Bug#591290: Buffer I/O error on device sr0, logical block 0
Hi, On Tue, Aug 03, 2010 at 08:20:03AM +0200, Kay Sievers wrote: Maybe a not fixed udisks, called from udev rules: http://cgit.freedesktop.org/udisks/commit/?id=c2464f7bf215cd17962e917b974c573378d4e58b Udev should not cause this anymore. Doing udevadm test /class/block/sr0 should show what's actually called, and repeating the listed calls manually, should show in the log what's causing the messages. Thanks for your input. I did what you suggested; the log from runnig 'udevadm test /class/block/sr0' is attached to this e-mail. I see lots of the same errors in dmesg when I run this test (see below). I can do further tests if you tell me which calls I should run manually. As a side note, I could not find 80-udisks.rules on my installation. dmesg output: [124141.134419] Buffer I/O error on device sr0, logical block 0 [124141.134427] Buffer I/O error on device sr0, logical block 1 [124141.140916] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [124141.140927] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [124141.140937] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [124141.140950] sr 3:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [124141.140970] end_request: I/O error, dev sr0, sector 0 [124141.140979] Buffer I/O error on device sr0, logical block 0 [124141.140987] Buffer I/O error on device sr0, logical block 1 [124141.147374] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [124141.147384] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [124141.147395] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [124141.147408] sr 3:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [124141.147428] end_request: I/O error, dev sr0, sector 0 ... -- Stanislav run_command: calling: test udevadm_test: version 160 parse_file: reading '/etc/udev/rules.d/025_libgphoto2.rules' as rules file parse_file: reading '/lib/udev/rules.d/45-libmtp8.rules' as rules file parse_file: reading '/lib/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/lib/udev/rules.d/55-dm.rules' as rules file add_rule: NAME= is ignored, because udev will not delete any device nodes, please remove it from /lib/udev/rules.d/55-dm.rules:57 parse_file: reading '/lib/udev/rules.d/60-fuse-utils.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-gnupg.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-i2c-tools.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-ifplugd.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-libsane-extras.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-libsane.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-nvidia-kernel-common.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-serial.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-dm.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-persistent-v4l.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-qemu-system.rules' as rules file parse_file: reading '/lib/udev/rules.d/60-virtualbox-ose-modules-2.6.32-5-686.rules' as rules file parse_file: reading '/dev/.udev/rules.d/61-dev-root-link.rules' as rules file parse_file: reading '/lib/udev/rules.d/61-mobile-action.rules' as rules file parse_file: reading '/lib/udev/rules.d/62-bluez-hid2hci.rules' as rules file parse_file: reading '/lib/udev/rules.d/64-xorg-xkb.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-acl.rules' as rules file parse_file: reading '/lib/udev/rules.d/70-hid2hci.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-net-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-probe_mtd.rules' as rules file parse_file: reading '/lib/udev/rules.d/75-tty-description.rules' as rules file parse_file: reading '/lib/udev/rules.d/78-sound-card.rules' as rules file parse_file: reading '/lib/udev/rules.d/79-fstab_import.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-alsa.rules' as rules file parse_file: reading '/lib/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/lib/udev/rules.d/85-hwclock.rules' as rules file parse_file: reading '/etc/udev/rules.d/85-pcmcia.rules' as rules file parse_file: reading
Bug#592306: debian-i18n: Upstream source translation information seems to lack Java support
Package: debian-i18n Severity: normal Hi, you are providing data about translations in upstream source at http://i18n.debian.net/material/data/ and I plan to integrate this data into UDD. By chance I had a look into the package geogebra I noticed that it contains translation files named geogebra/properties/command_LANG.properties which should be included as well into the data provided above because this seems to be the Java way to provide translations. Kind regards and thanks for providing the data for upstream translations Andreas. -- System Information: Debian Release: squeeze/sid APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.18-xenU (SMP w/1 CPU core) Locale: lang=de...@euro, lc_ctype=de...@euro (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#585796: #585796: local-debbugs: Cannot search
On Sun, 08 Aug 2010, Jonathan Nieder wrote: Don Armstrong wrote: * Various changes to make debbugs-local work better (Closes: #585796) That does help a lot. Now I’ve tried: echo src:git ~/.debbugs/bugs_to_get local-debbugs -M local-debbugs --daemon --no-detach and in another VT: w3m http://localhost:8080/542709 The resulting output from the daemon: configuration file '/etc/debbugs/config' doesn't exist; skipping itUnable to locate template /usr/share/debbugs/templates/en_US/cgi/no_such_bug.tmpl Unable to find template cgi/no_such_bug with language en_US at /usr/share/perl5/Debbugs/Text.pm line 154. If I instead try local-debbugs --show 542709 then I still get “error reading from socket” from the browser, but this way there is no new output from the local-debbugs daemon. Will investigate more. Thanks. Yeah; the problem is that I've been kind of naïve, and have been testing this on a system which also has a fully working debbugs install, so I missed this whole class of problem. I'm going to be testing it on the plane, and possibly by the time you read this message I will have a patch which works, and will upload a new version. Don Armstrong -- There are two major products that come out of Berkeley: LSD and UNIX. We don't believe this to be a coincidence. -- Jeremy S. Anderson http://www.donarmstrong.com http://rzlab.ucr.edu -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592117: debbugsconfig fails due to missing /etc/debbugs/indices/ directory
On Sat, 07 Aug 2010, John Lightsey wrote: Hi there, I rebuilt the packages from experimental on my testing system, but it looks like this problem may exist in previous versions as well. We doing a fresh install of debbugs and running debbugsconfig for the first time, it dies while trying to copy the /usr/share/doc/debbugs/examples/sources file to /etc/debbugs/indices/ since that directory does not exist. This stops debbugsconfig from running to completion. debbugsconfig needs some serious love, because it isn't completely necessary anymore, and is generating configuration files with options that are obsolete or not strictly necessary. I personally don't use it at all, and would love to see a patch that replaced it with a command which created a local mirror of the bts or similar. [I'm only still distributing it because I assumed it has some users, even though I don't use it.] Don Armstrong -- If you find it impossible to believe that the universe didn't have a creator, why don't you find it impossible that your creator didn't have one either? -- Anonymous Coward http://slashdot.org/comments.pl?sid=167556cid=13970629 http://www.donarmstrong.com http://rzlab.ucr.edu -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#588593: broken mobile-broadband
Hi Since I upgraded to NM 0.8.0.999 my Huawei was working again with MM 0.4. I wanted to wait with a response until NM 8.1 arrived in testing to confirm that it is working again. Now, finally 0.8.1 arrived in testing I can say MM 0.4 is working with NM 0.8.0.999 but NOT with NM 0.8.1 :-( With MM 0.4 and NM 0.8.1 I always get a timeout (with Huawei K3520 and with Nokia E72): --- Aug 9 07:24:01 ben NetworkManager[4813]: info Activation (ttyACM0) starting connection 'surfo2' Aug 9 07:24:01 ben NetworkManager[4813]: info (ttyACM0): device state change: 3 - 4 (reason 0) Aug 9 07:24:01 ben NetworkManager[4813]: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) scheduled... Aug 9 07:24:01 ben NetworkManager[4813]: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) started... Aug 9 07:24:01 ben NetworkManager[4813]: info Activation (ttyACM0) Stage 1 of 5 (Device Prepare) complete. Aug 9 07:24:23 ben NetworkManager[4813]: warn GSM connection failed: (32) Serial command timed out Aug 9 07:24:23 ben NetworkManager[4813]: info (ttyACM0): device state change: 4 - 9 (reason 1) Aug 9 07:24:23 ben NetworkManager[4813]: info Marking connection 'surfo2' invalid. Aug 9 07:24:23 ben NetworkManager[4813]: warn Activation (ttyACM0) failed. Aug 9 07:24:23 ben NetworkManager[4813]: info (ttyACM0): device state change: 9 - 3 (reason 0) Aug 9 07:24:23 ben NetworkManager[4813]: info (ttyACM0): deactivating device (reason: 0). --- After a downgrade of network-manager, libnm-glib-vpn1, libnm-glib2 and libnm-util1 to 0.8.0.999 I can connect fine again (with MM 0.4, Huawei 3520 and Nokia E72 via USB)! Are there any logs/informations needed to track the problem down? @Miche You can get all versions for all debian-packages from snapshot.debian.org. For example: http://snapshot.debian.org/archive/debian/20100701T034005Z/pool/main/m/modemmanager/modemmanager_0.3-2_i386.deb Thanks for this link! Achim -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591723: Popup comes up asking the PIN that was already specified using the gnome nm-applet
I can confirm this! When connecting my Huawei 3520 I always have to enter the PIN (again). Which is annoying. Also as the textfield is not a passwordfield everybody can see the PIN which is entered, this should not happen! What informations/logs are needed to track the problem down? best regards Achim -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592307: linux-image-2.6.32-5: Laptop-Display flicker after a short time
Package: linux-2.6 Version: 2.6.32-18 Severity: important File: linux-image-2.6.32-5 After the grub window I see a few lines and then the display flicker. I do not have this problem with linux-image-2.6.32-3 -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Hewlett-Packard product_name: HP EliteBook 8440p product_version: chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: 68CCU Ver. F.05 board_vendor: Hewlett-Packard board_name: 172B board_version: KBC Version 30.29 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 12) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort+ SERR- PERR- INTx- Latency: 0 Capabilities: access denied 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 5000-5fff Memory behind bridge: d200-d30f Prefetchable memory behind bridge: c000-d1ff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: access denied Kernel driver in use: pcieport 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d7428000 (64-bit, non-prefetchable) [size=16] Capabilities: access denied 00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550]) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 6050 [size=8] Region 1: Memory at d7426000 (32-bit, non-prefetchable) [size=4K] Capabilities: access denied Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at d740 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d7425000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 6020 [size=32] Capabilities: access denied Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d7427c00 (32-bit, non-prefetchable) [size=1K] Capabilities: access denied Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:172b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- MAbort- SERR- PERR- INTx- Latency:
Bug#592308: reportbug (gtk) crashes after select package and press continue
Package: reportbug Version: 4.12.4 Severity: important I select the linux-image-2.6.32-5 package and press continue. After that it crashed. I got this information in dmesg [ 93.851278] python[3784]: segfault at 0 ip (null) sp 7fffe77ee198 error 14 in python2.6[40+21d000] [ 97.926196] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 367.962620] reportbug[4215]: segfault at 7c ip 7fa7594f6472 sp 7fa753329c70 error 4 in libpango-1.0.so.0.2800.1[7fa7594d2000+49000] [ 406.940905] reportbug[4233]: segfault at 7c ip 7fb99d5f3472 sp 7fb997426c70 error 4 in libpango-1.0.so.0.2800.1[7fb99d5cf000+49000] -- Package-specific info: ** Environment settings: INTERFACE=text ** /srv/home/michael/.reportbugrc: reportbug_version 4.12.4 mode novice ui text -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (750, 'testing'), (700, 'unstable'), (600, 'stable'), (500, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages reportbug depends on: ii apt 0.7.25.3 Advanced front-end for dpkg ii python2.6.5-11 interactive high-level object-orie ii python-reportbug 4.12.4 Python modules for interacting wit reportbug recommends no packages. Versions of packages reportbug suggests: pn debconf-utilsnone (no description available) pn debsums none (no description available) pn dlocate none (no description available) pn emacs22-bin-common | none (no description available) ii file 5.04-4 Determines file type using magic ii gnupg1.4.10-4GNU privacy guard - a free PGP rep ii postfix [mail-transp 2.7.1-1 High-performance mail transport ag ii python-gtk2 2.17.0-3Python bindings for the GTK+ widge pn python-gtkspell none (no description available) pn python-urwid none (no description available) ii python-vte 1:0.24.3-1 Python bindings for the VTE widget ii xdg-utils1.0.2+cvs20100307-1 desktop integration utilities from -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592014:
Hi! It seems to be an Python problem. I got this messages in dmesg: [ 1461.575876] python[4963]: segfault at 0 ip (null) sp 7951fad8 error 14 in python2.6[40+21d000] CU Michael -- ,''`. : :' : Michael Ott `. `'e-mail: michael at king-coder dot de `- signature.asc Description: This is a digitally signed message part
Bug#592309: netbase: system waits for wired cable after yesterday's updates
Package: netbase Version: 4.42 Severity: important System doesn't boot if wired cable is off. Boot continues as soon as I connect the cable to A-link router. I'll attach a screenshot in next message -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages netbase depends on: ii initscripts 2.88dsf-11 scripts for initializing and shutt ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip Versions of packages netbase recommends: ii ifupdown 0.6.10 high level tools to configure netw netbase suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592310: arpon: Arpon daemon won't start
Package: arpon Version: 2.0-1 Severity: grave Justification: renders package unusable While starting arpon daemon following error occures: Starting anti ARP poisoning daemon : arpon /usr/sbin/arpon: option requires an argument -- 'y' -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to pl_PL.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages arpon depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libdumbnet1 1.12-3+b1 A dumb, portable networking librar ii libnet1 1.1.4-2library for the construction and h ii libpcap0.81.1.1-2system interface for user-level pa ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip arpon recommends no packages. arpon suggests no packages. -- Configuration Files: /etc/default/arpon changed: DAEMON_OPTS=-d -f /var/log/arpon/arpon.log -g -y RUN=yes -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#561944: [Debian GNUstep maintainers] Bug#561944: GNUstep transition
Hi Yavor, 2010/8/8 Yavor Doganov ya...@gnu.org: [...] The fix for #581934 (gnustep-dl2) depends on -base/-gui versions from experimental, plus a fixed gorm.app. I don't know how the maintainer is planning to deal with it, I hope he's waiting for a fixed gorm.app + Debian-specific soname because of the ABI break. Federico? Yes, when all the required packages will be ready i'll try, probably with a little help from your side :), to fix any remaining issues. (I withdraw part of what I said in the bug log: a snapshot of upstream's repository ought to be out of question now, given that in the past few months it has been rewritten from scratch...) In any case, gorm.app and gnustep-dl2 are one of the few packages that will definitely require sourceful uploads. Then, should we suggest upstream to introduce the distro-specific soname or should we try to modify it by ourselves? Cheers, Federico -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591483: NM does not work with dun-connections after update
Hi I can confirm this problem. Since upgrade to network-manager 0.8.0.999-1 it is no more possible to connect a Modem (in my case Nokia E72) via bluetooth/Blueman. In Blueman the modem seems to be connected but it doesn't show up in the NM-Applet to dial. Network-manager ignores the modem: --- Aug 9 08:24:51 ben bluetoothd[1652]: link_key_request (sba=00:19:7D:EB:4A:80, dba=C0:38:F9:86:C9:D2) Aug 9 08:24:55 ben modem-manager: (tty/rfcomm0): could not get port's parent device Aug 9 08:24:55 ben modem-manager: (rfcomm0) opening serial device... Aug 9 08:24:55 ben modem-manager: (rfcomm0): probe requested by plugin 'Generic' Aug 9 08:24:56 ben modem-manager: (rfcomm0) closing serial device... Aug 9 08:24:56 ben modem-manager: (rfcomm0) opening serial device... Aug 9 08:24:56 ben modem-manager: (Generic): GSM modem /sys/devices/pci:00/:00:1d.3/usb5/5-1 claimed port rfcomm0 Aug 9 08:24:56 ben modem-manager: Added modem /sys/devices/pci:00/:00:1d.3/usb5/5-1 Aug 9 08:24:56 ben modem-manager: (tty/rfcomm0): outstanding support task prevents export of /sys/devices/pci:00/:00:1d.3/usb5/5-1 Aug 9 08:24:56 ben modem-manager: Exported modem /sys/devices/pci:00/:00:1d.3/usb5/5-1 as /org/freedesktop/ModemManager/Modems/2 Aug 9 08:24:56 ben modem-manager: (/org/freedesktop/ModemManager/Modems/2): data port is rfcomm0 Aug 9 08:24:56 ben NetworkManager[1482]: info ignoring modem 'rfcomm0' (no associated Bluetooth device) Aug 9 08:24:56 ben modem-manager: Modem /org/freedesktop/ModemManager/Modems/2: Equipment identifier set (355239032454295) Aug 9 08:24:56 ben modem-manager: (rfcomm0) closing serial device... --- With NM 0.8 this was working. What informations/logs are needed to track this down? best regards Achim -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592309: netbase: system waits for wired cable after yesterday's updates
I'm not sure if this is right package because netbase was not updated yestarday. If not, please forward to right address. But something has changed in network settings. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592128: Please support building from remote git:// url
On Sat, Aug 07, 2010 at 01:38:27PM -0400, Reinhard Tartler wrote: Package: git-buildpackage Version: 0.4.65 Severity: wishlist It would be great if the following command (or similar) would just work: $ git-buildpackage --git-branch=sid git://git.debian.org/pkg-multimedia/vlc.git -S This makes sense. We don't even need an extra parameter --git-branch since we can simply use what's there for branch naming. I'd simply add a --git-clone-from option: $ git-buildpackage --git-debian-branch=sid --git-upstream-branch=upstream --git-clone=git://git.debian.org/pkg-multimedia/vlc.git -S We can then simply invoke gbp-pull with these options from within git-buildpackage: gbp-pull --debian-branch=sid --upstream-branch=upstream git://git.debian.org/pkg-multimedia/vlc.git I'll have to finish some other things first before looking at it so patches are (as always) welcome. Cheers, -- Guido -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592311: ITP: spectacle -- RPM Spec file generator and management tool
Package: wnpp Severity: wishlist Owner: Fathi Boudra f...@debian.org * Package name: spectacle Version : 0.18 Upstream Author : Intel Corporation * URL : http://meego.gitorious.org/meego-developer-tools/spectacle * License : GPL-2 Programming Lang: Python Description : RPM Spec file generator and management tool Spectacle is a tool for managing and creating RPM spec files. It includes the tool to generate spec files from metadata file in YAML format, and tools to convert spec files or spec-builder's ini files to YAML format. For spectacle managed packages, all generic packaging information will be stored in the YAML file, and it also allows maintaining customizations in the spec file directly with special enclosure tags. The following tools are installed: * specify the tool to generate or to update spec file, based on YAML * ini2spectacle the tool to convert spec-builder .ini to YAML and new spec file * spec2spectacle the tool to convert original spec to YAML and new spec file -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592266: Debian mirrors: debian.mirror.root.lu FTP broken !
