date:20060712

Tim Cutts [EMAIL PROTECTED] (12/07/2006):
 Thank you very much for your comments - as it happens, I agree with  
 most of them.  The templates file is very much as I inherited it when  
 I took over the package 18 months ago, I'd just never changed it  
 because I didn't want to cause the translators too much work.

Sure, but translators will thank you if they have correct templates to
translate. That's much more easy for them :-)

If you want to keep up-to-date translations, do not hesitate to use the
podebconf-report-po tool to ask translators for updated translations
before publishing a new version of your templates.
To do this, fix your templates, include all the translations you have
in the BTS, run debconf-updatepo, use the podebconf-report-po tool, and
wait something like 10 days (as the review process may take some time)
for updated translations, and then publish your new package with the new
translations.

Cheers,

-- 
Thomas Huriaux


signature.asc
Description: Digital signature

Bug#376525: libsndfile: FTBFS on GNU/kFreeBSD (due to unsatisfied Build-Depends on libasound2-dev)

2006-07-12 Thread Anand Kumria

Hi Petr,

On Mon, Jul 03, 2006 at 03:08:40PM +0200, Petr Salinger wrote:
 Package: libsndfile
 Version: 1.0.16-1
 Severity: important
 
 Hi,
 
 the current version has unsatisfied Build-Depends on 
 libasound2-dev under non-linux ports.
 
 This package is able to use OSS under GNU/kFreeBSD,
 it builds fine without libasound2-dev installed.

I specifically made the switch to using libasound as sndfile-programs
did not work when using OSS (on Linux).

 Please, could you exclude linux specific package in Build-Depends
 by using libasound2-dev [!kfreebsd-i386 !kfreebsd-amd64 !hurd-i386].

If you could confirm that #350807 does NOT affect FreeBSD machines, then
I can do this. If not, I'll have to disable sndfile-programs on !linux.

Thanks,
Anand

-- 
 `When any government, or any church for that matter, undertakes to say to
  its subjects, This you may not read, this you must not see, this you are
  forbidden to know, the end result is tyranny and oppression no matter how
  holy the motives' -- Robert A Heinlein, If this goes on --


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#373921: i2o_block

2006-07-12 Thread Robert Millan [ackstorm]


Will this cause both modules (dpt_i2o and i2o_block) to be loaded at the same
time on i386 ?  IIRC no proper locking is implemented, so loading both modules
would lead to kernel crash.

If this is so, I suggest we put this on hold untill it can be verified.

-#SUBSYSTEM==i2o, RUN+=/sbin/modprobe i2o-block
+SUBSYSTEM==i2o,  RUN+=/sbin/modprobe i2o-block

-- 
Robert Millan

ACK STORM, S.L.  -  http://www.ackstorm.es


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377531: openoffice.org-dev: unowinreg.dll should be included

2006-07-12 Thread Martin Kretzschmar


Just trying to get around having to write the makefile patch ;-)


 However, I am very grateful that you have tried this. Could you please
 provide a little more details about how did you compile your dll? I'd
 like to repeat your method and see if I can somehow get it working...
 Maybe not, I'm just interested.

apt-get install mingw32
cd OOo source/odk/source/unowinreg/win
i586-mingw32msvc-gcc -shared -I/usr/lib/jvm/java-gcj/include -o unowinreg.dll 
unowinreg.c -lkernel32 -ladvapi32
i586-mingw32msvc-strip unowinreg.dll


There's a (non-cross-compiling) FAQ for mingw/JNI here:
http://www.mingw.org/mingwfaq.shtml#faq-jni-dll

You could try with the extra -D_JNI_IMPLEMENTATION_ -Wl,--kill-at
arguments. The kill-at might be interesting because without it,
strings unowinreg.dll | grep RegOpenCurrentUser shows

[EMAIL PROTECTED]

and with --kill-at, the @12 was killed

Java_com_sun_star_lib_loader_WinRegKey_winreg_1RegOpenCurrentUser

(See also man ld)

HTH,
Martin


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#268291: gnucash: There was an unknown error while retrieving the price quotes

2006-07-12 Thread Neil Williams

Dear Wolfgang,

It's been two years since you reported this bug and a new version of
gnucash is now in unstable. Without a test file, it is not possible to
determine whether or not this is a bug at all.

If you are still experiencing this problem and you are able to provide a
test file (direct to either myself or Thomas if you are unable to remove
all private data from the test file), please let us know. Otherwise,
I'll close this bug report.

-- 

Neil Williams
=
http://www.data-freedom.org/
http://www.nosoftwarepatents.com/
http://www.linux.codehelp.co.uk/




signature.asc
Description: OpenPGP digital signature

Bug#236127: gq: adding servers is still not saved in the configuration

2006-07-12 Thread Michael Deegan

package gq
reopen 236127
thank you very much (uh huh)

On Mon, 22 May 2006 13:40:15 +0200, Guido Trotter [EMAIL PROTECTED] wrote:
 This is fixed by the latest gq 1.0.0 upload

I assume you are referring to 1.0.0-3.

Unfortunately, new servers still get deleted as soon as one presses Okay in
the Preferences dialog.

Changing existing server definitions does seem to work though.

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable'), (495, 'unstable'), (1, 
'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16.14
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)

Versions of packages gq depends on:
ii  libatk1.0-01.11.4-2  The ATK accessibility toolkit
ii  libc6  2.3.6-15  GNU C Library: Shared libraries
ii  libcairo2  1.2.0-2   The Cairo 2D vector graphics libra
ii  libfontconfig1 2.3.2-7   generic font configuration library
ii  libglib2.0-0   2.10.2-1  The GLib library of C routines
ii  libgtk2.0-02.8.18-1  The GTK+ graphical user interface 
ii  libldap2   2.1.30-13+b1  OpenLDAP libraries
ii  libpango1.0-0  1.12.3-1  Layout and rendering of internatio
ii  libssl0.9.80.9.8b-2  SSL shared libraries
ii  libx11-6   2:1.0.0-7 X11 client-side library
ii  libxcursor11.1.5.2-5 X cursor management library
ii  libxext6   1:1.0.0-4 X11 miscellaneous extension librar
ii  libxfixes3 1:3.0.1.2-4   X11 miscellaneous 'fixes' extensio
ii  libxi6 1:1.0.0-5 X11 Input extension library
ii  libxinerama1   1:1.0.1-4 X11 Xinerama extension library
ii  libxml22.6.26.dfsg-1 GNOME XML library
ii  libxrandr2 2:1.1.0.2-4   X11 RandR extension library
ii  libxrender11:0.9.0.2-4   X Rendering Extension client libra
ii  zlib1g 1:1.2.3-11compression library - runtime

gq recommends no packages.

-- no debconf information

-- 
__ 
Michael Deegan, Unix Server Administrator, Murdoch University. Ph +61893606967


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#322762: Done in NMU

tags 322762 fixed
thanks

-- 
 .''`. Fuck your fascist beauty standards
: :' :   
`. `'   Proudly running unstable Debian GNU/Linux
  `- www.amayita.com  www.malapecora.com  www.chicasduras.com


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377959: linux-image-2.6.17-1-686: abysmal disk throughput

2006-07-12 Thread Toni Mueller

Package: linux-image-2.6.17-1-686
Version: 2.6.17-2
Severity: important


Hello,

I have a severe problem running this kernel in that it brings my
computer to a crawl, compared to the 2.6.16-1-686-smp kernel I was
running before, and am running again until this problem is fixed. The
dmesg as created by the 2.6.16 kernel is included below, and you can see
that this machine should be reasonably fast (it is, under older 2.6.x
kernels). But actual performance looks like this:


Starting X (fvwm): some 5 minutes instead of some 10-20 seconds

baz commit, worth 1 revision and some 100KB data in some 10-15 small
files (ie, nothing): around 7 minutes instead of 5 seconds

Unpacking a small tarball (273 KB, psycopg 2.0.2): ~1 file per second

and so forth


In other words, this kernel makes the machine unusable for me.


