.L. Mencken -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294641: Mail delivery failed: returning message to sender
On Tue, Feb 15, 2005 at 03:51:37PM +0100, Pierre THIERRY wrote: It didn't. Strange... But I still need to know what window-manager do you use :) Sorry. KDE. Could you try with a fresh account without dot files and _not_ run update-menus there ? That will allow to narrow the problem. KDE now uses menu-xdg for menu but maybe you have remaining entries from the pre menu-xdg era. Probably this bug should be reassigned to kicker. Cheers, Bill. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295632: libmyspell3: spellchecker dictionary not installed with OpenOffice.org
Hi, Am Donnerstag, 17. Februar 2005 04:28 schrieb Yuen Boon Jee: OpenOffice.org uses myspell as the spellchecker, but no dictionary is install along with libmyspell3, rendering spellchecking to not work. This would be confusing to a person who does not know to also install one of the myspell dictionary to get spellchecking to work. Those should read openoffice.orgs package description :) It would be better if a dictionary was recommended to be installed as this package depends on a dictionar to do its work. OpenOffice.org already suggests myspell-dictionary and the various langpacks also suggest myspell-dictionary-$langcode. It is even mentioned in the package description :) Hmm. libaspell15 recommends aspell-en | aspell-dictionary. Hmm. Ok, I guess we could add a Recommends: to libmyspell3... But that won't help for people getting their dictionary for their specific language... Regards, Rene -- .''`. René Engelhard -- Debian GNU/Linux Developer : :' : http://www.debian.org | http://people.debian.org/~rene/ `. `' [EMAIL PROTECTED] | GnuPG-Key ID: 248AEB73 `- Fingerprint: 41FA F208 28D4 7CA5 19BB 7AD9 F859 90B0 248A EB73
Bug#295581: wireless-tools: if-pre-up script should load keys from file
On Thu, Feb 17, 2005 at 12:29:04PM +0100, Hadmut Danisch wrote: If you want to do this kind of stuff, I suggest you add a pre-up command to /etc/network/interfaces, like this: iface eth0 inet dhcp pre-up iwconfig $IFACE key `cat keyfile` I will not add functionality in the if-pre-up script that does not already exist in iwconfig itself. Sure this is possible. But it doesn't execute the commands in the correct order. Some wlan drivers don't accept the commands in arbitrary order. If you do it the way you describe, then the command is executed before or after your if-up script, and that fails with some card drivers. That problem has been reported before, but that is a bug in the drivers. The drivers should accept ioctls in any order, but some don't. Also, there is not one order that works well with every broken driver. If the driver you use has this problem, please convince its author to fix this! -- Met vriendelijke groet / with kind regards, Guus Sliepen [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#295677: mozilla-firefox: symbolic links are expanded in the Change Action dialog
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal When selecting a program in the Change Action dialog (Preferences-Downloads-File Types-Change Action...-Open them in this application:-Change...) is symbolic links translated to the real file. This is very bad as wrappers might have different behavior depending on the name of the symbolic link. In my case can't I use 32-bit apps from a chroot under amd64 as helpers due to this problem. / Anders -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.10 Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to sv_SE) Versions of packages mozilla-firefox depends on: ii debianutils2.10.3Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-01.8.0-4 The ATK accessibility toolkit ii libc6 2.3.2.ds1-20.0.0.1.pure64 GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc11:3.4.3-7 GCC support library ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libgtk2.0-02.4.14-2 The GTK+ graphical user interface ii libidl00.8.3-1 library for parsing CORBA IDL file ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-0 1.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1PNG library - runtime ii libstdc++6 3.4.3-7 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft22.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender10.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1Utilities that use the proc filesy ii xlibs 4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295676: mozilla-firefox: Can't write a programname in Change Action dialog
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal I can't write a programname in the Change Action dialog (Preferences-Downloads-File Types-Change Action...-Open them in this application:). I have to press Change... and use the file-browser. The text-box seems to be read-only. / Anders -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.10 Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to sv_SE) Versions of packages mozilla-firefox depends on: ii debianutils2.10.3Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-01.8.0-4 The ATK accessibility toolkit ii libc6 2.3.2.ds1-20.0.0.1.pure64 GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc11:3.4.3-7 GCC support library ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libgtk2.0-02.4.14-2 The GTK+ graphical user interface ii libidl00.8.3-1 library for parsing CORBA IDL file ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-0 1.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1PNG library - runtime ii libstdc++6 3.4.3-7 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft22.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender10.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1Utilities that use the proc filesy ii xlibs 4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294694: cdbs: simple-patchsys.mk breaks if it can't find patches