Hello, we have reconfigured the FTP Server. We have just to wait for the DNS to deploy the changes. After this, the registered configuration will work again. Please disregard the request for the mirror change we've sent through the webinterface yesterday. Best regards. Mike WEIMICHKIRCH root S.A. 35, rue John F. Kennedy L-7327 Steinsel Tel.: +352 20 500 Fax: +352 20 500-500 E-Mail:�...@root.lu Web: http://www.root.lu -Original Message- From: Simon Paillard [mailto:spaill...@debian.org] Sent: Sonntag, 8. August 2010 22:08 To: Mike Weimichkirch | root S.A.; 592...@bugs.debian.org Subject: Re: Debian mirrors: debian.mirror.root.lu FTP broken ! Hi, On Sun, Aug 08, 2010 at 01:19:08PM +0200, Simon Paillard wrote: On Sat, Aug 07, 2010 at 09:53:07PM +0200, Mike Weimichkirch | root S.A. wrote: Hello Simon, we can't see any problem on our mirror server. FTP is running fine. Do you have a specific folder where the error occurs? As submitted by you, the archive is supposed to be available at ftp://debian.mirror.root.lu/debian/ (NOT OK), while in FTP it's now: ftp://debian.mirror.root.lu/debian/debian/ and ftp://debian.mirror.root.lu/debian/debian-cd/ Please make sure that for all protocols registered, you setup still match the record below, thanks ! Please adjust your FTP daemon setup, we cannot ask Debian users to change their APT setup. Moreover, for consistency purpose, we prefer to have the archive at /debian/ for all protocols, and same for /debian-cd/. Thanks in advance. Site: debian.mirror.root.lu Type: leaf Archive-architecture: alpha amd64 arm armel hppa hurd-i386 i386 ia64 kfreebsd-i386 kfreebsd-amd64 mips mipsel powerpc s390 sparc Archive-ftp: /debian/ Archive-http: /debian/ Archive-rsync: debian/ Archive-upstream: ftp.de.debian.org CDImage-ftp: /debian-cd/ CDImage-http: /debian-cd/ CDImage-rsync: debian-cd/ CDImage-upstream: ftp.de.debian.org IPv6: yes Maintainer: root S.A. i...@root.lu Country: LU Luxembourg Location: Steinsel Sponsor: root S.A. http://www.root.lu/ Comment: 1Gbps -- Simon Paillard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592187: Bug#576838: virtio network crashes again
Hi Ben, Am Sonntag, den 08.08.2010, 03:36 +0100 schrieb Ben Hutchings: This is not the same bug as was originally reported, which is that virtio_net failed to retry refilling its RX buffer ring. That is definitely fixed. So I'm treating this as a new bug report, #592187. Okay, thanks. I think you need to give your guests more memory. They all have between 512M and 2G - and it happens to all of them using virtio_net, and none of them using rtl8139 as a network driver, reproducibly. The RTL8139 hardware uses a single fixed RX DMA buffer. The virtio 'hardware' allows the host to write into RX buffers anywhere in guest memory. This results in very different allocation patterns. Please try specifying 'e1000' hardware, i.e. an Intel gigabit controller. I think the e1000 driver will have a similar allocation pattern to virtio_net, so you can see whether it also triggers allocation failures and a network stall in the guest. Also, please test Linux 2.6.35 in the guest. This is packaged in the 'experimental' suite. I'll rig up a test machine (the crashes all occured on production guests, unfortunatly) and report back. [...] If it would be an OOM situation, wouldn't the OOM-killer be supposed to kick in? [...] The log you sent shows failure to allocate memory in an 'atomic' context where there is no opportunity to wait for pages to be swapped out. The OOM killer isn't triggered until the system is running out of memory despite swapping out pages. Ah, good to know, thanks! Also, I note that following the failure of virtio_net to refill its RX buffer ring, I see failures to allocate buffers for sending TCP ACKs. So the guest drops the ACKs, and that TCP connection will stall temporarily (until the peer re-sends the unacknowledged packets). I also see 'nfs: server fileserver.backup.TechFak.Uni-Bielefeld.DE not responding, still trying'. This suggests that the allocation failure in virtio_net has resulted in dropping packets from the NFS server. And it just makes matters worse as it becomes impossible to free memory by flushing out buffers over NFS! This sounds quite bad. This problem *seems* to be fixed by 2.6.32-19: we upgraded to that on a different machine for host and guests, and an rsync of ~1TiB of data didn't produce any page allocation failures using virtio. But I'd wait for my tests with rsync/nfs and 2.6.32-18+e1000, 2.6.32-18+virtio 2.6.32-19+virtio and 2.6.35+virtio to conclude that. Thanks for taking your time to explain things! -- Lukas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592312: roundcube: Version 0.4 is available, please package
Package: roundcube Version: 0.3.1-3~bpo50+1 Severity: wishlist Roundcube 0.4 has been released today. Please make a package. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592313: [INTL:ast] Asturian grub2 updated translation
Package: grub2 Version: N/A Severity: wishlist Tags: l10n patch Please find attached the Asturian update translation of the grub2 package. Thanks very much! grub_debian_po_ast.po.gz Description: GNU Zip compressed data
Bug#592314: ITP: meego-packaging-tools -- MeeGo packaging tools
Package: wnpp Severity: wishlist Owner: Fathi Boudra f...@debian.org * Package name: meego-packaging-tools Version : 0.5.1 Upstream Author : Intel Corp. * URL : http://repo.meego.com/MeeGo/builds/trunk/ * License : LGPL-2.1 Programming Lang: Python and shell script Description : MeeGo packaging tools MeeGo packaging tools is a collection of utilities to setup packaging and build environment for MeeGo development. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591934: qemu-system: PXE boot unstable using etherboot
06.08.2010 19:26, Vagrant Cascadian пишет: Package: qemu-system Version: 0.12.5+dfsg-1 Severity: important qemu 0.12.x isn't working well with with etherboot, at least for me. Ditto for qemu-kvm, see it seems to probe the NIC twice, and on the second time, it seems to at least partially work, able to load pxelinux over the network. (this aspect of the problem seems identical to http://bugs.debian.org/585170) but then, after loading pxelinux, it seems to sometimes hang qemu (screen goes black, unable to switch to qemu monitor), and if it doesn't, it takes very long to boot. if it does boot, sometimes the network card stops working, hanging the root filesystem with nfsroot. upstream has switched to gPXE, which has not yet been uploaded to debian, as there are some outstanding licensing issues. http://bugs.debian.org/474034 live well, vagrant ___ pkg-qemu-devel mailing list pkg-qemu-de...@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/pkg-qemu-devel -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591397: Iceweasel produces error popups before starting and runs incredibly slowly
On Sun, Aug 08, 2010 at 12:25:35PM +0100, Richard Kettlewell wrote: On 08/08/2010 08:25, Mike Hommey wrote: Could you attach a full strace output for iceweasel ? Attached. Command was strace -r -q -o trace -f iceweasel. I think the whole problem is due to this: 10037 0.75 mkdir(/home/richard/.dbus, 0700) = -1 EEXIST (File exists) 10037 0.61 mkdir(/home/richard/.dbus/session-bus, 0700) = -1 EACCES (Permission denied) 10037 0.000198 write(2, Unable to create /home/richard/, 49) = 49 10037 0.82 open(/home/richard/.dbus/session-bus/620e4e5789a46d4838ff0b004746dfa0-10, O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 EACCES (Permission denied) Arguably, it shouldn't have such a startup impact, but that would be a problem with how dbus operates, imho. Can you check the permissions in these directories, fix them, and see if it works better? If so, we'll reassign to dbus. Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#580160: groovy: stargGroovy can't find javac
Hi, Am 08.08.2010 21:33, schrieb Ludovic Claude: Yes, we should replace the upstream statrGroovy script with something that works only on Debian, it will be easier to maintain I do not mind getting a new start script but please target such uploads to the experimental suite because Debian is frozen now. Cheers, Torsten -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591934: qemu-system: PXE boot unstable using etherboot
06.08.2010 19:26, Vagrant Cascadian wrote: Package: qemu-system Version: 0.12.5+dfsg-1 Severity: important qemu 0.12.x isn't working well with with etherboot, at least for me. Ditto for qemu-kvm, see #585170 . I asked on qemu-deve list (and someone CC'd etherboot), but no answer come from that direction except of switching to discussing gpxe licensing again... /mjt -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592315: firefox/chromium fails with libnss3-1d from unstable
Package: libnss3-1d Version: 3.12.7-1 Severity: normal Tags: sid This fails on chromium and firefox on certain https sites. e.g. going to https://www.citylink.com.au gives error --- This webpage is not available. The webpage at https://www.citylink.com.au/ might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 2 (net::ERR_FAILED): Unknown error. --- The site also fails in iceweasel with error --- Secure Connection Failed An error occurred during a connection to www.citylink.com.au. SSL received a malformed Server Key Exchange handshake message. (Error code: ssl_error_rx_malformed_server_key_exch) * The page you are trying to view can not be shown because the authenticity of the received data could not be verified. * Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. --- Installing back version 3.12.6-3 makes things work again. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592316: emacs23-bin-common: please register emacsclient as editor
Package: emacs23-bin-common Version: 23.2+1-2.1 Severity: wishlist Tags: patch Attach: /usr/local/share/applications/emacsclient.desktop Please register emacslient as an editor in /usr/share/applications/. As a comparison point, package gnuserv registers gnuclient there. I attach a works for me /usr(/local)/share/applications/emacsclient.desktop, derived from the one in package gnuserv. You'll probably want to replace bin/emacsclient by bin/emacsclient.emacs23 in the package. -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (500, 'stable'), (400, 'testing'), (300, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_LU.UTF-8, LC_CTYPE=fr_LU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages emacs23-bin-common depends on: ii emacs23-common23.2+1-2.1 The GNU Emacs editor's shared, arc ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii liblockfile1 1.08-3 NFS-safe locking library, includes emacs23-bin-common recommends no packages. emacs23-bin-common suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592078: [Lynx-dev] Re: Bug#592078: lynx-cur: system's language setting seems ignored
On Mon, 9 Aug 2010, Atsuhito Kohda wrote: Hi Thomas, On Sun, 8 Aug 2010 10:13:12 -0400 (EDT), Thomas Dickey wrote: On Sat, 7 Aug 2010, Sebastien Hinderer wrote: Package: lynx-cur Version: 2.8.8dev.4-2 Severity: important Although locales are configured in french, lynx prints itsmessages inenglish hereas other programs continue to work normally. The problem that I see is that lynx-cur's message files are not installed. Looking further, I see that the problem is a typo left from my removal of mkinstalldirs.sh in dev.4 Here's a diff of the fix for that: I just uploaded a fixed version. Thanks for your kind help. thanks (I've been distracted with mawk recently, expect to switch back to lynx after dealing with mawk...) -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503679: mirror listing update for russell.cs.bilgi.edu.tr, push setup from ftp.tr
Yes, the pushes are working. 2010/8/8 Simon Paillard simon.paill...@resel.enst-bretagne.fr Hi you two, On Wed, Apr 22, 2009 at 09:14:17PM +0200, Simon Paillard wrote: On Tue, Apr 21, 2009 at 09:50:53PM +0300, onur güngör wrote: I set the mainstream server as ftp.tr.debian.org does not have a public ssh key. Is this acceptable or should I contact them? Levent, could you please send the public ssh key of the user that will perform the push to onur ? See http://debian.org/mirror/push_mirroring for details The timestamps seem to say the push is setup, can you confirm ? -- Simon Paillard
Bug#592317: developers-reference: Document the communication channels and what's expected from DD in terms of communication/marketing
Package: developers-reference Version: 3.4.3 Severity: wishlist In the publicity Bof at debconf, we agreed that we need to better communicate to DD the various communication channels that are available and the way that they are expected to use them. Among important things: - we want to make sure that people use d-d-a only for stuff relevant to developers only, other announces or press-releases ought to be sent to debian-news or debian-announce via the press team - we want developers to use wiki.debian.org/DeveloperNews if they have stuff that's not worth a single mail to d-d-a - we want contributors to suggest entries for the Debian Project News by sending mails to debian-publicity - we want people to coordinate announces/press releases with debian-public...@l.d.o or pr...@debian.org (only for announces that should not leak via the ML) - we want DD to know that they can help because they have commit rights to the DPN svn repository Maybe people from debian-publicity have other items to suggest. Cheers, -- Raphaël Hertzog ◈ Debian Developer ◈ [Flattr=20693] Follow my Debian News ▶ http://RaphaelHertzog.com (English) ▶ http://RaphaelHertzog.fr (Français) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#496930: Status
On Mon, Aug 09 2010, Daniel Dehennin wrote: For now, it can be closed, should I close it or tag it as wontfix? If the software is never to be packaged, close it. -- Julien Danjou // ᐰ jul...@danjou.info http://julien.danjou.info -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#589945: this is being tracked as a kernel bug (16494)
https://bugzilla.kernel.org/show_bug.cgi?id=16494 -- Andy, BlueArc Engineering
Bug#591290: Buffer I/O error on device sr0, logical block 0
On Mon, Aug 9, 2010 at 08:02, Stanislav Maslovski stanislav.maslov...@gmail.com wrote: On Tue, Aug 03, 2010 at 08:20:03AM +0200, Kay Sievers wrote: Thanks for your input. I did what you suggested; the log from runnig 'udevadm test /class/block/sr0' is attached to this e-mail. I see lots of the same errors in dmesg when I run this test (see below). I can do further tests if you tell me which calls I should run manually. It's a Debian bug. With upstream udev rules from 'make install', blkid runs only for data disks. Kay -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#503679: mirror listing update for russell.cs.bilgi.edu.tr
On Sun, Aug 8, 2010 at 7:11 PM, Simon Paillard simon.paill...@resel.enst-bretagne.fr wrote: Hi Onur, It seem we still have some old questions to solve :-) On Sat, Dec 27, 2008 at 07:55:47PM +0100, Simon Paillard wrote: On Sun, Nov 02, 2008 at 09:20:51PM +0100, Simon Paillard wrote: On Sun, Nov 02, 2008 at 07:57:58PM +0200, onur güngör wrote: On Sun, Nov 2, 2008 at 4:08 PM, Simon Paillard wrote: On Mon, Oct 27, 2008 at 12:53:05PM +, Onur Gungor wrote: Actually the purpose of this update was to change the domain name of the mirror to russell.cs.bilgi.edu.tr . So we will be glad if you change it to russell. No problem. However, please confirm that you will keep godel.cs.bilgi.edu.tr functionnal and pointing to russell, because many Debian users are already configured with the name godel. 1/ Site name The bug is about moving from godel.cs.bilgi.edu.tr to russell.cs.bilgi.edu.tr. However, the local trace file is named http://russell.cs.bilgi.edu.tr/debian-volatile/project/trace/godel.cs.bilgi.edu.tr Instead, I'd like to propose: create a debian.cs.bilgi.edu.tr which points to whatever host you want and set MIRRORNAME in ftpsync.conf to debian.cs.bilgi.edu.tr, it's easier for everyone. I have changed the MIRRORNAME to russell.cs.bilgi.edu.tr as the bug requires. But we are considering your recommendation also. I just asked my collegues, so when I get an answer, I'll make you know. 2/ ftpsync for volatile as well Please use ftpsync for volatile as well, using a ftpsync-volatile.conf (with the same MIRRORNAME as the standard archive). BTW, you may sync volatile from ftp.tr, see Levent for the push. I have created a configuration file for this. I'm contacting Levent. Thanks for mirroring Debian and best regards. -- Simon Paillard