This is the dmesg of the machine, as created by the 2.6.16 kernel I'm
running:

Linux version 2.6.16-1-686-smp (Debian 2.6.16-12) ([EMAIL PROTECTED]) (gcc 
version 4.0.4 20060422 (prerelease) (Debian 4.0.3-2)) #2 SMP Thu May 4 18:28:53 
UTC 2006
BIOS-provided physical RAM map:
 BIOS-e820:  - 0009fc00 (usable)
 BIOS-e820: 0009fc00 - 000a (reserved)
 BIOS-e820: 000e8000 - 0010 (reserved)
 BIOS-e820: 0010 - 3ffb (usable)
 BIOS-e820: 3ffb - 3ffc (ACPI data)
 BIOS-e820: 3ffc - 3fff (ACPI NVS)
 BIOS-e820: 3fff - 4000 (reserved)
 BIOS-e820: fec0 - fec01000 (reserved)
 BIOS-e820: fee0 - fee01000 (reserved)
 BIOS-e820: ff7c - 0001 (reserved)
0MB HIGHMEM available.
1023MB LOWMEM available.
On node 0 totalpages: 262064
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 257968 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM) @ 0x000f8db0
ACPI: RSDT (v001 A M I  OEMRSDT  0x11000503 MSFT 0x0097) @ 0x3ffb
ACPI: FADT (v002 A M I  OEMFACP  0x11000503 MSFT 0x0097) @ 0x3ffb0200
ACPI: MADT (v001 A M I  OEMAPIC  0x11000503 MSFT 0x0097) @ 0x3ffb0390
ACPI: OEMB (v001 A M I  AMI_OEM  0x11000503 MSFT 0x0097) @ 0x3ffc0040
ACPI: DSDT (v001  K8UNF K8UNF150 0x0150 INTL 0x02002026) @ 0x
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee0
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec0, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 5000 (gap: 4000:bec0)
Built 1 zonelists
Kernel command line: root=/dev/sda1 ro ramdisk_size=10 lang=us 
apm=power-off nomce vga=normal 
mapped APIC to d000 (fee0)
mapped IOAPIC to c000 (fec0)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2009.787 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 1030560k/1048256k available (1504k kernel code, 17132k reserved, 546k 
data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4026.11 BogoMIPS (lpj=2013056)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff   0001 
 0001
CPU: After vendor identify, caps: 078bfbff e3d3fbff   0001 
 0001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff  0410 0001 
 0001
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
Total of 1 processors activated (4026.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 4535k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI:

Bug#377857: occasional SIGSEGV in exim4 under heavy load

2006-07-12 Thread Marc Haber

On Tue, Jul 11, 2006 at 06:19:38PM +0100, Chris Lightfoot wrote:
 Package: exim4-daemon-heavy
 Version: 4.50-8sarge2

Can you try to reproduce this with a later exim version, like 4.62 on
testing or unstable, or a backport on stable?

Greetings
Marc

-- 
-
Marc Haber | I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things.Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 621 72739835


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377963: cdbs hardcordes the python versions

Package: cdbs
Version: 0.4.44

/usr/share/cdbs/1/class/python-distutils.mk: DEB_PYTHON_VERSIONS = 2.1 2.2 2.3 
2.4 2.5


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377857: further observations with exim4-daemon-light

2006-07-12 Thread Marc Haber

On Wed, Jul 12, 2006 at 10:44:58AM +0100, Chris Lightfoot wrote:
 LD_PRELOAD=/lib/libpthread.so.0 /usr/sbin/exim4 -bd -q30m

In my unstable chroot, this leads to a relocation error message:

$ sudo env LD_PRELOAD=/lib/libpthread.so.0  /usr/sbin/exim4 -bd -q30m
/usr/sbin/exim4: relocation error: /lib/libpthread.so.0: symbol _h_errno, 
version GLIBC_2.0 not defined in file libc.so.6 with link time reference

Greetings
Marc

-- 
-
Marc Haber | I don't trust Computers. They | Mailadresse im Header
Mannheim, Germany  |  lose things.Winona Ryder | Fon: *49 621 72739834
Nordisch by Nature |  How to make an American Quilt | Fax: *49 621 72739835


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377964: cdbs should use the unversioned interpreter for the default python version

Package: cdbs
Version: 0.4.44
Severity: important

the interpreter is used by installation scripts to set the interpreter
name in scripts, leading to hash lines /usr/bin/python2.3, which
dh_python then turns into a python2.3 dependency. Please call the
unversioned interpreter for the default python version.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377966: apple2: Incorrect title in debconf template

Package: apple2
Severity: minor

Hi,

The short description of a note template should be considered as a
title. I would therefore rephrase
If you want sound the xapple2 binaries must run suid root.
with
Suid root needed to have sound


However, this template looks more like a debconf abuse. Pausing the
installation process to warn about a functionnality that is not the core
of the package is pointless.
This information probably belongs to the README.Debian file.

Cheers,

-- 
Thomas Huriaux


signature.asc
Description: Digital signature

Bug#377967: bozohttpd: special characters in URLs don't work anymore since 20060517-1

2006-07-12 Thread Christopher Zimmermann

Package: bozohttpd
Severity: normal

Hi, 

since 20060517-1 bozohttpd cannot handle URLs with special characters
like umlauts (èéäöüß) anymore. For example
http://abi.madroach.dyndns.org/gallery/Ausflüge/index.html
did work in 20050410-4 and stopped working in 20060517-1.

Thanks, 
Christopher Zimmermann


-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/dash
Kernel: Linux 2.6.17.4
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377962: xemacs21: The root info buffer is weird.

2006-07-12 Thread Sergei Organov

Package: xemacs21
Version: 21.4.19-1
Severity: normal

after invoking M-x info, besides rather long time for main info page
to come up and a few warnings:

Composing main Info directory...
Creating temporary dir in /usr/share/xemacs21/xemacs-packages/info/...
File not found and directory write-protected
Creating temporary dir in /usr/share/xemacs21/xemacs-packages/info/...done
Creating temporary dir in /usr/share/xemacs21/mule-packages/info/...
File not found and directory write-protected
Creating temporary dir in /usr/share/xemacs21/mule-packages/info/...done
Composing main Info directory...done

the ugly looking Info buffer appears that besides its ugliness doesn't
include, for example, anything from /usr/share/info/xemacs21:

$ ls /usr/share/info/xemacs21
cl.info.gz   lispref.info-5.gztexinfo.info.gz
custom.info.gz   lispref.info-6.gzwidget.info.gz
emodules.info.gz lispref.info-7.gzxemacs-faq.info-1.gz
external-widget.info.gz  lispref.info-8.gzxemacs-faq.info-2.gz
info.info.gz lispref.info-9.gzxemacs-faq.info.gz
internals.info-1.gz  lispref.info.gz  xemacs.info-1.gz
internals.info-2.gz  new-users-guide.info.gz  xemacs.info-2.gz
internals.info.gzstandards.info.gzxemacs.info-3.gz
lispref.info-1.gztermcap.info.gz  xemacs.info-4.gz
lispref.info-2.gzterm.info.gz xemacs.info.gz
lispref.info-3.gztexinfo.info-1.gz
lispref.info-4.gztexinfo.info-2.gz

The contents of the info screen is as follows (besides other minor
issues like multiple appearance of TeX subsections, I believe first
lines up to first occurrence of the Development section should in fact
be in some subsection(s)):

File: dir   Node: Top   This is the top of the INFO tree
  This (the Directory node) gives a menu of major topics.

* Menu: The list of major topics begins on the next line.

Info files in /usr/share/xemacs21/mule-packages/info/:

* Latin-Euro-Standards::  [No description available]
* Latin-Unity::   [No description available]
* Lookup-Guide::  [No description available]
* Lookup::[No description available]
* Mule-Ucs::  [No description available]
* Skk::   [No description available]



Info files in /usr/share/xemacs21/xemacs-packages/info/:

* Auctex:: [No description available]
* Bbdb::   [No description available]
* Build::  [No description available]
* Calc::   [No description available]
* Cc-Mode::[No description available]
* Clearcase::  [No description available]
* Ecb::[No description available]
* Ediff::  [No description available]
* Edit-Utils:: [No description available]
* Efs::[No description available]
* Eieio::  [No description available]
* Elib::   [No description available]
* Emacs-Mime:: [No description available]
* Eshell:: [No description available]
* Eudc::   [No description available]
* Fontconfig:: [No description available]
* Forms::  [No description available]
* Gnats::  [No description available]
* Gnus-Mime-En::   [No description available]
* Gnus-Mime-Ja::   [No description available]
* Gnus::   [No description available]
* Hm--Html-Mode::  [No description available]
* Hyperbole::  [No description available]
* Idlwave::[No description available]
* Ilisp::  [No description available]
* Ispell:: [No description available]
* Mailcrypt::  [No description available]
* Message::[No description available]
* Mew-Ja:: [No description available]
* Mew::[No description available]
* Mh-E::   [No description available]
* Mmm::[No description available]
* Oo-Browser:: [No description available]
* Os-Utils::   [No description available]
* Patcher::[No description available]
* Pcl-Cvs::[No description available]
* Pgg::[No description available]
* Prog-Modes:: [No description available]
* Psgml-Api::  [No description available]
* Psgml::  [No description available]
* Re-Builder:: [No description available]
* Reftex:: [No description available]
* Riece-En::   [No description available]
* Riece-Ja::   [No description available]
* Rmail::  [No description available]
* Sasl::   [No description available]
* Semantic::   [No description available]
* Send-Pr::[No description available]
* Sieve::  [No description available]
* Sml-Mode::   [No description available]
* Smtpmail::   [No description available]
* Speedbar::   [No description available]
* Supercite::  [No description available]
* Tempo::  [No description available]
* Tm-Edit-En:: [No description available]
* Tm-Edit-Ja:: [No description available]
* Tm-En::  [No description

Bug#377657: NMU: convert rpm to the updated Python policy

2006-07-12 Thread Anand Kumria

Hi Matthias,

Have you tested this with any software dependant on RPM or is this a
mechanical conversion?