severity 294694 important tags 294694 + patch thanks Hi, On Fri, Feb 11, 2005, Andres Salomon wrote: If simple-patchsys.mk is included, and debian/patches doesn't exist (or is empty), the build just hangs. Been bitten by that as well, this is a recent breakage though. I'm attaching a patch and bumping the severity, justification: - I've found 12 packages with no debian/patches using simple-patchsys in debian/rules explicitely, - I've found 17 packages with no patches in debian/patches using simple-patch in debian/rules explicitely. and that's only in pkg-gnome. Bye, -- Loïc Minier [EMAIL PROTECTED] Neutral President: I have no strong feelings one way or the other. diff -urN cdbs-0.4.26.orig/1/rules/simple-patchsys.mk.in cdbs-0.4.26/1/rules/simple-patchsys.mk.in --- cdbs-0.4.26.orig/1/rules/simple-patchsys.mk.in 2005-02-09 14:48:53.0 +0100 +++ cdbs-0.4.26/1/rules/simple-patchsys.mk.in 2005-02-17 11:34:18.394204126 +0100 @@ -45,6 +45,9 @@ done ; \ done) +# if we have any patches, check if some are patching config.{guess,sub,rpath} +# and print a warning +ifneq (, $(DEB_PATCHES)) CDBS_BUILD_DEPENDS:= $(CDBS_BUILD_DEPENDS), patchutils evil_patches_that_do_nasty_things := $(shell\ if lsdiff=`which lsdiff` ; then \ @@ -54,6 +57,7 @@ ifneq (, $(evil_patches_that_do_nasty_things)) $(warning ** WARNING **: The following patches are modifiing auto-updated files. Please exclude the following files from your patch: $(evil_patches_that_do_nasty_things)) endif +endif post-patches:: apply-patches
Bug#295645: Grub makes bad decisions and fstab not populated
On Thursday 17 February 2005 08:27, Joel Fenwick wrote: This was my test of a clean install on a system previously running woody so the disks were already partitioned. Given recent bugs with partitioning I didn't want to write anything to the partition table. I've been using partman for over a year and have personally never experienced any breakage. There doesn't seem to be a clear way to Leave the partitions alone but mount this one as /. It seemed as if You didn't modify the partition table so you can't go on. You always have to format your / partition, but there is absolutely no requirement to change partition layout. Also what is with the little gremlin icon which appears next to swap in the partition menu? Documented on the help page available in partman. I chose grub and it didn't complain or give any error messages but on reboot it turned out it had chosen the first partition (ie swap) as the root. This is a problem. Now we get to the post first boot setup The cdrom is on hdd. Although the installer (and later gnome-auto-cd-mounter-thing) both found it, apt could not. It turns out that I don't have swap either. The reason for this seems to be that fstab was not populated and contains: # UNCONFIGURED FSTAB FOR BASE SYSTEM That is probably caused by the fact that you did not finish partitioning properly. If you decide not to use essential parts of the system, you should be prepared to deal with breakage. Cheers, FJP -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295581: wireless-tools: if-pre-up script should load keys from file
On Thu, Feb 17, 2005 at 01:33:35PM +0100, Hadmut Danisch wrote: How does one convince the author of a windows driver (used with ndiswrapper) to modify it in order to work with Linux? How does one find the author of a windows wlan driver? As the Debian maintainer of the wireless-tools package, it is not my problem. How does one convince a debian package maintainer to add three lines to a shell script which wouldn't hurt at all, just disturb him in his personal ignorance and religion? You don't. -- Met vriendelijke groet / with kind regards, Guus Sliepen [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#149425: should compress data before sending
On Thu, Feb 17, 2005 at 12:54:30PM +0100, Erik Schanze wrote: Hi @all! How about this bug? Was there any work done on it? It's open for more than 2 years now and seems not really hard to fix. Hello Erik, If it easy to fix, how would you do it ? I proposed a solution, but the other popcon maintainer disagreed, so I did not it implement it. What about this process of reorganizing and the status of the needed possibility of compressed reports? A lot of work have been done. Now we have the popcon.debian.org website and virtual host. My report is about 73k per machine and I own only a low bandwitdh modem connection, so a comression would be great. Given compressed data will need to be base64'ed, compression will not get you much: %ls -l popularity-contest* -rw-r--r--1 bill bill25912 fév 17 13:21 popularity-contest -rw-rw-r--1 bill bill11432 fév 17 13:23 popularity-contest.b64 -rw-r--r--1 bill bill 8411 fév 17 13:20 popularity-contest.gz However the current popcon server (gluck.debian.org, aka people.debian.org and a dozen other vhost) is a bit overloaded currently so I am careful about not making change that would increase the resource usage. Cheers, -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#104434: sensitive to changes around?
Do you know a better way for rx refill?Order meds online Best offfers on meds for sexual health, pain relief, women's health, men's health, anxiety, depression, hypertension and obesity. For more great offfers including bonus Rx, please browse the web pages now. Get meds ordered online and delivered with express shipping. It is really a smart decision to refill rx online and get the same quality meds at much lower prices. No time to wait for the appointment or other hassel. Just want to get the meds that is right for me QUICKLY. Now I get it. --Finding Convenience http://jiml.bigplansseen.com/pnj/ he looks at some of the sympathy cards he has received. One person wrote a message of condolence. another sent $1,000. All totaled, the contributions have come to about $8,000, which Arredondo It doesn't feel right, he says.Eight thousand dollars, however, is not $50,000, and so blackfigure 1 drawarm 17 etchingbehovesdemipike -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295681: tramp: TRAMP uses user's umask for temporary files?