Bug#592318: codeblocks: crushing at the close
Package: codeblocks Version: 10.05svn6435 Severity: minor System: Linux 2.6.32-5-amd64 #1 SMP Sat Jul 24 01:47:24 UTC 2010 x86_64 X Vendor: The X.Org Foundation X Vendor Release: 10707000 Selinux: No Accessibility: Disabled GTK+ Theme: Glossy Icon Theme: buuf2.30 GTK+ Modules: gnomebreakpad, canberra-gtk-module Memory status: size: 582959104 vsize: 582959104 resident: 79454208 share: 35549184 rss: 79454208 rss_rlim: 18446744073709551615 CPU usage: start_time: 1281340588 rtime: 12780 utime: 10734 stime: 2046 cutime:92 cstime: 46 timeout: 0 it_real_value: 0 frequency: 100 Backtrace was generated from '/usr/bin/codeblocks' [Thread debugging using libthread_db enabled] [New Thread 0x7f97380c5710 (LWP 4448)] [New Thread 0x7f97388c6710 (LWP 4447)] [New Thread 0x7f97390c7710 (LWP 4446)] [New Thread 0x7f97398c8710 (LWP 4445)] 0x7f9744bd7b4d in waitpid () from /lib/libpthread.so.0 #0 0x7f9744bd7b4d in waitpid () from /lib/libpthread.so.0 #1 0x7f97424b2929 in IA__g_spawn_sync ( working_directory=value optimized out, argv=value optimized out, envp=value optimized out, flags=value optimized out, child_setup=value optimized out, user_data=value optimized out, standard_output=0x0, standard_error=0x0, exit_status=0x0, error=0x7fff592312b8) at /tmp/buildd/glib2.0-2.24.1/glib/gspawn.c:386 #2 0x7f97424b2c39 in IA__g_spawn_command_line_sync ( command_line=value optimized out, standard_output=0x0, standard_error=0x0, exit_status=0x0, error=0x7fff592312b8) at /tmp/buildd/glib2.0-2.24.1/glib/gspawn.c:700 #3 0x7f973acc4de1 in ?? () from /usr/lib/gtk-2.0/modules/libgnomebreakpad.so #4 signal handler called #5 0x7f9743eea175 in raise () from /lib/libc.so.6 #6 0x7f9743eecf80 in abort () from /lib/libc.so.6 #7 0x7f9744ee1921 in wxFatalSignalHandler () from /usr/lib/libwx_baseu-2.8.so.0 #8 signal handler called #9 0x0131 in ?? () #10 0x7f9747016d70 in wxPGGlobalVarsClass::~wxPGGlobalVarsClass() () from /usr/lib/libcodeblocks.so.0 #11 0x7f974702ab08 in wxPGGlobalVarsClassManager::~wxPGGlobalVarsClassManager() () from /usr/lib/libcodeblocks.so.0 #12 0x7f9743eee975 in __cxa_finalize () from /lib/libc.so.6 #13 0x7f9746d0bf46 in ?? () from /usr/lib/libcodeblocks.so.0 #14 0x008d in ?? () #15 0x in ?? () Thread 5 (Thread 0x7f97398c8710 (LWP 4445)): #0 0x7f9744bd416c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 No symbol table info available. #1 0x7f9744edacb3 in wxConditionInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #2 0x7f9744edb879 in wxSemaphoreInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #3 0x7f9746db4c0a in BackgroundThread::Entry() () from /usr/lib/libcodeblocks.so.0 No symbol table info available. #4 0x7f9744edc1ca in wxThreadInternal::PthreadStart(wxThread*) () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #5 0x7f9744bcf8ba in start_thread () from /lib/libpthread.so.0 No symbol table info available. #6 0x7f9743f8701d in clone () from /lib/libc.so.6 No symbol table info available. #7 0x in ?? () No symbol table info available. Thread 4 (Thread 0x7f97390c7710 (LWP 4446)): #0 0x7f9744bd416c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 No symbol table info available. #1 0x7f9744edacb3 in wxConditionInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #2 0x7f9744edb879 in wxSemaphoreInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #3 0x7f9746db4c0a in BackgroundThread::Entry() () from /usr/lib/libcodeblocks.so.0 No symbol table info available. #4 0x7f9744edc1ca in wxThreadInternal::PthreadStart(wxThread*) () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #5 0x7f9744bcf8ba in start_thread () from /lib/libpthread.so.0 No symbol table info available. #6 0x7f9743f8701d in clone () from /lib/libc.so.6 No symbol table info available. #7 0x in ?? () No symbol table info available. Thread 3 (Thread 0x7f97388c6710 (LWP 4447)): #0 0x7f9744bd416c in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 No symbol table info available. #1 0x7f9744edacb3 in wxConditionInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #2 0x7f9744edb879 in wxSemaphoreInternal::Wait() () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #3 0x7f9746db4c0a in BackgroundThread::Entry() () from /usr/lib/libcodeblocks.so.0 No symbol table info available. #4 0x7f9744edc1ca in wxThreadInternal::PthreadStart(wxThread*) () from /usr/lib/libwx_baseu-2.8.so.0 No symbol table info available. #5 0x7f9744bcf8ba in start_thread () from /lib/libpthread.so.0 No symbol table info
Bug#587657: locally installed plugins aren't loaded
On Sun, Aug 08, 2010 at 02:29:02AM +0200, Niels Thykier wrote: Lines regarding org.sat4j where identical in both bundles.info files =o( I very much hope you have overlooked something here. This below is from your ~/.eclipse bundles.info org.sat4j.core,2.2.0.v20100801,plugins/org.sat4j.core_2.2.0.v20100625.jar,4,false org.sat4j.pb,2.2.0.v20100801,plugins/org.sat4j.pb_2.2.0.v20100625.jar,4,false and this is from my /usr/lib/eclipse/.../bundles.info: org.sat4j.core,2.2.0.v20100625,plugins/org.sat4j.core_2.2.0.v20100625.jar,4,false org.sat4j.pb,2.2.0.v20100625,plugins/org.sat4j.pb_2.2.0.v20100625.jar,4,false If you look at the second entry (after the first comma) the version numbers (the date parts) are different. If your You are right, I overlooked that second entry. If you look closely you'll notice that third entry got right version number and there is missmatch between those 2 entries. After fixing second entry I finally can see my ADT plugin =o)) Thanks for all your help =o))) Best regards Robert -- NameLess, the Jedi | Just a friendly Jedi Knight Robert Ramięga | http://nlj.plukwa.net/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592319: Please add (or allow me to add where possible) debian-l10n-romanian to various gateways/archives
Package: lists.debian.org Severity: wishlist Hi, Currently the Romanian community is small enough to use the -l10n list even for -user stuff[0], but the list is not available via gmane, googlegroups or other similar services, which would be helpful for people preferring a web interface/forum like experience. Please subscribe the list to googlegroups and gmane (or any other similar service you think it makes sense). With your approval, I could do it myself for gmane[1], but have no ideea how to do it for googlegroups... [0] I'll bother you with another wishlist bug if this ever changes ;) [1] http://gmane.org/subscribe.php Many thanks, Andrei -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.29-2-amd64 (SMP w/2 CPU cores) Locale: LANG=ro_RO.UTF-8, LC_CTYPE=ro_RO.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591397: Iceweasel produces error popups before starting and runs incredibly slowly
On 09/08/2010 08:48, Mike Hommey wrote: On Sun, Aug 08, 2010 at 12:25:35PM +0100, Richard Kettlewell wrote: On 08/08/2010 08:25, Mike Hommey wrote: Could you attach a full strace output for iceweasel ? Attached. Command was strace -r -q -o trace -f iceweasel. I think the whole problem is due to this: 10037 0.75 mkdir(/home/richard/.dbus, 0700) = -1 EEXIST (File exists) 10037 0.61 mkdir(/home/richard/.dbus/session-bus, 0700) = -1 EACCES (Permission denied) 10037 0.000198 write(2, Unable to create /home/richard/, 49) = 49 10037 0.82 open(/home/richard/.dbus/session-bus/620e4e5789a46d4838ff0b004746dfa0-10, O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 EACCES (Permission denied) Arguably, it shouldn't have such a startup impact, but that would be a problem with how dbus operates, imho. Can you check the permissions in these directories, fix them, and see if it works better? If so, we'll reassign to dbus. *red face* rich...@deodand:~$ ls -ld .dbus drwx--S--- 3 root richard 4096 Nov 22 2009 .dbus With that fixed it works fine. Sorry for the waste of time! ttfn/rjk -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591944: [linux-2.6] I can't see all files and directory with mount.cifs
When i mount.cifs a windows share from a server (samba 3.0), i can see only 151 files and dir with ls -al | wc -l but thereis around 600 files and dir on this share. If i reboot my host with 2.6.26 (kernel from lenny) i can see all files and dir ... I test with squeeze and sid (i686) and i get the same problem. Note that i can cd and cat invisible files and dir if i know their names (i can't see them with ls) ! The problem do not occur with smbclient or nautilus with smb://server/share, only with mount.cifs Please retest with 2.6.32-19 from unstable, -5 is quite old. I test with 2.6.32-19 today (*) on a debian sid (i686). The problem is still there. I test also with an old 2.6.32 version (2.6.32-8) : same problem. With 2.6.26-21 and 2.6.26-24 (from lenny) on this same host (debian sid i686) there is no problem : i can see all files and directories. Thank you, Guy (*) $ apt-cache policy linux-image-2.6.32-5-686 linux-image-2.6.32-5-686: Installé : 2.6.32-19 Candidat : 2.6.32-19 Table de version : *** 2.6.32-19 0 500 http://ftp2.fr.debian.org sid/main Packages 100 /var/lib/dpkg/status 2.6.32-18 0 300 http://ftp2.fr.debian.org squeeze/main Packages -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592286: python-kde4-dev doesn't actually contain pykdeuic4
retitle 592286 python-kde4-dev needs to depend on python-kde4 thanks Turns out that applications using PyKDE4 need those uic files at runtime. So instead python-kde4-dev should just depend on python-kde4 to keep the symlink always valid. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592315: firefox/chromium fails with libnss3-1d from unstable
On Mon, Aug 09, 2010 at 05:50:43PM +1000, Chris Donoghue wrote: Package: libnss3-1d Version: 3.12.7-1 Severity: normal Tags: sid This fails on chromium and firefox on certain https sites. e.g. going to https://www.citylink.com.au (...) Installing back version 3.12.6-3 makes things work again. Long story short: the server is insecure (see the upstream bug below). A workaround for iceweasel is given here: https://bugzilla.mozilla.org/show_bug.cgi?id=583337#c6 Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592320: nslcd: unnecessary $ expansions cause spurious warnings
Package: nss-pam-ldapd Version: 0.7.2 Severity: minor [Seen in version 0.7.2 on Ubuntu lucid, probably also applies to the latest version since the VCS shows no relevant code changes since then.] common/expr.c:parse_dollar_expression() will always evaluate $cn in ${gecos:-$cn} even when the gecos attribute is non-null. For an entry with multiple cn values, this results in warnings entry $dn contains multiple cn values which are just an annoyance when the entry also contains a gecos attribute. (There are legitimate reasons for the cn attribute to be multi-valued.) Would it be possible to optimize away the evaluation of the right-hand side of :- and :+ based on the value of the left-hand side? -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592319: Please add (or allow me to add where possible) debian-l10n-romanian to various gateways/archives
On Lu, 09 aug 10, 11:23:08, Andrei POPESCU wrote: Currently the Romanian community is small enough to use the -l10n list even for -user stuff[0], but the list is not available via gmane, googlegroups or other similar services, which would be helpful for people preferring a web interface/forum like experience. Forgot to mention, could you please also change the description of -l10n-romanian to: Discussing Romanian localization issues, mainly translating Debian docs and programs to Romanian. This list is currently also used for support and general discussions among Romanian users. Regards, Andrei -- Offtopic discussions among Debian users and developers: http://lists.alioth.debian.org/mailman/listinfo/d-community-offtopic signature.asc Description: Digital signature
Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Am 2010-08-08 16:58:34, schrieb Slavko: and it works. But when i send filename to editor by pressing F4, this quoting must by done by mc. In this case you are right. However, here it has never used an external editor for viewing or editing. How do you have configred mc? I have tried it (I use mc minutely since I write my E-Mails with it from mutt) and it does never use ${EDITOR} (set to mcedit) or editor I realy can not reproduce the problem. Thanks, Greetings and nice Day/Evening Michelle Konzack -- # Debian GNU/Linux Consultant ## Development of Intranet and Embedded Systems with Debian GNU/Linux itsyst...@tdnet France EURL itsyst...@tdnet UG (limited liability) Owner Michelle KonzackOwner Michelle Konzack Apt. 917 (homeoffice) 50, rue de Soultz Kinzigstraße 17 67100 Strasbourg/France 77694 Kehl/Germany Tel: +33-6-61925193 mobil Tel: +49-177-9351947 mobil Tel: +33-9-52705884 fix http://www.itsystems.tamay-dogan.net/ http://www.flexray4linux.org/ http://www.debian.tamay-dogan.net/ http://www.can4linux.org/ Jabber linux4miche...@jabber.ccc.de ICQ#328449886 Linux-User #280138 with the Linux Counter, http://counter.li.org/ signature.pgp Description: Digital signature
Bug#592208: [Pkg-mc-devel] Bug#592208: mc: Can't open files for edit (F4) with space in filenames
On Mon, 2010-08-09 at 10:34 +0200, Michelle Konzack wrote: In this case you are right. However, here it has never used an external editor for viewing or editing. How do you have configred mc? I suspect that he is using it for sensible-editor and our sensible-editor script contains the following: mcedit $@ I guess that if you configure mcedit as sensible-editor and turn on use external editor switch in mc it might not quote the name correctly. I didn't check this out though... -- Sincerely yours, Yury V. Zaytsev -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592321: missing init script
Package: thinkfan Version: 0.7.1-1 Severity: grave As reported by Uros Golja goljau comcom si: as far as I can tell, the thinkfan package (version 0.7.1-1) in Debian does not ship with an init.d script. Is this a bug or a feature? -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
On Mon, 2010-08-09 at 10:42 +0200, Yury V. Zaytsev wrote: I guess that if you configure mcedit as sensible-editor and turn on use external editor switch in mc it might not quote the name correctly. I didn't check this out though... Hmmm... just tested my assumption. Seems to work fine. I can't reproduce this bug. -- Sincerely yours, Yury V. Zaytsev -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591397: Iceweasel produces error popups before starting and runs incredibly slowly