I'm particularly concerned as alien, yum and a few other tools use rpm
(and in the case of yum, the python interfaace) and as far as I knew
this conversion would break things.

Anand

On Mon, Jul 10, 2006 at 03:55:51PM +0200, Matthias Klose wrote:
 Package: rpm
 
 diff -u rpm-4.4.1/debian/changelog rpm-4.4.1/debian/changelog
 --- rpm-4.4.1/debian/changelog
 +++ rpm-4.4.1/debian/changelog
 @@ -1,3 +1,10 @@
 +rpm (4.4.1-9.1) unstable; urgency=low
 +
 +  * NMU.
 +  * Convert to updated Python policy.
 +
 + -- Matthias Klose [EMAIL PROTECTED]  Mon, 10 Jul 2006 14:24:07 +0200
 +
  rpm (4.4.1-9) unstable; urgency=low
  
* Synchronize to Ubuntu
 diff -u rpm-4.4.1/debian/control rpm-4.4.1/debian/control
 --- rpm-4.4.1/debian/control
 +++ rpm-4.4.1/debian/control
 @@ -1,9 +1,10 @@
  Source: rpm
  Section: admin
  Priority: optional
 -Build-Depends: debhelper (= 5), libtool, autoconf, automake1.9, zlib1g-dev, 
 libbz2-dev, libdb3-dev, dpkg-dev (= 1.9.0), libpopt-dev (= 1.6.4), 
 python2.4-dev, libbeecrypt6-dev, libneon25-dev, libxml2-dev, 
 libreadline5-dev, libselinux1-dev, libsepol1-dev, libsqlite3-dev, python-dev
 +Build-Depends: debhelper (= 5.0.37.1), libtool, autoconf, automake1.9, 
 zlib1g-dev, libbz2-dev, libdb3-dev, dpkg-dev (= 1.9.0), libpopt-dev (= 
 1.6.4), python-all-dev, libbeecrypt6-dev, libneon25-dev, libxml2-dev, 
 libreadline5-dev, libselinux1-dev, libsepol1-dev, libsqlite3-dev, 
 python-central (= 0.5)
  Maintainer: Anibal Monsalve Salazar [EMAIL PROTECTED]
  Uploaders: Anand Kumria [EMAIL PROTECTED], VÃctor PÃ©rez Pereira [EMAIL 
 PROTECTED]
 +XS-Python-Version: all
  Standards-Version: 3.7.2
  
  Package: rpm
 @@ -62,11 +63,15 @@
   .
Homepage: http://rpm.org/
  
 -Package: python2.4-rpm
 +Package: python-rpm
  Architecture: any
  Section: python
  Priority: extra
  Depends: ${misc:Depends}, ${shlibs:Depends}, ${python:Depends}
 +Conflicts: python2.3-rpm, python2.4-rpm
 +Replaces: python2.3-rpm, python2.4-rpm
 +Provides: ${python:Provides}
 +XB-Python-Version: ${python:Versions}
  Description: Python bindings for RPM
   This library allows programs to make use of a rpm database or rpm packages
   without going through the rpm program.
 diff -u rpm-4.4.1/debian/rules rpm-4.4.1/debian/rules
 --- rpm-4.4.1/debian/rules
 +++ rpm-4.4.1/debian/rules
 @@ -2,6 +2,9 @@
  
  export DH_VERBOSE=1
  
 +PYDEF:= $(shell pyversions -vd)
 +PYVERS   := $(shell pyversions -vr debian/control)
 +
  makefiles:
   cd popt  aclocal  libtoolize --copy --force  automake -c -i  
 autoconf  ./configure
   #cd beecrypt  aclocal-1.7  libtoolize --copy --force  
 automake-1.7 -i -a -c -f  autoconf
 @@ -9,7 +12,7 @@
   #libtoolize --copy --force
   #automake-1.7 -i -a -c -f
   #autoconf
 - ./configure --prefix=/usr --mandir=/usr/share/man --enable-shared 
 --with-python=2.4
 + ./configure --prefix=/usr --mandir=/usr/share/man --enable-shared 
 --with-python=$(PYDEF)
   touch makefiles
  
  build: build-stamp
 @@ -32,6 +35,16 @@
   ./rpmio/.libs/librpmio.a -L/usr/local/lib -lbeecrypt -lneon \
   -lssl -lcrypto -lxml2 -lm -lsqlite3 -lz -lbz2 -lpopt -ldb \
   -lselinux -lsepol -ldl -lpthread --static
 + set -e; \
 + for v in $(filter-out $(PYDEF), $(PYVERS)); do \
 +   rm -rf python$$v; \
 +   cp -a python python$$v; \
 +   $(MAKE) -C python$$v clean \
 + subdir=python$$v WITH_PYTHON_VERSION=$$v; \
 +   $(MAKE) -C python$$v \
 + subdir=python$$v WITH_PYTHON_VERSION=$$v \
 + pylibdir=/usr/lib/python$$v pyincdir=/usr/include/python$$v; \
 + done
   touch build-stamp
  
  clean:
 @@ -39,6 +52,7 @@
   dh_testroot
   rm -f build-stamp makefiles
   -$(MAKE) distclean
 + rm -rf python?.?
   # My diff is big enough without this crap, thank you all the same.
   rm -rf apidocs beecrypt/autom4te.cache popt/autom4te.cache
   find -name Makefile |grep -v intl |xargs rm -f
 @@ -60,6 +74,12 @@
   dh_clean -k
   dh_installdirs
   $(MAKE) DESTDIR=`pwd`/debian/tmp install
 + set -e; \
 + for v in $(filter-out $(PYDEF), $(PYVERS)); do \
 +   $(MAKE) -C python$$v install DESTDIR=`pwd`/debian/tmp \
 + subdir=python$$v WITH_PYTHON_VERSION=$$v \
 + pylibdir=/usr/lib/python$$v pyincdir=/usr/include/python$$v; \
 + done
   # Kill all the junk this installs.
   rm -f debian/tmp/usr/lib/rpm/config.guess \
   debian/tmp/usr/lib/rpm/config.sub \
 @@ -70,15 +90,16 @@
   # remove popt
   rm -rf debian/tmp/usr/share/man/man3
   rm -f debian/tmp/usr/include/popt.h
 - rm -f debian/tmp/usr/lib/python2.4/site-packages/poptmodule.*
 + rm -f debian/tmp/usr/lib/python*/site-packages/poptmodule.*
   find debian/tmp -name popt.mo |xargs rm
   find debian/tmp/usr/share/locale -empty |xargs

Bug#377961: aolserver4: Incorrect debconf templates

Package: aolserver4
Severity: minor
Tags: patch

Hi,

There are different problems with your debconf templates. A full patch
is attached, here are my comments:

-Template: aolserver4/introduction
-Type: note
-_Description:  Welcome to the AOLserver 4.
- AOLserver is a multithreaded, Tcl-enabled, high-performance webserver.
- .
- This software is designed to run multiple domains on a single machine. 
- We will set up just one (main) right now. You can modify the configuration 
- file in /etc/aolserver4 and its init script yourself for more complicated 
- configurations.

Please remove this template, this is typical debconf abuse. It annoys
the user by pausing the installation process with a template that has no
added value for the configuration of the package. This information
belong partly to the package description, partly to the normal
documentation of the package.

 Template: aolserver4/hostname
 Type: string
 Default: localhost
-_Description:  Enter an hostname:
+_Description: Hostname of the server:

Do not use any imperative form, as the user is clever enough to know
that he/she has to enter something.