Package: tramp Version: 1:2.0.47-1 Severity: normal Tags: security I just noticed that when I edited a buffer /su::/etc/apache/axkit.conf and file /tmp/#axkit.conf# was created. axkit.conf is owned by root:root on my system, and is readable only to root: -rw---1 root root4901 Feb 17 12:39 axkit.conf I don't want the contents of that file exposed... :-) The problem is that the temporary file gets a different set of permissions: -rw-r--r-- 1 kjetil kjetil4900 Feb 17 13:00 #axkit.conf# It gets the default permissions of my user. This seems to have security implications to me. The contents of this file is now easily accessible to any local user. I guess it would be OK to make the file read and writeable only to the local user by default. This user has allready legitimately accessed the file, so that should be OK. I'm submitting this only as severity normal, as I'm not confident it is a bug, it could be that I have a flawed understanding. If it is a bug it would be the first time I find a security problem! :-) What do others think? Kjetil -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2005-01-27.roo.1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages tramp depends on: ii emacs21 [emacsen] 21.3+1-8 The GNU Emacs editor -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295679: mozilla-firefox: download manager hangs when file type helper application is missing
Package: mozilla-firefox Version: 1.0+dfsg.1-2 Severity: normal The download of a file just hangs if the program associated with the file type is missing. No error message, it just hangs. An error message and a dialog to select application would be good behavior. / Anders -- System Information: Debian Release: 3.1 Architecture: amd64 (x86_64) Kernel: Linux 2.6.10 Locale: LANG=C, LC_CTYPE=C (charmap=ISO-8859-1) (ignored: LC_ALL set to sv_SE) Versions of packages mozilla-firefox depends on: ii debianutils2.10.3Miscellaneous utilities specific t ii fontconfig 2.2.3-4 generic font configuration library ii libatk1.0-01.8.0-4 The ATK accessibility toolkit ii libc6 2.3.2.ds1-20.0.0.1.pure64 GNU C Library: Shared libraries an ii libfontconfig1 2.2.3-4 generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc11:3.4.3-7 GCC support library ii libglib2.0-0 2.6.1-3 The GLib library of C routines ii libgtk2.0-02.4.14-2 The GTK+ graphical user interface ii libidl00.8.3-1 library for parsing CORBA IDL file ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii libkrb53 1.3.6-1 MIT Kerberos runtime libraries ii libpango1.0-0 1.8.0-3 Layout and rendering of internatio ii libpng12-0 1.2.8rel-1PNG library - runtime ii libstdc++6 3.4.3-7 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxft22.1.2-6 FreeType-based font drawing librar ii libxp6 4.3.0.dfsg.1-10 X Window System printing extension ii libxrender10.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-10 X Toolkit Intrinsics ii psmisc 21.5-1Utilities that use the proc filesy ii xlibs 4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295680: libc6: getgrname returns a result that doesn't belong to /etc/group
Package: libc6 Version: 2.3.2.ds1-20 Severity: important The getgrname(3) man page says: The getgrnam() function returns a pointer to a structure containing the group information from /etc/group for the entry that matches the group name name. But here, the getgrname function returns a result that doesn't belong to /etc/group, which seems to lead by side effects to a security hole (more details below). Consider the following program: #include stdio.h #include stdlib.h #include grp.h int main (int argc, char **argv) { struct group *grp; if (argc != 2) { fprintf (stderr, Usage: grname group_name\n); exit (1); } grp = getgrnam (argv[1]); if (grp == NULL) { fprintf (stderr, grname: can't find group %s\n, argv[1]); exit (2); } printf (%d (%s)\n, grp-gr_gid, grp-gr_name); return 0; } It gives here, where slocate is group 21 in NIS: $ ./grname slocate 21 (slocate) $ grep slocate /etc/group zsh: exit 1 grep slocate /etc/group $ grep 21 /etc/group fax:x:21: As a consequence: # touch blah # chown root.slocate blah # ls -l blah -rw-r--r-- 1 root fax 0 2005-02-17 13:30:13 blah ^^^ This could also explain why groupadd (to add a group to /etc/group) fails if a group with the same name exists via NIS. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10 Locale: LANG=POSIX, LC_CTYPE=en_US.ISO8859-1 (charmap=ISO-8859-1) Versions of packages libc6 depends on: ii libdb1-compat 2.1.3-7The Berkeley database routines [gl -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#287006: Hours turning into days and weeks :-(
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi all, Status update: Real life cought me, so the few hours mentioned earlier did, as you've probably noticed, turn into days and weeks :-( My packaging of 1.3.x hasn't progressed far from the stuff at http://debian.jones.dk/auryn/pool-all/official/moin/ For those of you offering to help, I still could use concrete work on non-CGI configuration and building the java module from source. Yes, I know that alot is documented in the wiki system pages - what I need is help coding this as packaging scripts, obeying Debian Policy and possibly using debconf. Regards, - Jonas - -- * Jonas Smedegaard - idealist og Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ - Enden er nær: http://www.shibumi.org/eoti.htm -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCFI8ln7DbMsAkQLgRAoB0AJ4sNLrMfAoFiwuzhQyarzu4OAr/SQCggkTW X/fseoaGmuYFBfKRmC5L/Ng= =xAj7 -END PGP SIGNATURE-
Bug#294641: Mail delivery failed: returning message to sender
reassign 294641 kicker retitle 294641 Kicker reads menu entries in XDG place, but doesn't warn about old entries in .kde thanks Could you try with a fresh account without dot files and _not_ run update-menus there ? That will allow to narrow the problem. KDE now uses menu-xdg for menu but maybe you have remaining entries from the pre menu-xdg era. Yes I had. I removed everything in .kde/share/applink, and restarted KDE (kicking kicker would have be enough, I think), and everything is nice! Probably this bug should be reassigned to kicker. Sure. Thanks for helping find the solution so quickly. Regards, Nowhere man -- [EMAIL PROTECTED] OpenPGP 0xD9D50D8A signature.asc Description: Digital signature
Bug#268795: acknowledged by developer (Bug#268795: fixed in hotplug 0.0.20040329-17)
This is still wrong in /etc/modprobe.d/isapnp/isapnp.aliases : alias pnp:dPNP0400 parport_pc alias pnp:dPNP0401 parport_pc alias pnp:dPNPb02f analog should be removed as the alias is provide by module !!! Also please note that pnp:dPNPb02f is for a gameport device (mpu401) not a joystick module so it is wrong... Matthieu
Bug#295683: menu:[INTL:zh_TW] Translation of menu sections to Traditional Chinese
Package: menu Version: 2.1.21 Severity: wishlist Tags: patch l10n Hi I finished the menu-section.po. I hope this can be included. Thanks a lot. :-) Best Regard Asho Yeh -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27 Locale: LANG=zh_TW.UTF-8, LC_CTYPE=zh_TW.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to zh_TW.UTF-8) Versions of packages menu depends on: ii dpkg1.10.26 Package maintenance system for Deb ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libgcc1 1:3.4.3-6GCC support library ii libstdc++5 1:3.3.5-8The GNU Standard C++ Library v3 -- no debconf information menu-sections_zh_TW.po.gz Description: Binary data
Bug#295682: RFS: pong2 -- Remake of old arcade classic in OpenGL
Package: wnpp Severity: normal * Package name : pong2 Version : 0.1.0-1 Upstream Author : Johannes Jordan [EMAIL PROTECTED] * URL : http://pong2.berlios.de/ * License : GPL Description : Pong2 is an up till now two player (networked) game inspired by the classical Pong from Amiga, which adds another dimension to the playing field. Crazy graphics, fast gameplay, great fun ;) . It also has multiplayer support! 2 players can play against each other. This is my first RFS. I checked my package with Matthew Palmers Checklist for sponsored uploads. It should be fine, but I'm open for any suggestions. Package builds cleanly within sarge and sid (tested with pbuilder) and has been tested on i386 and amd64. I think it is ready for inclusion in debian. You can get my source package from: http://siretart.tauware.de/pong2 signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#295684: /etc/hotplug/isapnp.rc don't for for isa pnp device...