reassign 591397 libdbus-1-3 thanks On Mon, Aug 09, 2010 at 09:22:54AM +0100, Richard Kettlewell wrote: On 09/08/2010 08:48, Mike Hommey wrote: On Sun, Aug 08, 2010 at 12:25:35PM +0100, Richard Kettlewell wrote: On 08/08/2010 08:25, Mike Hommey wrote: Could you attach a full strace output for iceweasel ? Attached. Command was strace -r -q -o trace -f iceweasel. I think the whole problem is due to this: 10037 0.75 mkdir(/home/richard/.dbus, 0700) = -1 EEXIST (File exists) 10037 0.61 mkdir(/home/richard/.dbus/session-bus, 0700) = -1 EACCES (Permission denied) 10037 0.000198 write(2, Unable to create /home/richard/, 49) = 49 10037 0.82 open(/home/richard/.dbus/session-bus/620e4e5789a46d4838ff0b004746dfa0-10, O_WRONLY|O_CREAT|O_TRUNC, 0666) = -1 EACCES (Permission denied) Arguably, it shouldn't have such a startup impact, but that would be a problem with how dbus operates, imho. Can you check the permissions in these directories, fix them, and see if it works better? If so, we'll reassign to dbus. *red face* rich...@deodand:~$ ls -ld .dbus drwx--S--- 3 root richard 4096 Nov 22 2009 .dbus With that fixed it works fine. I still think there must be something wrong with how dbus handles that, as it shouldn't lead to such a delay in application startup. Cheers, Mike -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Am 2010-08-09 10:46:46, schrieb Yury V. Zaytsev: On Mon, 2010-08-09 at 10:42 +0200, Yury V. Zaytsev wrote: I guess that if you configure mcedit as sensible-editor and turn on use external editor switch in mc it might not quote the name correctly. I didn't check this out though... Hmmm... just tested my assumption. Seems to work fine. I can't reproduce this bug. Here too... Does quoting depend on the shell used? Thanks, Greetings and nice Day/Evening Michelle Konzack -- # Debian GNU/Linux Consultant ## Development of Intranet and Embedded Systems with Debian GNU/Linux itsyst...@tdnet France EURL itsyst...@tdnet UG (limited liability) Owner Michelle KonzackOwner Michelle Konzack Apt. 917 (homeoffice) 50, rue de Soultz Kinzigstraße 17 67100 Strasbourg/France 77694 Kehl/Germany Tel: +33-6-61925193 mobil Tel: +49-177-9351947 mobil Tel: +33-9-52705884 fix http://www.itsystems.tamay-dogan.net/ http://www.flexray4linux.org/ http://www.debian.tamay-dogan.net/ http://www.can4linux.org/ Jabber linux4miche...@jabber.ccc.de ICQ#328449886 Linux-User #280138 with the Linux Counter, http://counter.li.org/ signature.pgp Description: Digital signature
Bug#592322: freshclam.conf: update moves DatabaseMirror line
Package: clamav-freshclam Version: 0.96.1+dfsg-3 Severity: normal After updating clamav-freshclam I got this diff: --- /etc/clamav/freshclam.conf 2010-06-10 15:40:04.624888178 +0300 +++ /var/lib/clamav/freshclam.conf 2010-08-09 12:03:46.265177327 +0300 @@ -23,7 +23,7 @@ Bytecode true # Check for new database 24 times a day Checks 24 -DatabaseMirror db.ro.clamav.net DatabaseMirror db.local.clamav.net DatabaseMirror database.clamav.net +DatabaseMirror db.ro.clamav.net SubmitDetectionStats /usr/local/etc/clamd.conf That is not right, it moves my manually set mirror (db.ro.clamav.net) to the end, effectively disabling it, since mirrors are tried in the order specified in freshclam.conf. -- Package-specific info: --- configuration --- Checking configuration files in /usr/local/etc Config file: clamd.conf --- Config file: freshclam.conf --- LogFileMaxSize = 2097152 LogTime = yes LogSyslog = yes LogFacility = LOG_LOCAL6 LogVerbose disabled PidFile disabled DatabaseDirectory = /usr/local/share/clamav Foreground disabled Debug disabled AllowSupplementaryGroups disabled UpdateLogFile = /var/tmp/freshclam-dev.log DatabaseOwner = clamav Checks = 288 DNSDatabaseInfo = current.cvd.clamav.net DatabaseMirror = db.ro.clamav.net MaxAttempts = 3 ScriptedUpdates = yes TestDatabases = yes CompressLocalDatabase = yes ExtraDatabase disabled HTTPProxyServer disabled HTTPProxyPort disabled HTTPProxyUsername disabled HTTPProxyPassword disabled HTTPUserAgent = ClamAV/0.96 NotifyClamd = /usr/local/etc/clamd.conf OnUpdateExecute disabled OnErrorExecute disabled OnOutdatedExecute disabled LocalIPAddress disabled ConnectTimeout = 30 ReceiveTimeout = 30 SubmitDetectionStats = /usr/local/etc/clamd.conf DetectionStatsCountry disabled DetectionStatsHostID = 1834CA1A60ABEAD9B92E52FC0A7A1430 SafeBrowsing = yes Bytecode = yes Config file: clamav-milter.conf --- LogFile = /tmp/clamav-milter.log LogFileUnlock disabled LogFileMaxSize = 1048576 LogTime = yes LogSyslog disabled LogFacility = LOG_LOCAL6 LogVerbose = yes PidFile disabled TemporaryDirectory disabled FixStaleSocket = yes MaxThreads = 10 ReadTimeout = 120 Foreground disabled User disabled AllowSupplementaryGroups disabled MaxFileSize = 26214400 ClamdSocket = tcp:127.0.0.1:3310 MilterSocket = local:/var/spool/postfix/clamav/clamav-milter.socket MilterSocketGroup disabled MilterSocketMode disabled LocalNet disabled OnClean = Accept OnInfected = Quarantine OnFail = Defer RejectMsg disabled AddHeader = Yes ReportHostname disabled VirusAction disabled Chroot disabled Whitelist disabled SkipAuthenticated disabled LogInfected = Full Software settings - Version: devel-debian/0.95+dfsg-1-6217-g5925b3d WARNING: Version mismatch: libclamav=devel-debian/0.95+dfsg-1-6217-g5925b3d, clamconf=0.96.1 Optional features supported: MEMPOOL IPv6 CLAMUKO AUTOIT_EA06 BZIP2 RAR JIT Database directory: /usr/local/share/clamav WARNING: freshclam.conf and clamd.conf point to different database directories main.cvd: version 52, sigs: 704727, built on Mon Feb 15 16:54:51 2010 daily.cld: version 11465, sigs: 108855, built on Fri Jul 30 14:43:50 2010 safebrowsing.cvd: version 22733, sigs: 652021, built on Fri Jul 30 17:45:37 2010 bytecode.cvd: version 32, sigs: 8, built on Wed Jul 21 20:29:22 2010 Platform information uname: Linux 2.6.35 #86 SMP PREEMPT Mon Aug 2 09:28:05 EEST 2010 x86_64 OS: linux-gnu, ARCH: x86_64, CPU: x86_64 Full OS version: Debian GNU/Linux unstable (sid) zlib version: 1.2.5 (1.2.5), compile flags: a9 Build information - GNU C: 4.5.1 20100419 (prerelease) (4.5.1) GNU C++: 4.4.4 (4.4.4) CPPFLAGS: CFLAGS: -g -O2 -fno-strict-aliasing CXXFLAGS: LDFLAGS: Configure: 'CC=gcc-4.5' 'CXX=g++-4.5' --- data dir --- total 52276 -rw-r--r-- 1 clamav clamav81920 Jul 21 20:36 bytecode.cld -rw-r--r-- 1 clamav clamav 1144450 May 12 10:30 clamav-0f0a4f37c629bd698b5496275820d228 -rw-r--r-- 1 clamav clamav 1305730 May 12 10:30 clamav-1f17ed2cdedc0937fb7fe976c5ba787e -rw-r--r-- 1 clamav clamav 9788770 May 12 10:30 clamav-2513f3e32b00f8b939519cba62edae9e -rw-r--r-- 1 clamav clamav 335872 May 12 10:30 clamav-5c0271fb289e43c101da2b9f8be65933 -rw-r--r-- 1 clamav clamav 1560610 May 12 10:30 clamav-9f04afe919251c743736ae892053279a -rw-r--r-- 1 clamav clamav 9708736 May 12 10:30 clamav-ab3318f3a5413b3d43ff71726196d3a5 -rw-r--r-- 1 clamav clamav 6669312 Aug 9 08:34 daily.cld -rw-r--r-- 1 root root782 Aug 9 12:03 freshclam.conf -rw-r--r-- 1 clamav clamav 22906487 May 12 22:05 main.cvd -rw--- 1 clamav clamav 988 Aug 9 11:03 mirrors.dat -rw--- 1 clamav clamav 512 Jun 10 15:42 stats.dat -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8,
Bug#592323: /etc/cron.weekly/apt-xapian-index: cron job exits with error
Package: apt-xapian-index Version: 0.38 Severity: normal File: /etc/cron.weekly/apt-xapian-index I get the following error in my daily logwatch output: /etc/cron.weekly/apt-xapian-index: Traceback (most recent call last): File /usr/sbin/update-apt-xapian-index, line 102, in module indexer.incrementalUpdate() File /usr/lib/pymodules/python2.6/axi/indexer.py, line 629, in incrementalUpdate self.updateIndex(dbpath) File /usr/lib/pymodules/python2.6/axi/indexer.py, line 594, in updateIndex unchanged, outdated, obsolete = self.compareCacheToDb(cache, db) File /usr/lib/pymodules/python2.6/axi/indexer.py, line 566, in compareCacheToDb for (idx, m) in enumerate(db.postlist()): File /usr/lib/python2.6/dist-packages/xapian.py, line 5534, in next self._iter.next() RuntimeError: basic_string::assign run-parts: /etc/cron.weekly/apt-xapian-index exited with return code 1 I've no idea what's happening here, so any help appreciated... Kind regards, Jan -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (900, 'unstable'), (500, 'experimental'), (99, 'maverick-updates'), (99, 'maverick') Architecture: i386 (i586) Kernel: Linux 2.6.32-5-486 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages apt-xapian-index depends on: ii python2.6.5-12 interactive high-level object-orie ii python-apt0.7.96.1 Python interface to libapt-pkg ii python-debian 0.1.18 Python modules to work with Debian ii python-support1.0.9 automated rebuilding support for P ii python-xapian 1.0.20-1 Xapian search engine interface for apt-xapian-index recommends no packages. Versions of packages apt-xapian-index suggests: pn app-install-data none (no description available) pn python-xdgnone (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#572419: mirror submission for mirror.bjtu.edu.cn
Hi, Thanks for your reply. On Mon, Aug 09, 2010 at 09:33:16AM +0800, ideal wrote: 2010/8/8 Simon Paillard spaill...@debian.org: http://debian.bjtu.edu.cn/debian/project/trace/ shows that: - the mirror is up to date (great!) - ftpsync is not used (or something overwrites the local trace file) What about this specific item ? Could you please check ? For reference, see http://www.debian.org/mirror/ftpmirror#how - you are not syncing/pushed from ftp.tw Hi, sorry for still have not fixed all problems until now. I can't set up push mirroring successfully because ssh port 22 is blocked by school firewall, I am solving this problem. http://debian.bjtu.edu.cn/debian/dists/unstable/ says: - you want to provide all architectures, correct ? Yes, now exclude nothing. Ok, great. -- Simon Paillard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Ahoj, Dňa Mon, 09 Aug 2010 10:46:46 +0200 Yury V. Zaytsev y...@shurup.com napísal: On Mon, 2010-08-09 at 10:42 +0200, Yury V. Zaytsev wrote: I guess that if you configure mcedit as sensible-editor and turn on use external editor switch in mc it might not quote the name correctly. I didn't check this out though... Hmmm... just tested my assumption. Seems to work fine. I can't reproduce this bug. I have configured mcedit as editor, by alternatives: There are 4 choices for the alternative editor (providing /usr/bin/editor). SelectionPathPriority Status 0/bin/nano40auto mode 1/bin/ed -100 manual mode 2/bin/nano40manual mode * 3/usr/bin/mcedit-debian 25manual mode 4/usr/bin/vim.tiny10manual mode I tested change it to nano and vim too and both works fain with space in filename. If i use debian.mcedit as alternative, then space is used as separator... -- s pozdravom Slavko http://slavino.sk signature.asc Description: PGP signature
Bug#592187: Bug#576838: virtio network crashes again
So, testing begins. First conclusion: not all traffic patterns produce the page allocation failure. rdiff-backup only writing to an nfs-share does no harm; rdiff-backup reading and writing (incremental backup) leads to (nearly immediate) error. The nfs-share is always mounted with proto=tcp and nfsv3; /proc/mount says: fileserver.backup...:/export/backup/lbork /.cbackup-mp nfs rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,port=65535,timeo=600,retrans=2,sec=sys,mountport=65535,addr=x.x.x.x 0 0 This is the result of 2.6.32-18 with virtio: (/proc/meminfo within ten seconds of the page allocation failure, if that helps) MemTotal: 509072 kB MemFree: 10356 kB Buffers:4244 kB Cached: 419996 kB SwapCached:0 kB Active:50856 kB Inactive: 422424 kB Active(anon): 24948 kB Inactive(anon):25084 kB Active(file): 25908 kB Inactive(file): 397340 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4194296 kB SwapFree:4194296 kB Dirty: 5056 kB Writeback: 0 kB AnonPages: 49080 kB Mapped: 7868 kB Shmem: 952 kB Slab: 11736 kB SReclaimable: 5604 kB SUnreclaim: 6132 kB KernelStack:1920 kB PageTables: 3728 kB NFS_Unstable: 0 kB Bounce:0 kB WritebackTmp: 0 kB CommitLimit: 4448832 kB Committed_AS:1419384 kB VmallocTotal: 34359738367 kB VmallocUsed:5536 kB VmallocChunk: 34359728048 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free:0 HugePages_Rsvd:0 HugePages_Surp:0 Hugepagesize: 2048 kB DirectMap4k:8180 kB DirectMap2M: 516096 kB [ 170.625928] rdiff-backup.bi: page allocation failure. order:0, mode:0x20 [ 170.625934] Pid: 2398, comm: rdiff-backup.bi Not tainted 2.6.32-5-amd64 #1 [ 170.625935] Call Trace: [ 170.625937] IRQ [810b8b7f] ? __alloc_pages_nodemask+0x55b/0x5d0 [ 170.625993] [81245a6c] ? __alloc_skb+0x69/0x15a [ 170.626002] [a01aee52] ? try_fill_recv+0x8b/0x18b [virtio_net] [ 170.626004] [a01af8c6] ? virtnet_poll+0x543/0x5c9 [virtio_net] [ 170.626010] [8124cb8b] ? net_rx_action+0xae/0x1c9 [ 170.626032] [81052735] ? __do_softirq+0xdd/0x1a0 [ 170.626035] [a01ae153] ? skb_recv_done+0x28/0x34 [virtio_net] [ 170.626044] [81011cac] ? call_softirq+0x1c/0x30 [ 170.626049] [81013207] ? do_softirq+0x3f/0x7c [ 170.626051] [810525a4] ? irq_exit+0x36/0x76 [ 170.626053] [810128fe] ? do_IRQ+0xa0/0xb6 [ 170.626061] [810114d3] ? ret_from_intr+0x0/0x11 [ 170.626062] EOI [ 170.626063] Mem-Info: [ 170.626065] Node 0 DMA per-cpu: [ 170.626072] CPU0: hi:0, btch: 1 usd: 0 [ 170.626073] CPU1: hi:0, btch: 1 usd: 0 [ 170.626074] Node 0 DMA32 per-cpu: [ 170.626076] CPU0: hi: 186, btch: 31 usd: 30 [ 170.626078] CPU1: hi: 186, btch: 31 usd: 181 [ 170.626082] active_anon:6237 inactive_anon:6271 isolated_anon:0 [ 170.626083] active_file:6476 inactive_file:100535 isolated_file:32 [ 170.626084] unevictable:0 dirty:1008 writeback:0 unstable:2050 [ 170.626084] free:729 slab_reclaimable:1401 slab_unreclaimable:1762 [ 170.626085] mapped:1967 shmem:238 pagetables:932 bounce:0 [ 170.626087] Node 0 DMA free:1980kB min:84kB low:104kB high:124kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:13856kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15372kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:32kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 170.626099] lowmem_reserve[]: 0 489 489 489 [ 170.626101] Node 0 DMA32 free:936kB min:2784kB low:3480kB high:4176kB active_anon:24948kB inactive_anon:25084kB active_file:25904kB inactive_file:388284kB unevictable:0kB isolated(anon):0kB isolated(file):128kB present:500948kB mlocked:0kB dirty:4032kB writeback:0kB mapped:7868kB shmem:952kB slab_reclaimable:5572kB slab_unreclaimable:7040kB kernel_stack:1912kB pagetables:3728kB unstable:8200kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 170.626110] lowmem_reserve[]: 0 0 0 0 [ 170.626112] Node 0 DMA: 0*4kB 1*8kB 1*16kB 1*32kB 0*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 1976kB [ 170.626118] Node 0 DMA32: 0*4kB 1*8kB 0*16kB 1*32kB 0*64kB 1*128kB 1*256kB 1*512kB 0*1024kB 0*2048kB 0*4096kB = 936kB [ 170.626125] 107278 total pagecache pages [ 170.626126] 0 pages in swap cache [ 170.626127] Swap cache stats: add 0, delete 0, find 0/0 [ 170.626128] Free swap = 4194296kB [ 170.626130] Total swap = 4194296kB [ 170.631675] 131069 pages RAM [ 170.631677] 3801 pages reserved [ 170.631678] 23548 pages shared [ 170.631679] 113310
Bug#592309: netbase: system waits for wired cable after yesterday's updates
On Aug 09, Mikko Sorri mikkoso...@gmail.com wrote: I'm not sure if this is right package because netbase was not updated This is definitely not related to netbase. yestarday. If not, please forward to right address. I do not know what causes these errors. -- ciao, Marco signature.asc Description: Digital signature
Bug#592324: coinor-libipopt0: Missing dependency to libmumps(-seq)-4.9.2
Package: coinor-libipopt0 Version: 3.8.3-2 Severity: normal Hi all, the library libipopt.so.0.0.0 has undefined symbols: MPI_Finalize MPI_Comm_rank MPI_Init dmumps_c also when re-building the binary package a corresponding warning message is generated. The missing symbols are resolved when linking the applications with -lipopt -ldmumps_seq *OR* -ldmumps A hint in the README file would be nice. IMO the best option would be to add MUMPS to the dependency list, e.g.: libmumps-4.9.2 (= 4.9.2) | libmumps-seq-4.9.2 (= 4.9.2) (likewise libmumps(-seq)-dev for the build dependencies) Another option would be to link libipopt.so directly with libdmumps_seq. But I think this MPI-dummy provided by MUMPS is *really* ugly :-/ Cheers, Michael -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages coinor-libipopt0 depends on: ii libatlas3gf-base 3.6.0-24 Automatically Tuned Linear Algebra ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgcc1 1:4.4.4-8 GCC support library ii libstdc++64.4.4-8The GNU Standard C++ Library v3 coinor-libipopt0 recommends no packages. coinor-libipopt0 suggests no packages. -- no debconf information Forschungszentrum Juelich GmbH 52425 Juelich Sitz der Gesellschaft: Juelich Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 Vorsitzender des Aufsichtsrats: MinDirig Dr. Karl Eugen Huthmacher Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. Sebastian M. Schmidt -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#461150: libowfat-dev: possible to link with glibc?