@@ -22,10 +12,10 @@
 Template: aolserver4/address
 Type: string
 Default: 127.0.0.1
-_Description:  Enter an IP address number:
+_Description: IP address to listen to:

See above.

  The server needs at least an IP address to listen to.
  It is generally the primary Ethernet interface (or the loopback address,
- if you would to use the server just locally).
+ if you would like to use the server just locally).

I'm not a native speaker, but like seems to be missing.

 Template: aolserver4/port
 Type: string
 Default: 80
-_Description:  Enter a TCP port:
+_Description: TCP port:

See above.

- It is recommended that you use the default.
+ The default is recommanded.

Suggested rephrasing.

- .
+

This is pointless at the end of a template.

Cheers,

-- 
Thomas Huriaux
--- aolserver4.templates.orig   2006-07-12 12:12:18.0 +0200
+++ aolserver4.templates2006-07-12 12:16:00.0 +0200
@@ -1,17 +1,7 @@
-Template: aolserver4/introduction
-Type: note
-_Description:  Welcome to the AOLserver 4.
- AOLserver is a multithreaded, Tcl-enabled, high-performance webserver.
- .
- This software is designed to run multiple domains on a single machine. 
- We will set up just one (main) right now. You can modify the configuration 
- file in /etc/aolserver4 and its init script yourself for more complicated 
- configurations.
-
 Template: aolserver4/hostname
 Type: string
 Default: localhost
-_Description:  Enter an hostname:
+_Description: Hostname of the server:
  The server needs an hostname to be exposed on redirect pages URL and for
  informative purposes to identify itself.
  .
@@ -22,10 +12,10 @@
 Template: aolserver4/address
 Type: string
 Default: 127.0.0.1
-_Description:  Enter an IP address number:
+_Description: IP address to listen to:
  The server needs at least an IP address to listen to.
  It is generally the primary Ethernet interface (or the loopback address,
- if you would to use the server just locally).
+ if you would like to use the server just locally).
  .
  The default address is the loopback one, which is not recommended
  for general (network or Internet) use.
@@ -33,11 +23,11 @@
 Template: aolserver4/port
 Type: string
 Default: 80
-_Description:  Enter a TCP port:
+_Description: TCP port:
  AOLserver needs a port number assigned for its use.  This is almost always
  port 80 (the standard HTTP port), but might be different if you have
  installed a second web server, or have some other service listening on
  this port.
  .
- It is recommended that you use the default.
- .
+ The default is recommanded.
+


signature.asc
Description: Digital signature

Bug#377657: NMU: convert rpm to the updated Python policy

Anand Kumria writes:
 Hi Matthias,
 
 Have you tested this with any software dependant on RPM or is this a
 mechanical conversion?
 
 I'm particularly concerned as alien, yum and a few other tools use rpm
 (and in the case of yum, the python interfaace) and as far as I knew
 this conversion would break things.

why should it break things? Of course package dependencies have to be
updated, if they are versioned.

  Matthias


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#376471: dsdo 1.4.52-1.1 NMU

2006-07-12 Thread Jonas Smedegaard

On Wed, 12 Jul 2006 11:03:13 +0200 Matej Vela wrote:

 I'm doing an NMU of dsdo to fix #376471; diff attached.

Thanks!


 - Jonas

-- 
* Jonas Smedegaard - idealist og Internet-arkitekt
* Tlf.: +45 40843136  Website: http://dr.jones.dk/

 - Enden er nær: http://www.shibumi.org/eoti.htm


pgpqR20IpU3F3.pgp
Description: PGP signature

Bug#377960: Message with no Package: tag cannot be processed! (little bug when doing a apt-get upgrade)

2006-07-12 Thread sestese

Package: libpaper1
Version: 1.1.9


while doing an apt-get upgrade i got the following message, which does
no block the process but i don't know if it affects the installation.

Setting up libpaper1 (1.1.19) ...readlink: invalid option -- eTry `readlink --help' for more information.
uname -a:Linux q1 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux

Bug#377965: cdbs calls dh_py* only for one binary package

Package: cdbs
Version: 0.4.44
Severity: serious

see python-numpy for an example; python-numpy-ext doesn't get the
correct dependencies and Python-Version.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377915: Can't change sample rate

2006-07-12 Thread geiger

On Tue, 11 Jul 2006, Flavio Henrique Araque Gurgel wrote:
 After clicking on start the server is aways started at 48000Hz.
 Changes in the setup window doesn't affect this.

Thats strange, changing samplerate works perfectly on my system.
There are several things you could do to help me find out what is
going wrong.

First, can you send me the output of the messages window, and the
file ~/.qt/qjackctl and ~/.jackdrc ?

You can also try to start jackd from the terminal:
jackd -d alsa -r 44100 and see if this works.

Thanks for your feedback,

Günter

Bug#377973: apsfilter: Obsolete transitional debconf template

Package: apsfilter
Severity: minor

Hi,

Your debconf template is needed for transitions from versions  6.0.0
while the version in woody is already 7.2.2-3. This template should
therefore be removed.

Cheers,

-- 
Thomas Huriaux


signature.asc
Description: Digital signature

Bug#302952: diff for 0.8.2-0.1 NMU

Package: bombardier
Version: 0.8.2
Severity: normal
Tags: patch

Hi,

Attached is the diff for my bombardier 0.8.2-0.1 NMU.

-- 
 .''`. Fuck your fascist beauty standards
: :' :   
`. `'   Proudly running unstable Debian GNU/Linux
  `- www.amayita.com  www.malapecora.com  www.chicasduras.com
diff -Nru /tmp/WJYENPRWo2/bombardier-0.8.2/debian/changelog 
/tmp/TwhAaVsR2a/bombardier-0.8.2/debian/changelog
--- /tmp/WJYENPRWo2/bombardier-0.8.2/debian/changelog   2002-04-14 
17:31:20.0 +0200
+++ /tmp/TwhAaVsR2a/bombardier-0.8.2/debian/changelog   2006-07-12 
13:02:22.0 +0200
@@ -1,3 +1,11 @@
+bombardier (0.8.2-0.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Get rid of the /usr/doc link in postinst (Closes: #359366). 
+  * Add Upstream Author to copyright file (Closes: #302952).
+
+ -- Amaya Rodrigo Sastre [EMAIL PROTECTED]  Wed, 12 Jul 2006 12:54:45 +0200
+
 bombardier (0.8.2) unstable; urgency=high
 
   * small typo fixes, because woody is near
diff -Nru /tmp/WJYENPRWo2/bombardier-0.8.2/debian/copyright 
/tmp/TwhAaVsR2a/bombardier-0.8.2/debian/copyright
--- /tmp/WJYENPRWo2/bombardier-0.8.2/debian/copyright   2001-08-23 
13:17:13.0 +0200
+++ /tmp/TwhAaVsR2a/bombardier-0.8.2/debian/copyright   2006-07-12 
13:00:25.0 +0200
@@ -3,9 +3,7 @@
 
 It was downloaded from http://www.atom.hu/~risko/bombardier/
 
-Upstream Author: RISKO Gergely [EMAIL PROTECTED]
-
-Copyright:
+Copyright: RISKO Gergely [EMAIL PROTECTED]
 
 This program is free software; you may redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff -Nru /tmp/WJYENPRWo2/bombardier-0.8.2/debian/postinst 
/tmp/TwhAaVsR2a/bombardier-0.8.2/debian/postinst
--- /tmp/WJYENPRWo2/bombardier-0.8.2/debian/postinst2001-06-19 
21:09:48.0 +0200
+++ /tmp/TwhAaVsR2a/bombardier-0.8.2/debian/postinst2006-07-12 
12:54:41.0 +0200
@@ -34,6 +34,11 @@
echo Deleting the non-FHS /var/lib/games/bombardier directory
rm -Rf /var/lib/games/bombardier
fi
+
+   if [ -d /usr/doc -a -h /usr/doc/PAQUETE -a -d 
/usr/share/doc/PAQUETE ]; then
+   rm -f /usr/doc/PAQUETE
+fi
+
 ;;
 
 abort-upgrade|abort-remove|abort-deconfigure)

Bug#359366: diff for 0.8.2.1 NMU

Package: bombardier
Version: 0.8.2
Severity: normal
Tags: patch

Hi,

Attached is the diff for my bombardier 0.8.2.1 NMU.