Package: hotplug Version: 0.0.20040329-17 Severity: normal Hi, /etc/hotplug/isapnp.rc use modprobe --show-depends -q pnp:d$PNPID, but true isa device alias work with card. For exemple try to select any driver that start with pnp:c in /lib/modules/x/modules.alias, it won't work with your script. There is a workaround in hotplug script : see http://cvs.sourceforge.net/viewcvs.py/linux-hotplug/admin/etc/hotplug/pnp.rc?rev=1.1view=auto .. Matthieu -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) Versions of packages hotplug depends on: ii debconf 1.4.45 Debian configuration management sy ii grep 2.5.1.ds1-4 GNU grep, egrep and fgrep ii module-init-tools3.2-pre1-2 tools for managing Linux kernel mo ii modutils 2.4.26-1.2 Linux module utilities ii procps 1:3.2.5-1 /proc file system utilities -- debconf information: hotplug/ignore_pci_class_display: true hotplug/net_agent_policy: hotplug * hotplug/usb_keyboard: hotplug/static_module_list: hotplug/x11_usbmice_hack: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#227056: mozilla-firefox: No improvement
Package: mozilla-firefox Version: 1.0+dfsg.1-6 Followup-For: Bug #227056 There's no improvement on this problem with KDE 3.3.1 and Firefox 1.0+dfsg.1-6. Despite not being a bug AFAIK, this is an important shortcoming. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-k7 Locale: LANG=fr_CA, LC_CTYPE=fr_CA (charmap=ISO-8859-1) Versions of packages mozilla-firefox depends on: ii debianutils 2.8.4 Miscellaneous utilities specific t ii fontconfig2.2.3-4generic font configuration library ii libatk1.0-0 1.8.0-3The ATK accessibility toolkit ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libfontconfig12.2.3-4generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.1-2The GLib library of C routines ii libgtk2.0-0 2.6.2-2The GTK+ graphical user interface ii libidl0 0.8.3-1library for parsing CORBA IDL file ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii libkrb53 1.3.5-1MIT Kerberos runtime libraries ii libpango1.0-0 1.8.0-3Layout and rendering of internatio ii libpng12-01.2.8rel-1 PNG library - runtime ii libstdc++51:3.3.5-6 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-8 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-8 X Window System miscellaneous exte ii libxft2 2.1.2-6FreeType-based font drawing librar ii libxp64.3.0.dfsg.1-8 X Window System printing extension ii libxt64.3.0.dfsg.1-8 X Toolkit Intrinsics ii psmisc21.5-1 Utilities that use the proc filesy ii xlibs 4.3.0.dfsg.1-8 X Window System client libraries m ii zlib1g1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295415: amavis-ng: Fails to start with perl errors
After applying the patch, i get: AMAVIS: Couldn't init AMAVIS::MTA::Courier: at /usr/share/perl5/AMAVIS.pm line 235, GEN2 line 520. -- Best regards, Black Dew. == ~ [EMAIL PROTECTED] ~ ICQ:206 ~ 2:400/567 ~ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294072: Zile Crashed
On Fri, Feb 11, 2005 at 08:15:49AM +0100, Erwan MAS wrote: On Thu, Feb 10, 2005 at 10:08:24PM +0100, Nicolas Duboc wrote: | On Mon, Feb 07, 2005 at 07:38:55PM +0100, Erwan MAS wrote: | Package: zile | Severity: important | Tags: patch | | I have a crash of zile , on AMD64 platform . | The patch in attachement solve this problem . | | Can you detail how zile crashed ? | I compiled and used zile on amd64 and did not manage to make it crash | in 2 minutes. | [...] To crash zile in my case : - start zile - type ctrl-x and wait Erwan, Version 2.0.0-1 includes your patch. Can you confirm that you can't reproduce this bugs with 2.0.0-1 on amd64 ? Thanks, -- Nicolas Duboc [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#292137: half-patch for gramofile's bplay.c
On Tue, Feb 01, 2005 at 05:33:41PM +, Paul Brossier wrote: nice. attached is the patch corrected for fmtheaders (could benefit fiddling a bit with the line numbers to avoid the warnings). your patch seems to produce cleaner files than mine (aplay like them), altough i still get Premature EOF with. Thanks a lot! I'm puzzled about the premature EOF, though. Can you please provide me with the output of both 'hd -n 96 some.wav' and 'ls -l some.wav', in order to find out what's still going wrong here? Thanks, Daniel. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#128171: autofs: bind mounts make shortcuts impossible
Package: autofs Version: 4.1.3-8 Followup-For: Bug #128171 I think this wishlist item should actually be a bug. I have to apply the attached patch ever since I use kernels with bind mounts. The problem is that, for compatibility reasons, some of my symlinks point to other automounted directories, e.g.: wd :... exg :/fs/wd/exg/ And it's not easy nor always possible to rewrite the link to point to the file system directly (some NFS servers have problems with submounts, although, in theory, this would be solvable on the client side. It also doesn't work with local mounts, as it's not possible to point inside a non-mounted filesystem except by using symlinks). It's certainly a bug because it happens to work *sometimes* (i.e. when the other automounted directory was already mounted) and basically depends on which entry gets accessed first. I *did* talk to the upstream maintainer shortly after this was introduced, and was told that he will not make this an option (but so far, no technical reason why bind mounts are better are known to me, so I guess switching to symlinks is safe, as it's done per default on