tags 461150 patch thanks The attached patch modify debian/rules to compile libowfat also against glibc installing it as /usr/lib/libowfat.a From a quick test I've done it seems to work. I'm new to libowfat so more testing is needed. HTH -- Walter Franzini http://aegis.stepbuild.org/ diff -Nru --exclude '*~' libowfat-0.28/debian/changelog libowfat-0.28/debian/changelog --- libowfat-0.28/debian/changelog 2010-08-09 11:26:56.0 +0200 +++ libowfat-0.28/debian/changelog 2010-08-09 11:26:57.0 +0200 @@ -1,3 +1,10 @@ +libowfat (0.28-2.1) unstable; urgency=low + + * Non-maintainer upload. + * Enable linking against glibc + + -- Walter Franzini walter.franz...@gmail.com Mon, 09 Aug 2010 10:11:35 +0200 + libowfat (0.28-2) unstable; urgency=medium * debian/control: Build-Depends: dietlibc-dev (= 0.32-5) [sparc] diff -Nru --exclude '*~' libowfat-0.28/debian/rules libowfat-0.28/debian/rules --- libowfat-0.28/debian/rules 2010-08-09 11:26:56.0 +0200 +++ libowfat-0.28/debian/rules 2010-08-09 11:26:57.0 +0200 @@ -16,14 +16,15 @@ build: deb-checkdir build-stamp build-stamp: patch-stamp - $(MAKE) DIER='' - mv libowfat.a libowfat-glibc.a + $(MAKE) DIET='' + mv libowfat.a libowfat-glibc.a.SAVE $(MAKE) clean DIET='' $(MAKE) DIET='diet -v -Os' touch build-stamp clean: deb-checkdir deb-checkuid $(MAKE) clean DIET='diet -v -Os' + rm -f libowfat-glibc.a.SAVE test ! -e patch-stamp || \ for i in `ls -1r debian/diff/*.diff || :`; do patch -p1 -R $$i; done rm -rf '$(DIR)' .diet @@ -36,7 +37,7 @@ install -d -m0755 '$(DIR)'/usr/include/diet install -m0644 libowfat.a '$(DIR)'/usr/lib/diet/lib/ $(STRIP) --strip-debug '$(DIR)'/usr/lib/diet/lib/libowfat.a - install -m0644 libowfat-glibc.a '$(DIR)'/usr/lib/libowfat.a + install -m0644 libowfat-glibc.a.SAVE '$(DIR)'/usr/lib/libowfat.a $(STRIP) --strip-debug '$(DIR)'/usr/lib/libowfat.a install -m0644 *.h '$(DIR)'/usr/include/diet/ # man pages pgpa2rtlqnXKF.pgp Description: PGP signature
Bug#592325: muttprint does neither print to file nor to STDOUT
Package: muttprint Version: 0.73-2 Severity: important 'echo asdf | muttprint -f - -p - asdf.ps' and 'echo asdf | muttprint -f - -p TO_FILE:./asdf.ps' both return LPR: Error - no default destination available despite both being supposed to print to file. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages muttprint depends on: ii debconf [debconf-2.0] 1.5.35 Debian configuration management sy ii libtext-iconv-perl1.7-2 converts between character sets in ii perl 5.10.1-14 Larry Wall's Practical Extraction ii texlive-fonts-recommended 2009-10TeX Live: Recommended fonts ii texlive-latex-extra 2009-9 TeX Live: LaTeX supplementary pack ii texlive-latex-recommended 2009-10TeX Live: LaTeX recommended packag Versions of packages muttprint recommends: ii bsd-mailx [mail-re 8.1.2-0.20100314cvs-1 simple mail user agent ii evolution [mail-re 2.30.2-1 groupware suite with mail client a ii icedove [mail-read 3.0.6-1 mail/news client with RSS and inte ii kmail [mail-reader 4:4.4.5-1 full featured graphical email clie ii libtimedate-perl 1.2000-1 collection of modules to manipulat ii mutt [mail-reader] 1.5.20-9 text-based mailreader supporting M Versions of packages muttprint suggests: pn compfacenone (no description available) ii dialog 1.1-20100428-1 Displays user-friendly dialog boxe ii imagemagick 8:6.6.0.4-2.1+b1 image manipulation programs pn muttprint-manualnone (no description available) pn ospics none (no description available) ii psutils 1.17-27 A collection of PostScript documen pn slrn | news-reader none (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591628: FTBFS for mlterm
On Mon, Aug 09, 2010 at 03:54:46AM +0200, Rolf Leggewie wrote: On 08.08.2010 06:17, أحمد المحمودي wrote: I think you can empty the dependency_libs field in .la file, as mentioned in the wiki. That too fixes the FTBFS (just tried it now) Since I cannot verify this problem, would you please be so kind to confirm that http://oss.leggewie.org/scim_1.4.9-4.dsc fixes the issue? ---end quoted text--- Yup, building mlterm against libscim-dev libscim8c2a resulting from this source package fixed it indeed. Thanks. -- أحمد المحمودي (Ahmed El-Mahmoudy) Digital design engineer GPG KeyID: 0xEDDDA1B7 GPG Fingerprint: 8206 A196 2084 7E6D 0DF8 B176 BC19 6A94 EDDD A1B7 signature.asc Description: Digital signature
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Hi! On Mon, 2010-08-09 at 11:03 +0200, Michelle Konzack wrote: Here too... Does quoting depend on the shell used? Good point, I have no idea. I have bash, OP has dash. I can't test dash though, as I am not using Debian anyways :-) What I can observe in the source code of do_edit_at_line fn = vfs_canon_and_translate (filename); do_execute (command, fn, EXECUTE_INTERNAL); is that it does not appear to do any quoting explicitly. However, it launches the process with the arguments as it has, so the process knows that it's a file name with a space in between. Try it out by circumventing sensible-editor: EDITOR=mcedit mc. I guess it's an issue with /usr/bin/mcedit-debian that we ship. It probably should have $@ instead of just $...@. I'm not a big fan of this solution, but it appears that sensbile-editor only expects one argument (that is a file name), so we can live with it. Ideas? Best, -- Sincerely yours, Yury V. Zaytsev -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591302: ITP: 7kaa -- real time strategy game
Hi, I did the initial packaging work [1], [2]. The packages compiles and the games starts, but the mouse is unusable yet. Do you encounter the same issue ? Feel free to continue the work. As it is I think it is worthy of an experimental upload. Cheers, Bertrand [1] svn://svn.debian.org/svn/pkg-games/packages/trunk/7kaa/ [2] svn://svn.debian.org/svn/pkg-games/packages/trunk/7kaa-data/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Am 2010-08-09 11:47:08, schrieb Yury V. Zaytsev: Try it out by circumventing sensible-editor: EDITOR=mcedit mc. I guess it's an issue with /usr/bin/mcedit-debian that we ship. It probably should have $@ instead of just $...@. I'm not a big fan of this solution, but it appears that sensbile-editor only expects one argument (that is a file name), so we can live with it. Ideas? Hmmm, I am wondering WHY we have mcedit-debian, if there is a symlink lrwxrwxrwx 1 root root 2 19. Apr 2009 /usr/bin/mcedit - mc which works fine without the need for mcedit-debian. Even mcedit-debian is only calling mcedit $@ and I am puzzeling why. Maybe Debian should drop the thing with mcedit-debian? Thanks, Greetings and nice Day/Evening Michelle Konzack -- # Debian GNU/Linux Consultant ## Development of Intranet and Embedded Systems with Debian GNU/Linux itsyst...@tdnet France EURL itsyst...@tdnet UG (limited liability) Owner Michelle KonzackOwner Michelle Konzack Apt. 917 (homeoffice) 50, rue de Soultz Kinzigstraße 17 67100 Strasbourg/France 77694 Kehl/Germany Tel: +33-6-61925193 mobil Tel: +49-177-9351947 mobil Tel: +33-9-52705884 fix http://www.itsystems.tamay-dogan.net/ http://www.flexray4linux.org/ http://www.debian.tamay-dogan.net/ http://www.can4linux.org/ Jabber linux4miche...@jabber.ccc.de ICQ#328449886 Linux-User #280138 with the Linux Counter, http://counter.li.org/ signature.pgp Description: Digital signature
Bug#592326: Failure of AZTEC test case run.
package: openmpi dpkg --search openmpi gromacs-openmpi: /usr/share/doc/gromacs-openmpi/copyright gromacs-dev: /usr/lib/libmd_mpi_openmpi.la gromacs-dev: /usr/lib/libgmx_mpi_d_openmpi.la gromacs-openmpi: /usr/share/lintian/overrides/gromacs-openmpi gromacs-openmpi: /usr/lib/libmd_mpi_openmpi.so.5 gromacs-openmpi: /usr/lib/libmd_mpi_d_openmpi.so.5.0.0 gromacs-dev: /usr/lib/libmd_mpi_openmpi.so gromacs-dev: /usr/lib/libgmx_mpi_d_openmpi.so gromacs-openmpi: /usr/lib/libmd_mpi_openmpi.so.5.0.0 gromacs-openmpi: /usr/bin/mdrun_mpi_d.openmpi gromacs-openmpi: /usr/lib/libgmx_mpi_d_openmpi.so.5.0.0 gromacs-openmpi: /usr/share/doc/gromacs-openmpi/README.Debian gromacs-dev: /usr/lib/libgmx_mpi_d_openmpi.a gromacs-openmpi: /usr/bin/mdrun_mpi.openmpi gromacs-openmpi: /usr/share/doc/gromacs-openmpi/changelog.Debian.gz gromacs-dev: /usr/lib/libmd_mpi_d_openmpi.la gromacs-openmpi: /usr/share/man/man1/mdrun_mpi_d.openmpi.1.gz gromacs-dev: /usr/lib/libgmx_mpi_openmpi.a gromacs-openmpi: /usr/lib/libgmx_mpi_openmpi.so.5.0.0 gromacs-dev: /usr/lib/libmd_mpi_d_openmpi.so gromacs-openmpi: /usr/lib/libmd_mpi_d_openmpi.so.5 gromacs-dev: /usr/lib/libgmx_mpi_openmpi.la gromacs-openmpi: /usr/share/man/man1/mdrun_mpi.openmpi.1.gz gromacs-openmpi: /usr/share/doc/gromacs-openmpi gromacs-dev: /usr/lib/libmd_mpi_openmpi.a gromacs-dev: /usr/lib/libgmx_mpi_openmpi.so gromacs-openmpi: /usr/lib/libgmx_mpi_openmpi.so.5 gromacs-openmpi: /usr/lib/libgmx_mpi_d_openmpi.so.5 gromacs-dev: /usr/lib/libmd_mpi_d_openmpi.a Dear support, I am trying to run a test case of AZTEC library named az_tutorial_with_MPI.f . The example uses gfortran + MPI. The compilation and linkage stage goes O.K., generating an executable 'sample'. But when I try to run sample (on 1 or more processors) the run crushes immediately. The compilation and linkage stage is done as follows: gfortran -O -I/shared/include -I/shared/include/openmpi/ompi/mpi/cxx -I../lib -DMAX_MEM_SIZE=16731136 -DCOMM_BUFF_SIZE=20 -DMAX_CHUNK_SIZE=20 -c -o az_tutorial_with_MPI.o az_tutorial_with_MPI.f gfortran az_tutorial_with_MPI.o -O -L../lib -laztec -lm -L/shared/lib -lgfortran -lmpi -lmpi_f77 -o sample The run: /shared/home/gordon/Aztec_lib.dir/appmpirun -np 1 sample [cluster:12046] *** Process received signal *** [cluster:12046] Signal: Segmentation fault (11) [cluster:12046] Signal code: Address not mapped (1) [cluster:12046] Failing at address: 0x10098 [cluster:12046] [ 0] /lib/libc.so.6 [0x7fd4a2fa8f60] [cluster:12046] [ 1] /shared/lib/libmpi.so.0(MPI_Comm_size+0x6e) [0x7fd4a376c34e] [cluster:12046] [ 2] sample [0x4178aa] [cluster:12046] [ 3] sample [0x402a07] [cluster:12046] [ 4] sample [0x402175] [cluster:12046] [ 5] sample [0x401c52] [cluster:12046] [ 6] sample [0x448edc] [cluster:12046] [ 7] /lib/libc.so.6(__libc_start_main+0xe6) [0x7fd4a2f951a6] [cluster:12046] [ 8] sample [0x401a49] [cluster:12046] *** End of error message *** -- mpirun noticed that process rank 0 with PID 12046 on node cluster exited on signal 11 (Segmentation fault). Here is some information about the machine: uname -a Linux cluster 2.6.26-2-amd64 #1 SMP Sun Jun 20 20:16:30 UTC 2010 x86_64 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Debian Description:Debian GNU/Linux 5.0.5 (lenny) Release:5.0.5 Codename: lenny gcc --version gcc (Debian 4.3.2-1.1) 4.3.2 gfortran --version GNU Fortran (Debian 4.3.2-1.1) 4.3.2 ldd sample linux-vdso.so.1 = (0x7fffe000) libgfortran.so.3 = /usr/lib/libgfortran.so.3 (0x7fd29db16000) libm.so.6 = /lib/libm.so.6 (0x7fd29d893000) libmpi.so.0 = /shared/lib/libmpi.so.0 (0x7fd29d5e7000) libmpi_f77.so.0 = /shared/lib/libmpi_f77.so.0 (0x7fd29d3af000) libgcc_s.so.1 = /lib/libgcc_s.so.1 (0x7fd29d198000) libc.so.6 = /lib/libc.so.6 (0x7fd29ce45000) libopen-rte.so.0 = /shared/lib/libopen-rte.so.0 (0x7fd29cbf8000) libopen-pal.so.0 = /shared/lib/libopen-pal.so.0 (0x7fd29c9a2000) libdl.so.2 = /lib/libdl.so.2 (0x7fd29c79e000) libnsl.so.1 = /lib/libnsl.so.1 (0x7fd29c586000) libutil.so.1 = /lib/libutil.so.1 (0x7fd29c383000) libpthread.so.0 = /lib/libpthread.so.0 (0x7fd29c167000) /lib64/ld-linux-x86-64.so.2 (0x7fd29ddf1000) Let me just mention that the C+MPI test case of the AZTEC library 'az_tutorial.c' runs with no problem. Also, az_tutorial_with_MPI.f runs O.K. on my 32bit LINUX cluster running gcc,g77 and MPICH, and on my SGI 16 processors Ithanium 64 bit machine. Thank you for your help, Sincerely, Rachel Dr. Rachel Gordon Senior Research FellowPhone: +972-4-8293811 Dept. of Aerospace Eng. Fax: +972 - 4 - 8292030 The Technion, Haifa 32000, Israel email: rgor...@tx.technion.ac.il -- To UNSUBSCRIBE, email to
Bug#592290: [linux-source-2.6.32] X.org does not work with Intel driver and 4GB RAM
I'm not sure how to proceed in my case. How can I test if the changes mentioned in the upstream bug report ( http://bugs.freedesktop.org/show_bug.cgi?id=25510 ) have reached the Squeeze's current kernel version? I'm pretty sure they are. If your issue is still present in 2.6.35 (available in experimental), please file a bug against product=DRI, component=DRM/intel at http://bugs.freedesktop.org/ and let us know the bug number so we can track it. I am currently running kernel version 2.6.35 and everything works fine without the memory limitation set by the kernel parameter. So the remedy for my issues are on the path to 2.6.35. How can I narrow down the patches curing this problem? Bye Matthias -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592327: libmime-tools-perl: Report-Type not supported? rfc3462
Package: libmime-tools-perl Version: 5.427-1 Severity: wishlist When generating incident reports using directions from rfc3462, there is a mandatory Report-Type= that has to be set. MIME::Entity misses support for this additinal element. -Benoit- -- System Information: Debian Release: 5.0.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.29.3 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=de_CH, LC_CTYPE=de_CH (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages libmime-tools-perl depends on: ii libconvert-binhex-perl 1.119+pristine-3 Perl5 module for extracting data f ii libio-stringy-perl 2.110-4 Perl modules for IO from scalars a ii libmailtools-perl 2.03-1 Manipulate email in perl programs ii perl5.10.0-19lenny2 Larry Wall's Practical Extraction ii perl-modules [libfile-t 5.10.0-19lenny2 Core Perl modules libmime-tools-perl recommends no packages. libmime-tools-perl suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592328: vzctl: /sbin/ip route get output for IPv6 addresses differs from its output for IPv4 addresses
Package: vzctl Version: 3.0.22-14 Severity: normal Tags: patch Hello there, the following upstream patch allows vz_get_neighbour_devs to yield the correct interface name when using IPv6 addresses: http://git.openvz.org/?p=vzctl;a=commitdiff;h=8d63c21bf22965510548ae2c5dbcb02fd0bbf874 This patch is included in upstream 3.0.24 as currently present in Squeeze/Sid. Do you see any chance of including this in Lenny as well, e.g. via proposed-updates and a point release? Full IPv6 support was, after all, a release goal for Lenny ... -- System Information: Debian Release: 5.0.5 APT prefers stable APT policy: (500, 'stable'), (1, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- Gruss / Best regards | LF.net GmbH| fon +49 711 90074-407 Florian Ernst | Ruppmannstrasse 27 | fax +49 711 90074-33 f...@lf.net | D-70565 Stuttgart | http://www.lf.net Handelsregister Stuttgart: HRB 18 189 Geschaeftsfuehrer: Norman Fuerst, Rodney Volz -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592329: RM: ntrack [kfreebsd-i386 kfreebsd-amd64] -- NPOASR; RM: ntrack [kfreebsd-i386 kfreebsd-amd64] -- NPOASR;
Package: ftp.debian.org Severity: normal also sent a mail to -release ... ntrack 006 by accident built for kfreebsd and now blocks 008 from entering testing ... please make soe that 008 can enter testing to fix the RC bug closed therein. - Alexander -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592330: [l10n:cs] Updated Czech translation of package po4a 0.40.1-1