-- 
 .''`. Fuck your fascist beauty standards
: :' :   
`. `'   Proudly running unstable Debian GNU/Linux
  `- www.amayita.com  www.malapecora.com  www.chicasduras.com
diff -Nru /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/changelog 
/tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/changelog
--- /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/changelog   2002-04-14 
17:31:20.0 +0200
+++ /tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/changelog 2006-07-12 
13:11:48.0 +0200
@@ -1,3 +1,11 @@
+bombardier (0.8.2.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Get rid of the /usr/doc link in postinst (Closes: #359366). 
+  * Add Upstream Author to copyright file (Closes: #302952).
+
+ -- Amaya Rodrigo Sastre [EMAIL PROTECTED]  Wed, 12 Jul 2006 12:54:45 +0200
+
 bombardier (0.8.2) unstable; urgency=high
 
   * small typo fixes, because woody is near
@@ -76,6 +84,3 @@
 
  -- Gergely Risko [EMAIL PROTECTED]  Sat, 21 Oct 2000 23:43:00 +0200
 
-Local variables:
-mode: debian-changelog
-End:
diff -Nru /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/copyright 
/tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/copyright
--- /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/copyright   2001-08-23 
13:17:13.0 +0200
+++ /tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/copyright 2006-07-12 
13:00:25.0 +0200
@@ -3,9 +3,7 @@
 
 It was downloaded from http://www.atom.hu/~risko/bombardier/
 
-Upstream Author: RISKO Gergely [EMAIL PROTECTED]
-
-Copyright:
+Copyright: RISKO Gergely [EMAIL PROTECTED]
 
 This program is free software; you may redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
diff -Nru /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/postinst 
/tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/postinst
--- /tmp/xh0UvYFQj8/bombardier-0.8.2/debian/postinst2001-06-19 
21:09:48.0 +0200
+++ /tmp/sRmPWza5lN/bombardier-0.8.2.1/debian/postinst  2006-07-12 
12:54:41.0 +0200
@@ -34,6 +34,11 @@
echo Deleting the non-FHS /var/lib/games/bombardier directory
rm -Rf /var/lib/games/bombardier
fi
+
+   if [ -d /usr/doc -a -h /usr/doc/PAQUETE -a -d 
/usr/share/doc/PAQUETE ]; then
+   rm -f /usr/doc/PAQUETE
+fi
+
 ;;
 
 abort-upgrade|abort-remove|abort-deconfigure)

Bug#377968: mdadm: French debconf templates translation update

2006-07-12 Thread Florentin Duneau

Package: mdadm
Version: N/A
Severity: wishlist
Tags: patch l10n


Hi,

Please find attached the French debconf templates translation update,
proofread by the debian-l10n-french mailing list contributors.

This file should be put as fr.po in the appropriate place in
your package build tree.

Florentin Duneau


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)


fr.po.gz
Description: Binary data

Bug#377972: sid-daily and gtk-miniiso on a pismo notebook (powerpc) - some of general remarks

2006-07-12 Thread Holger Levsen

package: installation-reports

Hi,

on Saturday, July 1st, we also tested d-i on pismo notebook (also know as g3
firewire see
http://www.apple-history.com/body.php?page=gallerymodel=pg3sfirewireperforma=offsort=dateorder=ASC),

The 20060630mini.iso gui-started, crashed, looped. (The mouse pointer also had
a square background.)

The 20060701 from wouter builds gui-started and froze, with video=ofonly
looped (similar to the 20060630mini.iso)

The daily build from 2006-06-30 non-gtk worked, and had a blue background
during installation :)

In configure network all network devices were detected, the wireless one is
labeled as 802.x, so it's recognizable (as opposed to the non recognizable
firewire ethernet...) - and it was selected automatically as no cable was
connected, nice!

Interestingly only the left alt-key (with the need for also using the
fn-button) worked to switch the consoles..., but after the installation all
is normal, that is both alt-keys are fine for switching consoles and the
fn-key is not needed.

Another thing that strangely only happend once (we had to restart many times
as the battery was empty and the power supply flaky...): during configure
harddisc a menu for pcmcia options pops up. This is slightly confusing,
because though the machine has pcmcia, there were no pcmcia cards used (and
therefore also no pcmcia harddrives in the machine.)

Then we were not asked if we wanted to create a normal user.

Also I noted that I didnt have to select a kernel to be installed, nice. With
the miboot-floppies i need to select a kernel for the final system.

The german select mirror templates are translated inconsistently: einen
Netzwerkspiegel verwenden and Land the Debian-Archiv-Spiegelservers.
(Besides that I'm still unconvinced that Netzwerkspiegel and Spiegelserver
are useful translations...)

From popularity-contest question on (til the end IIRC) there were localisation
issues: the titles of the text-boxes were not translated, the content was.

The laptop-task was preselected, yay - nice!

The download-progress bar is very nice too, but unfortunatly there is no
cancel button. (Which sucks, when you select the desktop task and are not
aware how much you need to download for this and dont have that much time at
the moment...)

The rest of the installation went fine, the system booted into linux. (I plan
to repeat this test with a macos9 and another one with a macosx installation,
which should be kept, as well.)

But the system time was set incorrectly to January 1st, 1904.

I will visit him again in the end of July or beginning of August, to repeat
these tests. Then I will also make sure to send the report immediatly, to
remember some details (like the exact symptoms/errors with the gtk-image)
better.

regards,
Holger

processor : 0
cpu : 740/750
temperature : 43-45 C (uncalibrated)
clock : 500MHz
revision: 131.0 (pvr 0008 8300)
bogomips: 995.32
machine : PowerBook3,1
motherboard : PowerBook3,1 MacRISC2 MacRISC Power Macintosh
detected as : 70 (PowerBook Pismo)
pmac flags : 001f
L2 cache: 1024K unified
memory : 1024MB
pmac-generation : NewWorld

:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3
AGP 2x (rev 02)
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:1a.0 CardBus bridge: Texas Instruments PCI1211
0002:24:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:24:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth FireWire (rev
01)
0002:24:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM)
(rev 01)

I also have a complete copy of /var/log available.

pgpgEaBGDkHPG.pgp
Description: PGP signature

Bug#377581: tetex-base: Creating of missing formats failed with dpkg --configure started in /usr/bin

2006-07-12 Thread Florent Rougon

Frank Küster [EMAIL PROTECTED] wrote:

 What about creating a temporary directory under /tmp and working in it?

 That would certainly be feasible.  The question is whether this is worth
 the effort.  If someone comes up with a tested patch, I have no
 objections against applying it.

I'm working on it.

Note: the relevant code is in common.functions.in and therefore will
need to propagate to a lot of packages (tetex-base, -bin and -extra at
least IIRC) before the bug is really fixed.

-- 
Florent

Bug#377971: sid-daily and gtk-miniiso on a iMac G5 (powerpc)

2006-07-12 Thread Holger Levsen

package: installation-reports

Hi,

on Saturday, July 1st, I tested d-i on an iMac G5 
(http://www.apple-history.com/?page=gallerymodel=imac_g5performa=offsort=dateorder=ASC),
 
which has a PPC970FX cpu with 1.8 ghz. As the owner (he's a OSX fan...) 
didn't really want to install linux on it, we went for stopping at the 
partitioning step :-)

The gtk20060630mini.iso didn't had a install64 boot image, so it didnt boot.
Colin had daily build gtk images (also powerpc64 ones), it booted, but they 
endlessly looped with a directfb error message.

So we then booted the daily build netinst from 2006-06-30 cd image with 
install64. From the beginning the background screen was red, not blue. 

The module usbkbd not found at the end of boot.

The network detection found 2 ethernet interfaces (wired ethernet and 
firewire, wireless was not found (airport-extreme/bcm43xx only available in 
=2.6.17)), but there was no indication which interface is which. (If there 
is no bug for this already I would consider this as valuable to track and 
fix.) This is a usability issue.

Also the user was surprised that all drives were labeled as scsi in partman, 
while in reality they where sata (internal) and three external firewire.
Again, a usability issue - I guess this has been reported already?