kernels not supporting bind mounts). However, because the upstream sources won't change, I guess it stays broken :) (but at least the problems and the workaround is documented in debians bts) An alternative, btw., would be to make bind mounts that point into automounted directories work, but I guess this is a basic limitation within autofs (no recursive mounts). -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (700, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.11-rc2 Locale: LANG=C, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) -- no debconf information diff --new-file -ur autofs-4.1.3/debian/patches/999_disable_bind local-autofs-4.1.3/debian/patches/999_disable_bind --- autofs-4.1.3/debian/patches/999_disable_bind1970-01-01 01:00:00.0 +0100 +++ local-autofs-4.1.3/debian/patches/999_disable_bind 2004-11-14 13:30:57.0 +0100 @@ -0,0 +1,22 @@ +diff -ruN autofs-4.1.3.orig/modules/mount_bind.c autofs-4.1.3/modules/mount_bind.c +--- autofs-4.1.3.orig/modules/mount_bind.c 2004-11-14 13:30:56.422151469 +0100 autofs-4.1.3/modules/mount_bind.c 2004-11-14 13:29:50.041021056 +0100 +@@ -61,18 +61,7 @@ + if (lstat(tmp1, st1) == -1) + goto out; + +- err = spawnl(LOG_DEBUG, MOUNTED_LOCK, +- PATH_MOUNT, PATH_MOUNT, -n, --bind, tmp1, tmp2, NULL); +- +- if (err == 0 +- lstat(tmp2, st2) == 0 +- st1.st_dev == st2.st_dev st1.st_ino == st2.st_ino) { +- bind_works = 1; +- } +- + debug(MODPREFIX bind_works = %d\n, bind_works); +- spawnl(LOG_DEBUG, MOUNTED_LOCK, +- PATH_UMOUNT, PATH_UMOUNT, -n, tmp2, NULL); + + out: + rmdir(tmp2);
Bug#233308: Esperanto translations?
Quoting Edmund GRIMLEY EVANS ([EMAIL PROTECTED]): While I'm at it, something VERY important that slept out in this discussion : the list of supported languages for sarge is *closed*. For size constraints, and for being sure that we don't induce problems with initrd size for D-I RC2 and now RC3, Joey Hess has requested that we stop adding languages to sarge-targeted D-I. It would still be nice to have the Esperanto locale in sarge, if that can be arranged. Sure. gotom and locales/glibc maintainers, any status about this old bug ? Is it delayed post-sarge, ignored (if so, it should be tagged wontfix, imho) or possible to be included in sarge? There's a chance that a translation begins for Esperanto in Debian Installer and we at least to have some visibility about the locale name. I personnally tend to favour eo_XX. Edmind has suggested eo_AQ (Antarctica), based on the special status of this territory as part of mankind's patrimonium. Others (in -esperanto) have suggested eo_EU which I don't think is appropriate for a universal language...
Bug#238533: mozilla-firefox: 1.0+dfsg.1-6 / mozilla-browser
Package: mozilla-firefox Version: 1.0+dfsg.1-6 Followup-For: Bug #238533 Note that this is still in 1.0+dfsg.1-6 and also affects mozilla-browser. A simple way to test this is sux user mozilla then start mozilla normally. Galeon/Thunderbird aren't affected by this. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-k7 Locale: LANG=fr_CA, LC_CTYPE=fr_CA (charmap=ISO-8859-1) Versions of packages mozilla-firefox depends on: ii debianutils 2.8.4 Miscellaneous utilities specific t ii fontconfig2.2.3-4generic font configuration library ii libatk1.0-0 1.8.0-3The ATK accessibility toolkit ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libfontconfig12.2.3-4generic font configuration library ii libfreetype6 2.1.7-2.3 FreeType 2 font engine, shared lib ii libgcc1 1:3.4.3-6 GCC support library ii libglib2.0-0 2.6.1-2The GLib library of C routines ii libgtk2.0-0 2.6.2-2The GTK+ graphical user interface ii libidl0 0.8.3-1library for parsing CORBA IDL file ii libjpeg62 6b-9 The Independent JPEG Group's JPEG ii libkrb53 1.3.5-1MIT Kerberos runtime libraries ii libpango1.0-0 1.8.0-3Layout and rendering of internatio ii libpng12-01.2.8rel-1 PNG library - runtime ii libstdc++51:3.3.5-6 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-8 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-8 X Window System miscellaneous exte ii libxft2 2.1.2-6FreeType-based font drawing librar ii libxp64.3.0.dfsg.1-8 X Window System printing extension ii libxt64.3.0.dfsg.1-8 X Toolkit Intrinsics ii psmisc21.5-1 Utilities that use the proc filesy ii xlibs 4.3.0.dfsg.1-8 X Window System client libraries m ii zlib1g1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295614: Fails to purge correctly
Thanks Andrew. That did the trick. If you have an opportunity, please use my home address [EMAIL PROTECTED] if I happen to be referenced. Cheers, Jason On Feb 16, 2005, at 5:17 PM, Andrew Pollock wrote: Package: argus-server Severity: grave On Wed, Feb 16, 2005 at 01:14:31PM -0600, Jason Wohlford wrote: Hi Andrew, I'm having some trouble uninstalling argus-server from Sarge. Here's my aptitude output. Any ideas? Cheers, Jason (Reading database ... 45960 files and directories currently installed.) Removing argus-server ... Purging configuration files for argus-server ... Purging init entries... Purging logfiles .. dpkg: error processing argus-server (--purge): subprocess post-removal script returned error exit status 128 Errors were encountered while processing: argus-server E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: Press return to continue. Hi Jason, As a temporary workaround, edit /var/lib/dpkg/info/argus-server.postrm and comment out everything from the first case statement to the esac statement (so the script should only have the initial shebang line and the stuff that is automatically added by dh_installdebconf) Then try to purge the package again. I'll upload a new version with a fixed postrm shortly. regards Andrew -- linux.conf.au 2005 - http://linux.conf.au/ - Birthplace of Tux April 18th to 23rd - http://linux.conf.au/ - LINUX Canberra, Australia - http://linux.conf.au/ -Get bitten! -- Jason Wohlford [EMAIL PROTECTED] http://www.davisprinting.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295415: amavis-ng: Fails to start with perl errors