Package: po4a Version: 0.40.1-1 Severity: wishlist Tags: l10n, patch In attachment there is updated Czech translation of package po4a (cs.po), please include it. -- Michal Šimůnek # Czech translation of po4a # This file is distributed under the same license as the po4a package. # Vlastimil Skacel, 2005. # Michal Simunek michal.simu...@gmail.com, 2009 - 2010. # msgid msgstr Project-Id-Version: po4a 0.40.1-1\n Report-Msgid-Bugs-To: p...@packages.debian.org\n POT-Creation-Date: 2010-07-31 12:34-0400\n PO-Revision-Date: 2010-08-09 10:31+0200\n Last-Translator: Michal Simunek michal.simu...@gmail.com\n Language-Team: Czech debian-l10n-cz...@lists.debian.org\n Language: cs\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Rosetta-Export-Date: 2007-08-12 16:08:46+\n #: ../../lib/Locale/Po4a/Chooser.pm:26 msgid Need to provide a module name msgstr Je potřeba zadat jméno modulu #: ../../lib/Locale/Po4a/Chooser.pm:47 #, perl-format msgid Unknown format type: %s. msgstr Neznámý formát: %s. #: ../../lib/Locale/Po4a/Chooser.pm:49 #, perl-format msgid Module loading error: %s msgstr Chyba při nahrávání modulu: %s #: ../../lib/Locale/Po4a/Chooser.pm:58 msgid List of valid formats: msgstr Seznam platných formátů: #. .\n - .gettext(bibtex: BibTex bibliography format.) #: ../../lib/Locale/Po4a/Chooser.pm:60 msgid dia: uncompressed Dia diagrams. msgstr dia: nekomprimované diagramy Dia. #: ../../lib/Locale/Po4a/Chooser.pm:61 msgid docbook: DocBook XML. msgstr docbook: XML DocBook. #: ../../lib/Locale/Po4a/Chooser.pm:62 msgid guide: Gentoo Linux's XML documentation format. msgstr guide: XML dokumentační formát Gentoo Linux. #. .\n - .gettext(html: HTML documents (EXPERIMENTAL).) #: ../../lib/Locale/Po4a/Chooser.pm:64 msgid ini: INI format. msgstr ini: formát INI. #: ../../lib/Locale/Po4a/Chooser.pm:65 msgid kernelhelp: Help messages of each kernel compilation option. msgstr kernelhelp: Nápověda pro každou z voleb při kompilaci kernelu. #: ../../lib/Locale/Po4a/Chooser.pm:66 msgid latex: LaTeX format. msgstr latex: formát LaTeX. #: ../../lib/Locale/Po4a/Chooser.pm:67 msgid man: Good old manual page format. msgstr man: starý dobrý formát manuálových stránek. #: ../../lib/Locale/Po4a/Chooser.pm:68 msgid pod: Perl Online Documentation format. msgstr pod: formát online dokumentace perlu (Perl Online Documentation). #: ../../lib/Locale/Po4a/Chooser.pm:69 msgid sgml: either DebianDoc or DocBook DTD. msgstr sgml: buď DebianDoc, nebo DocBook DTD. #: ../../lib/Locale/Po4a/Chooser.pm:70 msgid texinfo: The info page format. msgstr texinfo: formát informační stránky. #: ../../lib/Locale/Po4a/Chooser.pm:71 msgid tex: generic TeX documents (see also latex). msgstr tex: obecné dokumenty TeX (také latex). #: ../../lib/Locale/Po4a/Chooser.pm:72 msgid text: simple text document. msgstr text: prostý textový dokument. #: ../../lib/Locale/Po4a/Chooser.pm:73 msgid wml: WML documents. msgstr wml: dokumenty WML. #: ../../lib/Locale/Po4a/Chooser.pm:74 msgid xhtml: XHTML documents. msgstr xhtml: dokumenty XHTML. #: ../../lib/Locale/Po4a/Chooser.pm:75 msgid xml: generic XML documents (see also docbook). msgstr xml: obecné dokumenty XML (viz také docbook). #: ../../lib/Locale/Po4a/Common.pm:108 #, perl-format msgid %s version %s.\n written by Martin Quinson and Denis Barbier.\n \n Copyright (C) 2002, 2003, 2004 Software in the Public Interest, Inc.\n This is free software; see source code for copying\n conditions. There is NO warranty; not even for\n MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. msgstr %s. verze %s.\n vytvořili Martin Quinson a Denis Barbier.\n \n Copyright (c) 2002, 2003, 2004 Software in the Public Interest, Inc.\n Toto je svobodný software; informace o vytváření kopií naleznete \n ve zdrojovém kódu. Nejsou poskytovány ŽÁDNÉ záruky, a to ani na\n obchodovatelnost či vhodnost použití ke konkrétnímu účelu. #: ../../lib/Locale/Po4a/Debconf.pm:173 #, perl-format msgid Translated field in master document: %s msgstr Přeložené pole v hlavním dokumentu: %s #: ../../lib/Locale/Po4a/KernelHelp.pm:103 msgid Syntax error msgstr Syntaktická chyba #: ../../lib/Locale/Po4a/Man.pm:492 ../../lib/Locale/Po4a/Po.pm:161 #: ../../lib/Locale/Po4a/Sgml.pm:250 ../../lib/Locale/Po4a/TeX.pm:1637 #: ../../lib/Locale/Po4a/Text.pm:164 ../../lib/Locale/Po4a/Xml.pm:523 #, perl-format msgid Unknown option: %s msgstr Neznámá volba: %s #: ../../lib/Locale/Po4a/Man.pm:509 msgid Invalid 'groff_code' value. Must be one of 'fail', 'verbatim', 'translate'. msgstr Neplatná hodnota 'groff_code'. Parametr může nabývat hodnoty 'fail', 'verbatim' nebo 'translate'. #: ../../lib/Locale/Po4a/Man.pm:556 msgid The no_wrap parameters must be a set of comma-separated begin:end couples.\n msgstr Parametry no_wrap musí být množina čárkou oddělených párů začátek:konec.\n #: ../../lib/Locale/Po4a/Man.pm:602 msgid Invalid 'unknown_macros' value. Must be one of:\n msgstr Neplatná hodnota
Bug#592331: perl-doc: uninstallable/unupgradable
Package: perl-doc Version: 5.10.1-4 Severity: grave Justification: renders package unusable I did a dist-upgrade today. First corelist conflicted in perl, so I removed libmodule-corelist-perl to allow perl to upgrade. But something with perl-doc conflicted too, so I removed that as well. Now perl upgraded, but I can't install perl-doc anymore (seems perldoc is part of perl too?): $ sudo aptitude install perl-doc latex2html The following NEW packages will be installed: latex2html perl-doc 0 packages upgraded, 2 newly installed, 0 to remove and 604 not upgraded. Need to get 0B/9,305kB of archives. After unpacking 20.8MB will be used. Reading package fields... Done Reading package status... Done Retrieving bug reports... Done Parsing Found/Fixed information... Done Selecting previously deselected package perl-doc. (Reading database ... 552853 files and directories currently installed.) Unpacking perl-doc (from .../perl-doc_5.10.1-14_all.deb) ... Adding 'diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc' dpkg-divert: rename involves overwriting `/usr/bin/perldoc.stub' with different file `/usr/bin/perldoc', not allowed dpkg: error processing /var/cache/apt/archives/perl-doc_5.10.1-14_all.deb (--unpack): subprocess new pre-installation script returned error exit status 2 Selecting previously deselected package latex2html. Unpacking latex2html (from .../latex2html_2008-debian1-5_all.deb) ... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with dwww... Registering documents with scrollkeeper... Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/perl-doc_5.10.1-14_all.deb localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: dpkg: dependency problems prevent configuration of latex2html: latex2html depends on perl-doc; however: Package perl-doc is not installed. dpkg: error processing latex2html (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: latex2html Current status: 1 broken [+1]. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages perl-doc depends on: ii perl 5.10.1-14 Larry Wall's Practical Extraction perl-doc recommends no packages. Versions of packages perl-doc suggests: ii groff 1.20.1-10 GNU troff text-formatting system ii konqueror [man-browser] 4:4.4.4-1 KDE 4's advanced file manager, web ii man-db [man-browser] 2.5.7-3on-line manual pager -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#591648: bus error/segmentation fault on kfreebsd-*, hang on hppa
Hi. The failure might be related to Doxygen Release 1.7.0: Moved dot invocations to the end of a doxygen run. Doxygen will now run multiple instances of dot in parallel (for better CPU utilisation on multi-core systems). The new config option DOT_NUM_THREADS determines the number of threads used (were 0 is auto-detect). Petr -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592332: libmodule-corelist-perl: file conflict during upgrade
Package: libmodule-corelist-perl Version: 2.35-1 Severity: grave Justification: renders package unusable Tried to dist-upgrade today, but perl wouldn't upgrade due to a conflict with libmodule-corelist-perl. I removed libmodule-corelist-perl (and perl-doc too, opened separate bug for that), but now I can't install libmodule-corelist-perl back: sudo apt-get install libmodule-corelist-perl Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: libmodule-corelist-perl 0 upgraded, 1 newly installed, 0 to remove and 604 not upgraded. Need to get 0B/69.1kB of archives. After this operation, 922kB of additional disk space will be used. Reading package fields... Done Reading package status... Done Retrieving bug reports... Done Parsing Found/Fixed information... Done Selecting previously deselected package libmodule-corelist-perl. (Reading database ... 552853 files and directories currently installed.) Unpacking libmodule-corelist-perl (from .../libmodule-corelist-perl_2.36-1_all.deb) ... Adding 'diversion of /usr/bin/corelist to /usr/bin/corelist.bundled by libmodule-corelist-perl' dpkg-divert: rename involves overwriting `/usr/bin/corelist.bundled' with different file `/usr/bin/corelist', not allowed dpkg: error processing /var/cache/apt/archives/libmodule-corelist-perl_2.36-1_all.deb (--unpack): subprocess new pre-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/libmodule-corelist-perl_2.36-1_all.deb -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libmodule-corelist-perl depends on: ii perl 5.10.1-14 Larry Wall's Practical Extraction ii perl-modules [libversion-perl 5.10.1-14 Core Perl modules libmodule-corelist-perl recommends no packages. libmodule-corelist-perl suggests no packages. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#579264: tracker-miner-evolution: E-mails never appear in search results, spurious console output
Package: tracker-miner-evolution Version: 0.8.15-1 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I also suffer from a similar problem. While the tracker-status-icon shows email are indexed at 100%, I cannot see any email in the search results. The plugin is always shown as initializing: $ LANG=C tracker-status Store: ? Journal replay- Idle Miners: ? File System - Idle ? Applications - Idle ? Emails- Initializing Note that I only use IMAPs, no local email, which might be related. This bug priority should be changed to important if more people have the same issue, as it makes the package useless. Cheers, Julien - -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (100, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35-trunk-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages tracker-miner-evolution depends on: ii libart-2.0-22.3.21-1 Library of functions for 2D graphi ii libatk1.0-0 1.30.0-1 The ATK accessibility toolkit ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcairo2 1.8.10-4 The Cairo 2D vector graphics libra ii libcamel1.2-14 2.30.2.1-1 The Evolution MIME message handlin ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst ii libdbus-glib-1-20.86-1 simple interprocess messaging syst ii libedataserver1.2-132.30.2.1-1 Utility library for evolution data ii libenchant1c2a 1.6.0-1 a wrapper library for various spel ii libevolution2.30.2-1 evolution libraries ii libfontconfig1 2.8.0-2.1generic font configuration library ii libfreetype62.4.0-2 FreeType 2 font engine, shared lib ii libgconf2-4 2.28.1-3 GNOME configuration database syste ii libglib2.0-02.25.13-1The GLib library of C routines ii libgnomecanvas2-0 2.30.1-1 A powerful object-oriented display ii libgtk2.0-0 2.21.5-1 The GTK+ graphical user interface ii libgtkhtml-editor0 3.30.2-1 HTML rendering/editing library - e ii libgtkhtml3.14-19 3.30.2-1 HTML rendering/editing library - r ii libnspr4-0d 4.8.6-1 NetScape Portable Runtime Library ii libnss3-1d 3.12.7-1 Network Security Service libraries ii libpango1.0-0 1.28.1-1 Layout and rendering of internatio ii libsoup2.4-12.30.2-1 an HTTP library implementation in ii libsqlite3-03.7.0-1.1SQLite 3 shared library ii libtracker-client-0.8-0 0.8.15-1 metadata database, indexer and sea ii libtracker-miner-0.8-0 0.8.15-1 tracker data miner library ii libunique-1.0-0 1.1.6-1 Library for writing single instanc ii libxml2 2.7.7.dfsg-4 GNOME XML library ii tracker 0.8.15-1 metadata database, indexer and sea tracker-miner-evolution recommends no packages. tracker-miner-evolution suggests no packages. - -- no debconf information -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iEYEARECAAYFAkxf13oACgkQIQvyq59x1EmN4QCeLkBkdqlJk/eUdw9W+p5+qjv3 k94AnRMHj9879t9/39UHWDouQi24ChTI =jV5H -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592187: Bug#576838: virtio network crashes again
Okay, next round: This time, 2.6.32-19 and virtio in guest, 2.6.32-18 in the host and sadly, it's not fixed: [ 159.772700] rdiff-backup.bi: page allocation failure. order:0, mode:0x20 [ 159.772708] Pid: 2524, comm: rdiff-backup.bi Not tainted 2.6.32-5-amd64 #1 [ 159.772710] Call Trace: [ 159.772712] IRQ [810b8b6f] ? __alloc_pages_nodemask+0x55b/0x5d0 [ 159.772759] [81245b2c] ? __alloc_skb+0x69/0x15a [ 159.772779] [a0202e52] ? try_fill_recv+0x8b/0x18b [virtio_net] [ 159.772784] [a02038c6] ? virtnet_poll+0x543/0x5c9 [virtio_net] [ 159.772799] [8124cc4b] ? net_rx_action+0xae/0x1c9 [ 159.772817] [8105274d] ? __do_softirq+0xdd/0x1a0 [ 159.772829] [a0202153] ? skb_recv_done+0x28/0x34 [virtio_net] [ 159.772838] [81011cac] ? call_softirq+0x1c/0x30 [ 159.772843] [81013207] ? do_softirq+0x3f/0x7c [ 159.772845] [810525bc] ? irq_exit+0x36/0x76 [ 159.772847] [810128fe] ? do_IRQ+0xa0/0xb6 [ 159.772850] [810114d3] ? ret_from_intr+0x0/0x11 [ 159.772851] EOI [81242beb] ? kmap_skb_frag+0x3/0x43 [ 159.772856] [81243b2d] ? skb_checksum+0xfa/0x23f [ 159.772858] [8124726d] ? __skb_checksum_complete_head+0x15/0x55 [ 159.772868] [81282d4f] ? tcp_checksum_complete_user+0x1f/0x3c [ 159.772870] [812835dd] ? tcp_rcv_established+0x3c5/0x6d9 [ 159.772875] [8128a87b] ? tcp_v4_do_rcv+0x1bb/0x376 [ 159.772877] [812876e8] ? tcp_write_xmit+0x883/0x96c [ 159.772880] [81240ac1] ? release_sock+0x46/0x96 [ 159.772882] [8127ca05] ? tcp_sendmsg+0x78a/0x87e [ 159.772885] [8123e515] ? sock_sendmsg+0xa3/0xbb [ 159.772894] [8106386e] ? autoremove_wake_function+0x0/0x2e [ 159.772902] [810c5b9c] ? zone_statistics+0x3c/0x5d [ 159.772906] [8104085f] ? pick_next_task_fair+0xcd/0xd8 [ 159.772919] [8123e814] ? kernel_sendmsg+0x32/0x3f [ 159.772943] [a02acca6] ? xs_send_kvec+0x78/0x7f [sunrpc] [ 159.772948] [a02acd36] ? xs_sendpages+0x89/0x1a1 [sunrpc] [ 159.772953] [a02acf43] ? xs_tcp_send_request+0x44/0x131 [sunrpc] [ 159.772961] [a02ab263] ? xprt_transmit+0x17b/0x25a [sunrpc] [ 159.772996] [f[ 340.048248] serial8250: too much work for irq4 fffa033af51] ? nfs3_xdr_readargs+0x7a/0x89 [nfs] [ 159.773000] [a02a8c14] ? call_transmit+0x1fb/0x246 [sunrpc] [ 159.773009] [a02af2ab] ? __rpc_execute+0x7d/0x24d [sunrpc] [ 159.773032] [a02a94d4] ? rpc_run_task+0x53/0x5b [sunrpc] [ 159.773042] [a0334844] ? nfs_read_rpcsetup+0x1d2/0x1f4 [nfs] [ 159.773048] [a03344b5] ? readpage_async_filler+0x0/0xbf [nfs] [ 159.773061] [a0332c14] ? nfs_pageio_doio+0x2a/0x51 [nfs] [ 159.773067] [a0332d00] ? nfs_pageio_add_request+0xc5/0xd5 [nfs] [ 159.773072] [a0334532] ? readpage_async_filler+0x7d/0xbf [nfs] [ 159.773076] [810ba59c] ? read_cache_pages+0x91/0x105 [ 159.773082] [a033430a] ? nfs_readpages+0x155/0x1b4 [nfs] [ 159.773087] [a0334be0] ? nfs_pagein_one+0x0/0xd0 [nfs] [ 159.773092] [81046ccf] ? finish_task_switch+0x3a/0xaf [ 159.773094] [810ba0b9] ? __do_page_cache_readahead+0x11b/0x1b4 [ 159.773097] [810ba16e] ? ra_submit+0x1c/0x20 [ 159.773099] [810ba45d] ? page_cache_async_readahead+0x75/0xad [ 159.773109] [810b3c82] ? generic_file_aio_read+0x23a/0x52b [ 159.773118] [810ecdc9] ? do_sync_read+0xce/0x113 [ 159.773124] [8100f79c] ? __switch_to+0x285/0x297 [ 159.773126] [8106386e] ? autoremove_wake_function+0x0/0x2e [ 159.773129] [81046ccf] ? finish_task_switch+0x3a/0xaf [ 159.773131] [810ed812] ? vfs_read+0xa6/0xff [ 159.773133] [810ed927] ? sys_read+0x45/0x6e [ 159.773136] [81010b42] ? system_call_fastpath+0x16/0x1b [ 159.773138] Mem-Info: [ 159.773139] Node 0 DMA per-cpu: [ 159.773141] CPU0: hi:0, btch: 1 usd: 0 [ 159.773143] CPU1: hi:0, btch: 1 usd: 0 [ 159.773144] Node 0 DMA32 per-cpu: [ 159.773146] CPU0: hi: 186, btch: 31 usd: 184 [ 159.773147] CPU1: hi: 186, btch: 31 usd: 39 [ 159.773151] active_anon:5153 inactive_anon:2765 isolated_anon:0 [ 159.773152] active_file:17029 inactive_file:65343 isolated_file:0 [ 159.773153] unevictable:0 dirty:8266 writeback:0 unstable:443 [ 159.773154] free:787 slab_reclaimable:25621 slab_unreclaimable:3017 [ 159.773154] mapped:1946 shmem:238 pagetables:921 bounce:0 [ 159.773156] Node 0 DMA free:1992kB min:84kB low:104kB high:124kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:3276kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15372kB mlocked:0kB dirty:1232kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:60kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB
Bug#591673: movabletype-plugin-core: zemanta content recommendations on by default?