There we stopped and rebooted. Surprisingly his custom boot logo (he replaced 
the apple image which shows up right after powering on with something else) 
was gone! I was (am still am) quite surprised about this data loss.


processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model   : 13
model name  : Intel(R) Pentium(R) M processor 1.70GHz
stepping: 6
cpu MHz : 600.000
cache size  : 2048 KB
fdiv_bug: no
hlt_bug : no
f00f_bug: no
coma_bug: no
fpu : yes
fpu_exception   : yes
cpuid level : 2
wp  : yes
flags   : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat 
clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips: 1198.05

:f0:0b.0 Host bridge: Apple Computer Inc. U3L AGP Bridge
:f0:10.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX 
Go5200] (rev a1)
0001:00:01.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:02.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:00:03.0 PCI bridge: Apple Computer Inc. Shasta PCI Bridge
0001:01:01.0 Network controller: Broadcom Corporation BCM4306 802.11b/g 
Wireless LAN Controller (rev 03)
0001:01:07.0 Class ff00: Apple Computer Inc. Shasta Mac I/O
0001:01:0b.0 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.1 USB Controller: NEC Corporation USB (rev 43)
0001:01:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
0001:02:0c.0 IDE interface: Broadcom K2 SATA
0001:02:0d.0 Class ff00: Apple Computer Inc. Shasta IDE
0001:02:0e.0 FireWire (IEEE 1394): Apple Computer Inc. Shasta Firewire
0001:03:0f.0 Ethernet controller: Apple Computer Inc. Shasta (Sun GEM)

dmesg, partman, report-hw and syslog are available upon request.


I will visit him again in the end of July or beginning of August, to repeat 
these tests. Then I will also make sure to send the report immediatly, to 
remember some details (like the exact symptoms/errors with the gtk-image) 
better.

regards,
Holger




pgpmNIMsjSNUo.pgp
Description: PGP signature

Bug#329449: diff for 1.0beta3-5.1 NMU

Package: avrp
Version: 1.0beta3-5
Severity: normal
Tags: patch

Hi,

Attached is the diff for my avrp 1.0beta3-5.1 NMU.

-- 
 .''`. Fuck your fascist beauty standards
: :' :   
`. `'   Proudly running unstable Debian GNU/Linux
  `- www.amayita.com  www.malapecora.com  www.chicasduras.com
diff -u avrp-1.0beta3/avrp.h avrp-1.0beta3/avrp.h
--- avrp-1.0beta3/avrp.h
+++ avrp-1.0beta3/avrp.h
@@ -41,7 +41,7 @@
 #define DEFFILENAME env:avrp.def
 #endif
 
-#if defined(__linux__) || defined(__FreeBSD__) || defined (__GNU__)
+#if defined(__linux__) || defined(__FreeBSD__) || defined (__GNU__) || 
defined(__GLIBC__)
 #if defined(DEBIAN)
 #define DEFFILENAME /etc/avrp.def
 #else
diff -u avrp-1.0beta3/debian/changelog avrp-1.0beta3/debian/changelog
--- avrp-1.0beta3/debian/changelog
+++ avrp-1.0beta3/debian/changelog
@@ -1,3 +1,12 @@
+avrp (1.0beta3-5.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * Applied patch by Aurelien Jarno [EMAIL PROTECTED] so that it does not
+FTBFS on GNU/kFreeBSD (Closes: #329449).
+  * Get rid of the /usr/doc/ link (Closes: #359365).
+
+ -- Amaya Rodrigo Sastre [EMAIL PROTECTED]  Wed, 12 Jul 2006 12:47:03 +0200
+
 avrp (1.0beta3-5) unstable; urgency=low
 
   * Apply patch to build on Hurd (closes: Bug#122160)
only in patch2:
unchanged:
--- avrp-1.0beta3.orig/debian/postinst
+++ avrp-1.0beta3/debian/postinst
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if [ $1 = configure ]; then
+if [ -d /usr/doc -a -h /usr/doc/PAQUETE -a -d /usr/share/doc/PAQUETE 
]; then
+rm -f /usr/doc/PAQUETE
+fi
+fi
+

Bug#377969: sun-java5: French debconf templates translation update

2006-07-12 Thread Florentin Duneau

Package: sun-java5
Version: N/A
Severity: wishlist
Tags: patch l10n

Hi,

Please find attached the French debconf templates translation update,
proofread by the debian-l10n-french mailing list contributors.

This file should be put as fr.po in the appropriate place in
your package build tree.

Florentin Duneau


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)


fr.po.gz
Description: Binary data

Bug#376525: libsndfile: FTBFS on GNU/kFreeBSD (due to unsatisfied Build-Depends on libasound2-dev)

2006-07-12 Thread Erik de Castro Lopo

Anand Kumria wrote:

 I specifically made the switch to using libasound as sndfile-programs
 did not work when using OSS (on Linux).

Thats not the full story.

The problem is that the OSS emulation in ALSA has an endian-ness
problem on PowerPC (and probably other BE systems). I've just looked
at this code again and maybe I can come up with a fix for it. If so,
I'll post the fix to bug #350807.

The real OSS on PowerPC works correctly, as does ALSA output using 
ALSA.

 If you could confirm that #350807 does NOT affect FreeBSD machines, then
 I can do this.

If FreeBSD uses real OSS then FreeBSD should be OK.

Erik
-- 
+---+
  Erik de Castro Lopo
+---+
I don't think any MS Exec will ever die of old age. Satan
doesn't need the competition.
-- Digital Wokan on LinuxToday.com


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377970: apache: Your debconf templates do not follow the developers-reference

Package: apache
Severity: minor
Tags: patch

Hi,

There are various problems with your debconf templates (see
http://www.debian.org/doc/developers-reference/ch-best-pkging-practices.en.html#s-bpp-config-mgmt).

Full patches are attached, the list of mistakes is:
* badly formatted prompt for multiselect and string templates
* Use of first person
* badly formatted title for note templates

Cheers,

-- 
Thomas Huriaux
--- apache-common.templates.orig2006-07-12 12:47:24.0 +0200
+++ apache-common.templates 2006-07-12 12:49:31.0 +0200
@@ -32,12 +32,12 @@
 Template: apache-shared/debconf-modules
 Type: multiselect
 Choices: ${choices}
-_Description: Please select the modules that ${flavour} will load
+_Description: Modules that ${flavour} will load:
 
 Template: apache-shared/restart
 Type: boolean
 Default: false
-_Description: Do you want me to restart ${flavour} now?
+_Description: Should ${flavour} be restarted now?
  Remember that in order to activate the new configuration
  ${flavour} has to be restarted. You can also restart ${flavour}
  manually executing /etc/init.d/${flavour} restart
--- apache-perl.templates.orig  2006-07-12 12:47:28.0 +0200
+++ apache-perl.templates   2006-07-12 12:51:59.0 +0200
@@ -1,6 +1,6 @@
 Template: apache-perl/upgrade-from-apache-conflict
 Type: note
-_Description: Apache-Perl needs to be reconfigured.
+_Description: Reconfiguration of Apache-Perl needed
  This version of apache-perl has been reorganized from the previously
  installed version; its configuration files have moved to /etc/apache-perl.
  .
@@ -8,7 +8,7 @@
 
 Template: apache-perl/old-pidfile-set
 Type: note
-_Description: Apache-Perl needs a separate PidFile from Apache.
+_Description: Separate PidFile from Apache needed by Apache-Perl
  The installed /etc/apache-perl/httpd.conf contains a reference to
  apache.pid.  Apache-Perl must have its own PidFile, which should be called
  /var/run/apache-perl.pid.  Apache-Perl will not start until this is
@@ -30,7 +30,7 @@
 Template: apache-perl/server-name
 Type: string
 Default: localhost
-_Description: Set the FQDN for apache-perl default server
+_Description: FQDN for apache-perl default server:
  If you do not know which is the FQDN (Fully Qualified
  Domain Name, Ex: www.debian.org) for this computer
  please ask your network administrator or otherwise set
@@ -40,12 +40,12 @@
 Template: apache-perl/server-admin
 Type: string
 Default: [EMAIL PROTECTED]
-_Description: Set the email address of the apache-perl administrator
+_Description: Email address of the apache-perl administrator:
 
 Template: apache-perl/document-root
 Type: string
 Default: /var/www
-_Description: Set the directory that will contain the web pages for 
apache-perl default server
+_Description: Directory that will contain the web pages for apache-perl 
default server:
  The default is set to /var/www according to the FHS.
  If you will use a non default setting the contents of
  /var/www will NOT be touched/moved.
@@ -53,7 +53,7 @@
 Template: apache-perl/server-port
 Type: string
 Default: 80
-_Description: Set the TCP port on which the apache-perl server will listen
+_Description: TCP port on which the apache-perl server will listen:
  If you have more than one server running on the same machine
  you might want to set them to listen on different ports, since
  otherwise one of them will not work.
--- apache-ssl.templates.orig   2006-07-12 12:47:18.0 +0200
+++ apache-ssl.templates2006-07-12 12:50:09.0 +0200
@@ -14,7 +14,7 @@
 Template: apache-ssl/server-name
 Type: string
 Default: localhost
-_Description: Set the FQDN for apache-ssl default server
+_Description: FQDN for apache-ssl default server:
  If you do not know which is the FQDN (Fully Qualified
  Domain Name, Ex: www.debian.org) for this computer
  please ask your network administrator or otherwise set
@@ -24,12 +24,12 @@
 Template: apache-ssl/server-admin
 Type: string
 Default: [EMAIL PROTECTED]
-_Description: Set the email address of the apache-ssl administrator
+_Description: Email address of the apache-ssl administrator:
 