On Thu, 17 Feb 2005 15:20:54 +0200 Black Dew [EMAIL PROTECTED] wrote: After applying the patch, i get: AMAVIS: Couldn't init AMAVIS::MTA::Courier: at /usr/share/perl5/AMAVIS.pm line 235, GEN2 line 520. How does the Courier section of your amavis-ng configuration file looks like ? Bye Racke -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294549: kontact: News sources doesn't show in summary
Hello and sorry for the time it took to me to reply... ZR I have the same problem, altough I would like to note, that it works ZR occasionally for me. That is sometimes nothing is there, then when I ZR return to the summary some feeds appear. I solved my problem installing dcoprss package (and so also librss1 package) and manually copying libkontact_newstickerplugin.la and libkontact_newstickerplugin.so into /usr/lib/kde3/. So, at the end, for me was a problem of missing dependencies. Thanks anyway for your email! Hope this helps, Matteo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293700: delayed NMU
Hi Yeah, I completely forgot. I assume this patch doesn't change anything else, so I think it's ok. Could you send it to me so I can do a normal upload and fix bug #295188 while I'm at it? Or you can do a non-delayed NMU and then I'll upload a -5 version right after that, whatever you think is easier. BTW and completely OT, since you showed interest in PearPC, do you have any idea how to fix bug #277996? I've been giving it some thought but didn't come to any silver bullet. Cheers and thanks On Qua, 2005-02-16 at 20:09 +0100, Robert Millan wrote: Hi! You didn't include this patch in your last upload. Since there wasn't any objection from you I assume you just forgot about it. I've uploaded a 7-day delayed NMU to correct the problem. If this is inconvenient, let me know and I'll cancel it. -- Leo Costela [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] you must cut down the mightiest tree in the forest... with... a herring! signature.asc Description: This is a digitally signed message part
Bug#295391: exim4 configuration generator is on drugs
Marc Haber writes (Re: Bug#295391: exim4 configuration generator is on drugs): What is your suggestion to handle these files, which are used to build /etc/exim4/exim4.conf.template at package build time and might be used on the target system to re-generate the template on user's request, instead? I suggest that most of the the complexity in templating system be thrown away. and when I say echo | exim iwj it does this it should give a command not found, as the binary is exim4, and is not in a normal user's path. I didn't cut-and-paste that, I'm afraid, so I must have said `exim4'. Exim 3 was never installed on this machine. 2005-02-15 15:11:31 1D14MM-0007S9-DJ = [EMAIL PROTECTED] U=iwj P=local S=261 2005-02-15 15:11:31 1D14MM-0007S9-DJ == [EMAIL PROTECTED] R=hub_user defer (-17): error in redirect data: domain missing or malformed in iwj@ What does exim -d -bt iwj say? On my reference box, iwj gets qualified to [EMAIL PROTECTED] and later an Unrouteable address. I have now deinstalled exim and replaced it with smail, so I'm afraid I can't say. Well, Tony is not known for his high opinion about the Debian exim 4 packages. I have, however, not received a single word of constructive criticism from him ever, and I doubt that he ever took a closer look at Debian policy or at the Debian exim4 packages. Are you going to claim that I'm ignorant of Debian policy or of mail configuration ? I _am_ currently largely ignorant of the Debian exim4 packages, but what I've seen does not impress me. Rest assured that the current debconf configuration scheme has been pretty extensively thought out, and we offer numerous ways to turn all the magic off and replace the magic with a more old-fashioned approach. We are, however, open to constructive criticism. I think throwing it away would be constructive. I am happily awaiting your patches. If you're just going to curse about our work without having suggestions how to do things better, kindly jump into the next lake. I would be happy to update the old smailconfig script to make it generate exim configs (and use debconf for its questions) if I thought that my patch to throw away the template system would be accepted. Ian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295688: rhythmbox could save state between sessions