On Wed, Aug 04, 2010 at 05:53:17PM +0200, Jozef Kutej wrote: It looks to me as that the Zemanta plugin that is suggesting content is sending the text of the blog posts to their service. This plugin is *enabled* by default and it was activated only via upgrading. While not everyone uses MovableType just for public texts I find it really not a good choice and as a security problem in a default configuration. Thanks for pointing this out. It had been mentioned before as a problem but I hadn't fully appreciated that it was sending the content out. I think the best thing to do at this stage is probably to split out the Zemanta plugin into a separate package (with a clear warning about what it does) in order to avoid the risk of delving into the code and making configuration changes deviating from upstream at this stage. Release team, would you approve a new package on this basis? Thanks, Dominic. -- Dominic Hargreaves | http://www.larted.org.uk/~dom/ PGP key 5178E2A5 from the.earth.li (keyserver,web,email) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592333: 802.1Q: kernel panic/Oops when changing eth0.10'state to up if eth0 is up but nothing is plugged in
Package: iproute Version: 20100519-3 Severity: normal Hello, As the title say the bug only happend for me when nothing is plugged in eth0 but eth0 is up Steps to reproduce it: 1) unplugged the cable 2) ip l s eth0 up 3) ip l a l eth0 eth0.10 type vlan id 10 4) ip l s eth0.10 up The following is part of the kernel oops message, I do not always get the same message, so I'm not sure they are all related to this problem: | BUG: scheduling while atomic: swapper/0/0x1100 or | BUG: unable to handle kernel paging request at 2e | IP: [...] ip6_output +0xce/0xb23 | pdt: ... x pde = 0...000 | Oops: [#1] SMP | last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNPA03:00/PNP0C0A:00/power_supply/BAT0/energy_full or | Warning: at /build/buildd-linux-2.6+2.6.32-15-i386-fb7Hfg/linux-2.6-2.6.32/debian/build/source_i386_none/arch/x86/kernel/smp.c:17 resched_task | Hardware name T12UV then on every message: | Modules linked in: 802.1q garp stp ext2 loop arc4.. (continues on several lines) Thank you for your work samLT -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages iproute depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libdb4.8 4.8.26-1 Berkeley v4.8 Database Libraries [ Versions of packages iproute recommends: pn libatm1 none (no description available) Versions of packages iproute suggests: pn iproute-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592334: cclive stopped working (fails on 404 error)
Package: cclive Version: 0.6.3-1 Severity: grave Hi, cclive recently stopped downloading all videos. What it gives me is: $ cclive http://www.youtube.com/watch?v=VIDEO; fetch config ...done. verify video link ...error: libquvi: server returned http/404 Is it suitable to be released with squeeze, in this state? Thanks, Guido -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.35rx00 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages cclive depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcurl3-gnutls 7.21.0-1 Multi-protocol file transfer libra ii libgcc1 1:4.4.4-7 GCC support library ii libpcre3 7.8-3 Perl 5 Compatible Regular Expressi ii libpcrecpp0 7.8-3 Perl 5 Compatible Regular Expressi ii libquvi0 0.2.0-1library for parsing video download ii libstdc++64.4.4-7The GNU Standard C++ Library v3 cclive recommends no packages. cclive suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592331: Acknowledgement (perl-doc: uninstallable/unupgradable)
severity 499096 grave merge 499096 592331 thanks Looks like my report is similar to #499096, attempting to merge them. Looking at /var/lib/dpkg/diversions I see that it is empty. Is that normal ?! Or did some buggy package maintainer script wipe it? I'm sending you the dpkg logs privately. Best regards, --Edwin -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#590462: video-radeon: gdb back trace
Package: xserver-xorg-video-radeon Followup-For: Bug #590462 Sending a backtrace. It is different from the previous one but seems to match the X log. Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7f24ee813700 (LWP 15761)] 0x7f24ead46424 in DRI2CopyRegion (pDraw=0x348e5e0, pRegion=0x7fff0ef29ef0, dest=7, src=0) at ../../../../hw/xfree86/dri2/dri2.c:328 328 ../../../../hw/xfree86/dri2/dri2.c: No such file or directory. in ../../../../hw/xfree86/dri2/dri2.c (gdb) bt #0 0x7f24ead46424 in DRI2CopyRegion (pDraw=0x348e5e0, pRegion=0x7fff0ef29ef0, dest=7, src=0) at ../../../../hw/xfree86/dri2/dri2.c:328 #1 0x7f24ead4682b in do_get_buffers (pDraw=0x348e5e0, width=value optimized out, height=value optimized out, attachments=0x2, count=value optimized out, out_count=value optimized out, has_format=1) at ../../../../hw/xfree86/dri2/dri2.c:288 #2 0x7f24ead468a0 in DRI2GetBuffersWithFormat (pDraw=0x0, width=0x0, height=0x0, attachments=0x3476850, count=16, out_count=0x2da2970) at ../../../../hw/xfree86/dri2/dri2.c:307 #3 0x7f24ead4707e in ProcDRI2Dispatch (client=0x29a6600) at ../../../../hw/xfree86/dri2/dri2ext.c:287 #4 0x00448db4 in Dispatch () at ../../dix/dispatch.c:439 #5 0x00425b8a in main (argc=6, argv=0x7d8448, envp=value optimized out) at ../../dix/main.c:285 (gdb) bt full #0 0x7f24ead46424 in DRI2CopyRegion (pDraw=0x348e5e0, pRegion=0x7fff0ef29ef0, dest=7, src=0) at ../../../../hw/xfree86/dri2/dri2.c:328 pPriv = value optimized out pDestBuffer = (DRI2BufferPtr) 0x0 pSrcBuffer = (DRI2BufferPtr) 0x3476850 #1 0x7f24ead4682b in do_get_buffers (pDraw=0x348e5e0, width=value optimized out, height=value optimized out, attachments=0x2, count=value optimized out, out_count=value optimized out, has_format=1) at ../../../../hw/xfree86/dri2/dri2.c:288 region = {extents = {x1 = 0, y1 = 0, x2 = 375, y2 = 30903}, data = 0x0} pPriv = (DRI2DrawablePtr) 0x2e5a400 buffers = (DRI2BufferPtr *) 0x2da2970 need_real_front = -1 need_fake_front = 1 have_fake_front = 1 front_format = 32 dimensions_match = 0 i = 2 #2 0x7f24ead468a0 in DRI2GetBuffersWithFormat (pDraw=0x0, width=0x0, height=0x0, attachments=0x3476850, count=16, out_count=0x2da2970) at ../../../../hw/xfree86/dri2/dri2.c:307 No locals. #3 0x7f24ead4707e in ProcDRI2Dispatch (client=0x29a6600) at ../../../../hw/xfree86/dri2/dri2ext.c:287 stuff = value optimized out #4 0x00448db4 in Dispatch () at ../../dix/dispatch.c:439 result = value optimized out client = (ClientPtr) 0x29a6600 nready = 0 start_tick = 67000 #5 0x00425b8a in main (argc=6, argv=0x7d8448, envp=value optimized out) at ../../dix/main.c:285 i = 1 alwaysCheckForInput = {0, 1} -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592335: RFP: gpgstats -- GPGstats calculates statistics on the keys in your key-ring.
Package: wnpp Severity: wishlist * Package name: gpgstats Version : 0.5 Upstream Author : Folkert van Heusden folk...@vanheusden.com * URL : http://www.vanheusden.com/gpgstats/ * License : GPL2 Programming Lang: C++ Description : GPGstats calculates statistics on the keys in your key-ring. GPGstats calculates statistics on the keys in your key-ring. Some of the calculated data is: * oldest key * newest key * most used key-length (in bits) * most used algorithm * domain with the most keys * tld with the most keys * what day/month/year were the most keys generated * statistics on revoked and expired keys, their average age, etc. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#569788: A possible patch
tag 569788 + patch thanks I think the attached patch should fix this issue. It's working for me: I'm attaching the test case I'm using (it's a modification on an example provided within the package). Using the package in unstable: [12:30] giova...@edelstein:~/packages/openraw/test$ gcc `pkg-config --cflags --libs libopenraw-1.0` -g -o thumb thumbc.c [12:30] giova...@edelstein:~/packages/openraw/test$ ./thumb ../p1080081.orf registering type 1 registering type 3 registering type 5 registering type 7 registering type 6 registering type 8 registering type 2 registering type 9 registering type 4 factory size 9 getRawData() _locateDirs() Identified ORF file push offset =0x8 numEntries =21 shifting 254bytes # dir found = 1 IFDDir::load() m_offset =8 counting tiles RAW Compression is 1 _getCfaPattern IFDDir::load() m_offset =8 Exif IFD offset (uncorrected) = 266 Exif IFD offset = 266 IFDDir::load() m_offset =266 _getCfaPattern patter is = 0, 1, 1, 2 allocate s=9619532 data =0 data =0x7fd5e5b76010 allocate s=31248000 data =0 data =0x7fd5e3da9010 Segmentation fault Using the patched version: [12:36] giova...@edelstein:~/packages/openraw/test$ gcc `pkg-config --cflags --libs libopenraw-1.0` -g -o thumb thumbc.c [12:37] giova...@edelstein:~/packages/openraw/test$ ./thumb ../p1080081.orf registering type 1 registering type 3 registering type 5 registering type 7 registering type 6 registering type 8 registering type 2 registering type 9 registering type 4 factory size 9 options are 0 getRawData() _locateDirs() Identified ORF file push offset =0x8 numEntries =21 shifting 254bytes # dir found = 1 IFDDir::load() m_offset =8 counting tiles RAW Compression is 1 _getCfaPattern IFDDir::load() m_offset =8 Exif IFD offset (uncorrected) = 266 Exif IFD offset = 266 IFDDir::load() m_offset =266 _getCfaPattern patter is = 0, 1, 1, 2 allocate s=9619532 data =0 data =0x7fbd8adcb010 wrong data type error 7 The program still fails (my understanding is that it's not able to read the compressed ORF file), but at least it fails gracefully instead of segfaulting. I'm not NMU-ing this patch because I'll be VAC and not reachable starting Thursday or Friday. Ciao, Giovanni. -- Giovanni Mascellani mascell...@poisson.phc.unipi.it Pisa, Italy Web: http://poisson.phc.unipi.it/~mascellani Jabber: g.mascell...@jabber.org / giova...@elabor.homelinux.org From ca456c292e1c311d8fb0eed12a440813facb3f20 Mon Sep 17 00:00:00 2001 From: Giovanni Mascellani mascell...@poisson.phc.unipi.it Date: Mon, 9 Aug 2010 12:28:56 +0200 Subject: [PATCH] Fix segmentation fault for some compressed ORF files --- README |4 ++-- debian/changelog|7 +++ lib/orffile.cpp | 33 + lib/rawfile.cpp |7 ++- testsuite/testsuite.xml | 36 5 files changed, 80 insertions(+), 7 deletions(-) diff --git a/README b/README index b4716ee..620e556 100644 --- a/README +++ b/README @@ -114,9 +114,9 @@ Olympus ORF Y Y N Y Y Y E-10B B T E-3 T T T E-300 T T B T T T - E-330 T T T + E-330 T T N T E-400 T B T T - E-410 B T T T + E-410 B T N T T E-500 T T T T E-510 B T T T SP-350 diff --git a/debian/changelog b/debian/changelog index 59f5774..06abd44 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,10 @@ +libopenraw (0.0.8-1.1) unstable; urgency=low + + * Non-maintainer upload. + * Fix segmentation fault with some ORF files (closes: #569788). + + -- Giovanni Mascellani g...@debian.org Mon, 09 Aug 2010 12:32:02 +0200 + libopenraw (0.0.8-1) unstable; urgency=low * New upstream version diff --git a/lib/orffile.cpp b/lib/orffile.cpp index c9f0181..28980f4 100644 --- a/lib/orffile.cpp +++ b/lib/orffile.cpp @@ -1,7 +1,7 @@ /* * libopenraw - orffile.cpp * - * Copyright (C) 2006, 2008 Hubert Figuiere + * Copyright (C) 2006, 2008, 2010 Hubert Figuiere * * This library is free software: you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public License @@ -77,7 +77,7 @@ namespace OpenRaw { IFDDir::Ref ORFFile::_locateCfaIfd() { - // in PEF the CFA IFD is the main IFD + // in ORF the CFA IFD is the main IFD if(!m_mainIfd) { m_mainIfd = _locateMainIfd(); } @@ -92,12 +92,37 @@ namespace OpenRaw { - ::or_error ORFFile::_getRawData(RawData data, uint32_t /*options*/) + ::or_error ORFFile::_getRawData(RawData data, uint32_t options) { + ::or_error err; if(!m_cfaIfd) { m_cfaIfd = _locateCfaIfd(); } - return _getRawDataFromDir(data, m_cfaIfd); + err = _getRawDataFromDir(data, m_cfaIfd); + if(err == OR_ERROR_NONE) { +//
Bug#592336: agtl: Inappropriately appears in USC's Python section but not Geography
Package: agtl Version: 0.5.1-2 Severity: minor Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu maverick ubuntu-patch Bug first reported in Ubuntu by Matthew Paul Thomas: https://bugs.launchpad.net/ubuntu/+source/agtl/+bug/546945 In Ubuntu, all updates installed 1. In Ubuntu Software Center, select View All Software. 2. Navigate to Get Software Developer Tools Python. 3. Navigate to Get Software Science Engineering Geography. What happens: 2. AdvancedCaching is first in the Python list. 3. AdvancedCaching is not in the Geography list at all. What should happen: 2. AdvancedCaching is not in the Python list at all. 2. AdvancedCaching is first in the Geography list. This is because the agtl package has Section: universe/python, which it should not, and its .desktop file does not say that it's in the Geography category. ** Attaching a patch which switches the section from python to misc and adds a category Geograhy to the .desktop file. Kindly apply the patch. *** /tmp/tmpikW7iv * debian/control: Switch section from python to misc * Add category Geography to .desktop -- System Information: Debian Release: squeeze/sid APT prefers lucid-updates APT policy: (900, 'lucid-updates'), (900, 'lucid-security'), (600, 'lucid') Architecture: i386 (i686) Kernel: Linux 2.6.35-020635rc6-generic (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash diff -u agtl-0.5.1/debian/control agtl-0.5.1/debian/control --- agtl-0.5.1/debian/control +++ agtl-0.5.1/debian/control @@ -1,5 +1,5 @@ Source: agtl -Section: python +Section: misc Priority: extra Maintainer: Heiko Stuebner he...@sntech.de DM-Upload-Allowed: yes diff -u agtl-0.5.1/debian/changelog agtl-0.5.1/debian/changelog only in patch2: unchanged: --- agtl-0.5.1.orig/files/advancedcaching.desktop +++ agtl-0.5.1/files/advancedcaching.desktop @@ -8,7 +8,7 @@ Exec=agtl --simple Icon=advancedcaching Terminal=false -Categories=Office; +Categories=Office;Geography; SingleInstance=true StartupNotify=true Comment[de_DE.UTF-8]=An Advanced Linux Geocaching tool
Bug#588739: QEMU 0.12.5 is out
27.07.2010 17:41, Laurent Léonard wrote: QEMU 0.12.5 is out and the issue seems to be fixed upstream, so please update qemu-kvm to 0.12.5. Yes, qemu-kvm 0.12.5 is out, but it does _not_ include fix for this bug, and while the patch you mentioned initially -- http://lists.gnu.org/archive/html/qemu-devel/2010-07/msg00152.html appears to fix the problem, it does not apply to stable 0.12 series. 0.12 contains another bug related to this which is - apparently - still present in 0.13 too, -- https://bugs.launchpad.net/qemu/+bug/586175 JFYI. I'll consider backporting the fix to 0.12, but don't hold your breath, it wont be today. Also, I'll wait for LP#586175 to be fixed too before the next upload. Thanks! /mjt -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592337: Invalid local package source suggestions
Package: software-properties-gtk Version: 0.60.debian-1.1 If user tries to use local server (Download From: Server for Lithuania), software-properties-gtk 0.60.debian-1.1 (squeeze/testing) updates /etc/apt/sources.list to use ftp.lt.debian.org. Debian does not have DNS records for localized servers. IMHO Ubuntu feature incorrectly used in Debian package or appropriate DNS entries are not set in debian.org zone. If I choose Download From: Other, both Lithuanian mirrors are listed there. From /etc/apt/sources.list deb http://ftp.lt.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.lt.debian.org/debian/ squeeze main contrib non-free #Added by software-properties DNS checks to...@miri:~$ host ftp.lt.debian.org Host ftp.lt.debian.org not found: 3(NXDOMAIN) to...@miri:~$ host lt.archive.ubuntu.com lt.archive.ubuntu.com is an alias for ftp.litnet.lt. ftp.litnet.lt has address 193.219.61.67 ftp.litnet.lt has IPv6 address 2001:778::a -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592338: swt-gtk: Version 3.6
Package: swt-gtk Severity: wishlist Hi! It seems that some display bugs in the application tuxguitar can probably be fixed by upgrading to SWT v3.6. Hence this wishlist report. In particular, tuxguitar depends on libswt-gtk-3.5-java libswt-cairo-gtk-3.5-jni libswt-mozilla-gtk-3.5-jni Best regards Torquil Sørensen -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592339: svn-buildpackage: origUrl doesn't work properly with bzip2 tarball
Package: svn-buildpackage Version: 0.8.1 Severity: normal When svn-buildpackage downloads the tarball designated by origUrl property, it renames it to *.orig.tar.gz and the build fails. I have to rename the tarball to *.orig.tar.bz2 to get it build. It happens for instance with pingus: svn://svn.debian.org/svn/pkg-games/packages/trunk/pingus/ Regards, Bertrand -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages svn-buildpackage depends on: ii devscripts 2.10.65.1scripts to make the life of a Debi ii file5.04-4 Determines file type using magic ii libcapture-tiny-perl0.08-1 module to capture STDOUT and STDER ii libfile-libmagic-perl 0.96-1 Perl interface to libmagic for det ii liblocale-gettext-perl 1.05-6 Using libc functions for internati ii libsvn-perl 1.6.12dfsg-1 Perl bindings for Subversion ii liburi-perl 1.54-1 module to manipulate and access UR ii perl5.10.1-13Larry Wall's Practical Extraction ii subversion 1.6.12dfsg-1 Advanced version control system ii unp 2.0~pre4 unpack (almost) everything with on ii wget1.12-2 retrieves files from the web Versions of packages svn-buildpackage recommends: ii debhelper 7.9.3 helper programs for debian/rules svn-buildpackage suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#554909: ftp.pl.debian.org via IPv6
Hi! About IPv6. Today I got IP special for debian: 2001:4070:1::fafb (ftp.pl.debian.org) I will set it up and test tomorrow. About method of sync: I'am doing it by my own scripts using rsync. regards, Michal. On Sun, 8 Aug 2010 17:59:19 +0200, Simon Paillard simon.paill...@resel.enst-bretagne.fr wrote: Hi, On Sat, Nov 07, 2009 at 12:22:27PM +0100, Simon Paillard wrote: Dear ftp.pl.debian.org admins, Any news regarding this question (IPv6 access confirmed ?) and request (ftpsync upgrade) ? On Fri, Nov 06, 2009 at 10:45:38PM +0100, Simon Paillard wrote: On Fri, Nov 06, 2009 at 10:25:45AM +0100, Tomasz Pawelczak wrote: ftp.pl.debian.org is accesible via 2001:4070:1::fafa, please add for this domain. Thanks for the notice. I though Tomasz was from ftp.pl team. Could you please give us feedback regarding this ? I suggest moving ftp.pl.debian.org to a CNAME ftp.task.gda.pl (though ftp.pl.debian.org currently resolves to 153.19.251.221 while ftp.task.gda.pl to .222). Or create a debian.task.gda.pl A 153.19.251.221 ? By the way, could you please switch to the recommended tool: ftpsync http://debian.org/mirror/ftpmirror#how which ensures mirror consistency even during the mirror updates. Thanks for mirroring Debian, -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592340: netscript-2.4: Missing quotes prevent eth0_IF_CHAIN_AUTO from handling more than one interface.