 Template: apache-ssl/document-root
 Type: string
 Default: /var/www
-_Description: Set the directory that will contain the web pages for apache-ssl 
default server
+_Description: Directory that will contain the web pages for apache-ssl default 
server:
  The default is set to /var/www according to the FHS.
  If you will use a non default setting the contents of
  /var/www will NOT be touched/moved.
--- apache.templates.orig   2006-07-12 12:47:13.0 +0200
+++ apache.templates2006-07-12 12:48:39.0 +0200
@@ -14,7 +14,7 @@
 Template: apache/server-name
 Type: string
 Default: localhost
-_Description: Set the FQDN for apache default server
+_Description: FQDN for apache default server:
  If you do not know which is the FQDN (Fully Qualified
  Domain Name, Ex: www.debian.org) for this computer
  please ask your network

Bug#377984: xen-tools: a simple way to duplicate virtual machines

2006-07-12 Thread Clement Hermann (nodens)

Package: xen-tools
Version: 2.1-3
Severity: wishlist

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

I see that the xen-duplicate-image support is discontinued upstream.
However, it would be nice to be able to duplicate images easily (one can
copy the images or LVM and change the configuration, or archive an
existing image with tar and use the tar file option of
xen-create-image), but it means doing several steps for this operation.

xen-create-image with the appropriate option could verify that a machine
is stopped to prevent corruption, and use an existing image or lv as
source to create a new image with the correct networking configuration.

What do you think ?

Regards,

- -- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-xen-686
Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1)

Versions of packages xen-tools depends on:
ii  debootstrap   0.3.3  Bootstrap a basic Debian system
ii  libtext-template-perl 1.44-1.1   Text::Template perl module
ii  perl-modules  5.8.8-4Core Perl modules

Versions of packages xen-tools recommends:
pn  reiserfsprogs none (no description available)
pn  rpmstrap  none (no description available)
ii  xen-hypervisor-3.0-i386 [ 3.0.2+hg9697-1 The Xen Hypervisor for i386
ii  xfsprogs  2.7.16-1   Utilities for managing the XFS fil

- -- no debconf information

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.3 (GNU/Linux)

iD8DBQFEtOff0yQ2guvROZ0RAqahAKCd9OcJhc9hDMmJoXoeLjACFenjrgCgiXYi
IoXMr2FkfrusmXNijg+wlYA=
=OFAP
-END PGP SIGNATURE-


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#350807: Possible solution to this problem

2006-07-12 Thread Erik de Castro Lopo

Hi all,

Today's email re bug #376525 made me look at this bug again and do
a little research on the OSS ioctls. The following patch may fix the
issue.

Previously, I just set the bitwidth to 16 bits, without specifying
the endian-ness. My suspicion is that OSS and the ALSA behave slightly
differently when I just specify 16 bits.

To fix this issue, this patch, sets 16 bits with the endian-ness of
the host CPU.

I'll be testing this on my ancient banged up ibook as soon as I
get it up and running again. If anyone else wants to play with
this, please do.

Erik

--- examples/sndfile-play.c.old
+++ examples/sndfile-play.c
@@ -406,7 +406,7 @@
 
 static int
 linux_open_dsp_device (int channels, int srate)
-{  int fd, stereo, temp, error ;
+{  int fd, stereo, fmt, error ;
 
if ((fd = open (/dev/dsp, O_WRONLY, 0)) == -1 
(fd = open (/dev/sound/dsp, O_WRONLY, 0)) == -1)
@@ -426,11 +426,11 @@
exit (1) ;
} ;
 
-   temp = 16 ;
-   if ((error = ioctl (fd, SOUND_PCM_WRITE_BITS, temp)) != 0)
-   {   perror (linux_open_dsp_device : bitwidth ) ;
-   exit (1) ;
-   } ;
+   fmt = CPU_IS_BIG_ENDIAN ? AFMT_S16_BE : AFMT_S16_LE ;
+   if (ioctl (fd, SOUND_PCM_SETFMT, fmt))
+   {   perror (linux_open_dsp_device : set format ) ;
+   exit (1) ;
+   } ;
 
if ((error = ioctl (fd, SOUND_PCM_WRITE_CHANNELS, channels)) != 0)
{   perror (linux_open_dsp_device : channels ) ;





-- 
+---+
  Erik de Castro Lopo
+---+
It's not that perl programmers are idiots, it's that the
language rewards idiotic behavior in a way that no other
language or tool has ever done. --  Erik Naggum
-- 
+---+
  Erik de Castro Lopo
+---+
Attacks by Microsoft Chairman Bill Gates on the GNU General
Public License, under which much open source and free software is
distributed, have been driven by a fear that the GPL creates a
domain of software that Microsoft cannot privatize and control
   -- Richard Stallman


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377982: ieee80211-source: Does not build (kernel 2.6.17)

2006-07-12 Thread Michel Loos

Package: ieee80211-source
Version: 1.1.6-4
Severity: grave
Justification: renders package unusable


Does not build using modules-assistant, complaining about removing 
/usr/src/modules/ieee80211/dirver/net which is a directory

Using the Debian.README instructions (with the modification:
kernel-headers - linux-headers)

I got the attached errors (the sama as module-assistant)


-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-k7
Locale: LANG=pt_BR, LC_CTYPE=pt_BR (charmap=ISO-8859-1)

Versions of packages ieee80211-source depends on:
ii  debhelper 5.0.37.2   helper programs for debian/rules
ii  module-assistant  0.10.4 tool to make module package creati

ieee80211-source recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377943: tikiwiki: distributing Houndtime infringes copyright and violates policy 2.2.1

2006-07-12 Thread Marcus Better

tag 377943 pending
thanks

Filipus Klutiero wrote:
 lib/graph2/ARIALDB.TTF contains a font named Houndtime.

Thanks for the information. As this file doesn't seem to be used
anywhere in Tikiwiki, I will simply remove it, along with a lot of other
unused code, in the next release.

 Note that there's still a good job to do to get all the borrowed code
 properly acknowledged in debian/copyright.

I've included all copyright notices I could find, and checked for
obvious mistakes, but if you know any code that is borrowed and
suspicious then please let me know. Obviously I have to draw the line
somewhere and assume that upstream didn't just steal every line of code.

 There's also IMO a huge job to do to get the copyright on all the
borrowed images.

I'll talk to upstream about it. Do you have reasons to suspect that some
images are borrowed?

Marcus



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377531: openoffice.org-dev: unowinreg.dll should be included

2006-07-12 Thread Rene Engelhard

Hi,

Martin Kretzschmar wrote:
 Just trying to get around having to write the makefile patch ;-)

:)

 You could try with the extra -D_JNI_IMPLEMENTATION_ -Wl,--kill-at
 arguments. The kill-at might be interesting because without it,
 strings unowinreg.dll | grep RegOpenCurrentUser shows
 
 [EMAIL PROTECTED]
 
 and with --kill-at, the @12 was killed
 
 Java_com_sun_star_lib_loader_WinRegKey_winreg_1RegOpenCurrentUser

Thanks for the tip. Tried that:

i586-mingw32msvc-gcc -Wall -D_JNI_IMPLEMENTATION_ 
-I/usr/lib/jvm/java-gcj/include -shared -o unowinreg.dll unowinreg.c 
-Wl,--kill-at -lkernel32 -ladvapi32
i586-mingw32msvc-strip unowinreg.dll

Uploaded to http//zyklop.dyndns.org/~rene/unowinreg.dll since people.d.o
is down...
Kovacs, can you try it again please?