Package: rhythmbox Version: 0.8.8-4 Severity: wishlist Wouldn't it be nice if rhythmbox could save its state between sessions. So if I quit and restart, it should begin by playing the same track it was playing before - ideally at the point where it left off. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (777, 'testing'), (33, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.10-ac12.piv Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages rhythmbox depends on: ii gconf2 2.8.1-4 GNOME configuration database syste ii gstreamer0.8-alsa [gstre 0.8.6-1 ALSA plugin for GStreamer ii gstreamer0.8-artsd [gstr 0.8.6-1 aRtsd plugin for GStreamer ii gstreamer0.8-esd [gstrea 0.8.6-1 Enlightened Sound Daemon plugin fo ii gstreamer0.8-flac0.8.6-1 FLAC plugin for GStreamer ii gstreamer0.8-gnomevfs0.8.6-1 Gnome VFS plugin for GStreamer ii gstreamer0.8-jack [gstre 0.8.6-1 JACK plugin for GStreamer ii gstreamer0.8-mad 0.8.6-1 MAD MPEG audio decoder plugin for ii gstreamer0.8-misc0.8.6-1 Collection of various GStreamer pl ii gstreamer0.8-oss [gstrea 0.8.6-1 OSS plugin for GStreamer ii gstreamer0.8-vorbis 0.8.6-1 Vorbis plugin for GStreamer ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.8.0-4 The ATK accessibility toolkit ii libaudiofile00.2.6-5 Open-source version of SGI's audio ii libbonobo2-0 2.8.0-4 Bonobo CORBA interfaces library ii libbonoboui2-0 2.8.0-2 The Bonobo UI library ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libesd-alsa0 [libesd0] 0.2.35-2Enlightened Sound Daemon (ALSA) - ii libgconf2-4 2.8.1-4 GNOME configuration database syste ii libgcrypt11 1.2.0-4 LGPL Crypto library - runtime libr ii libglade2-0 1:2.4.1-2 library to load .glade files at ru ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libgnome-keyring00.4.1-1 GNOME keyring services library ii libgnome2-0 2.8.0-6 The GNOME 2 library - runtime file ii libgnomecanvas2-02.8.0-1 A powerful object-oriented display ii libgnomeui-0 2.8.0-3 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.8.3-11The GNOME virtual file-system libr ii libgnutls11 1.0.16-9GNU TLS library - runtime library ii libgpg-error01.0-1 library for common error values an ii libgstreamer-gconf0.8-0 0.8.6-1 GConf support for GStreamer ii libgstreamer0.8-00.8.8-1 Core GStreamer libraries, plugins, ii libgtk2.0-0 2.4.14-2The GTK+ graphical user interface ii libhowl0 0.9.8-2 Library for Zeroconf service disco ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libjpeg626b-9The Independent JPEG Group's JPEG ii liborbit21:2.10.2-1.1libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libtasn1-2 0.2.10-3Manage ASN.1 structures (runtime) ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxml2 2.6.16-2GNOME XML library ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-3 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295687: base-config: late_command run with TMPDIR not world-writable
Package: base-config Version: 2.53.5 Severity: normal I'm building a custom Debian distribution based on the Debian installer. I have preseeded a number of debconf settings amongst which base-config/late_command is set to install some additional packages. It is set to this value: mount /cdrom; dpkg --set-selections /cdrom/get-selections.txt; apt-get -y dselect-upgrade; eject /cdrom One of the packages installed is clamav-daemon. When its postinst script runs it tries to start the daemon (standard debhelper code), which fails like this: Starting ClamAV daemon: LibClamAV Error: cli_cvdload(): Can't create temporary directory /tmp/base-config.1141/clamav-c72 [...] invoke-rc.d: initscript clamav-daemon action start failed. Although clamav fails to tell why it can't create that directory, I'm pretty sure it is because /tmp/base-config.1141 has mode 0755, not 1777 like /tmp normally has. ClamAV runs as its own user, so it can't access the TMPDIR, where it tries to create its temporary directory. In any case, changing the value of base-config/late_command to TMPDIR=/tmp; export TMPDIR; mount /cdrom; dpkg --set-selections /cdrom/get-selections.txt; apt-get -y dselect-upgrade; eject /cdrom makes the problem go away. Please make sure that TMPDIR has the correct permissions at all times. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295636: aptitude crash if it run by $USER and not root
On Wednesday 16 February 2005 11:25 pm, Michelle Konzack wrote: Version: 0.2.11.1-4 Does this also happen with the version in sarge? Daniel -- /--- Daniel Burrows [EMAIL PROTECTED] --\ | Whoever fights monsters should see to it that in the | | process he does not become a monster. And when you look | | into an abyss, the abyss also looks into you. | | -- Friedrich Nietzsche | \ The Turtle Moves! -- http://www.lspace.org ---/ pgpYB8njtXSrV.pgp Description: PGP signature
Bug#294180: Interface renaming
severity 294180 important merge 294180 29 thanks On Thu, Feb 17, 2005 at 08:19:46AM +0100, Thomas Hood wrote: OK, I change my statement to udev makes ifrename unnecessary in many cases. I agree with you that ifrename should be supported. It should certainly be supported when hotplug is installed and udev is not. I would like to see it supported when both hotplug and udev are installed but the udev maintainer may not want that. I've followed the discussion and I understand the current situation is problematic, mainly because there are so many ways to detect and bring up network interfaces. Although I understand why both #294180 and #29 have been (re)assigned to ifrename, there is not much I can do about it (call me a zombie if you want). The ifrename package does not contain an init script (I don't think anyone knows which priority it should have) nor hook scripts for any other package. Rather than reassigning bugs again, I have created a Wiki page where we can discuss this problem in a more constructive way (hopefully): http://wiki.debian.net/?InterfaceRenaming Please add your comments there. -- Met vriendelijke groet / with kind regards, Guus Sliepen [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#295691: ctrlproxy: Please add support for more IRC clients (e.g. ksirc)