Package: netscript-2.4 Severity: important Only one interface can be specified in the string, when it should handle many. This can prevent networking from coming up correctly, possibly rendering parts of network unreachable. I am the DD and upstream author of this package. This is a bug I discovered while at work. Fix is just adding quotes in the correct places. A patch is included for reference. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=en_NZ.utf8, LC_CTYPE=en_NZ.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592341: aptitude: debsums takes 3 minutes CPU time when packages added or removed
Package: aptitude Version: 0.6.3-3 Severity: normal Hi, after discovering a corrupt package on my system, someone recommended installing debsums. However, on this machine, a PII-266, debsums takes 3 minutes of CPU time every time any package is added, removed or updated using aptitude. Should debsums be taking so long when called by aptitude? -- Package-specific info: aptitude 0.6.3 compiled at Jul 10 2010 21:52:22 Compiler: g++ 4.4.4 Compiled against: apt version 4.8.0 NCurses version 5.7 libsigc++ version: 2.2.4.2 Ept support enabled. Gtk+ support disabled. Current library versions: NCurses version: ncurses 5.7.20100313 cwidget version: 0.5.16 Apt version: 4.8.0 linux-gate.so.1 = (0xb77fa000) libapt-pkg-libc6.9-6.so.4.8 = /usr/lib/libapt-pkg-libc6.9-6.so.4.8 (0x410aa000) libncursesw.so.5 = /lib/libncursesw.so.5 (0x41214000) libsigc-2.0.so.0 = /usr/lib/libsigc-2.0.so.0 (0x41052000) libcwidget.so.3 = /usr/lib/libcwidget.so.3 (0x413b) libept.so.1 = /usr/lib/libept.so.1 (0x41171000) libxapian.so.15 = /usr/lib/libxapian.so.15 (0x4125c000) libz.so.1 = /usr/lib/libz.so.1 (0x420f9000) libsqlite3.so.0 = /usr/lib/libsqlite3.so.0 (0x43f7a000) libboost_iostreams.so.1.42.0 = /usr/lib/libboost_iostreams.so.1.42.0 (0x4101f000) libpthread.so.0 = /lib/i686/cmov/libpthread.so.0 (0x420de000) libstdc++.so.6 = /usr/lib/libstdc++.so.6 (0x4224e000) libm.so.6 = /lib/i686/cmov/libm.so.6 (0x420b) libgcc_s.so.1 = /lib/libgcc_s.so.1 (0x4222e000) libc.so.6 = /lib/i686/cmov/libc.so.6 (0x41f67000) libutil.so.1 = /lib/i686/cmov/libutil.so.1 (0x41d1f000) libdl.so.2 = /lib/i686/cmov/libdl.so.2 (0x420d8000) libbz2.so.1.0 = /lib/libbz2.so.1.0 (0x42e25000) librt.so.1 = /lib/i686/cmov/librt.so.1 (0x41e5f000) /lib/ld-linux.so.2 (0x4100) Terminal: xterm $DISPLAY is set. `which aptitude`: /usr/bin/aptitude aptitude version information: aptitude linkage: -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.35 (SMP w/1 CPU core; PREEMPT) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages aptitude depends on: ii apt [libapt-pkg-libc6.9 0.7.25.3 Advanced front-end for dpkg ii libboost-iostreams1.42. 1.42.0-4 Boost.Iostreams Library ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libcwidget3 0.5.16-3 high-level terminal interface libr ii libept1 1.0.3High-level library for managing De ii libgcc1 1:4.4.4-8GCC support library ii libncursesw55.7+20100313-2 shared libraries for terminal hand ii libsigc++-2.0-0c2a 2.2.4.2-1type-safe Signal Framework for C++ ii libsqlite3-03.7.0-1.1SQLite 3 shared library ii libstdc++6 4.4.4-8 The GNU Standard C++ Library v3 ii libxapian15 1.0.20-2 Search engine library ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages aptitude recommends: ii apt-xapian-index 0.38 maintenance tools for a Xapian ind ii aptitude-doc-en [aptitude-doc 0.6.3-3English manual for aptitude, a ter ii libparse-debianchangelog-perl 1.1.1-2.1 parse Debian changelogs and output ii sensible-utils0.0.4 Utilities for sensible alternative Versions of packages aptitude suggests: pn debtags none (no description available) pn tasksel none (no description available) -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#489613: openafs-modules-source: attempt to reinsert module results in Cannot allocate memory
FWIW, my Debian stable machine just started exhibiting this problem after months of perfect operation; persisted across reboots too. Switching to the 1.4.12.1+dfsg-2~bpo50+1 openafs suite in lenny-backports appears to have resolved it. uname -a: Linux ... 2.6.26-2-686 #1 SMP Mon Jun 21 05:58:44 UTC 2010 i686 GNU/Linux Thanks for the suggestion! Conrad -- The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592340: Patch for bug
here's the patch for reference -- Show where the quotes are missing. --- netscript 2009-12-21 09:26:18 + +++ netscript 2010-07-29 00:30:30 + @@ -941,7 +941,7 @@ return 0 ;; esac - eval local IF_CHAIN_AUTO=\${$1_IF_CHAIN_AUTO:-} + eval local IF_CHAIN_AUTO=\\${$1_IF_CHAIN_AUTO:-}\ if_up $1 vb echo -n $1 for IF in $IF_CHAIN_AUTO; do if_up $IF vb echo -n $IF @@ -969,8 +969,8 @@ ;; esac local REV_IF_CHAIN - eval local IF_CHAIN=\${$1_IF_CHAIN:-} - eval local IF_CHAIN_AUTO=\${$1_IF_CHAIN_AUTO:-} + eval local IF_CHAIN=\\${$1_IF_CHAIN:-}\ + eval local IF_CHAIN_AUTO=\\${$1_IF_CHAIN_AUTO:-}\ IF_CHAIN=$IF_CHAIN_AUTO $IF_CHAIN for IF in $IF_CHAIN; do REV_IF_CHAIN=$REV_IF_CHAIN $IF signature.asc Description: This is a digitally signed message part
Bug#592342: llvm-2.7: man page inconsistency for llvm-gcc
Package: llvm-2.7 Version: 2.7-4 Severity: normal If one wants to read the man page for llvm-gcc, one needs to type: man llvmgcc-2.7 instead of man llvm-gcc This is a first inconsistency. A second inconsistency is that the man page says in its header: LLVMGCC(1), which is different from llvmgcc-2.7 and llvm-gcc. Also, this is the llvm-gcc-4.2 package that provides /usr/bin/llvm-gcc. This means that if llvm-2.7 is installed, but not llvm-gcc-4.2, one can get a man page for something that doesn't exist. I suppose that this man page should be moved to the llvm-gcc-4.2 package. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores) Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages llvm-2.7 depends on: ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libffi5 3.0.9-2Foreign Function Interface library ii libgcc1 1:4.4.4-8 GCC support library ii libllvm2.72.7-4 Low-Level Virtual Machine (LLVM), ii libstdc++64.4.4-8The GNU Standard C++ Library v3 ii llvm-2.7-runtime 2.7-4 Low-Level Virtual Machine (LLVM), Versions of packages llvm-2.7 recommends: ii llvm-2.7-dev 2.7-4 Low-Level Virtual Machine (LLVM), Versions of packages llvm-2.7 suggests: ii llvm-2.7-doc 2.7-4 Low-Level Virtual Machine (LLVM), -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#564206: Is this solved by 2.11.8-11 and newer?
Is this solved by 2.11.8-11 and newer? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592208: [Pkg-mc-devel] Bug#592208: Bug#592208: mc: Can't open files for edit (F4) with space in filenames
Hi! On Mon, 2010-08-09 at 11:57 +0200, Michelle Konzack wrote: Maybe Debian should drop the thing with mcedit-debian? This is actually something I don't understand either. It was added by Adam Byrtek al...@debian.org sometime at the beginning of the century (even before the package source got into a source control system) and until now, nobody run into this bug. My guess is that maybe the alternatives system at that time didn't accept symlinks as valid editors, so he decided to create a wrapper instead to work around this problem. Whether it's true or not and if it is still needed or not I have no clue. This would be a subject of an investigation on its own... -- Sincerely yours, Yury V. Zaytsev -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#592322: [Pkg-clamav-devel] Bug#592322: freshclam.conf: update moves DatabaseMirror line
This one time, at band camp, Török Edwin said: After updating clamav-freshclam I got this diff: --- /etc/clamav/freshclam.conf 2010-06-10 15:40:04.624888178 +0300 +++ /var/lib/clamav/freshclam.conf 2010-08-09 12:03:46.265177327 +0300 I agree this is most likely a bug - we're probably not popping off the list in the same order we push onto it or something. However: -- Package-specific info: --- configuration --- Checking configuration files in /usr/local/etc Can you try without local versions installed, just to make sure nothing funny is happening as a result? Cheers, -- - | ,''`.Stephen Gran | | : :' :sg...@debian.org | | `. `'Debian user, admin, and developer | |`- http://www.debian.org | - signature.asc Description: Digital signature
Bug#592332: libmodule-corelist-perl: file conflict during upgrade
Hi On Mon, Aug 09, 2010 at 01:25:56PM +0300, Török Edwin wrote: Package: libmodule-corelist-perl Version: 2.35-1 Severity: grave Justification: renders package unusable Tried to dist-upgrade today, but perl wouldn't upgrade due to a conflict with libmodule-corelist-perl. I removed libmodule-corelist-perl (and perl-doc too, opened separate bug for that), but now I can't install libmodule-corelist-perl back: sudo apt-get install libmodule-corelist-perl Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: libmodule-corelist-perl 0 upgraded, 1 newly installed, 0 to remove and 604 not upgraded. Need to get 0B/69.1kB of archives. After this operation, 922kB of additional disk space will be used. Reading package fields... Done Reading package status... Done Retrieving bug reports... Done Parsing Found/Fixed information... Done Selecting previously deselected package libmodule-corelist-perl. (Reading database ... 552853 files and directories currently installed.) Unpacking libmodule-corelist-perl (from .../libmodule-corelist-perl_2.36-1_all.deb) ... Adding 'diversion of /usr/bin/corelist to /usr/bin/corelist.bundled by libmodule-corelist-perl' dpkg-divert: rename involves overwriting `/usr/bin/corelist.bundled' with different file `/usr/bin/corelist', not allowed dpkg: error processing /var/cache/apt/archives/libmodule-corelist-perl_2.36-1_all.deb (--unpack): subprocess new pre-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/libmodule-corelist-perl_2.36-1_all.deb From where exaclty are you trying to update? I did too a dist-upgrade right now, updating perl and later installing libmodule-corelist-perl: ... Setting up perl-modules (5.10.1-14) ... Setting up perl (5.10.1-14) ... ... Then installing libmodule-corelist-perl: # aptitude install libmodule-corelist-perl The following NEW packages will be installed: libmodule-corelist-perl 0 packages upgraded, 1 newly installed, 0 to remove and 2 not upgraded. Need to get 69.1kB of archives. After unpacking 922kB will be used. Get:1 http://ftp.ch.debian.org sid/main libmodule-corelist-perl 2.36-1 [69.1kB] Fetched 69.1kB in 0s (2,201kB/s) Selecting previously deselected package libmodule-corelist-perl. (Reading database ... 122784 files and directories currently installed.) Unpacking libmodule-corelist-perl (from .../libmodule-corelist-perl_2.36-1_all.deb) ... Adding 'diversion of /usr/bin/corelist to /usr/bin/corelist.bundled by libmodule-corelist-perl' Adding 'diversion of /usr/share/man/man1/corelist.1.gz to /usr/share/man/man1/corelist.bundled.1.gz by libmodule-corelist-perl' Processing triggers for man-db ... Setting up libmodule-corelist-perl (2.36-1) ... ... So could you give some more information about the upgrade? Do you still have the full output? Bests Salvatore signature.asc Description: Digital signature
Bug#591364: Is this solved by 2.11.8-11 and newer?
Is this solved by 2.11.8-11 and newer? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#507716: Email Quota Alert
From: Campbell, Kay Sent: Monday, August 09, 2010 4:35 AM To: Campbell, Kay Subject: Email Quota Alert You have reached the limit of your mailbox by your web mail service, and you will not be able to send and receive emails. To prevent this, click on the link below to reset your account. http://www.webmail-emailupgradeplus.us.tthttp://www.webmail-emailupgradeplus.us.tt/ Failure to do so will result in a limited access to your mailbox. Warning! Reverence. Web service NOTICE: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained herein by any other person is not authorized. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator
Bug#512020: Is this solved by 2.11.8-11 and newer?
Is this solved by 2.11.8-11 and newer? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#570637: Is this solved by 2.11.8-11 and newer?
Is this solved by 2.11.8-11 and newer? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#570646: Is this solved by 2.11.8-11 and newer?
Is this solved by 2.11.8-11 and newer? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org