Regards,

Rene


signature.asc
Description: Digital signature

Bug#377971: sid-daily and gtk-miniiso on a iMac G5 (powerpc)

2006-07-12 Thread Holger Levsen

Hi,

On Wednesday 12 July 2006 13:03, Holger Levsen wrote:
 processor   : 0
 vendor_id   : GenuineIntel

is off course completly wrong. I guess my fingers were to fast and just typed 
cat /proc/cpuinfo instead of cat cpuinfo... :-/

processor   : 0
cpu : PPC970FX, altivec supported
clock   : 1800.00MHz
revision: 3.0 (pvr 003c 0300)

timebase: 
machine : PowerMac8,1
motherboard : PowerMac8,1 MacRISC4 Power Macintosh 
detected as : 338 (iMac G5)
pmac flags  : 
L2 cache: 512K unified
pmac-generation : NewWorld

is right.


Sorry,
Holger


pgp8Hzy9lVG1L.pgp
Description: PGP signature

Bug#377975: last-exit: Last Exit window shouldn't be resizable vertically

2006-07-12 Thread Tom Parker

Package: last-exit
Version: 1.0-1
Severity: wishlist
Tags: patch

Currently, the Last Exit window can be resized vertically. As the
widgets don't move around to use this space, the net result is a big
blank space. Therefore, I think that vertical resizing for the window
should be disabled.

I've attached a patch to fix this, by calculating the required window
height, and using SetGeometryHints() to force the window to always be
the required height. It currently recalculates every time the cover
image is changed, as I've noticed that some cover images appear to make
the window fractionally larger.

-- System Information:
Debian Release: testing/unstable
  APT prefers stable
  APT policy: (990, 'stable'), (103, 'testing'), (102, 'unstable'), (99, 
'experimental'), (97, 'dapper')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages last-exit depends on:
ii  gconf2 2.14.0-1  GNOME configuration database syste
ii  libatk1.0-01.11.4-2  The ATK accessibility toolkit
ii  libc6  2.3.6-15  GNU C Library: Shared libraries
ii  libcairo2  1.2.0-2   The Cairo 2D vector graphics libra
ii  libfontconfig1 2.3.2-7   generic font configuration library
ii  libgconf2-42.14.0-1  GNOME configuration database syste
ii  libgconf2.0-cil2.8.2-2   CLI binding for GConf 2.12
ii  libglade2.0-cil2.8.2-2   CLI binding for the Glade librarie
ii  libglib2.0-0   2.12.0-0  The GLib library of C routines
ii  libglib2.0-cil 2.8.2-2   CLI binding for the GLib utility l
ii  libgnome2.0-cil2.8.2-2   CLI binding for GNOME 2.12
ii  libgstreamer0.10-0 0.10.8-2  Core GStreamer libraries and eleme
ii  libgtk2.0-02.8.18-4  The GTK+ graphical user interface 
ii  libgtk2.0-cil  2.8.2-2   CLI binding for the GTK+ toolkit 2
ii  libmono-corlib1.0-cil  1.1.13.6-4Mono core library (1.0)
ii  libmono-system-web1.0-cil  1.1.13.6-4Mono System.Web library
ii  libmono-system1.0-cil  1.1.13.6-4Mono System libraries (1.0)
ii  libmono1.0-cil 1.1.13.6-4Mono libraries (1.0)
ii  liborbit2  1:2.14.0-2libraries for ORBit2 - a CORBA ORB
ii  libpango1.0-0  1.13.2-0  Layout and rendering of internatio
ii  libx11-6   2:1.0.0-7 X11 client-side library
ii  libxcursor11.1.5.2-5 X cursor management library
ii  libxext6   1:1.0.0-4 X11 miscellaneous extension librar
ii  libxfixes3 1:3.0.1.2-4   X11 miscellaneous 'fixes' extensio
ii  libxi6 1:1.0.0-5 X11 Input extension library
ii  libxinerama1   1:1.0.1-4 X11 Xinerama extension library
ii  libxml22.6.26.dfsg-1 GNOME XML library
ii  libxrandr2 2:1.1.0.2-4   X11 RandR extension library
ii  libxrender11:0.9.0.2-4   X Rendering Extension client libra
ii  mono-runtime   1.1.13.6-4Mono runtime

last-exit recommends no packages.

-- no debconf information
--- src/MagicCoverImage.cs.old	2006-07-12 13:11:58.0 +0200
+++ src/MagicCoverImage.cs	2006-07-12 13:16:18.0 +0200
@@ -30,6 +30,9 @@
 		private Pixbuf current;
 		private Pixbuf next;
 
+		public delegate void CoverImageChangedHandler (MagicCoverImage mci);
+		public event CoverImageChangedHandler CoverImageChanged;
+
 		private TimeSpan start;
 
 		const double FADE_DURATION = 1500.0;
@@ -47,6 +50,9 @@
 next = pb;
 start_fade ();
 			}
+			if (CoverImageChanged != null) {
+CoverImageChanged (this);
+			}
 		}
 
 		private void start_fade () {
--- src/PlayerWindow.cs.old	2006-07-10 18:51:36.0 +0200
+++ src/PlayerWindow.cs.notray	2006-07-12 13:22:29.0 +0200
@@ -182,6 +182,7 @@
 
 			cover_image = new MagicCoverImage ();
 			cover_image_container.Add (cover_image);
+			cover_image.CoverImageChanged += new MagicCoverImage.CoverImageChangedHandler(set_height_limit);
 			cover_image.Visible = true;
 
 			love_image = new Image ();
@@ -257,6 +258,19 @@
 			cover_image.ChangePixbuf (cover);
 		}
 		
+		private void set_height_limit(MagicCoverImage mci)
+		{
+			int height = 0;
+			int width = 0;
+			GetSize(out width, out height);
+			Gdk.Geometry limits = new Gdk.Geometry();
+			limits.MinHeight = height;
+			limits.MaxHeight = height;
+			limits.MinWidth = SizeRequest().Width;
+			limits.MaxWidth = Gdk.Screen.Default.Width;
+			SetGeometryHints(this,limits,Gdk.WindowHints.MaxSize|Gdk.WindowHints.MinSize);
+		}
+
 		private void add_station (Gdk.Pixbuf image,
 	  string name,
 	  string path,

Bug#374185: mkvmlinuz: syntax errors in script

2006-07-12 Thread Sven Luther

On Wed, Jul 12, 2006 at 09:50:53AM +0100, Colin Watson wrote:
 reopen 374185
 thanks
 
 On Sat, Jun 17, 2006 at 08:15:29PM +0200, Wouter Verhelst wrote:
  --- mkvmlinuz.orig  2006-06-17 20:03:05.0 +0200
  +++ /usr/sbin/mkvmlinuz 2006-06-17 20:13:40.0 +0200
  @@ -60,7 +60,7 @@
   esac
   
   # use non-option arguments as release version and kernel image file if 
  needed
  -shift $((OPTIND-1))
  +shift $(( $OPTIND - 1 ))
   if test -z $release -a -n $1; then
   release=$1
   fi
 
 This part of the report is still valid no matter whether you're using
 dash or bash. In bash, I get:
 
   /usr/sbin/mkvmlinuz: 61: arith: syntax error: OPTIND-1
 
 Please apply this part of Wouter's patch.

If you explain to me why i never saw this problem myself though.

That said, it is indeed logical to add spaces, and if so i don't understand
why it didn't work previously.

Friendly,

Sven Luther


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#360004: Processed: Re: Processed: Problem found

2006-07-12 Thread Tobias Richter

severity 360004 important
reassign 360004 hylafax-server
merge 377914 360004
thank you

Sorry for the minor confusion caused in the BTS. 
Next time I know how to do this better.


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377983: dansguardian-2.8.0.6-antivirus-6.3.8-1-1: Dansguardian crashes on etch.

2006-07-12 Thread Andrew N.

Package: dansguardian-2.8.0.6-antivirus-6.3.8-1-1
Version: dansguardian-2.8.0.6
Severity: critical
Justification: breaks the whole system

Dansguardian fills the /tmp partition within two days preventing the
server from functioning. The /tmp/dgvirus folder keeps increasing 
until the /tmp partition has no more space. My current /tmp partition
size is 361MB

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377857: occasional SIGSEGV in exim4 under heavy load

2006-07-12 Thread Chris Lightfoot

On Wed, Jul 12, 2006 at 12:42:57PM +0200, Marc Haber wrote:
 On Tue, Jul 11, 2006 at 06:19:38PM +0100, Chris Lightfoot wrote:
  Package: exim4-daemon-heavy
  Version: 4.50-8sarge2
 
 Can you try to reproduce this with a later exim version, like 4.62 on
 testing or unstable, or a backport on stable?

It also occurs with 4.62, built from the original source.

-- 
Chris Lightfoot
mySociety


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#377657: NMU: convert rpm to the updated Python policy