Package: ctrlproxy Version: 2.6.1-1 Severity: wishlist ksirc, konversation, mIRC (at least) cannot connect to the current version of ctrlproxy (2.6.1-1). This seems to have been fixed in the Subversion tree of the stable version: Ctrlproxy 2.6.2: * Don't crash when linestack_send() gets NULL as linestack * Support mIRC and ksirc * Support halfops Would it be possible to have either this version packaged or the patch applied? Thank you. Regards, Hugo -- System Information: Versions of packages ctrlproxy depends on: ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an ii libglib2.0-02.6.2-1 The GLib library of C routines ii libpopt01.7-5lib for parsing cmdline parameters ii libssl0.9.7 0.9.7e-2 SSL shared libraries ii libxml2 2.6.16-2 GNOME XML library ii zlib1g 1:1.2.2-3compression library - runtime -- no debconf information -- Hugo Haas - http://larve.net/people/hugo/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295683: menu:[INTL:zh_TW] Translation of menu sections to Traditional Chinese
tags 295683 pending quit On Fri, Feb 18, 2005 at 04:52:19AM +0800, Asho Yeh wrote: Package: menu Version: 2.1.21 Severity: wishlist Tags: patch l10n Hi I finished the menu-section.po. I hope this can be included. Thanks a lot. :-) Hello Asho, I have checked it and commited them to the menu CVS on alioth. It will be included in menu 2.1.22. Thanks for your work! -- Bill. [EMAIL PROTECTED] Imagine a large red swirl here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#293700: delayed NMU
On Thu, Feb 17, 2005 at 11:57:32AM -0200, Leo Antunes wrote: Hi Yeah, I completely forgot. I assume this patch doesn't change anything else, so I think it's ok. Could you send it to me so I can do a normal upload and fix bug #295188 while I'm at it? Or you can do a non-delayed NMU and then I'll upload a -5 version right after that, whatever you think is easier. The patch is the same I sent before, but updated to apply to the latest version. I just uploaded it to ftp-master, you'll be able to fetch the package from incoming in a few minutes. BTW and completely OT, since you showed interest in PearPC, do you have any idea how to fix bug #277996? I've been giving it some thought but didn't come to any silver bullet. Why don't you put them in /usr/share/pearpc? As for searching for the scripts directory, my suggestion is to look for them in /usr/share/pearpc before trying ./scripts. You could even use an environmental variable to override this. -- .''`. Proudly running Debian GNU/kFreeBSD unstable/unreleased (on UFS2+S) : :' : `. `'http://www.debian.org/ports/kfreebsd-gnu `- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295692: monodevelop: Package description has a type-o
Package: monodevelop Version: 0.5.1-2 Severity: minor Package description looks like: C#/Java/Nermele/ILasm Development Environment the word Nermele should be Nemerle, I guess. Thanks, -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages monodevelop depends on: ii eterm [x-terminal-emulat 0.9.2-8 Enlightened Terminal Emulator ii gnome-icon-theme 2.8.0-1 GNOME Desktop icon theme ii gnome-terminal [x-termin 2.8.2-1 The GNOME 2 terminal emulator appl ii libatk1.0-0 1.9.0-1 The ATK accessibility toolkit ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libgconf-cil 1.0.4-1 .NET binding for GConf ii libgecko-cil 0.6-1 .NET binding for the GtkMozEmbed l ii libglade-cil 1.0.4-1 .NET binding for the Glade librari ii libglade2-0 1:2.4.2-1 library to load .glade files at ru ii libglib-cil 1.0.4-1 .NET binding for the GLib utility ii libglib2.0-0 2.6.2-1 The GLib library of C routines ii libgnome-cil 1.0.4-1 .NET binding for GNOME ii libgnomevfs2-0 2.8.3-11The GNOME virtual file-system libr ii libgtk-cil 1.0.4-1 .NET binding for the Gtk+ toolkit ii libgtk2.0-0 2.6.2-3 The GTK+ graphical user interface ii libgtksourceview-cil 0.5-2 .NET binding for the gtksourceview ii libgtksourceview1.0-01.1.1-1 Shared libraries for the GTK+ synt ii libpango1.0-01.8.0-3 Layout and rendering of internatio ii libxml2 2.6.16-2GNOME XML library ii mono-assemblies-base 1.0.5-3 Mono class library ii mono-jit 1.0.5-2 fast CLI/.NET JIT compiler for Mon ii mono-mcs 1.0.5-3 Mono C# compiler ii monodoc-base 1.0.4-1 shared MonoDoc binaries ii monodoc-manual 1.0.4-1 compiled XML documentation from th ii pkg-config 0.15.0-4Manage compile and link flags for ii xterm [x-terminal-emulat 4.3.0.dfsg.1-10 X terminal emulator ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#295693: Should use 'vesa' as fallback if detection of X driver fails.
Package: xdebconfigurator Severity: normal Hello, IMO, the fallback to vesa need to be included. If it's don't know the driver to be used for X vesa should be used. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (900, 'unstable'), (700, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-k7 Locale: LANG=pt_BR, LC_CTYPE=pt_BR (charmap=ISO-8859-1) Versions of packages xdebconfigurator depends on: ii debconf [debconf-2.0]1.4.45 Debian configuration management sy pn discover1 | discover Not found. ii kudzu1.1.67-1The Red Hat Linux hardware probing ii perl-modules 5.8.4-6 Core Perl modules ii xserver-common 4.3.0.dfsg.1-10 files and utilities common to all ii xserver-xfree86 4.3.0.dfsg.1-10 the XFree86 X server -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]